Can't connect to new router...

Question

Hi
I've just installed a new intranet here at my place and one of the changes is that my computer must connect to another router now. While everything works perfect in both Knoppix and windows, I can't get Arch to connect....
I've collected all files to show you my situation (I think):
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_GB.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Brussels"
KEYMAP="be-latin1.map.gz"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=(pcmcia)
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(ath_pci fglrx powernow-k8)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="icarus"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.123.254"
#gateway="default gw 192.168.1.1"
ROUTES=(gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@syslog-ng iptables @network !netfs @hal @crond !ifplugd @alsa @ddclient @denyhosts @sshd @mpd @powernowd)
# End of file
lspci -vvv section for my network card:
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Unknown device 1631:d008
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at ff3ef400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 50000000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig output:
eth0 Link encap:Ethernet HWaddr 00:13:D3:8B:9E:89
inet addr:192.168.123.1 Bcast:192.168.123.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:690 (690.0 b) TX bytes:994 (994.0 b)
Interrupt:19 Base address:0x400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:68 errors:0 dropped:0 overruns:0 frame:0
TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3998 (3.9 Kb) TX bytes:3998 (3.9 Kb)
lsmod:
Module Size Used by
nls_cp437 5888 1
vfat 10880 1
fat 45852 1 vfat
cpufreq_userspace 3536 1
ipt_REJECT 3968 1
ipt_LOG 6144 8
nf_conntrack_ipv4 14092 6
xt_state 2432 6
nf_conntrack 52872 2 nf_conntrack_ipv4,xt_state
nfnetlink 4760 2 nf_conntrack_ipv4,nf_conntrack
xt_limit 2560 10
xt_tcpudp 3328 22
iptable_filter 2688 1
iptable_mangle 2560 0
ip_tables 10452 2 iptable_filter,iptable_mangle
x_tables 11908 6 ipt_REJECT,ipt_LOG,xt_state,xt_limit,xt_tcpudp,ip_tables
isofs 31040 0
zlib_inflate 16256 1 isofs
tda827x 6916 1
saa7134_dvb 15884 0
dvb_pll 12292 1 saa7134_dvb
ohci1394 31408 0
ieee1394 81720 1 ohci1394
video_buf_dvb 4996 1 saa7134_dvb
dvb_core 71976 1 video_buf_dvb
tda1004x 15492 2 saa7134_dvb
snd_seq_oss 29312 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
ppdev 7556 0
lp 9348 0
tuner 61352 0
usb_storage 79296 1
snd_pcm_oss 37024 0
snd_mixer_oss 14592 1 snd_pcm_oss
firewire_ohci 15360 0
firewire_core 36032 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
pcspkr 2944 0
saa7134 119244 1 saa7134_dvb
ppp_generic 23828 0
slhc 5760 1 ppp_generic
ide_core 112580 1 usb_storage
8139cp 19584 0
8139too 23168 0
mii 4864 2 8139cp,8139too
video_buf 20356 3 saa7134_dvb,video_buf_dvb,saa7134
compat_ioctl32 1536 1 saa7134
ir_kbd_i2c 7184 1 saa7134
ir_common 30084 2 saa7134,ir_kbd_i2c
videodev 26752 1 saa7134
v4l2_common 15744 3 tuner,saa7134,videodev
v4l1_compat 14084 2 saa7134,videodev
parport_pc 35556 1
parport 31304 3 ppdev,lp,parport_pc
serio_raw 5764 0
psmouse 35984 0
snd_atiixp 15884 2
snd_ac97_codec 95652 1 snd_atiixp
ac97_bus 2432 1 snd_ac97_codec
snd_pcm 69124 4 snd_pcm_oss,snd_atiixp,snd_ac97_codec
snd_timer 19332 3 snd_seq,snd_pcm
snd 45028 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 7816 2 snd_atiixp,snd_pcm
rtc_cmos 7328 0
rtc_core 14984 1 rtc_cmos
rtc_lib 2944 1 rtc_core
sg 26652 0
