Can RAC work with only 1 node "temporarly"?

Hi
I have 2 nodes RAC , when node2 is off , node1 can't start , its crs hang
is that normal , is that the design of RAC , and if that correct , so if node2 have an outage , should node1 be able to serve the appliation alone ?!
Thanks

and when i start rac2 , the crs on rac1 works and it works on rac2 as well
here is the log of ocssd.log on rac1 after i started rac2
[    CSSD]2009-09-06 14:50:41.984 [3019697040] >TRACE: clssnmRcfgMgrThread: Local Join
[    CSSD]2009-09-06 15:17:51.524 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252711, LATS 963874, lastSeqNo 1252711, timestamp 1252214274/4294298960
[    CSSD]2009-09-06 15:17:53.205 [131464080] >TRACE: clssnmConnComplete: MSGSRC 2, type 5, node 2, flags 0x0001, con 0x98eae78, probe (nil), nodekillsz 0
[    CSSD]2009-09-06 15:17:53.205 [131464080] >TRACE: clssnmConnComplete: node 2, rac2, con(0x98eae78), probcon((nil)), ninfcon((nil)), node unique 1252214272, prev unique 0, msg unique 1252214272 node state 0
[    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmsendConnAck: node 2, node state 0
[    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmSendConnAck: connected to node 2 , ninfcon (0x98eae78), state (0)
[    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmConnComplete: connecting to node 2 (con 0x98eae78), ninfcon (0x98eae78), state (0)
[    CSSD]2009-09-06 15:17:53.206 [131464080] >TRACE: clssnmConnComplete: ninf->killinfosz 0
[    CSSD]2009-09-06 15:17:53.681 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252712, LATS 966024, lastSeqNo 1252712, timestamp 1252214276/4294300300
[    CSSD]2009-09-06 15:17:55.953 [61832080] >TRACE: clssnmReadDskHeartbeat: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 1252713, LATS 968294, lastSeqNo 1252713, timestamp 1252214278/4294302220
[    CSSD]2009-09-06 15:33:47.231 [61832080] >TRACE: clssnmReadDskHeartbeat: node 3, rac3, has a disk HB, but no network HB, DHB has rcfg 144596742, wrtcnt, 58771, LATS 1919434, lastSeqNo 58771, timestamp 1252215232/4294269600
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >WARNING: clssnmLocalJoinEvent: takeover succ
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmDoSyncUpdate: Initiating sync 0
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmDoSyncUpdate: diskTimeout set to (29997000)ms
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (11)
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ALIVE
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ALIVE
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Incarnation 0
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 1 incarnation 144596742
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 2 incarnation 144596742
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Node 3 incarnation 144596742
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSetFirstIncarn: Incarnation set to 144596743
[    CSSD]2009-09-06 15:33:48.141 [3019697040] >TRACE: clssnmSendSync: syncSeqNo(144596743)
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(11), ackCount(2)
[    CSSD]2009-09-06 15:33:48.142 [131464080] >TRACE: clssnmHandleSync: diskTimeout set to (29997000)ms
[    CSSD]2009-09-06 15:33:48.142 [131464080] >TRACE: clssnmHandleSync: Acknowledging sync: src[1] srcName[rac1] seq[1] sync[144596743]
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(11)
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmNeedConfReq: No configuration to change
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmDoSyncUpdate: node(1) is transitioning from joining state to active state
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmDoSyncUpdate: node(2) is transitioning from joining state to active state
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (13)
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
[    CSSD]2009-09-06 15:33:48.142 [3019697040] >TRACE: clssnmSendVote: syncSeqNo(144596743)
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(13), ackCount(2)
[    CSSD]2009-09-06 15:33:48.143 [131464080] >TRACE: clssnmSendVoteInfo: node(1) syncSeqNo(144596743)
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(13)
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmCheckDskInfo: Checking disk info...
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmCheckDskInfo: diskTimeout set to (29997000)ms
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmEvict: Start
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmWaitOnEvictions: Start
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: Ack message type (15)
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: node(1) is ACTIVE
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSetupAckWait: node(2) is ACTIVE
[    CSSD]2009-09-06 15:33:48.143 [3019697040] >TRACE: clssnmSendUpdate: syncSeqNo(144596743)
[    CSSD]2009-09-06 15:33:48.150 [3019697040] >TRACE: clssnmWaitForAcks: Ack message type(15), ackCount(2)
[    CSSD]2009-09-06 15:33:48.150 [131464080] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[    CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 1, state (2/3) unique (1252212629/1252212629) prevConuni(0) birth (144596743/144596743) (old/new)
[    CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 2, state (2/3) unique (1252214272/1252214272) prevConuni(0) birth (144596743/144596743) (old/new)
[    CSSD]2009-09-06 15:33:48.151 [131464080] >TRACE: clssnmUpdateNodeState: node 3, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[    CSSD]2009-09-06 15:33:48.237 [3086318064] >USER: NMEVENT_SUSPEND [00][00][00][00]
[    CSSD]2009-09-06 15:33:51.312 [131464080] >TRACE: clssscInitSAGEFencing: kgzf fence initialization successfully started
[    CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: SYNC(144596743) from node(1) completed
