Can someone tell me what's wrong with my router?

i was just using my router half-hour ago and it was working fine......i come back on a little bit and it is not working anymore........my wlan and dmz light in front of my WRT54G router won't light up and it keeps telling me that my connection is limited...i already reset both router and cable modems like 100 times already..is there any way i could fix this?

okay... if you are using cable internet connection, try restting the router back to factory default settings by pressing reset butoon on the back panel of router, power cycle the n/w by unplugging power cable of router and modem, wait for couple of minutes and power up the modem first once modem is rebooted power up the router, check internet works or not, if still doesn't work let me know which internet service are you using also tell me version no of WRT54G router so that i can tell you step by step configuration of router...

Similar Messages

Can someone tell me what's wrong with this LOV query please?

This query works fine..
select FILTER_NAME display_value, FILTER_ID return_value
from OTMGUI_FILTER where username = 'ADAM'
But this one..
select FILTER_NAME display_value, FILTER_ID return_value
from OTMGUI_FILTER where username = apex_application.g_user
Gives the following error.
1 error has occurred
* LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query.
Thanks very much,
-Adam vonNieda

Ya know, I still don't know what's wrong with this.
declare
l_val varchar2(100) := nvl(apex_application.g_user,'ADAM');
begin
return 'select filter_name display_value, filter_id return_value
from otmgui_filter where username = '''|| l_val || '''';
end;
Gets the same error as above. All I'm trying to do is create a dropdown LOV which selects based on the apex_application.g_user.
What am I missing here?
Thanks,
-Adam

Can someone tell me what's wrong with this method

public boolean drop(int col, int piece) {
          if (isLegalMove(col)) {
               for (int r = 0; r < getNumRows(); r++) {
                    if (mySpaces[r][col] == EMPTY) {
                         mySpaces[r][col] = piece;
                         return true;
          } else
               return false;
     }it always asks that I need to return something, what should I do??

public boolean drop(int col, int piece) {
    if (isLegalMove(col)) {
        for (int r = 0; r < getNumRows(); r++) {
          if (mySpaces[r][col] == EMPTY) {
            mySpaces[r][col] = piece;
            return true;
    } //else <--- remove the else
    return false;
}

Can someone tell me what's wrong with my threading code

I got some code from a Java book on how to create a simple threading application. This is the exact code from the book but for some reason it gives me an error that non-static variables can not be referenced from static content. How can I reword this to work?
<CODE>
package multithread;
import java.io.*;
import java.util.*;
public class MultiThread {
class CountDownEven extends Thread {
public void run() {
for (int i = 6; i > 0; i -= 2) {
System.out.println(this.getName() + " Count" + i);
Thread.yield();
class CountDownOdd extends Thread {
public void run() {
for (int i = 5; i > 0; i -= 2) {
Thread.yield();
public static void main(String[] args) {
try {
CountDownEven count1 = new CountDownEven();
CountDownOdd count2 = new CountDownOdd();
count1.start();
count2.start();
catch (Exception e)
</CODE>

One possible solution:public static void main(String[] args) {
     try {
          MultiThread m = new MultiThread();
          CountDownEven count1 = m.new CountDownEven();
          CountDownOdd count2 = m.new CountDownOdd();
          count1.start();
          count2.start();
     } catch (Exception e) {
}

Can someone tell me what's wrong with this code....

I apologize in advance for anyone who isn't a Steelers fan...
import java.awt.*;
import javax.swing.*;
public class myJPanel extends JPanel
     public myJPanel()
          setBackground(Color.white);
     JLabel label1 = new JLabel();
     label1.setText("Ben Roethlisberger #7 Age 23");
     add(label1);
     JButton jb1;
     ImageIcon imageBen = new ImageIcon("Ben.JPG");
     jb1 = new JButton(imageBen);
     add(jb1);
     JLabel label3 = new JLabel();
     label3.setText(whatIsUp());
     add(label3);
     for(i=0;i<20;i++)
     String whatIsUp()
          int n = 0;
          double nn = 0;
          String b = "......";
          nn = (Math.random() * 6);
          n = (int)nn;
          if (n == 0)
               b = "Ben Roethlisberger throws a touchdown pass to Hines Ward.";
               JButton jb2;
          ImageIcon imageHines = new ImageIcon("Hines.jpg");
          jb2 = new JButton(imageHines);
          add(jb2);
          if (n == 1) b = "Ben Roethlisberger throws a touchdown pass to Antwaan Randle El.";
          if (n == 2) b = "Ben Roethlisberger throws a touchdown pass to Heath Miller.";
          if (n == 3) b = "Ben Roethlisberger throws a touchdown pass to Cedrick Wilson.";
          if (n == 4) b = "Ben Roethlisberger throws a touchdown pass to Jerame Tuman.";
          if (n == 5) b = "Ben Roethlisberger hands off to Jerome Bettis for a touchdown.";
          return b;
Everything is ok if i take the for loop out, but for some reason everything just gets screwed up if I have that for loop in there. And these are the error messages I'm getting.
'illegal start of type (line 21)' and '<identifier> expected (line 48)'
Thanks in advance for your help...

