Can't convert Lossless files to iPod version

I know this has been asked and answered for iTunes 9. I hope there is an easy solution for 10.5.3
I have imported hundreds of songs at Apple Lossless, I'm a stickler for sound quality. My iPod classic has plenty of room to load them.
My wife got a 16gb iPhone and wants tio use it as her only iPod.
I need to create lower quality versions of the songs I already have, say 128 or 160 versions. When I highlight songs and go to Advanced, the option to create an iPod or iPhone version is grayed out. I used to be able to convert and store two versions. Is this no longer doable?

Yes it is possible.
iTunes: How to convert a song to a different file format - http://support.apple.com/kb/HT1550 - including information about different formats and discussion about compression.
Topic: Need to convert mp4 to mp3 - Zevoneer's post on converting songs - http://discussions.apple.com/message.jspa?messageID=9244740
I don't think the "convert to ipod" format is presented unless you are actually synching to a device at the time, but you can convert to 128k AAC at any time if you don't mind ending up with a lot of extra copies in naother format.

Similar Messages

Can't Convert Lossless Files From USB Drive to AAC?

Hello, I have a conversion problem from some Lossless files that I have put in a USB drive (so I won't have to keep re-importing the CD's). Everytime I try to convert, I get this:
But if I import the CD's into Lossless THEN convert to AAC from the imported file, it works! I don't want to keep importing, but I want to keep the original files on my USB drives ...please help!

Hello ed and thank you for replying!
Well, I did drag the Lossless files from iTunes to the USB and I did check the properties of the file in the USB and well, I see it is an MPEG-4 audio file (like my other song files are in iTunes).
and I'm sorry if I can't exactly find out if there are CDA files or not.
I also did try ripping the CD files and placing them on the USB but I will try again!

ITunes not Syncing Lossless files to iPod?

Itunes not syncing Apple Lossless files to iPod?
I had a couple FLAC encoded CD's, and i recoded them into Apple Lossless using dBpoweramp.
These Apple Lossless files load perfectly into iTunes (Playable)
But no matter what I do, I can't get iTunes to put the files onto my iPod. But from what I've seen, my iPod should support these files! (I tagged all the lossless files with a unique Artist name, and told iTunes to only sync that Artist. Even then it wouldn't sync.)
Ipod Classic 6th gen 120 gb, Software version 2.0.1
iTunes version 9.0.1.8
Using Windows 7 RC 64-bit
How do I get this to work?

Same problem here, same application versions. I'm trying to get them to sync to an iPhone but it doesn't actually sycnc. They play without issue in iTunes. I converted them from flac to Apple lossless using dbpoweramp.
Any suggestions would be helpfull

How to convert rm files to ipod in windows

im trying to convert a rm file to a format that my ipod will recognize, im using cucuosft and other programs that seem not to be able to convert to the right format, it says i need to install some codec!!im using windows..can anybody help please.

No it is still there.
Ctrl B to turn on top menu.
Select your video file to convert
then
File > Create New Version > Create iPad or iPod Version
or
File > Create New Version > Create iPad or Apple TV version

How can I convert .swf file to exe file?

thanks

Hi
Thank for your choise.
If showing only white screen, please download the lastest version, v2.03.
http://www.bullrushsoft.com/download.html
This problem occurs in Win7 sp1, especially IE has been upgraded to v10.
Our SWF to EXE Converter must need the FlashPlayer plugin for IE, it 's not a atandalone program.
So it only 880KB.
Our online converter is the adobe flash player exe, it can be embed the swf into, and standalone, so its size > 4MB.
More details, please visit http://www.bullrushsoft.com/online.html
Best Regards.
2013-08-11
Bullrushsoft Support Team
From: mmshahid73
Date: 2013-08-11 02:52:01
To: Sandro_brs
Cc:
Subject: _How_can_I_convert_.swf fileto_exe_file?
Re: How can I convert .swf file to exe file?
created by mmshahid73 in Flash Ad Development - View the full discussion
Hi, I used bullrushsoft SWF to EXE converter, but the created EXE file showing only white screen, i think i need to add flash player also but i don't know how to add flash player duriing swf to exe conversion.
Because when i converted swf into exe from my pc, it showing size 880 KB where swf file size is 413 KB, onthe other hand, I convert the same online which is playing correctly but the converted file size is 4.57 MB.
Am i right?
Kindly help
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5583680#5583680
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5583680#5583680
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5583680#5583680. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Ad Development by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How Can I convert Freehand files in Illustrator CC?

