Can't connect to Internet or bthomehub.home throug...

I've had BT Broadband (Homehub 3, not Infinity) since the start of June without any problems. This morning at about 8:15am it stopped working. I can't connect to the network on any device (although it is visible), and if I plug directly in through the ethernet cable I can't even connect to bthomehub.home or 192.168.1.254 (page not found on both).
All three lights on the front of the box are blue and not flashing. Resetting the router (factory or just with the Reset button), movnig it to another phone socket, or leaving it turned off for 10 minutes all have no effect. I can't get it to work with a variety of devices (Android, Windows, Smart TV). No configuration changes have been made to the router. I've replaced the microfilter too.
If I plug directly into the router with an ethernet cable and run Windows Network Diagnostics it says ""Local Area Connection" doesn't have a valid IP configuration". Again, I haven't modified any settings within my machine or the router.
Any advice greatly appreciated!

can you not entyer the hub manager by entering 192.168.1.254? you do not need an internet conenction to enter hub manager - just to see if hub will allow access or is it knackered and needing replaced
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

IPhone can't connect to internet on my home WiFi, works everywhere else

For a while I would get the "unable to join network" error, but renewing the lease or resetting the router would usually fix it. Now I can sign onto the WiFi, but I get page load errors and timing out on everything until I turn WiFi off on the phone. I have tried resetting network settings, manually inputing my phones Mac address into the router, changing the security mode on the router, resetting the WiFi settings on the router, still, no internet for iPhone.
Other Android phones, an iPad, Apple TV, Laptops and Desktops have all been able to access the internet through WiFi as well. My iPhone has no trouble using the internet on other WiFi networks. Have I somehow black listed myself in my router settings? Or have I somehow blocked the internet in the phone settings for just this network?

I looked into that and couldnt' figure out how. I've just now completely disabled "managed devices" and "managed services" under parental controls and that seems to have made it work. My room mate was having trouble with his laptop as well. I'm the only person who ever logged into the router's admin panel and I never added any devices to any parental control that I know of. I just looked at the log and noticed it had some blocked packets, the IP matched the one assigned to my phone, so somehow I got parental blocked :-/

Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

I just had a similar problem. Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it. if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on. i had to turn bluetooth off and then manually enter the DNS number.
My solution also came after I re-started my network and reset all the settings on the ipad2. The DNS number then showed along with IP submet Mask and router. I used that dns number to enter into ipad1 after turning bluetooth off on it.
Totally unscientific fix that may have been more coincidental than correct but you might try it. BTW--no idea how bluetooth even got turned on to begin with.

Can't connect to internet via MacBook Pro to Airport Extreme

I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.

Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.

I can't connect to Internet. On the list of wireless connections, I have Wireless and thats it. I reset connection networks and it didn't change anything. Please help.

I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Full coverage with 3G Coverage can't connect to internet

Full bar with 3G COVERAGE can't connect to Internet. This goes the same with personal hotspot and the internet browser and apps that required internet. After reset by pressing the "on/off button" + "home" button , "RESET ALL NETWORK" , or even restarting the phones , after sometimes of normal operations it's back to the same cycle.
I'm using iPhone 5s with iOS 7.1.
Anyone have any solutions?
Thank you.

Hi,
If the router isn't in guarantee,the RESET Button is electric contact maker,if you dont do that before,dont do it - open router,see on the plate where are weld a reset button's pins,set the contact between them and hold for a 30-40 may be a minute,and it should go to reseting.But if you dont do that before,dont do it and now.
In the resset button have 2 wafers,if they are oxidated,they cant doing a el.contact.
Good Luck!!!!
Thanks
Kind Regards
ing.George Gochev
DSL and Telecommunications Engineer

Adobe cloud application manager - can not connect to internet

To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian Cleland

The Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem.

Ipad2 -can i connect to internet using a data card

ipad2 -can i connect to internet using a data card

This article:
http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
depending on your experience level should tell you all you need to know.
You don't need mobile me, you just need to know your mac's ip and have vnc
client software of some sort running on the machine you are travelling with.
Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

Can't connect to internet on my old g4 flat screen, network + airport ok

I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

Can't connect to Internet on my ipad

Can't connect to Internet on my ipad I've tried everything nothing is working. All my other electronic s are working except the ipad help

I don't know what you mean by "everything", but here is a comprehensive Wi-Fi troubleshooting guide:
http://www.apple.com/support/ipad/wifi/

Can't connect to Internet via Airport

I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
Anyone can help?

By power downs do you mean Sleep?
One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
They can't connect via wifi neither via 3G.
If I restart the devices they start to connect again.
I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me, but the issue still persists.
I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
Anyone has having the same issue?

After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
See if that helps.
Good Luck!

Can't connect to internet after firmware update?

well last night i did a firmware update and now i can't connect to my network at home. i have a server running dhcp. so i gave the extreme a static ip in the range. dns and router ip are set to the servers ip. this all was working fine till last night. what am i doing wrong? i can't even log onto the server from my MBP. the APE is connected directly by ethernet to the server.
thanks

HI and welcome......
On your iPad...
Tap Settings / General / Reset / Reset Network Settings.
That resets to factory default. You may be prompted for your network password.
Hope that helps...
Carolyn

After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

5 out of 6 devices can't connect to Internet

Just to preface, this was all working hours ago.
airport express, Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
my Samsung Galaxy s3 has no problems however.
normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
Any ideas would be greatly appreciated.

You want the device that is directly connected to the modem to furnish the PPPoE service.
This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Your settings should look like this:
Connect Using = PPPoE
Account Name = Your user name with your ISP
Password = Your password with the ISP
Verify Password
Service Name.....leave this area completely blank
Connection = Always On
Disconnect if Idle = Never
Update to save settings and the TC will restart
Either delete the PPPoE connection on your Mac, or if you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
Wait a moment or two, then start the modem and let it urn for a moment by itself
Start the TC and wait for a green light
Then start each device one at a time until the network is back up

Can't connect to Internet or bthomehub.home throug...

Similar Messages

Maybe you are looking for