Can't add additional users, vm v5.4

I was able to add an additional admin but cannot get the server to accept any additional users. I can fill out the new user info and hit save but never registers that the request is sent. Is there an issue with adding users that I have over looked?

Hi Micheal,
Can you maybe add a few screenshots to show how exactly this fails?
Have you tried different clients/browsers to perform the operation?
Are you logged in as "superuser" when trying to add the new users?
I assume you are using the DMM embedded authentication mode, correct?
Best Regards,
Marco

Similar Messages

Can we add additional fields in work center creation using any user exit ?

Hi,
is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
regards,
madhu kiran

hi,
requirement is can i get the additional fields like equipment and asset in the work center creation ?
i would like to maintain these against a work center
and using any user exit can i add additional fields ?
regards,
madhu kiran

Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

Team,
We are using SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help. The MDS installed and configured on SAME Machine (MyServer).
I have two issues here.
1. MDM website can not Identify the local Users (MyServer\MyUser).
The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
2. Can not add new user in Existing working MDM.
I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

Now I Solved this problem in my case.
I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
Hope, it will help

How can we add additional fields to the BP Search RESULT screen?

Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!

Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

How can I add new user in sharepoint list column (people or group) or in sharepoint group using loginName only

Hi
If I have only login name of any user like - "Donamin\login_name".
If this user is not present in sharepoint portal.
How can I add this user to people or group column of any list or in any sharepoint group with permission?

hi
got the issue
it should be like this -
string userloginname = @"DOMAIN001\vyankatesh_mujumdar"
using (SPSite oSpSite = new SPSite(site.ID))
using (SPWeb web = site.OpenWeb())
try
{ SPList lst = web.Lists["TestList"];
string userloginname = @"DOMAIN001\vyankatesh_mujumdar";
web.EnsureUser(userloginname);
SPUser oSPUser = web.SiteUsers[userloginname];
SPFieldUserValue FieldValueName = new SPFieldUserValue(web, oSPUser.ID, oSPUser.LoginName);
SPListItem oSPListItem = lst.Items.Add();
oSPListItem["Title"] = userloginname;
oSPListItem["People"] = FieldValueName;
oSPListItem.Update();
catch (Exception ex)
ExceptionManager.LogErrorInFile("--------Exception -------", bIsLogEnabled);
ExceptionManager.LogErrorInFile(ex.Message, bIsLogEnabled);
ExceptionManager.LogErrorInFile(ex.Source, bIsLogEnabled);
ExceptionManager.LogErrorInFile(ex.StackTrace, bIsLogEnabled);
ExceptionManager.LogErrorInFile("-------------------------------------------------------", bIsLogEnabled);
Thanks for all for the reply

Can I Add the User Defined Unit system?

Can I add the User Defined Unit, Just like mm, inch..?
My Clients are Korean.
So. They want to use the Korean traditional Unit system which Not defined in Indesign.
Pls Help me.

Impliment IUnitOfMeasure with custom units.

Can not add Domain User to Local Admin Group Win8.1

Hello,
I am trying to add a domain user to the local admin account on a Win8.1 Enterprise computer. When I click the check name button it asks me to enter network credentials even though I am signed in to the computer with a domain admin account. When I try to
type in any of my domain admin accounts it says "The Username or Password is incorrect". Even though I used that same account to login with. I can successfully ping all 3 of my DCs from the computer and have tried putting my second DC as the primary
DNS and my third DC as the primary DC and same problem. I have checked for Active Directory errors on the DC and everything says it is running fine on the DC in server manager. I have this problem on multiple computers. Some of the computers it will work on
but 90% of them it won't allow me to add the local user to the local admin group.
DCs are running Win Server 2008 R2 Enterprise.
Any help would be greatly appreciated.
Thank You