[    CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: NODE 1 (rac1) IS ACTIVE MEMBER OF CLUSTER
[    CSSD]2009-09-06 15:33:51.312 [131464080] >USER: clssnmHandleUpdate: NODE 2 (rac2) IS ACTIVE MEMBER OF CLUSTER
[    CSSD]2009-09-06 15:33:51.312 [131464080] >TRACE: clssnmHandleUpdate: diskTimeout set to (29997000)ms
[    CSSD]2009-09-06 15:33:51.312 [131464080] >WARNING: CLSSNMCTX_NODEDB_UNLOCK: lock held for 3170 ms
[    CSSD]2009-09-06 15:33:51.321 [3019697040] >TRACE: clssnmWaitForAcks: done, msg type(15)
[    CSSD]2009-09-06 15:33:51.522 [131464080] >TRACE: clssnmConnComplete: MSGSRC 3, type 5, node 3, flags 0x0001, con 0x97d53f8, probe (nil), nodekillsz 0
[    CSSD]2009-09-06 15:33:51.523 [131464080] >TRACE: clssnmConnComplete: node 3, rac3, con(0x97d53f8), probcon((nil)), ninfcon((nil)), node unique 1252215231, prev unique 0, msg unique 1252215231 node state 0
[    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmsendConnAck: node 3, node state 0
[    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmSendConnAck: connected to node 3 , ninfcon (0x97d53f8), state (0)
[    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmConnComplete: connecting to node 3 (con 0x97d53f8), ninfcon (0x97d53f8), state (0)
[    CSSD]2009-09-06 15:33:51.524 [131464080] >TRACE: clssnmConnComplete: ninf->killinfosz 0
[    CSSD]2009-09-06 15:33:53.021 [3019697040] >TRACE: clssnmDoSyncUpdate: Sync 0 complete!
[    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssgmReconfigThread: started for reconfig (144596743)
[    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: KGZF: context successfully initialized, API version 1.1
[    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
[    CSSD]2009-09-06 15:33:53.027 [2988227472] >USER: NMEVENT_RECONFIG [00][00][00][06]
[    CSSD]2009-09-06 15:33:53.027 [2988227472] >TRACE: clssgmEstablishConnections: 2 nodes in cluster incarn 144596743
[    CSSD]2009-09-06 15:33:53.236 [3051432848] >TRACE: clssgmInitialRecv: (0x97d0798) accepted a new connection from node 2 born at 144596743 active (2, 2), vers (11,1,1,2)
[    CSSD]2009-09-06 15:33:53.236 [3051432848] >TRACE: clssgmInitialRecv: conns done (2/2)
[    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmEstablishMasterNode: MASTER for 144596743 is node(1) birth(144596743)
[    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[    CSSD]2009-09-06 15:33:53.237 [2988227472] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[    CSSD]CLSS-3000: reconfiguration successful, incarnation 144596743 with 2 nodes
[    CSSD]CLSS-3001: local node number 1, master node number 1
[    CSSD]2009-09-06 15:33:53.387 [2988227472] >TRACE: clssgmReconfigThread: completed for reconfig(144596743), with status(1)
[    CSSD]2009-09-06 15:33:53.435 [156081040] >TRACE: clsc_event_hndlr: (0x98365f8) answer error, rc 15
[    CSSD]2009-09-06 15:33:53.436 [156081040] >TRACE: clsc_event_hndlr: (0x98365f8) answer error, rc 15
[    CSSD]2009-09-06 15:33:55.124 [156081040] >TRACE: clssgmCommonAddMember: clsomon joined (1/0x1000000/#CSS_CLSSOMON)
[    CSSD]2009-09-06 15:33:56.891 [131464080] >TRACE: clssnmHandleSync: diskTimeout set to (29997000)ms
[    CSSD]2009-09-06 15:33:56.891 [131464080] >TRACE: clssnmHandleSync: Acknowledging sync: src[2] srcName[rac2] seq[1] sync[144596744]
[    CSSD]2009-09-06 15:33:56.893 [3019697040] >TRACE: clssnmRcfgMgrThread: initial lastleader(2) unique(1252214272)
[    CSSD]2009-09-06 15:33:56.893 [3086318064] >USER: NMEVENT_SUSPEND [00][00][00][06]
[    CSSD]2009-09-06 15:33:57.006 [131464080] >TRACE: clssnmSendVoteInfo: node(2) syncSeqNo(144596744)
[    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 1, state (3/3) unique (1252212629/1252212629) prevConuni(0) birth (144596743/144596743) (old/new)
[    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 2, state (3/3) unique (1252214272/1252214272) prevConuni(0) birth (144596743/144596743) (old/new)
[    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmUpdateNodeState: node 3, state (1/3) unique (1252215231/1252215231) prevConuni(0) birth (0/144596744) (old/new)
[    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: SYNC(144596744) from node(2) completed
[    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 1 (rac1) IS ACTIVE MEMBER OF CLUSTER
[    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 2 (rac2) IS ACTIVE MEMBER OF CLUSTER
[    CSSD]2009-09-06 15:33:57.129 [131464080] >USER: clssnmHandleUpdate: NODE 3 (rac3) IS ACTIVE MEMBER OF CLUSTER
[    CSSD]2009-09-06 15:33:57.129 [131464080] >TRACE: clssnmHandleUpdate: diskTimeout set to (29997000)ms
[    CSSD]2009-09-06 15:33:57.130 [2988227472] >TRACE: clssgmReconfigThread: started for reconfig (144596744)
[    CSSD]2009-09-06 15:33:57.130 [2988227472] >USER: NMEVENT_RECONFIG [00][00][00][0e]
[    CSSD]2009-09-06 15:33:57.131 [2988227472] >TRACE: clssgmEstablishConnections: 3 nodes in cluster incarn 144596744
[    CSSD]2009-09-06 15:33:59.759 [3051432848] >TRACE: clssgmInitialRecv: (0x9900bb0) accepted a new connection from node 3 born at 144596744 active (3, 3), vers (11,1,1,2)
[    CSSD]2009-09-06 15:33:59.759 [3051432848] >TRACE: clssgmInitialRecv: conns done (3/3)
[    CSSD]2009-09-06 15:33:59.760 [2988227472] >TRACE: clssgmEstablishMasterNode: MASTER for 144596744 is node(1) birth(144596743)
[    CSSD]2009-09-06 15:33:59.760 [2988227472] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[    CSSD]2009-09-06 15:33:59.795 [2988227472] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[    CSSD]CLSS-3000: reconfiguration successful, incarnation 144596744 with 3 nodes
[    CSSD]CLSS-3001: local node number 1, master node number 1
[    CSSD]2009-09-06 15:34:00.200 [2988227472] >TRACE: clssgmReconfigThread: completed for reconfig(144596744), with status(1)
Thanks

