Can't change change connection when DB is not available

Hi,
I have to change the connection of my JSP/BC4J application before I create a WAR file. The "Business Components Project Editor" of the root Appmodule does not let my change the connection because the Production-DB of the selected connection is not available.
I'm testing my application against a Test-DB in my local network, but the Production-DB stands in a separate network only reachable via SSH/SCP.
How can I change the connection of my application for deployment on a production system (using Tomcat as web container).
Please, don't tell my that I can manually edit the bc4j.xcfg file. There must be a better way using JDev904. ;-)
Thanx in advance,
Markus

The JPX-level connection is a design-time only connection.
The Configuration Editor is where you would change the runtime connection information.
Or, you could also consider using JDBC Datasources where the connection information is picked up indirectly from the container at runtime.

Similar Messages

  • Can I Connect to 4G LTE with my WIFI IPAD AIR when WIFI is NOT Available? If so, HOW?

    Can I Connect to 4G And LTE with my WIFI IPAD AIR when WIFI is NOT Available? If so, HOW?

    If you wish to do this you can use the WiFi hotspot from an iPhone or other phone with this capability.
    You can also get a dedicated WiFi hotspot device like MiFi. See here: http://www.novatelwireless.com/products/mobile-broadband-solutions/mifi-intellig ent-mobile-hotspots/

  • When I am on my home wifi I can send e-mail.  When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail.  HELP HOW TO FIX.

    When I am on my home wifi I can send e-mail.  When I am not on my home e-mail but on a wifi network or using the 3g network I cannot send e-mail.  HELP HOW TO FIX.

    I know this question is a few years old now, but I recently found myself having the exact same issues;
    Using my iphone or ipad at home created no problems at all, but I couldn't send e mails when away from my home network.
    I recently switched broadband supplier at home and set up a new e mail address, then my problems began!
    I openly admit I'm not great with technology and, to be honest, some of the answers provided on these forums confuse me more than the questions!
    But this worked for me:
    I went along the lines that the fault wasn't with my idevice but possibly with the broadband provider (in my case Plusnet) so I contacted their customer support.
    They referred me to the set up process shown below;
    From your home screen press Settings.
    From the setting menu, choose Mail, Contacts, Calendars followed by Add Account…
    From the Add Account… menu choose Other.
    Fill in your Full Name, Email Address, Password and Description and press Next.If you need help with these, there's more detail underneath the screenshot.
    Full name: Enter your name (or the name you'd like people to see when you send them email)
    Email Address: Enter the address you're setting up, this could be a Plusnet address ([email protected]) or a hosted domain address ([email protected])
    Password: Enter the password for your email address (I don't know what this is)
    Description: Enter a useful description of the email address you're setting up (e.g. Mum's email). You can put whatever you want here
    Press Next to continue.
    More settings will appear. Some will already be filled in.Enter the Incoming and Outgoing Mail Server details and press Next. If you need help with these, there's more detail underneath the screenshot.
    IMAP/POP This will default to IMAP - it's up to you which one you want to use (I don't know what to choose)
    Incoming Mail Server settings
    Host Name: For IMAP this is imap.plus.net - for POP, this is mail.plus.net
    User Name & Password: Enter the username and password for the email address you're setting up (I don't know what these are)
    Outgoing Mail Server settings
    Host Name: relay.plus.net
    User Name & Password: These are optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.Enter the username and password for the email address you're setting up (I don't know what these are)
    When you're finished, press Next.
    If the box shown below appears, press Yes (you may need to do this twice).
    After a minute or two, your email address will be set up and ready to use.If you chose IMAP when setting up you’ll be able to choose whether you want to use Notes (if you chose POP you’ll be taken back to the settings screen from step 2). Press Save when you’re done.
    That's all you need to do. To start checking your email, go back to your home screen and press Mail.
    Now I fully understand that it may be different for each broadband provider but the processes must be similar.
    The key appears to be in setting up the outgoing message server settings in step 5. Where it says "optional, but if you want to send mail while on the move (e.g. while connected to mobile or wireless networks), we recommend filling these in.
    http://www.plus.net/support/email/setup/ios-setup.shtml#pagetop
    Where it says "we recommend" I think it should read "you must fill these in"
    I went back to Settings - Mail,Contacts, Calenders - click on the offending account and click on the account shown.
    Under OUTGOING MAIL SERVER click on the server, in my case relay.plus.net, and click again to show the details. make sure you enter your user name and password and after a few seconds the account will verify and show a load of ticks.
    I tried this on my phone this morning while on 3G only. I sent an email to another of my addresses and immediately got the response that the message couldn't be sent as the recipient was rejected and the message had been placed in my Outbox. I followed the above steps and immediately heard the satisfying "whoosh" as my mail was sent. 10 seconds later another satisying beep as my e mail arrived at my alternate account.
    Hope this helps anyone else with a similar problem.

  • I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

    I can make a WiFi connection but pages will not load.  WiFi works ok on a laptop using Windows.  I have reset the WiFi settings but this makes no difference.

    Thanks, Linc, but  that almost helped:
    Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
    So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
    I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
    Any ideas about the dropped network?