I would suggest you to use Restricted Group(via GPO) to add domain users/group to a local admins group
1)Create a new group in Active Driectory
Create a new group in Active Driectory that you wish to add to every workstations local administrator group. DO NOT add any users to this group at this time.
2.
Create a new GPO
Create a new group policy object and link it to the desired OU. Make sure that the GPO you are using covers the OU that the WORKSTATIONS you are wanting to give users local administrative rights over.
3.
Edit the newly created GPO
Navigate within the newly created GPO to Computer Configuration -> Policies -> Windows Settings -> Security Settings --> Restricted Groups
4.
Add your new Active Directory group to the Restricted Group
Right-click the Restricted Groups folder and select "Add Group" to add your new Active Directory group to the Restricted Group. In the Group field, type the name of the newly created Active Directory group and click "OK"
5.
Add the Restricted Group to the local administrator group
In the Restricted Group Properties windows click "Add" under the section titled "This group is a member of:" Type "Administrators" (without the quotes and yes it is plural), in the Group Membership window and click "OK"
6.
Wait for GPO updates to apply to the workstations
Once your users receive their updated group policy settings every workstation within the OU you specified will have your new Active Directory group as a member of the local administrators group. If you need to force the GPO update on a specific workstation,
run "gpupdate /force" in a command window on that workstation.
7.
Add a user or group of users to the Active Directory Restricted Group
When you are ready, or in a position where you need to provide local workstation admin rights you can simply add the users or group of users to the Active Directory group that you created for use with Restricted Groups within your Active Directory Management
Console.

HT3965 Can you add multiple user profile to the iPad

Can you add multiple user profile to the iPad

Hi Friend,
Apple devices are developed for single users.
Hope it helps

How can i add addtional user defiend fields in infoset

Hi,
Can any one tell me how can i add addtional user defiend fields in infoset and make it availible in output screen.
Also please tell me to create parameters through abap quary sq02 , as by default it creates select-option.
With Thanks n Regards,
Ranu

Hi,
As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
Regards
Nitesh

Can we add additional hard disk for 64gb macbook air, since only 3gb is available as space.

can we add additional hard disk for 64gb macbook air ? since only 3gb is available as space. Is their any other way. Kindly suggest.

Try http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Air_2012
Allan

Cannot Add Additional Users

Even though I'm the primary account holder when I select additional users I cane fit or remove but there is no Add option. when I try to on on with my partners details it states there is a problem with her account so we are unable to log in to check. Her mail a Aldo affected?

Princeofthenight wrote:
Even though I'm the primary account holder when I select additional users I cane fit or remove but there is no Add option.
This has been reported to the Sky bods for investigation.

How can I add a user Role member that is from a different domain

We are currently building out SCOM 2012 R2 to provide monitoring as a service to some of our customers. As of now we have the RMS on our own department's domain (Domain A) which we have full control of and we have a gateway server that is on the company
wide domain (Domain B) so that we can monitor other departments devices as the leverage this system.
Monitoring is working just fine on both domains and we are just working on fine tuning SCOM so that we can roll it out as a service we offer to our customers. One of the next steps we are working on before rolling it out is giving specific users access
to view only their own devices, dashboards, and groups. So I created a Read-Only profile and went to add a user to test it out, but that user is on Domain B and SCOM is unable to resolve this account. I'm seeing Event ID 26319 with Error Code 1332.
How can I get SCOM to discover devices on a different domain so that I can give them different permissions for accessing the Operations Console and/or Web Console? Is this possible?
Here is the Error I'm seeing.
Log Name: Operations Manager
Source: OpsMgr SDK Service
Date: 2/4/2015 1:11:59 PM
Event ID: 26319
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: xxxxx.xxxx.xxxxxxxx.xxx
Description:
An exception was thrown while processing UpsertUserRolesV2 for session ID uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40.
Exception message: The creator of this fault did not specify a Reason.
Full Exception: System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="OpsMgr SDK Service" />
<EventID Qualifiers="49152">26319</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-04T21:11:59.000000000Z" />
<EventRecordID>172748</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>xxxxx.xxxx.xxxxxxxx.xxx</Computer>
<Security />
</System>
<EventData>
<Data>UpsertUserRolesV2</Data>
<Data>uuid:f3b4015e-9583-4237-b7a6-406826434553;id=40</Data>
<Data>The creator of this fault did not specify a Reason.</Data>
<Data>System.ServiceModel.FaultException`1[Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException]: The creator of this fault did not specify a Reason. (Fault Detail is equal to Microsoft.EnterpriseManagement.Common.UserRoleUserUnresolvedException:
Unable to resolve the user [email protected] associated with the user role. Error code 1332. Check your active directory configuration.).</Data>
</EventData>
</Event>
Thanks for any help I can get in resolving this issue.
Jake

