Can't access Blog

New computer, Mac Book Pro with latest version of IWeb. Last night I tried transferring information from my old powerbook. Not only was I not successful, but the power book bit the dust. I have backups where I published to folder from my blog, but a search does not pull up a domain file. Can I get this new computer with upgraded IWeb to use what I have on .mac already?

During the information transfer my old powerbook hung on the last few files. Now it will go thru the startup process but when the desktop should appear, I just get a blue screen. I am thinking if I go hunt down my startup disks that I might could access the information. I don't have libraries and all backed up.
Once I read a little, I decided to completely clean my new computer off rather than have the old power pc stuff cluttering it, so I erased all that it had sucked off the first one. At that point, I had not noticed that the power pc only behaved as if it was starting up and not really mounting any information.

Similar Messages

How can we access workflow status column out of the box (OOTB).

I have a problem that few of the workflows in production are failed at last stage have status set to "Workflow Errored". Someway I have fixed issue with workflow but I need to modify this status.
I tried adding a custom column and access workflow status column so that I can modify custom column as I want, and show this in views.
But I can't access this without using code, anybody has any idea?
My task is to modify workflow status which are errored out.

You can rerun the workflow once you've fixed it up. This'll change the status to something more successful.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

IPhone 4s with ios 6 shows full wifi signal but can't access to the internet while other idevice can

Hi everyone,
I updated my iphone 4s to ios 6 a few months ago and there was no problem until I change my sim card to other carriers last two days. This second sim card is the same sim card that I used it earlier this year with no problem. But the problem I face is when my iphone goes to sleep mode I realised that I can't receive any push notification from imessage, Whatsapp, and Line. When the phone is awake the wifi signal is back and I have to go to each application in order to get the message. I have tried the following methods but it didn't work: reset all network settings, restore as new iphone, push home and power button together, switch off my iphone, turn on airplane mode, and even change my router. At the moment I have restored my iphone as new for the 5th times.
Now the problem is worsen, after the phone is sleep for about 5 minutes and when I awake my iphone it shows the wifi signal. But I can't access to the internet at all. It shows no working internet on Whatsapp. Safari can't load any web page, the weather app can't update temperature etc. I have to switch off and switch on wifi in setting menu so that I can use the internet. And when I leave my iphone four about 5 - 10 minuetes then the problem start again. While I can't access to the internet on my iphone 4s, I used my dad's iphone 4s with ios 5.0.1 and it works just fine with the internet. My laptop can also access to the internet with the same wifi network but not my iphone.
Does anybody know what's going on with my iphone 4s? Is it the bug from IOS 6 or my iphone is broken? Please help me.
Thank you.

Any update will cause problems for a few users. And those users will rush here and post "the sky is falling" stories about their experience. The 99.99% of people who have no problems after an update won't bother to post here; indeed, most of them don't even know ASC exists. FWIW, I had no problems with iOS 7 on my 4S. Your problem is most likely not related to iOS 6, but you should probably update anyway. For addressing the battery issue see this outstanding article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

How can I access nested symbol details such as offset and name dynamically

Hey friendly Edge Animate experts!
I'm very new to Edge Animate, and appear to have run into some startup problems that I am unable to find a good way around.
I have setup a small demo project with several levels, and am trying to get details from symbols on 2nd or 3rd level dynamically with little luck.
To test that I fetch the correct details, and have the pathing correct, I have added a text option in each symbol.
I can access and alter the value of the text fields - but I can't access the symbol data such as offset, position, ID, name etc.
For simplicity, imagine a project with a symbol "FirstLevel" that has a symbol "SecondLevel" inside it.
"SecondLevel" has three symbols that each have 2 text layers FirstTextField and SecondTextField in addition to a symbol that has a png image.
My code:
// Get all the 3rd level symbols that I want to get details on (works perfectly)
var childSymbols = sym.getComposition().getStage().getSymbol("FirstLevel").getSymbol("SecondLevel").getChild Symbols();
// Loop through all the children (works perfectly)
for(var i=0; i<childSymbols.length; i++){
// Add the looping counter to a text field just to test if all is ok (works perfectly)
childSymbols[i].$("FirstTextField").html(""+i)
So... I can access the symbols, change a text without problems.
Now i would like to get the symbol details such as offset().left or position().top
and add that info to SecondTextField and I just can crack that nut!!!
childSymbols[i].$("SecondTextField").html(""+childSymbols[i].position().left); // not working
childSymbols[i].$("SecondTextField").html("TEST VALUE"); // working, TEST VALUE is shown
// Not working
var ChildPos = sym.getSymbol(childSymbols[i]).position();
childSymbols[i].$("SecondTextField").html(""+ChildPos.left);
// Not working
childSymbols[i].$("SecondTextField").html(""+getVariable(childSymbols[i]).position().left ));
I have tried this and that for hours and hours
I feel that i have searched high and low
I must have tried all the wrong options
But I'm still looking for the one correct way to do thi...
Any help, tips, tricks or read-up directions would be much apreciated.

