Can't access Network share from Windows 8 computer

I have a clean install of Windows 8 x64 running in a workgroup environment. I can access multiple computer/NAS shares except one share off a partifular NAS. This share is accessible from other computers and the other shares on the NAS are accessible from
this Windows 8 computer. I have cheked the credentials and they are fine, added them under the credential manager, tried to map a drive and selected use other credentials etc but it continually says "Windows cannot access \\ComputerName\ShareName"
you do not have permission. I have permission and nothing is wrong with the permissions or the server. This is driving me crazy if anyone could help it would be greatly appreciated.
I have tried:
1. Mapping drive with ip address e.g. \\ip address\sharename
2. disabled ipv6, made sure netbios enabled, made sure client for ms networks enabled.
3. Setup a new account on server, doesn't work either.
4. All sharing options enabled. I even modified the permissions on the share for "everyone" full access and it still didn't work.
Has to be something with this windows 8 machine.

Dear all,
Hi am using 2012 r2 server and i have created share folder ,and added the user Id in that share folder but while accessing in windows pc (local admin) its opning all share folder , but its not asking password if i click in share folder it shows you do not have
permission to access . but till lastweek it was worked fine . and if i tried in administrator login its asking password authentication. Please help me ASAp.
Thanks
mahamad
8884209555

Similar Messages

I can't access folder share in WIndows Server 2012 R2 from windows 8.1

i have a strange case:
I have a Windows Server 2012 R2 machine with a shared folder. Accessing this folder using a Win7, Win8,
Win 2008 R2 machine using \\servername works fine but form windows 8.1 or windows
2012 r2 i can't so any one can help me.

Hi,
Would you please let me know the complete error message that you can find, when can’t access to the share folder
that host in the Windows Server 2012 R2?
If you logon the Windows 8.1 (or server 2012 r2) with administrator account, will encounter the same issue?
Meanwhile, please access the share folder via \\server’s IP address\share folder. Then please check if this issue still persists.
In addition, there is a similar thread. Please refer to and check if can help you.
Can't
access UNC share on Windows Server 2012 R2
Hope this helps.
Best regards,
Justin Gu

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

I have transferred my itunes library to an external drive. I then attached the external disk to a new computer. I can now access all songs from the new computer. But I can't access playlists. I can still access all songs and playlists on the old computer

If you right mouse and select Get info it will show you the Apple ID used to purchase these songs.
Usually the name of an apple id is based on the email. So knowing that you may have forgotten the Apple ID password.
You can request a new password here http://www.apple.com/support/appleid/

So I had a mac with an account on it, I no longer have that laptop. Can I access my library from a different computer? If so, how?

So I had a mac with an account on it, I no longer have that laptop. Can I access my library from a different computer? If so, how?

No

How to access ZFS share from Windows 7?

I am new to UNIX and am having a hard time to get a ZFS share to access from windows 7 on my home network.
I was able to access both WHS 2011 and QNAP 459 share on SE 11 by using the file manager - Server - windows & then just using the IP address, username, password. That was easy or at least similar to what I was used with windows 7.
However, I have yet to be able to access a ZFS pool containing a share that I can access from another windows 7 machine at home.
Apparently, I can mount the share from windows but the login name/password do not get accepted when I add a network connection in windows. Windows does seem to find the path \\solaris\tank_share1 and even mounts it, but the login for SE 11 does not work for some reason.
I changes the workgroup name to WORKGROUP in windows but that did not change anything. I tried to edit the pam.conf file by changing the ownership from root to myself so I could use gedit since it has been 15 years since I last used vi. However, that corrupted the setup as I got "system error" message on reboot that never got out of that infinite loop.
I am basically using the instruction through the following link:
http://blogs.oracle.com/observatory/entry/accessing_opensolaris_shares_from_windows
Any help to get this problem resolved is much appreciated
Thanks,
Kurt

The documented procedure of having to edit the pam_conf file seems to work followed by resetting one's password seems to work after all. I believe, by taking away ownership from root to "admin user" screwed things up. I had to relearn how to use vi but that didn't take very long.
Got about 50 MB/s speed coping from Windows SSD to SE11 SSD via very small (5 GB) RAIDZ array in VMWare (running on top of WIN 7-64). I have to try native SE11 SSD next as the VMWare setup is just for practice.
Q: Is there a way to launch gedit from the terminal window in root mode so I wouldn't have to use vi?
Kurt