The SCOM Management Server is in Domain A. I've tried it already and it has failed.
So just to clarify the method I used was to go to Administration>Security>User Roles. Then New User Role>Read-Only Operator. In the Create User Role Wizard I then gave the User Role a name, Clicked "Add" under User Role Members.
Then the Select Users or Groups window pops up and I changed the Locations from Domain A to Domain B and searched for the user, which it's able to find, then clicked "OK" to add it to the User Role members which it does just fine. On
the next page which is Group Scope I checked the one group I want this account to have access to and then click next. This brings me to Dashboards and Views where I click the radio button for "Only the dashboards and views selected in each tab are
approved" and chose the folder of dashboards I want this account to access and then click next. This brings me to the Summary and I click "Create". At this point it thinks for a moment then closes out the wizard but the new Read-Only
Operator does not appear. I then look in Event Viewer and see the Event I pasted above.
Am I doing something wrong here? Any guidance on how to get around this issue would be much appreciated.
Thanks,
Jake

How can I add another user to my iCloud account?

I have sandirod1@**** and want to know if and how to add another user from my household linked to the same account
<Edited By Host>

Firstly, it's a bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.
If you give the other user your ID and password he will have full access to everything in your account just as if he was you, and his contacts and calendars will sync if enabled, and he will have full access to your email. (He will of course need Lion 10.7.2 or above, or iOS5, to use the syncing facilities). He can also access the iCloud website and read, move or delete emails, and alter settings.

How can I add a User to the transport workflow

Hi all,
I want to add one user to the transport workflow in BW Dev system? How can I do it, PLEASE.
Thanks.

Hi,
Check this if you can reset the workflow if the configuration of old user get damaged instead of creating a new one.
http://help.sap.com/saphelp_erp2005/helpdata/en/06/1c3737f0e64142e10000009b38f839/frameset.htm
Please reward if it helps.

How can I add a User Library or Instrument Library to my Project Installer?

Hello All,
I want to includ some libraries for 2014 in my distribution installer in LabVIEW 2014.
Some of these files are located in Instr.lib and others in User.lib. There may also be some in vi.lib.
I have some devices and custom VI's I have written and would like to distribute these with my executable.
Is there a way to include these libraries automatically?
As it stands now, I have to install my application then manually copy these libraries which is obtuse.
Note that one of my user libraries is a directory of VI's, not a compiled libary (at this time).
Thanks for any advice.
Veni Vidi Duci

DB_IQ wrote:
Yeah, I believe so.
In the past, though, none of these libraries were installed.
But this is why:
My main VI is the test VI that calls sub vi's from a remote location by reference. These VI's are dynamic in scope.
As such, any of these sub VI's that refer to the libraries in my User.lib for example have no VI to reference. These dynamic VI's do not get installed. They are simply present in a library.
Would it make sense, then, that my VI's that are called by reference should themeselves be installed using an executible so the required instrumetns and user VI's are installed as well?
That might do the trick.
You can manually add them as dependencies to a seperate folder in the exe build spec, and then reference that relative location in your main VI when calling them.
There is always the Post-Build action too that might help.

Can't add additional users, vm v5.4

Similar Messages

Maybe you are looking for