Can't connect to internet in safe boot mode

I was told to turn on computer,hold down shift till spinning gear comes on,do software update,click on safari,click on reset safari but mac won't connect to internet in safe boot so how do you do software update in safe boot?

EtreCheck version: 2.1.5 (108)
Report generated December 24, 2014 4:09:16 PM EST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM
BANK 0/DIMM0
empty empty empty empty
BANK 1/DIMM0
empty empty empty empty
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
spdisplays_display_connector
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 1:14:55
Disk Information: ℹ️
ST3500418ASQ disk0 : (465.76 GB)
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.76 GB (479.76 GB free)
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.PTUMWDrv (10.5.24) [Support]
[not loaded] com.novatelwireless.kext.wwan (3.0.24) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.48) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.48) [Support]
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) [Support]
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) [Support]
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.7) [Support]
/System/Library/Extensions/NovatelWirelessWWAN.kext/Contents/Plugins
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.24) [Support]
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.3G (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.3GData (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.24) [Support]
[not loaded] com.novatelwireless.driver.NWVBE (3.0.24) [Support]
/System/Library/Extensions/PTUMWDrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.PTUMWCDFree (10.5.24) [Support]
[not loaded] com.devguru.driver.PTUMWCSP (10.5.24) [Support]
[not loaded] com.devguru.driver.PTUMWDIAG (10.5.24) [Support]
[not loaded] com.devguru.driver.PTUMWMdmControl (10.5.24) [Support]
[not loaded] com.devguru.driver.PTUMWMdmData (10.5.24) [Support]
[not loaded] com.devguru.driver.PTUMWUSBMergeNub (10.5.24) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.7) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.7) [Support]
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.smithmicro.vzwwirelessd.plist [Support]
User Launch Agents: ℹ️
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Details]
User Login Items: ℹ️
iTunesHelper UNKNOWNHidden (missing value)
vzwwirelessd Application (/Applications/VZAccess Manager.app/Contents/PlugIns/vzwwirelessd.app)
Skype UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
EPPEX Plugin: Version: 3.0.5.0 [Support]
QuickTime Plugin: Version: 7.6.6
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
      3% WindowServer
      1% fontd
      0% ps
      0% WebProcess
      0% SystemUIServer
Top Processes by Memory: ℹ️
1.30 GB WebProcess
193 MB Safari
64 MB mds
64 MB WindowServer
64 MB Finder
Virtual Memory Information: ℹ️
1.21 GB Free RAM
1.97 GB Active RAM
441 MB Inactive RAM
409 MB Wired RAM
266 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 21, 2014, 04:14:13 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Safari_2014-12-21-161413_[reda cted].crash
Dec 24, 2014, 02:54:55 PM Self test - passed

Similar Messages

Can't connect to Internet via Airport

I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
Anyone can help?

By power downs do you mean Sleep?
One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

I can't connect to Internet. On the list of wireless connections, I have Wireless and thats it. I reset connection networks and it didn't change anything. Please help.

I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Adobe cloud application manager - can not connect to internet

To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian Cleland

The Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem.

Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

I just had a similar problem. Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it. if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on. i had to turn bluetooth off and then manually enter the DNS number.
My solution also came after I re-started my network and reset all the settings on the ipad2. The DNS number then showed along with IP submet Mask and router. I used that dns number to enter into ipad1 after turning bluetooth off on it.
Totally unscientific fix that may have been more coincidental than correct but you might try it. BTW--no idea how bluetooth even got turned on to begin with.

Ipad2 -can i connect to internet using a data card

ipad2 -can i connect to internet using a data card

This article:
http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
depending on your experience level should tell you all you need to know.
You don't need mobile me, you just need to know your mac's ip and have vnc
client software of some sort running on the machine you are travelling with.
Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

Can't connect to internet on my old g4 flat screen, network + airport ok

I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

Can't connect to Internet on my ipad

Can't connect to Internet on my ipad I've tried everything nothing is working. All my other electronic s are working except the ipad help

I don't know what you mean by "everything", but here is a comprehensive Wi-Fi troubleshooting guide:
http://www.apple.com/support/ipad/wifi/

IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
They can't connect via wifi neither via 3G.
If I restart the devices they start to connect again.
I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me, but the issue still persists.
I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
Anyone has having the same issue?

After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
See if that helps.
Good Luck!

After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

Why can't I boot into safe boot mode?

I can't seem to boot my Mac Pro (mid 2010) into safe boot mode. Hold down the shift key and it starts, but the progress bar never goes more than 1/3 and the gear just spins. Any suggestions of what this means and how to fix it? OS 10.6.8.

I have had the exact problem for a while. I finally tried a suggestion from applecare. I had a spare hard drive, erased it, reinstalled mac OSX 10.7 (the issue occurred with 10.6 and 10.7 on my Mac Pro system) and rebuilt my entire system one program at a time. I would safe boot between installs, looking for the culprit (applecare suggested it was likely a third party vendor install that created the problem.) I installed multiple programs, tested safe boot without a hitch. The problem occurred after I installed ReadIris Pro (a comprehensive scanner and OCR program). It created this very problem you and I both seem to have.
Please respond if you have this software package (or any of the IRIS family programs). It is possible it changed a configuration file or interacts with something else on the system. Simply deleting the program does not seem to undo the problem.

5 out of 6 devices can't connect to Internet

Just to preface, this was all working hours ago.
airport express, Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
my Samsung Galaxy s3 has no problems however.
normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
Any ideas would be greatly appreciated.

You want the device that is directly connected to the modem to furnish the PPPoE service.
This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Your settings should look like this:
Connect Using = PPPoE
Account Name = Your user name with your ISP
Password = Your password with the ISP
Verify Password
Service Name.....leave this area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings and the TC will restart
Either delete the PPPoE connection on your Mac, or if you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
Wait a moment or two, then start the modem and let it urn for a moment by itself
Start the TC and wait for a green light
Then start each device one at a time until the network is back up

Can't connect to Internet after sleep mode

Hi,
Most times after put my iBook in sleep mode and reopen it, I can't connect to Internet. I use a normal cable connection by ethernet, but at these times, when I check the network status, it says I don't have any cable connected. The modem apears to be OK, with the computer's light on. I plug off and plug in the cable and it doesn't change and it happens the same when I click in DHCP renew - it just doesn't give any IP adreess. I need to restart the computer to get the connection again.
Ibook G3 700 Mac OS X (10.4.7)

I am trying other solutions today.
It can not change to another wifi network without switch off the wifi.
That's mean I have switch off and re-open the wifi signal every time when it show like this capture.
I waiting for more than 5 mins and it will search another wifi network automatically but it still "No internet connect".
My MacBook Pro is no any WiFi issues.

I need to deactivate CS4 on computer that can't connect to Internet in order to install on new computer

I need to deactivate CS4 on computer that can't connect to Internet in order to install on new computer..what steps can I take to remedy this problem?

Since your computer cannot connect to the internet you may have to talk to a support person. See this page
Contact Customer Care
You can always install on a second computer without deactivating

HT5304 Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet with cable or wifi ! can see network and router,. Help

Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !

recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

Can't connect to internet in safe boot mode

Similar Messages

Maybe you are looking for