k8temp 4864 0
i2c_piix4 7948 0
i2c_core 20352 8 tda827x,saa7134_dvb,dvb_pll,tda1004x,tuner,saa7134,ir_kbd_i2c,i2c_piix4
ehci_hcd 30732 0
tsdev 6720 0
ati_agp 7308 0
ohci_hcd 19588 0
evdev 8192 4
thermal 10888 0
fan 3844 0
button 6160 0
battery 8324 0
ac 4100 0
powernow_k8 13972 0
freq_table 3984 1 powernow_k8
processor 24788 2 thermal,powernow_k8
fglrx 726624 11
agpgart 27224 2 ati_agp,fglrx
wlan_scan_sta 12416 0
ath_rate_sample 13312 1
ath_pci 104744 0
wlan 195504 4 wlan_scan_sta,ath_rate_sample,ath_pci
ath_hal 231264 3 ath_rate_sample,ath_pci
usbcore 112520 4 usb_storage,ehci_hcd,ohci_hcd
ext3 119432 3
jbd 54312 1 ext3
mbcache 6916 1 ext3
sr_mod 14756 0
cdrom 34336 1 sr_mod
sd_mod 22784 8
pata_atiixp 5888 2
sata_sil 8456 4
ata_generic 5380 0
libata 108084 3 pata_atiixp,sata_sil,ata_generic
and dmesg output after a fresh bootup:
Linux version 2.6.22-ARCH (root@workstation64) (gcc version 4.2.1) #1 SMP PREEMPT Fri Aug 31 19:54:09 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 262096) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262096
early_node_map[1] active PFN ranges
0: 0 -> 262096
On node 0 totalpages: 262096
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32465 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP 000F90C0, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFD0000, 0038 (r1 A M I OEMRSDT 7000520 MSFT 97)
ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 7000520 MSFT 97)
ACPI: DSDT 3FFD0430, 397A (r1 0AAAA 0AAAA000 0 INTL 2002026)
ACPI: FACS 3FFDE000, 0040
ACPI: APIC 3FFD0390, 005C (r1 A M I OEMAPIC 7000520 MSFT 97)
ACPI: MCFG 3FFD03F0, 003C (r1 A M I OEMMCFG 7000520 MSFT 97)
ACPI: SSDT 3FFD3DB0, 0D6E (r1 ATI ATIPATCH 1 INTL 2002026)
ACPI: OEMB 3FFDE040, 0056 (r1 A M I AMI_OEM 7000520 MSFT 97)
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:7 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
Built 1 zonelists. Total pages: 260049
Kernel command line: root=/dev/sda1 rootfstype=ext3 ro vga=795 clock=pit
Warning! clock= boot option is deprecated. Use clocksource=xyz
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2189.023 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034320k/1048384k available (2393k kernel code, 13332k reserved, 783k data, 304k init, 130880k highmem)
virtual kernel memory layout:
fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0421000 - 0xc046d000 ( 304 kB)
.data : 0xc035641f - 0xc041a1bc ( 783 kB)
.text : 0xc0100000 - 0xc035641f (2393 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4382.14 BogoMIPS (lpj=7301039)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
Total of 1 processors activated (4382.14 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:0b: ioport range 0xe00-0xe7f has been reserved
pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
Time: pit clocksource has been installed.
PCI: Bridge: 0000:00:02.0
IO window: 7000-7fff
MEM window: ff200000-ff2fffff
PREFETCH window: bff00000-dfefffff
PCI: Bridge: 0000:00:14.4
IO window: 8000-8fff
MEM window: ff300000-ff3fffff
PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 481k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7680k, total 262144k
vesafb: mode is 1280x1024x24, linelength=3840, pages=67
vesafb: protected mode interface info at c000:5977
vesafb: pmi: set display start = c00c5a0b, set palette = c00c5a57
vesafb: pmi: ports = 7810 7816 7854 7838 783c 785c 7800 7804 78b0 78b2 78b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 304k freed
libata version 2.21 loaded.
