Can't change autoplay to false

I just have a little movie clip I want to put on a web page.
When I select the FLVPlayback component and change the autoplay to
false, it doesn't stick. The next time I check it, it's back to the
autoplay default. Saving the file with the false option selected
has no effect.

Try creating a new flash document (I'm guessing you imported
the video into flash for progressive playback - which provides
skins). Once you've imported the video and see the flvplayback on
the stage, give it an instance name mentioned below, add a layer on
the time line above this video, apply myFLV.autoPlay = false; -
export ONLY as swf for now - does it work? Some times a document
can get corrupt and cause headaches. See if that is the case here.
If the swf file plays as it should, you know it's probably
something corrupt in your other document. It's usually easier to
control components through AS instead of their component inspector
(for me), plus AS will over-ride the component inspector.

Similar Messages

  • Can we change only part of application action not set bubbleEvent = false?

    Our outgoing/incoming checks have a due date which have to be exchanged later, ex: 30 days later.
    In SBO, the payment goes into bank account immediately which we need to change.
    Test Cases :
    Case 1 : After the “ok” button on the Outgoing payments Form, there will be a Credit bank deposit which we want it later.
    We want it to be changed to Notes Payable. And to have the bank deposit after the due date.
    Question : We might change the G/L Acc right after the ok button. It seems that we can’t change the journal after it inserted.
    Case 2: We set the OK Button’s bubbleEvent = False, and do everything by our self
    Question :
    (1)     How do we get the data on the matrix of the Payment Means Form while it didn’t save to VMP1 yet?
    Is it in other temp table?
    (2)     How do we get the multi-selection on the matrix of the Outgoing payments form?
    (3)     Can we still use the original action of inserting OVPM/VMP1 only replace journal entries action?

    Hi Nerow,
    First you have to be sure if this case can not be handled by the standard functionality. In the Definition of Banking under "Define Payments" you can define the payment terms, and there you can always set the date to 30 days after.
    Case1.
    Refer to this thread how to get the data before it's saved. accessing batch numbers
    Case2.
    You can always access a Form, then the Matrix Object and then the datasources of the matrix. This is exactly the purpose of datasources, to handle the data that is in the GUI before it's saved to the DB.
    HTH,
    Felipe

  • How can I change my JApplet into a JApplication?