Can't find network printer from Windows XP and Bonjour

Does anyone else have a problem printing to network printers from Windows XP machines? I have Bonjour for windows installed and had been printing fine from my Windows XP machines, but lately the XP machines can't seem to find the printers. They work fine from all the Macs (Tiger 10.4.11 and Leopard 10.5.4). I'm wondering if some recent Windows XP patch broke the network printers or the way the printing system deals with ports that reference hostname.local or how hostname.local works on Window XP. I suppose it could have been a Norton Internet Security update too.
It seems like the XP machines can no longer find printers when they use printerhostname.local for their printer port name
Bonjour can see the printers when it initially starts up an looks for printers. Bonjour even sets up the printer port as:
PrinterName.local using port 9101 /* for an Airport Extreme attached printer */
The only way I can get the printers to print is to create another port with the actual IP address like:
192.168.1.123 using port 9101
which kind of defeats the purpose of the PrinterName.local naming convention.
This doesn't just happen on Airport Extreme attached printers. It also happens on any printer's host name that is qualified with a .local tag.
The weird thing is that I can ping the printer using the printer.local hostname.
I'm stumped. Any clues?

I am also unable to access my printer through Bonjour after updating XP to Service Pack 3.

Random error accessing CIFS shares from Windows

I am setting up some CIFS shares to be used from Windows clients and in the process I had some random problems accessing the shares.
In hope of finding the answer I checked the CIFS Service and the Active Directory Service, and while watching the screen for Active Directory Service I saw that the "Selected Domain Controller" changed from one to another. I now stayed within this screen and noticed that the "Selected Domain Controller" continued to change and then I found the problem, because an unknown Domain Controller appeared. The IP was 216.150.17.8
I found that when ever this Domain Controller was the selected one, all access to CIFS shares from Windows clients failed! This is correct, because the 216.150.17.8 of course is unaware of all users in Our Domain
So the Questions are:
- what is happening?
- and how to solve this?
- why is a Domain Controller 216.150.17.8 sometimes the Selected Controller?
- where does this 216.150.17.8 come from?
Have You seen anything like this?

I now have found out why the DC changes - it is because the CIFS service is restarting ;-(
This is a log snip
2009-5-14 09:24:53 Executing start method ("exec /usr/lib/smbsrv/smbd start").
2009-5-14 09:24:53 Executing stop method (:kill).
2009-5-14 09:24:53 Stopping because all processes in service exited.
2009-5-14 09:24:39 Method "start" exited with status 0.
2009-5-14 09:23:48 Executing start method ("exec /usr/lib/smbsrv/smbd start").
smbd: NetBIOS services started
2009-5-14 09:23:48 Executing stop method (:kill).
2009-5-14 09:23:48 Stopping because all processes in service exited.
2009-5-14 09:23:34 Method "start" exited with status 0.
It seems to happen when I access the share and thereby force a uservalidation
Any ideas?

Cannot access CIFS shares from Windows 2008R2 on NSS3000

Hi,
I am trying to upgrade our 2008 domain to 2008R2 but with that last version we cannot access to cifs shares on the NSS3000. Access from all other clients are OK. It was 100% OK under 2008...
Whether I use the IP or the FQDN, I got an error from Windows 2008R2. From IP, I got "No process is on the other end of pipe." and from network Gui, I got "Windows cannot access \\nas0026CB647BC6. Check the spelling of the name...blabla. Details : Error Code : 0x80070035, The network path was not found".
On the NAS, I got this errors in the cifs logs :
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:48 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:48, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
It is likely to be an incompatibility between Windows 2008R2 smbv2 and the NSS3000 smbd but I can't find any firmware update and I can't find the process to allow in the registry.
I can ping it, I can connect on the web interface, I can connect on FTP but no CIFS at all.
Firmware version running is 1.20.1. Hardware rev : V03.
Any idea?

Hi SpaceBass, have you looked into sharepoints or into Netinfo manager. I have been playing around with sharepoints and it does let me enter non local users into the sharing prefs- albeit manually. Only thing is , depending on the number of macs you have, it could be a long and tedious job entering it all by hand. Netinfo may have an easier way, I'll do some more digging and post back.
Cheers.