Hey I'm sorry but this is only my second week doing
Java. Do you think you could explain that more or
give me an example??
Bad Version (like yours but simplified)
public class Sample{
public static void main(String args[]){
    for(int i=0;i<20;i++){
      String whatIsUp(){
         return "Doc";
      System.out.println(?);// I am not even sure how to write this voodoo part
}Good Version
public class Sample{
public static void main(String args[]){
    for(int i=0;i<20;i++){
      String aString = whatIsUp();
      System.out.println(aString);
String whatIsUp(){
    return "Doc";
}

I have i pad 2 ios 4.3.1 i want to update it to 4.3.3 but i get error msg 3194 can you tell me what's wrong with apple some people talking about apple don't veryfiy 4.3.3 anymore thanks alot

i have i pad 2 ios 4.3.1 i want to update it to 4.3.3 but i get error msg 3194 can you tell me what's wrong with apple some people talking about apple don't veryfiy 4.3.3 anymore thanks alot

4.3.5 is the current version, so that is the version that iTunes will download, not 4.3.3
In terms of error 3194, have you got the latest version of iTunes on your computer ? - http://support.apple.com/kb/TS3694#error3194

Can anyone tell me what's wrong with my queue or producer consumer loop?

A Labview engineer helped me with the overall structure of my program, necessitated by the fast data sample rate and post processing requirements. He recommended the producer/consumer loop and using one of the example files (Cont Acq graph voltage - int clk) to do the actual data acquistion. So I put together the loop and go my two channels of data acq going in the producer loop. However, nothing's getting picked up in the consumer loop and none of my data gets displayed over there.
Anyone care to take a look at it and let me know what I'm doing wrong?
Solved!
Go to Solution.
Attachments:
P-C Yanmar Program.vi ‏296 KB

Your Enque Element should be inside the while loop where you aquire the data. As it is now, the data has to stop being aquired before you send the last set of aquired data.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Could someone tell me what is wrong with AS 3.0

I'm moving a movie clip that is off the stage and acts as a
popup window to the visible area. then i'm animating it to cover
the entire stage size. then moving a box in.
This thing is very very buggy. It works about 70% of the time
correct. I have the variables of the size traced and they are
ALWAYS correct. However the animation doesn't reflect this.
Sometime the box won't animate the width, sometimes the height, and
sometimes it doesn't show up at all. What is going on?
Thanks!

your code is correct (with the assumptions given above). you
can test it outside your current project and verify that it works.
i just finished a project where i ported an as2 application
to as3. that application used many tweens and i kept them in the
as3 version. i did run into some problems with the tweens that i
solved by giving the tweens different names.
for example, if you call layersWindowIn() twice, with the
second call occurring before the first has completed, you'll
probably run into problems. is that when the problems occur?

Can anyone tell me what is wrong with the simple sql?

Hi,
I have a simple SQL (see attached). It returns records when it does not include the Order By sorting clause. However, if it includes the Order By clause, Oracle says no data found. Anyone can give me some ideas what could cause the problem?
Thanks in advance.
SELECT ih.item_key, e.episode_key, e.episode_date, wp.work_package_key, p.patient_name, c.codes_key
FROM work_package wp, episodes e, item_header ih, patients p, codes c, station_element se, station_data sd
WHERE wp.work_item_key = e.episode_key
and e.episode_key = ih.item_key
and ih.logical_parent_key = p.patient_key
and e.episode_type = c.code_value
and wp.asgn_station_key = se.item_key
and se.station_name like 'DICT FIX%'
and sd.station_key = wp.asgn_station_key
and (sd.facility = '0' or sd.facility = 1)
and wp.on_hold <> 'Y' and c.code_type = 'CEPT'
and c.setup_group = 1
ORDER BY e.episode_date, e.medrec_no;

Hmmm...can you post a SQL Plus session that demonstrates this?