    I am working with a JApplet and am finding that some of my code only works in applications.
    So being new to this, I am clueless as to how to change my Applet into an Application. I understand the difference in definition between the two, but when it comes to looking at Applet Code and Application Code, I am not able to see a difference. (Other than an Applet stating "Applet")
    So, that being said how can I change my code so that it runs as an application and not an applet? Here is my current layout code
    import java.applet.Applet;
    import java.awt.*;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.*;
    import java.text.NumberFormat;
    import java.text.DecimalFormat;
    // Creating the main class
    public class test extends JApplet implements ActionListener
         // Defining of format information
         JLabel heading = new JLabel("McBride Financial Services Mortgage Calculator");
         Font newFontOne = new Font("TimesRoman", Font.BOLD, 20);
         Font newFontTwo = new Font("TimesRoman", Font.ITALIC, 16);
         Font newFontThree = new Font("TimesRoman", Font.BOLD, 16);
         Font newFontFour = new Font("TimesRoman", Font.BOLD, 14);
         JButton calculate = new JButton("Calculate");
         JButton exitButton = new JButton("Quit");
         JButton clearButton = new JButton("Clear");
         JLabel instructions = new JLabel("Please Enter the Principal Amount Below");
         JLabel instructions2 = new JLabel("and Select a Loan Type from the Menu");
         // Declaration of variables
         private double principalAmount;
         private JLabel principalLabel = new JLabel("Principal Amount");
         private NumberFormat principalFormat;
         private JTextField enterPrincipal = new JTextField(10);
         private double finalPayment;
         private JLabel monthlyPaymentLabel = new JLabel("  Monthly Payment    \t         Interest Paid    \t \t            Loan Balance");
         private NumberFormat finalPaymentFormat;
         private JTextField displayMonthlyPayment = new JTextField(10);
         private JTextField displayInterestPaid = new JTextField(10);
         private JTextField displayBalance = new JTextField(10);
         // Creation of the String of arrays for the ComboBox
         String [] list = {"7 Years @ 5.35%", "15 Years @ 5.50%", "30 Years @ 5.75%"};
         JComboBox selections = new JComboBox(list);
         // Creation of the textArea that will display the output
         private TextArea txtArea = new TextArea(5, 10);
         StringBuffer buff = null;
         // Initializing the interface
         public void init()
              // Creation of the panel design and fonts
              JPanel upper = new JPanel(new BorderLayout());
              JPanel middle = new JPanel(new BorderLayout());
              JPanel lower = new JPanel(new BorderLayout());
              JPanel areaOne = new JPanel(new BorderLayout());
              JPanel areaTwo = new JPanel(new BorderLayout());
              JPanel areaThree = new JPanel(new BorderLayout());
              JPanel areaFour = new JPanel(new BorderLayout());
              JPanel areaFive = new JPanel(new BorderLayout());
              JPanel areaSix = new JPanel(new BorderLayout());
              Container con = getContentPane();
              getContentPane().add(upper, BorderLayout.NORTH);
              getContentPane().add(middle, BorderLayout.CENTER);
              getContentPane().add(lower, BorderLayout.SOUTH);
              upper.add(areaOne, BorderLayout.NORTH);
              middle.add(areaTwo, BorderLayout.NORTH);
              middle.add(areaThree, BorderLayout.CENTER);
              middle.add(areaFour, BorderLayout.SOUTH);
              lower.add(areaFive, BorderLayout.NORTH);
              lower.add(areaSix, BorderLayout.SOUTH);
              heading.setFont(newFontOne);
              instructions.setFont(newFontTwo);
              instructions2.setFont(newFontTwo);
              principalLabel.setFont(newFontThree);
              monthlyPaymentLabel.setFont(newFontFour);
              displayInterestPaid.setFont(newFontFour);
              displayBalance.setFont(newFontFour);
              areaOne.add(heading, BorderLayout.NORTH);
              areaOne.add(instructions, BorderLayout.CENTER);
              areaOne.add(instructions2, BorderLayout.SOUTH);
              areaTwo.add(principalLabel, BorderLayout.WEST);
              areaTwo.add(enterPrincipal, BorderLayout.EAST);
              areaThree.add(selections, BorderLayout.NORTH);
              areaFour.add(calculate, BorderLayout.CENTER);
              areaFour.add(exitButton, BorderLayout.EAST);
              areaFour.add(clearButton, BorderLayout.WEST);
              areaFive.add(monthlyPaymentLabel, BorderLayout.CENTER);
              areaSix.add(txtArea, BorderLayout.CENTER);
              // Using the ActionListener to determine when each button is clicked
              calculate.addActionListener(this);
              exitButton.addActionListener(this);
              clearButton.addActionListener(this);
              enterPrincipal.requestFocus();
              selections.addActionListener(this);
         }

    baftos wrote:
    Here is one of the sites that explains the procedure:
    [http://leepoint.net/notes-java/deployment/applications_and_applets/70applets.html].
    But maybe you should try to fix the code that does not work as applet?
    Which one is it?
    >Here is one of the sites that explains the procedure:
    [http://leepoint.net/notes-java/deployment/applications_and_applets/70applets.html].
    But maybe you should try to fix the code that does not work as applet?
    Which one is it?
    The code that doesn't work in my applet is the exit button code
    else if (source == exitButton)
                        System.exit(1);
                   }I also can't get my program to properly validate input. When invalid input is entered and the user presses calculate, an error window should pop up. Unfortunately it isn't. I compile and run my applications/applets through TextPad. So when I try to test the error window by entering in invalid info, the applet itself shows nothing but the command prompt window pops up and lists errors from Java. Anyhow, here is the method I was told to use to fix it.
    private static boolean validate(JTextField in)
              String inText = in.getText();
              char[] charInput = inText.toCharArray();
              for(int i = 0; i < charInput.length; i++)
                   int asciiVal = (int)charInput;
              if((asciiVal >= 48 && asciiVal <= 57) || asciiVal == 46)
              else
                   JOptionPane.showMessageDialog(null, "Invalid Character, Please Use Numeric Values Only");
                   return false;
                   return true;
         }My Instructor told me to try the following, but I still can't get it to work.String content = textField.getText();
    if (content.length() != 0) {       
    try {          Integer.parseInt(content);  
    } catch (NumberFormatException nfe) {}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

    When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
    I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
    Anything I haven't tried?
    HELP!