Hey Darrell,
Thank you very much for taking the time to look into this.
I have uploaded a simplified version (without any png files) at:
http://www.lokehansen.com/blog/wp-content/uploads/2012/12/helpwanted.zip
Best wishes
Loke Krongaard Hansen

How can I access revisions of a document using OpenXML sdk library?

How can I access revisions of a document using OpenXML sdk library?
Thanks in advance.
Regards,
Akanksha.

Hi Akanska
The following articles should give you a basic understanding of how to work with Revisions:
https://msdn.microsoft.com/en-us/library/office/cc536011.aspx
https://msdn.microsoft.com/en-us/library/ee836138%28v=office.12%29.aspx?f=255&MSPPError=-2147217396
http://blogs.msdn.com/b/ericwhite/archive/2009/09/28/source-code-available-complete-implementation-of-accept-all-changes-tracked-revisions-in-open-xml-documents.aspx
Cindy Meister, VSTO/Word MVP,
my blog

Can't access "my recipes" on Food Network

I can't access "my saved recipes" on the Food Network site on one log in. On another log in-same MacBook Pro-I can. I'm guessing a setting may have been switched somewhere, but haven't been able to solve this. Help would be appreciated!

Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/

Can I access Webi queries and Xcelsius dashboards from SAP portal?

Hello,
Can I access Webi queries and Xcelsius dashboards from SAP portal? And how?
Thanks

Portal Part 1
/people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
Portal Part 2
/people/ingo.hilgefort/blog/2010/03/30/sap-businessobjects-enterprise-sap-enterprise-portal-part-2-of-4
Portal Part 3
/people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
Portal Part 4
/people/ingo.hilgefort/blog/2010/04/21/sap-businessobjects-enterprise-and-sap-enterprise-portal--part-4-of-4
Ingo

Can't access cluster via SQL Server Mng Studio unless node has ownership

Hi:
We have Windows and SQL 2008 R2 in a 2 node cluster. Failover and failback work like a dream. All the 'lights' are green. But we can only access the cluster when we're on the node that has ownership. I've deleted all DNS entries and successfully recreated
them via ipconfig /registerDns from each node, shutting down, restarting the actual cluster and taking the application and service offline then back on line. All DNS records got recreated perfectly. Cluster error log doesn't show anything when we
can't connect either. We can also ping all IPs, Hostnames and Clustername.

Hi g_machuca,
According to your description, you want to implement failover and failback in SQL Server cluster environment. We need to verify if The cluster group containing SQL Server can be configured for automatic failback to the primary node when it becomes available
again. By default, this is set to off. First you set a preferred owner for the SQL Server service in a clustered environment; To ensure the service or application automatically moves to the correct node, select “Allow Failback” under the Failover tab. .
Auto failback saves you from having to make this change manually; however it will restart the SQL Services when it automatically fails back. Or if you don’t want to configure auto failback you’ll want to make sure that you manually fail the services
back to the more powerful node after the system has come back online.
There are details about failover cluster allows automatic failback, you can review the following articles.
http://www.mssqltips.com/sqlservertip/2672/managing-a-windows-and-sql-server-cluster-using-the-failover-cluster-manager-tool/
http://blogs.technet.com/b/rob/archive/2008/05/07/failover-clustering.aspx
For more information about troubleshooting Windows Server 2008 R2 Failover Clusters, you can review the following article.
http://windowsitpro.com/windows-server-2008/troubleshooting-windows-server-2008-r2-failover-clusters.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

I can't access any of my files or even a new blank project

I'm working with RH 8. I have also installed the critical updates.
I cannot access any of my RH projects. At first I could access the project I'm currently working on. I could not access any of my other projects.
So, I reinstalled the critical updates. However, when I reinstalled I only got the window above. I clicked next.
After i reinstalled I can't access any of my projects, including the one I could access before. I cannot access RH and just create a new project either. Can someone help.
Thank you.
I also got the message that my current file was more current than the version of RH. It seems that the update didnt' take.