SQL server can't access network share

Hello,
I am facing an issue where the SQL server can't access the network share. The network share is mounted by a domain user who is also configured as Administrator on the server.
Through SQL Server management studio as well as PoweShell script when i try to access the share in order to attach the database contained within the share, i get the error "Unable to find the file specified". I can't mention the network drive to
the SQL management GUI file browser too if i try to attach the database through GUI.
For all SQL services, I changed the service log on account to be the same account which mounts the network share.
As work around -
I launched a command prompt under NT Authority \ SYSTEM (LocalSystem) account and mounted the drive to the same location which lead to adding one more connection but under local system account. With this change, the SQL server was able to access the network
share!
I couldn't understand whey SQL expects the network share to be mounted under local system account even if all the SQL services are running under domain account ? I want SQL to be able to access the network share without opting for above work around.

Hello,
I couldn't understand whey SQL expects the network share to be mounted under local system account even if all the SQL services are running under domain account ? I want SQL to be able to access the network share without opting for above work around.
It doesn't have to be. The workaround is only a temporary fix and is certainly not a good idea. I would not use mounted folders with SQL Server, at all, period.
The reason you're having difficulty is that when the folder is mounted, it's mounted for YOUR session not ALL sessions. SQL Server has already started its services and is running under its' own session and is not privy to the things you do to change the
environment. For example, if you changed a system or user variable (for example, a SET variable) SQL Server would have no idea about this because when it started, that variable either didn't exist or was something else. This is not SQL Server's fault but how
Windows works (this information is stored in the Process Environment Block [PEB]) for any windows process.
As other's have said, don't use mounted drives - use a UNC path. UNC paths are 100% supported on 2012+ as well as running databases on a SMB 3.x share (UNC pathed of course).
If you absolutely must use a mounted drive, enabled xp_cmdshell access (through sp_configure) and run the net use command through xp_cmdshell. I, once again, would highly advise not doing this and using an UNC path.
-Sean
The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

Cannot access SMB shares from Windows boxes in AD domain

Hey folks
I've needed to tackel this for sometime, but Santa is bringing me a dual core G5 and the urgency just increased.
I have an Active Directory domain and all of my macs are successfully joined and get Kerberos tickets upon login. I can access any shares I need from OS X -> windows but NOT the other way around.
I did finally noticed that only local user accounts seem to appear in the accounts list in the sharing pref pane. So I have figured out that I can access any users folder with that one account- OUCH! What I need is access control based on the user.
For instance if I want to share ~jdoe and jdoe is a mobile account and an AD user then if I am logged into windows as [email protected] then I should be able to access the share on the mac. Conversly I should not be able to access ~jdoe with the mac's local admin account and pass.
Do I need to change my smb.conf to reflect AD and if so, where/what?
Also, do I need to map UIDs to anything? And, is that a security risk?
Thanks!
-N

Hi SpaceBass, have you looked into sharepoints or into Netinfo manager. I have been playing around with sharepoints and it does let me enter non local users into the sharing prefs- albeit manually. Only thing is , depending on the number of macs you have, it could be a long and tedious job entering it all by hand. Netinfo may have an easier way, I'll do some more digging and post back.
Cheers.

Can't access several sites from Windows XP. What should I do?

Can't access Wikipedia and other sites. Mostly when I click on links from facebook and twitter. And can't access wiki at all. Tried restarting the pc, uninstalling and reinstalling, resetting firefox. Nothing works.

Hi ifaz29,
It looks like the troubleshooting information provided was from the device you reported the issue. Can you please copy the troubleshooting information on the about:support page of the affected installation. This will tell if there are any add ons that might be affecting your browsing. However to skip this step you may also be able to try to start Firefox in Safe Mode to make sure that it is not an add on affecting what sites are displayed. [[Troubleshoot Firefox issues using Safe Mode]]
In order to make sure that it is not the cache you can bypass the cache when you reload the page with these instructions: Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

How can i access my account from someone elses computer

My computer has crashed and I think someone has accessed my itunes account. How can I access it from someone elses computer so that I can see my transactions and so I can change billing information?