    A bit confused by your statement
    bcboarder wrote:
    . I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
    Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
    I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
    A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
    You can try to borrow and  use the Mac Disk Utility ->First Aid ->Repair.
    Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

  • Can you change the value of a variable that is reset by a parameter?

    Sorry if this is simple but I just crashed a package and can't do an autopsy. I suspect I sent it into an infinite loop. I know you can't change the value of any passed in parameters. What I tried to do was have the parameter set the value of a variable
    and then I tried to change the value of the variable. Is that even allowed?
    I was trying to do this:
    MyCheckVariable = MyParameter (which equals true)
    (some cool stuff happens)
    MyCheckVariable = False
    I hit F5 and my package turned into the Energizer Bunny. Is the way I try to reset the variable the culprit?

    This is a prototype so I just created a project parameter and set it to true. In the real world the parameter will be used to control an optional part of the process because on a re-run after error that part doesn't have to be ran again.
    So when I say MyCheckVariable = MyParameter (which equals true) in reality what I actually have is in the variables window I'm using an expression and it looks like this in the variables window
    name = runDownload
    Scope = Package
    Data Type = Boolean
    Value = True (but greyed out)
    Expression = @[$Project::param_runDownload]

  • Can we change font size and font type in reports

    Hi All Technical/Functional Masters,
    We are developing some transactional reports in ISU. this report has 20 columns to be printed. On screen, display is not a problem but client has a requirement to download this report in PDF format and wants to print on A4-paper in Landscape. Although we have managed to accommodate all the columns on A4 paper but have to compromise with font size that are very small and not visible. If we download the report in excel format we are able to maintain the font size 8 and accommodate all columns after little format but same in PDF is a problem.
    Can anyone tell whether we can increase the font size and change font type(from SAP standard to 'Arial') before sending the output in PDF ? Is there any property or utility that can be changed or used for this purpose.

    Function Module : CONVERT_ABAPSPOOLJOB_2_PDF
    Include : THSTXWFPL
      for modify font size
    decrease fontsze foncharacter will increase
    fontsize = 120.     <-- Change
    fontsize = 100.  or fontsize = 80
    Depend on your logon lang. My case logon 'TH' or 2.  I modified font ZCORDIA (refer CordiaNEW thai font)
    if is_cascading is initial.
      case language.
      when '0'. "Serbian
        font = 'COURCYR'.  devtype = 'SAPWIN'.
      when '1'. "simpl.Chinese
        font = 'CNHEI'.    devtype = 'CNSAPWIN'. cjklang = 'X'.
      when '2'. "Thai
      font = 'THDRAFT'.  devtype = 'THPDF'.
       font = 'ZCORDIA'.  devtype = 'ZMTHSWNU'.
        font = 'THANGSAN'.  devtype = 'ZPDFUC'.
      when '3'. "Korean
        font = 'KPSAMMUL'. devtype = 'KPSAPWIN'. cjklang = 'X'.
      when '4'. "Romanian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '5'. "Slovenian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '6'. "Croatian
        font = 'COURIER'.  devtype = 'I2SWIN'.
      when '8'. "Ukranian
        font = 'COURCYR'.  devtype = 'SAPWIN'.
    Add font Cordia Thai
    SE73 --> Fon familia --> ZCORDIA
    Load Font Cordia thai to system
    SE38 --> RSTXPDF2UC
    load CORDIA.TTF
    SE73 --> printer font --> 'ZMTHSWNU'
    Add ZCORDIA font and copy AFM Metric from = 'THDRAFT'.  devtype = 'THPDF'.
    Modify AFM
    example
    *----- OLD--
    StartFontMetrics 2.0
    sapFamily ZCORDIA
    sapHeight 000
    sapBold false
    sapItalic false
    StartCharMetrics 0183
    WX 0500 ; N space                          ;
    WX 0500 ; N exclam                         ;
    WX 0500 ; N quotedbl                       ;
    WX 0500 ; N numbersign                     ;
    WX 0500 ; N dollar                         ;
    WX 0500 ; N percent                        ;
    WX 0500 ; N ampersand                      ;
    *--NEW--
    StartFontMetrics 2.0
    sapFamily ZCORDIA
    sapHeight 000
    sapBold false
    sapItalic false
    StartCharMetrics 0183
    WX 0375 ; N space                          ;
    WX 0375 ; N exclam                         ;
    WX 0375 ; N quotedbl                       ;
    WX 0375 ; N numbersign                     ;
    WX 0375 ; N dollar                         ;
    WX 0375 ; N percent                        ;
    WX 0375 ; N ampersand                      ;
    Result : decrease space between character.   Then Your PDF will have BIGGER FONT.
    Rdgs,
    Suwatchai