sata_sil 0000:00:11.0: version 2.2
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 cmd 0xf881ec80 ctl 0xf881ec8a bmdma 0xf881ec00 irq 16
ata2: SATA max UDMA/100 cmd 0xf881ecc0 ctl 0xf881ecca bmdma 0xf881ec08 irq 16
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 cmd 0xf8826880 ctl 0xf882688a bmdma 0xf8826800 irq 17
ata4: SATA max UDMA/100 cmd 0xf88268c0 ctl 0xf88268ca bmdma 0xf8826808 irq 17
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:14.1 to 64
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 > sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: ATA-6: ST3160021A, 8.01, max UDMA/100
ata5.00: 312581808 sectors, multi 16: LBA48
ata5.00: configured for UDMA/100
ata6.00: ATAPI: _NEC DVD_RW ND-3530A, 2.01, max UDMA/33
ata6.00: configured for UDMA/33
scsi 4:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 4:0:0:0: [sdb] Attached SCSI disk
scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3530A 2.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
wlan: 0.8.4.2 (0.9.4)
ath_pci: 0.9.4.5 (0.9.4)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 19
ath_pci: switching rfkill capability off
ath_rate_sample: 1.2 (0.9.4)
ath_pci: switching per-packet transmit power control off
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 7.9 phy 4.5 radio 5.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xff3f0000, irq=19
Linux agpgart interface v0.102 (c) Dave Jones
[fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[fglrx] USWC is disabled in module parameters
[fglrx] PAT is disabled!
[fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
ACPI: duty_cycle spans bit 4
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 20, io mem 0xff6fe000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 20, io mem 0xff6fd000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
sr 5:0:0:0: Attached scsi generic sg2 type 5
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 20
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 20, io mem 0xff6fc000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 8 ports detected
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
usb 3-2: new high speed USB device using ehci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 2-3: new full speed USB device using ohci_hcd and address 2
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
PPP generic driver version 2.4.2
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 19
eth0: RealTek RTL8139 at 0xf913e400, 00:13:d3:8b:9e:89, IRQ 19
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
usb 2-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI version 1.10
ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 22
firewire_core: created new fw device fw0 (0 config rom retries)
input: PC Speaker as /class/input/input4
input: ImExPS/2 Logitech Wheel Mouse as /class/input/input5
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
saa7133[0]: found at 0000:02:01.0, rev: 208, irq: 21, latency: 64, mmio: 0xff3ef800
saa7133[0]: subsystem: 1043:4857, board: ASUSTeK P7131 Dual [card=78,autodetected]
saa7133[0]: board init: gpio is 0
input: saa7134 IR (ASUSTeK P7131 Dual) as /class/input/input6
saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 1-004b: chip found @ 0x96 (saa7133[0])
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
tuner 1-004b: setting tuner address to 61
tuner 1-004b: type set to tda8290+75a
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0]).
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
scsi 6:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
sd 6:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 6:0:0:0: [sdc] Attached SCSI disk
sd 6:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 7:0:0:0: [sdd] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg4 type 0
scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 7:0:0:1: [sde] Attached SCSI removable disk
sd 7:0:0:1: Attached scsi generic sg5 type 0
scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 7:0:0:2: [sdf] Attached SCSI removable disk
sd 7:0:0:2: Attached scsi generic sg6 type 0
scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 7:0:0:3: [sdg] Attached SCSI removable disk
sd 7:0:0:3: Attached scsi generic sg7 type 0
usb-storage: device scan complete
tda1004x: found firmware revision 29 -- ok
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 522072k swap on /dev/disk/by-path/pci-0000:00:11.0-scsi-0:0:0:0-part5. Priority:-1 extents:1 across:522072k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8190 buckets, 65520 max)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Unknown InputIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:6b:27:96:74:08:00 SRC=192.168.123.254 DST=255.255.255.255 LEN=331 TOS=0x00 PREC=0x00 TTL=64 ID=64771 PROTO=UDP SPT=67 DPT=68 LEN=311
Unknown InputIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:6b:27:96:74:08:00 SRC=192.168.123.254 DST=255.255.255.255 LEN=331 TOS=0x00 PREC=0x00 TTL=64 ID=65027 PROTO=UDP SPT=67 DPT=68 LEN=311
Marking TSC unstable due to: cpufreq changes.
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48114 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48117 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Clocksource tsc unstable (delta = -90943342 ns)
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
My router's IP is 192.168.123.254 but if I ping that address or I try to connect to the web interface on that address to configure the router I can't get any connection...  I've also tried to specify all paramaters directly in rc.conf (eth0="eth0 192.168.123.1 netmask 255.255.255.0 broadcast 192.168.123.255") but that didn't help neither.
I'm kind of out of ideas on how to solve this... I hope someone here will help me getting out of windows (the only OS on my pc with internet FTM).

Answer 1

I'm so stupid... I should've thought about iptables... I'm reconfiguring them now, thank you very much!