Hi there
Question here. What is your operating system? Windows Vista or 7 maybe?
I ask because you said your projects were on your C drive. Normally that's excellent and where you want projects to be. But I've found that if I am using Vista and I try to save something to the root ( C:\ ) from some applications, I'm blocked and see issues with the application. So my thought is that if you are attempting to work directly from the root and you are on Vista, that may explain things.
Normally I suggest folks create a folder named Projects right off the root of C:\ and create a folder inside the Projects folder to house any project.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

I'm an admin of this site, but now can't access some pages in Project Server 2013 e.g. Project center, PWA setting

it may be your browser. CHeck the folloinwg
1) Turn on Compatibilty mode
2) Security Options / Make it a local trusted site
3) Turn of Protected Mode in the browser under Security
and have you tried it from Chrome
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

After 30min of having FF open when I close a tab a msg pops up -Javascript application "Unable to clean current element: TypeError: can't access dead object"

After around 30min of having FF open when I close a tab a message pops up:
Javascript application
Unable to clean current element: TypeError: can't access dead object
OK
It randomly stops showing the message for periods of about 30 min.

hello MichaelStevens, this is very likely caused by one of your addons (maybe one which is performing a certain action every 30mins).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
https://blog.mozilla.org/addons/2012/09/12/what-does-cant-access-dead-object-mean/

Can't access any shares on the network

Hi,
As the topic says, I can't access any shares on the network. I've tried connecting to a Iomega NAS, Windows 7 laptop, and a macMini. In the "Shared" list in finder im able to see all the shares, I'm able to click them and see the folders they share, but when I try to open one of the folders I get an error, no matter which share it is:
+"The operation can’t be completed because the original item for “<folder name>” can’t be found."+
The shares can all access each other, and they can access my folders. I just can't access any folder on the network.
I got a mac pro with osx 10.6.2 and have all the latest updates.
How can I solve this problem?
Thanks.

Well, try this (I was able to fix my with these steps):
Go Utilities > Disk Utility
Select your Startup Disk, e.g. Macintosh HD
Then, under the First Aid Tab, click Verify Disk Permissions.
If there are errors, then click repair Disk Permissions.
After it is done, restart the computer and see if your problem is resolved.
I hope this help.
Zeke
www.ZekeYuen.com/blog/

Can't create blogs for users created in LDAP directory

I have an LDAP directory set up on an Open Directory Master and use it for user management. I want to allow users to create blogs off of the main web site. However, when I try to create a blog, it won't authenticate to any of the LDAP users, only the local user (of which the administrator account for the server is the only one).
LDAP directory users can access their personal websites, though (http://mydomain/~user).
Does anyone have any ideas how I can get the blog portion of the web site to allow my LDAP users to create a blog?
Thanks.

Sorry, I should have mentioned I am using Leopard Server (10.5.5).

I can't access the game injustice anymore!

When I'm signed in with my Apple ID, i cannot access the game "injustice" anymore. This issue started two days ago. Before that I had no problems playing the game.
I can only access the game when I'm signed out of my Apple ID, the same issue occurs in both my iPad and iPhone. Therefore, this got me thinking that it could be a problem with my Apple ID.
Is there anyone that recognize this issue please help me out.
Kind regards,
Robin

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
https://reportaproblem.apple.com/
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Can't Access Myspace Profiles via Safari/Firefox/Explorer/Opera... help?

Hi,
I can't access 95% of all the profile pages I try to view on Myspace. It starts loading and then I get the spinning beach ball. I did some experimenting, and I turned off Javascript on Safari and they started loading again, but I can't access a lot of features-- I couldn't even log into this discussion without Javascript!! I think my javascript is corrupted. Is there a way to replace my javascript thingy? I'm really upset about this. My software is all up to date, as are my permissions. Any advice would be helpful.
~Patrick

Same here. Permissions repaired, PlugIns removed and reinstalled one after another (InputManagers: Chax, Menu Extra Enabler, PicLens, SafariBlock, SafariPlus, SIMBL), reinstalled flash, DivX, Flip4Mac, Perian. All up to date. But whatever I do, I can't access (most of the sites of) MySpace, YouTube, etc.! No difference whether I use Safari, FireFox or Opera: The processor speeds up to 100% and the beach-ball goes spinning round and round and… The only (but radical) solution than is pressing the power-button! I had this problem with Safari 2, I have it with Safari 3, and I definitely don't know what to do! Hoped with every update, but…
I don't know if that's a problem with flash or JavaScript or something completely different, but I can't see why Apple does not get that fixed! I mean, I'm really not the only one being frustrated by surfing the web while more and more blogs integrate YouTube-Videos… That's no fun using a mac!

Can't access Blog

Similar Messages

Maybe you are looking for