  • How can i change the position and size of the applet

    dear fellows,
    how can i change the position and size of the applet in which form is running over the web.
    thanx
    Mochoo

    Yes, you can add the following line to your formsweb.cfg section :
    HTMLbodyAttrs=onLoad='javascript:self.moveTo(100,100)'
    if you are in SEPERATEFRAME = FALSE
    Or Set_Window_Property( FORMS_MDI_WINDOW, POSITION, X, Y ) ;
    if you are in SEPERATEFRAME = TRUE

  • How to manually change cpInQuizScope to false

    Hey everyone!
    Is there a way that I can use javascript or something to change cpInQuizScope to false?
    I would like to exclude the first two quiz questions from the ReturnToQuiz scope.  This way, ReturntoQuiz doesn't send the user back to these questions when they don't get them right.
    I have Captivate 6.
    Micky

    I doubt this will ever change, because it is now a dynamic quiz scope and understand that it should be controlled by Captivate. If you want to learn more about which system variables are read only, check my blog post, you can download a descriptive list as well:
    http://blog.lilybiri.com/system-variables-in-captivate-6
    In Captivate 7 only 3 new system variables were added.
    Lilybiri

  • How can I Chang the bank account in iTunes account.

      I cancelled my bank account which was used for my iTunes before, can I Chang my payment on that accont with my other bank account , I try several times, but system always mention me their is some error.

    Hi Rev Dave,
    Q: Now - How Can I Set the Search Field in iTunes to
    the clipboard contents?
    Unfortunately the only way I can think to achieve this involves the use of "UI Scripting". The other previous posters have given you the preferred method you should consider using. If you want to script iTunes so that you visually see the search take place in iTunes you'll need to use the method shown in the script I've posted below.
    Q: Also how can I also open the main library itunes
    window?
    Cyclosaurus has given you the answer to this part of your question already.
    Here is a script that (though ugly IMHO) should achieve what you are asking for:set theSearch to (the clipboard) as string
    tell application "iTunes"
    activate
    set allPlaylists to playlists
    repeat with aList in allPlaylists
    if name of aList is not "Library" then
    set view of front browser window to aList
    exit repeat
    end if
    end repeat
    set LibList to playlist "Library"
    set view of front browser window to LibList
    end tell
    tell application "System Events"
    tell process "iTunes"
    if "iTunes" is not in name of windows or ¬
    focused of window "iTunes" is false then ¬
    keystroke "1" using command down
    keystroke tab
    keystroke theSearch
    end tell
    end tellIn order for the above script to work you need to have "Enable access for assistive devices" enabled in the "Universal Access" section of the "System Preferences" application.
    If you have any further questions about the above script feel free to ask.
    Hope this helps...
    iBook G4 1GHz   Mac OS X (10.4.3)   640 MB RAM

  • Hidden color in PNG transparency. How does photoshop define it and can i change it?

    There is hidden colorinformation in PNG transparency. I need to set the hidden color to black.ow can i change this information?
    You can see the false colorinformation of the PNG, when you open the file in Paintshop Pro.
    My workaround of this is using PSP instead of Photoshop.

    Nice! Never thought of Shift clicking the Mask...Thank you for that information!
    So when i click on the mask, i really get those hidden information. But i cant change it, do i?
    I am using CS6.
    And mask from transparency does not work for Smartobjects or does it?