While working in multi camera editing in FCP X, having only 2 angles, after cutting for 30 minutes, the editing starts slowing down gradually until it becomes unbearably slow. Can someone tell me what is wrong?

This is the second time I am using the multicamera editing mode. The first time I used it with 2 angles of HD 720p and it worked perfectly. This time I am working with standard definition vodeo and is giving me this problem.

This is my pet checklist for questions regarding FCP X performance.
Make sure you're using the latest version - FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.3.
First, check that you have at least 20% free space on the Hard Drive that your System and your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
If you are short of drive space, use ProRes 422 Proxy (FCP X Preferences > Playback) - but remember to select 'Original or Optimised Media' just before you export your movie, otherwise it will be exported at low resolution.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to a fast (Firewire 800 or faster) external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

My iPad Id is disabled and I can't seem to fix it can someone tell me what's wrong?

Please this is bothering me for sometime. Currently I cannot download any new apps but I can still use my old ones. Every time i try to get an app it says that my I'd is disabled.

See if you can get the account re-enabled : http://iforgot.apple.com

Please can someone tell me what's wrong in this code

1var a=0;
2function main(){
3var inFolder = Folder.selectDialog("Please select folder to process");
4//Save the Current Preferences
5var startRulerUnits = preferences.rulerUnits;
6preferences.rulerUnits = Units.PIXELS;
7//Get all the files in the folder
8var filelist=inFolder.getFiles()
9n=filelist.length;
10//Open each file
11for(a=0; a<n; a++){
12// The fileList is folders and files so open only files
13if (fileList[a] instanceof File) {
14open(fileList[i])
15var docName = app.activeDocument.name;
16app.activeDocument.flatten();
17activedocument.save();
18}
19}
20}
21main();
Says the error is "filelist is not recognized". on line 14. I thought I had fully defined 'filelist' on line8
I thought filelist was a one-D array variable.
Peterkal

Also, in lines 8 and 9 you use a variable called "filelist" but in lines 13 and 14 you call it "fileList" (notice the capital-L).
JavaScript is case-sensitive, so you must be consistent with your variable names throughout.

Can someone tell me i did wrong with this part of my code?

choice = Integer.parseInt (usersChoice);//Math Conversion
Input = JOptionPane.showInputDialog(null, "How many would you like?[" + Quantity +"]: ");
price[Quantity] = Float.parseFloat(Input);//conversion from string to int
JOptionPane.showMessageDialog(null, "You want: " + price[Quantity]);
for (Quantity=0; Quantity<100;Quantity++)
When i try to compile i am getting an error "incompatible types" and operator > and ++ cannot be applied to int[],int and int[]

When i ask a question of my instructor i am lucky if i get a response 48 hrs later, and as for asking my peers, most of them are just as confused as i am. All i am doing is trying to learn i am sorry if you feel that asking on this forum is wrong, but like i said i am attemtping to learn and i figured that who better than to ask then a bunch of people who know Java like the back of their hands.

When laptop booths there is a folder with a question mark. Can someone tell me whats wrong?

When laptop booths there is a folder with a question mark. Can someone tell me whats wrong?

The Mac cannot find the hard drive or a valid boot folder.
You can try to reboot with Command and R and hold down until you see recovery partition. Launch that and then in the menu bar at the top look for Disk Utilities. Run that and see what it says when you scan your hard drive,
Any errors there are bad. If it can't even read the drive that is worse.
I suspect with the ? issue you will be reformatting and reinstalling OS X after getting a new hard drive.

I am not able to download the newest version of ibooks- the message is ibooks cannot be downloaded at this time- can someone tell me what I am doing wrong?

I am not able to download the newest version of ibooks- the message coming up says ibooks cannot be downloaded at this time- pls can someone tell me what I am doing wrong?

Hi Suchvas,
Thanks for visiting Apple Support Communities.
If you are not able to download an iBooks update from the App Store, start with these troubleshooting steps:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
Jeremy

Can someone tell me what's wrong with my router?

Similar Messages

Maybe you are looking for