  • How can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

    how can iPhone videos sent to another iPhone be made clear like they were recorded even though it sent as a text. with iMessage it's clear but when it's not available the quality *****, how can I make a received vid clear again??? help

    This is determined by your carrier. SMS/MMS is a poor man's email and by that I mean SMS/MMS has major restrictions and limitations compared to email but is a cash cow for cell phone carriers.
    Upload the video to YouTube when connected via wifi and send the YouTube link via text.

  • Air thinks there is a Midi connection when there is not.  I get no playback audio out of Air.

    Hello..I am trying to rehearse songs for studio session.  Keep getting message that Garageband that my Air thinks there is a Midi connection when there is not.  I get no playback audio.  How do I tell Garageband/Air to stop looking for Midi/Logic?
    It is looking for the Logic Pro used at my recording studio I go to when I transfer my cuts over to the studio's Logic Pro system from my air.  I can probably wait and have my engineer figure it out but hoping somebody here will return a quick answer... Please...thanks!
    I have tried everything I can think of in audio, preferences, etc.
    Seems so simple to tell my Air..hey...we are no longer connected to Logic Pro at the studio!

    19 Views and 0! replies...i must really have an oddball problem...my machine still thinks it needs to look for Midi because it is using LogicPro...at the music recording studio.
    How do I tell it we are at home and act normally so I can hear the Air internal speakers???  Ack!

  • HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

  • After joining the iCloud,how can I download music to store on my iPhone for use when wi-fi not available?

    After joining Icloud,how can I download music to store on my iphone from my library to use when Wi-Fi not available?

    Welcome to the Apple Community.
    What exactly is it you want to do.
    Are you talking about iCloud, iTunes in the cloud or iTunes Match.

  • How to deauthorize computer when password is not available ?

    how do you deauthorize a computer when password is not available ?.

    Hi Chandra
    This is not possible using standard PI file adapter capabilities and you can use Scripts for this. You can send email as well from Scripts.
    BPM can be an option.
    Thanks
    Gaurav
    Edited by: Gaurav Bhargava on Dec 16, 2008 4:27 AM

  • TS1702 I can't download apps it says they are not available how do I fix this?

    I can't download apps it says they are not available how do I fix this?

    You're really posting in the wrong forum. you should be posting here ( https://discussions.apple.com/community/itunes/itunes_store ) Or calling apple support directly.

  • 3930K - what make RAM, when Samsung is not available?

    Sorry, I posted this mistakenly in the software forum.
    Are Samsung 1.35v chips the only ones which work reliably?  What are people using when Samsung is not available is or available in unsuitably small kits (4gb or 8gb)?

    There are several people that use G.Skill Ripjaw-Z 8 GB sticks fully populated without problems, even when overclocked.

  • Change of password when i did not change it.

    I recieved an e-mail this morning saying my password change was successful. I did not change my password.
    The E-mail did not ask for any information nor did it provide a link. So i logged onto my Apple ID account, and changed all passwords, and security questions then added the two step security option.
    My question is should i report this to Apple and if so how. The only option is phone call, but i'd rather just report it via message/e-mail and let Apple deal with it. Also which forum is more appropriate. I cannot find a forum so chose this one to post the question.
    Thanks.

    Many developers when they updated their apps fro the newer iOSs dropped support for the older iOSs. That included Skype and other developers. Unless you have a copy of the apps version that was compatible with your iPod/iOS you are out of luck. Do you cave such a copy in a computer file backup??

  • How do I log off my DSL/Firefox Internet connection when it is not in use?

    With my old dialup/Firefox Internet connection, I could return to the provider's home screen and click on a button to log off. I do not want to be connected to the Internet 24/7, but want to log off when I am not using the service. The provider says I should unplug the incoming cable, but if I do it this way several times a day, it won't be long before I need a new cable. Please tell me that there is a better way.
    Carol Van Etten

    is this similar  http://www.filesaveas.com/jarviser/hubtrouble.html#type9
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Can I mirror MacBook pro mid-10 to apple tv with something when internet in not available

    I have a apple tv 3 and a MacBook pro mid -10. all I want to do is mirror to a projector, sometimes I don't have internet. I do have an airstash but the apple tv will not connect to the network, had the same problem with a wireless hot spot. What can I use to connect to the apple tv?

    You are correct about mirroring upto a point.. (ref: my previous comment from the apple support engineer..  _ I will quote directly.  The Apple  operating system will support Airplay {iincluding mirroring} if it thinks the computer can perorm the task} where the software on the apple TV is version 5.x...
    However I pointed out that you can still send movies..etc. to the appletv, again assuming your appletv software is 5.x..  
    I wish my apple tv did not upgrade.... lesson from this..  keep version 5.x on your apple TV. never upgrade.. too painfull. 
    https://discussions.apple.com/message/25190502#25190502
    Your post of a link is helpfull but for public consumption and an official statemnt from apple, not in reality for version 5.x on apple tv3.
    but.. my comments for version 5.x will be mute if apple tv v 5.x is not used.
    Hope I helped somewhat.

  • HT1212 how can I unlock 4 s when screen does not slide

    what can i do to enter passcode when screen will not slide

    Hi monteduke,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Cheers,
    - Judy

Maybe you are looking for