Hello c00lrev,
This can be done by signing into the iTunes Store in iTunes on another computer, as detailed below.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Cheers,
Allen

Treo 750 can't access programs list from start or windows button

Hi first time question. I have treo 750 and just recently can't access any programs from windows or start button. Can't even access memory to delete unnecessary files. What to do?
thanks Mike
Post relates to: Treo 750 (AT&T)

Is this a memory problem you are running into? Have you tried a soft reset?
Post relates to: Palm Z22

Network Media Player (Noontec V9-T) unable to access network shares on WIN8 Pro

I have just upgraded from Windows 7 home premium 64 bit to Windows 8 Pro 64 bit. After the upgrade, I made sure my video library was shared (both with the homegroup and my username) and that network discovery was enabled file sharing enabled etc etc.
On the Noontec Media centre I can see the workgoup called WORKGROUP. When I click on it I can see the name of my PC. But when I click on the pc name to log in to access the shares within it comes up with a username/pass box comes up. I then put in my username/pass
on the windows 8 pro machine, to which the Noontec receives an error message stating cannot login.
Previously I had enabled sharing with everyone (read only) on windows 7 home and this username/pass dialog box never appeared. Just said successful logon. So i tried sharing video library with "everyone" in windows 8 pro, the unit still can't log on.
I believe this noontec uses Samba. The last updated samba file was named "samba_3.0.23c_mipsel.ipk" when I updated the media players samba about 9 months-a year ago. i have checked the manufacturers website, there has been no further updates released.
Is there a way for me to access network shares from this media centre by maybe installing a new samba server on the windows 8 machine that is compatible with older samba clients? I am not savy with samba clients/servers at all, I just loved the way XP network
shares always seemed to work across multiple platforms... and win7/8 doesn't. Help anyone?

A lot of these media players will not work correctly. If your Video files are stored as .avi, MKV, MP4 etc.. pretty much anything excpet for .ISO, the best way is to use Plex media server on the windows 8 PC. It's free and should allow you to organise files
and libraries as you want.In fact, it's my preferred access method now, as most, smart TVs also support plex and support it well....allowing me to play the files directly in my smart TV, without using the Media players.
In addition if you have an Android tablet or phone, you can (if you want) access your media files from Plex using Media Monkey (free) and simply play them direct to the TV, Media Monkey simply hands the data stream over to the smart TV.
I have a similar set of media players and exactly the same problem with windows 8,8.1, previous shares on versions 7, vist etc..work perfectly. I use a free application on my android phone to remote start my media server/s (via the network card).
Shutter Light - Free monitoring activity and network data, to prevent unwanted sleep during Videos and to ensure the PC goes into sleep mode (disabling windows power management)
Plex simplifies everything and acts as a great central server for all types of devices and can bring media files together from different Directories/Disks, in to one set of Libraries.

Window 8.1 system unable to access network shares via VPN connection

Is there something inherent to Windows 8.1 that prevents it from accessing shares on a domain?
I know that it cannot join a domain, but does that also mean that it cannot access shares which are on a domain?
My problem is that I have several user that are running windows 8.1 that are connecting to our network via a VPN.
The users have domain accounts but their computers as windows 8.1 cannot joined to the domain.
So to access network shares they have to use their domain credentials to create a VPN connection.
Once connected the user can RDP to systems on the domain using their domain accounts, so I know that their user names/passwords and permissions are correct. They can access these systems using the computer name, so I don't feel that I have a DNS issue.
They can see the shares on our file server, but when they try to access their departments shared file, they receive an access denied message. There are a few shares that are completely wide open, shared to all users and all departments but they cannot access
those shares either.
You can ping the file server, from the the client when they are connected to the VPN but you just cannot access any of the shares.
So...
I am thinking that it has something to do with windows 8.1 and not being able to join a domain, but I cannot find anything to explicitly support this thought.
Other users running a variety different OS (windows 7, OSX, Linux) can all access the shares without any problems via the VPN, so I am a little stumped.

I have done some more testing and oddly enough I can map a drive if I use the IPaddress, but not the computer name, when checking the check box "connect using different credentials"and providing they users domain credentials.
This seems to point to a DNS issue, one would think, but I can hit the file share server by name \\fileserver.dev.lan
I can see all the shares, so dns seems to be fine right?
So I don't understand why I can map a drive using do the IPaddress and not the machine name, but yet I can see and ping the server by name?
When I try to create a mapped drive by machine name I receive the following message:
Windows cannot access \\fileserver.dev.lan\all
You do not have permissions to access \\fileserver.dev.lan. contact your network administrator to request access.
But if I use the \\x.x.x.x\all using the very same user and password I get connected with no problem.
This only seems to happen on windows 8.1, which leads me to think that has something to do with OS.
I am thinking about upgrading to windows 8.1 pro, but I don't want to go though the hassle and expanse is the OS is not the problem.

Can't access Network share from Windows 8 computer

Similar Messages

Maybe you are looking for