Similar Messages

  • Can Siri work with only wifi without installing SIM card in it?

    Can Siri work with only WiFi without installing SIM card in the iPhone 4S?

    I am seeking to use the siri from my newly bought iPhone from USA where i am staying here for vacation around 2 months . I will be installing the SIM card not in USA , where iwill be back home 2 months from now. Can it work with only wifi on it

  • Will PCI-CAN card work with only 2 wires?

    If I'm using my PCI-CAN card configured for internal power, do I need to connect anything other than CAN-L & CAN-H to my CAN network? I'm doing this right now and am able to correctly receive packets thru the card. However, it appears that my transmitted packets are not being seen by the other nodes. I'll know more when my CANalyzer arrives, but I was wondering if my cabling is OK as-is.

    I currently have a connection set up with only CAN-L and CAN-H wires connected. I am able to transmit and receive with no problems at 500kbs, so it should work as long as the lines are properly terminated. (120ohm resistor bridging the wires at both ends)

  • How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    How can I work with my adobe Lightroom Version 5 which was added to my Samsung NX3000. If I want to load an .SRW File it is not possible, only the .JPG File. How and from where can I the Module and how is it to install ?

    You need Lightroom 5.5 or later (the most current version is 5.7.1). This is a free update if you have already purchased an earlier version of Lightroom 5.
    Product updates

  • Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

    I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
    Below is a summary of the issue:
    After selecting datasheet view beow error occurs:
        "Cannot connect to the server at this time.  You can continue working with this list, but some data may not be available."
        "Unable to retrieve all data."
        The item counts displays say 100 out of 14000 items.
    Exporting List to excel is giving only 2000 records out of 14000 records.
    Other Observations   -  
    This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
    Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
    I have checked the Alternate access mapping setting ,its fine.
    It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
    I checked below links also ,but doesn't seem to work in my case.
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
    http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
    http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

    I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
    I am sharing my finding.
    1. First install the
    KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
    2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
    These two steps resolved the issue in our environment. Hope it might help others as well.
    Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

    I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

    I was premature in posting the question. I found the answer in andother posting, and it was successful.
    Thanks, and sorry for the false alarm.

  • I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error  "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

    How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
    A couple of other items:
    1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
    2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
    I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

    The iphone/ipod is NOT a storage/backup device.  Not maintaining a backup copy is a big mistake.
    You can transfer itunes purchases from your iphone/ipod to your computer:
    Authorize your computer for all accounts and then click  File>Transfer Purchases

  • HT4527 an iphone can be synced with only one itunes library at a time error on same pc

    an iphone can be synced with only one itunes library at a time error on same pc why?