  • How can i change the color of  header in ouput list of alv?

    My output list heading is 'LIST OF COST CENTERS DATA' How can i change the color of that.
    I was searched in forum but i didn't get.if it is silly question please forgive me.

    we can change the header text color, by using the html font tag.
    < htmlb :tableView id               = "flights"
                                 table            = "<%= controller->it_flight %>"
                                 headerText       = "<font color='red'>Flight Details</font>"  <----are you talking abt this
                                 headerVisible    = "True"
                                 hasLeadSelection = "FALSE"
                                 footerVisible    = "FALSE"
                                 visibleFirstRow  = "1"
                                 onRowSelection   = "onRowSelection"
                                 iterator         = "<%= controller %>"
                                 selectedRowIndex = "<%= controller->row %>"
                                 width            = "100%"
                                 design           = "ALTERNATING" >

  • Can't change photo event names.

    I can't name or rename photo events. How do I fix this?
    I have seen come older threads on this with similar symptoms but nothing recently. I"m on iPhoto 9.5.1

    This link is false and does not work.
    Sent from Windows Mail
    From: Apple Support Communities Updates
    Sent: Saturday, September 27, 2014 4:05 PM
    To: Renso Cruz
    New discussion activity
    Old Toad has posted in the iPhoto for Mac community.
    Can't change photo event names.
    Try the fix for yourself.  It's harmless. Just follow TD's directions explicitly.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26714932-47817 3/OTsig.png
    To post a reply, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • Can we change the name of the cookie - JSESSIONID?

    Can we change the name of the cookie- JSESSIONID?
    for eg.
    Set-Cookie = [ JSESSIONID=6ad8360e0d1af303293f26d98e2a; Version=1; Comment=Sun+ONE+Application+Server+Session+Tracking+Cookie; Path=/]
    can we change it to something like -
    Set-Cookie = [ ServletSession=RkA4OlbgfW; path=/]

    Thankyou Sultal for the response.
    Actually we are migrating the application server from Weblogic5.1 to Sun application server 8.2. The client is a mobile client and it sends the Cookie as 'JSESSIONID=session_id_val&WeblogicSession=session_id_val' as parameters, not as request header.It worked fine for Weblogic5.1 but not in Sun Application Server.
    To make it clear :
    Weblogic           :     request.getsession(false) = sessionObj@value
    Sun Application Server      :     request.getsession(false) = null
    Sun Application Server      :     request.getParameter("JSESSIONID") = session_id_val
    In the Weblogic5.1 we have set the cookie & session parameters in the weblogic.properties file as:
    weblogic.httpd.session.cookies.enable=true
    weblogic.httpd.session.cookie.name=WebLogicSession
    weblogic.httpd.session.neverReadPostData=false
    weblogic.httpd.session.timeoutSecs=120
    In case of Sun application server , JSESSIONID is not coming as a cookie , request.getsession(false) is returning null value.Is there a way to initialize the session with JSESSIONID request parameter?

  • How can I change the disabled of a message text input base on a choice

    how can I change the disabled of a message text input when a dropdown list value is changed? I declare the primaryclientaction but I don't know how to make the event automatically change the disabled of the message text input to true or false.
    HELP!!!! IT'S URGENT....

    Hi,
    assuming you are using ADF Faces:
    Put a submit(); in the on-change javascript event of the dropdown.
    In the disabled property of the input text use some EL to reference the value of the dropdown eg disabled="{#{! bindings.Fruit.inputValue == 'BANANA'}"
    Brenden

  • Can I change the color of a disabled JComboBox ?

    Hi !
    If I use setEnabled(false) the JComboBox has a grey Forground and a grey Background and I cannot use this for printing. I think it is not possible to change the colors of disabled boxes. I have not found a method and than I tried it with ListCellRenderer, but it dont work with disabled boxes. If I have an other possibility to lock the JComboBox and not use setEnabled(false) than I can change the color.
    Can I lock the JComboBox without using setEnabled(false)?
    OR can I change the color of disabled Boxes ?
    Please help me.
    Thank you Wolfgang

    Check the answer in java programming forum.

Maybe you are looking for