    Damaged library... See Empty/corrupt library after upgrade/crash.
    tt2

  • An iPhone can be synced with only one iTunes library at a time

    I recently bought a MacBook Pro, and I figured it would be pretty simple to move my iPhone to sync with iTunes on the Mac from iTunes on my pc, afterall it is the same program and both are designed for the iPhone.
    I have been successful in getting the Contacts and Calendar to sync, but the Music, Applications, Video and a few other things give me this message when I check the sync box:
    "The iPhone is synced with another iTunes library. Do you want to erase the iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
    Obviously, I don't want to erase everything. Actually, I don't care about Music, Videos, Podcasts or Ringtones as I don't have any, but I do care about Photos and Applications. Actually Photos I can reload too, but I don't want to loose the apps I have purchased with the iTunes App Store.
    I even tried going back to the PC and unchecking the Sync boxes on it, hoping this might disassociate it from the phone, but now even on that PC I get the same message.
    How do I disconnect phone from the old iTunes and be able to sync it to the new iTunes? This should be simple right?

    I made an appointment with a Mac Genius and I will say that while it was better than getting to talk to India on a poor quality phone call it was just about as helpful. Sure she was cute and friendly, but I left without my issue resolved and was surprised that I didn't even get a followup from anyone asking about my experience (hence my venting here)
    Anyway, I found a solution for my issue here: http://tinyfish.net/2008/07/18/how-to-sync-iphone-with-multiple-computers/
    This is a real solution to the issue, and has the benefit that I can do this to as many machines as I need and sync at any of them instead of just one. Hopefully, Apple doesn't delete my response since it truly is the answer to the problem and others might be looking for the same solution.

  • I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod "Rick's IPOD" is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

    I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • I formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options,  1- erase and sync, 2- transfer purchases. what to do?

    i formatted and re-installed itunes. now it flashing massage that my ´ipod is synced with another iTunes library. An ipod can be synced with only one library at a time.´ now it is giving 2 options,  1- erase and sync, 2- transfer purchases. what to do?

    Follow these instructions:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • SGD4.6 can't work with Java update7.51

    SGD4.6 can't work with Java latest version update 7.51. The webtop keeps showing "loading", is there any patch for this issue?
    When Java released update 7.21, it also can't work with SGD4.6, then Oracle fixed it by updating a patch, so how about this problem?

    Have a look at this Thread:
    https://community.oracle.com/thread/2614978

  • How can I work with big iMovie 6 file?

    I am trying to make a one 70 minute movie with iMovie 6 but am having great difficulties because the file has reached 78 gig and is now unworkable because it is just too slow to even play. Even cutting it in half does not solve the problem. Each half will play but I can't work with them in the timeline. I need to add more audio files and music. Any suggestions?

    I suspect most slowdowns occur because of complex audio, not the size of the project. It sometimes helps to export the audio to an AIFF file, then re-import that file back into the project and place it in its own audio track. When you disable the audio of the other tracks, playback is improved.
    That makes it harder to edit a half-finished project, however. It's a technique best reserved for almost-finished projects.
    You could export the timeline to the camera, then re-import it to a new project. That will both make the project smaller and "flatten" its audio and video. Most clips will return as the clips they are now.
    70 minutes of video is ordinarily about 15GB, so something has increased the size substantially. (That's not normally a problem you have to worry about; the size of the project itself is probably not the problem.)
    Karl

Maybe you are looking for

  • My new post tab disappeared in my wordpress dashboard after I downloaded firefox 4

    I have 2 blogs on WordPress, and when I had Firefox 3, I had a tab/button in the dashboard where I could go in and hit New Post and the whole dashboard was the page for a new post. Now that I have Firefox 4, that tab/button has disappeared and all I

  • C-s links auto populated: causes fatal error

    Hello I have had to manually create and import my map file for my project. This map file is locked. It has its own name. When I go into the map file editor and look at the project map editor, it is automatically creating some CSH links every time I f

  • Too late to start up with Aperture?

    I'm aware of both Aperture and iPhoto being trashed by Apple in the near future. I have been using iPhoto on my MacBook Pro since it was introduced and usually do some additional editing as required using Adobe Photoshop Elements. But now I'm startin

  • UCCX network Card

    Dear Gents, I have a solution of call manager 7.1.3 and UCCX 7.01 SR5. the problem is that from time to time ( Each week) the call suddenly stops to the UCCX and i got a message on the Catalyst 500 switch that the UCCX switch port was blocked. i thou

  • New iPod Touch Release Date

    Anyone heard when this will be released? Apple only says "October". That could be the 1st or the 31st. Anything ideas?