I have a new IMac on OS X Mavericks. I am to to the CC level. I have 25 years of Freehand files that I need access to. How can I convert these files to get them open in CC. Thanks

Skiman, Monika, WJT,
These are my findings:
Access through CC goes no further back than CS6, and there seems to be no plan to change that.
This means that it is necessary to have or acquire a licence to get access to an older version.
Adobe has started setting up a set of pages for downloading older versions (requiring a licence) here, so far covering CS6 and CS5.5:
https://helpx.adobe.com/download-install.html
http://www.adobe.com/downloads/other-downloads.html
Until (even) older versions are added, this thread made by staff about downloading the old stuff, with its reference to the Prodesign Tools page is recommended:
http://forums.adobe.com/message/5418120#5418120
http://prodesigntools.com/tag/ddl
The last link goes back to CS3.

How can I convert .mov files for use with other apps?

When loading movies taken on a friend's digital camera to my PC, the video files were saved as Quicktime .mov files. I am now unable to pull those files into any other software program (I want to put them onto a CD or DVD and play on external players.) How can I convert .mov files to a .wmv or .avi or mpeg?
Thanks - J
RS720G Windows XP

Kodak Digital Camera QuickTime MOV Problems
After battling a number of serious problems with the videos taken by my new Kodak Digital Camera, I decided to write up this page so that anyone searching the web would find out the true answers without as much grief!
I’ve also made some other comments about my experience with the camera, in case anyone was considering buying a Kodak camera in the near future.
I bought the camera just before Christmas 2004 in the US. At the time of writing, it is a pretty good model for domestic use—about 5.2 megapixels, costing about US$400 (or AU$600 back here in Australia). From a company as reputable as Kodak, I expected no problems.
The first disappointing thing was that the spring inside the spring-loaded battery clip, inside the camera, came loose within days. It proved impossible to reattach it without completely dismantling the camera, which (despite my engineering qualifications) I was not willing to do. This would usually have been a warranty item, but Kodak’s warranty does not extend to other countries. I’ve since had to jam cardboard in to keep the battery clip engaged, and have taped the battery bay shut to avoid it opening accidentally when taking the camera out of the case. This works fine with the docking station (an extra AU$100!), but it means I can no longer charge the battery without the docking station (since you need to take it out to charge it). I was not impressed!
The camera takes good photos, and I have no complaint with that. The controls and camera menus are well-designed. The large display is excellent.
The EasyShare software is not as easy to use as it looks, has a habit of crashing, has a web update program that is always running in the background of Windows, and transferring images is nowhere as easy or quick as it should be. I’ve now uninstalled it completely, and simply copy the photos directly from the device. (If the camera memory is nearly full, and you just want to transfer the last few photos, then it’s impossible to use the EasyShare software to browse the camera’s photos without it actually downloading the whole lot through the USB cable—and it takes forever! Copying from the device directly doesn’t hit this bug.)
The capability to take video using the camera was a great attraction when I selected it, and, if it worked properly, it would make it quite a handy little camcorder in its own right. With a 512 MB memory card in it, over an hour of video can be recorded at Video-CD quality (320 x 240 24fps video, 8 kHz audio). It’s not full digital video, but it would still be a pretty good feature for a US$400 camera. If it worked.
The first disappointing thing about taking videos is that the optical zoom cannot be adjusted while the camera is recording. It can only be adjusted between video sequences. I don’t know why this restriction was made in the design.
The real problems, however, start when you try to do anything with the video clips captured by the camera. Kodak has chosen to capture the videos in QuickTime format. This is fine—QuickTime is, technically, excellent—except that there is no simple way to convert QuickTime MOV files to AVI or MPEG or VCD. The Kodak software comes with a QuickTime player, so you can see the video clips on the computer you installed the software on—and they look good. Problem is that you can’t just dump those MOV files onto your Video-CD creator (it will usually want AVI or MPEG files).
It takes some time to realise that Kodak have not even bothered to include any software with the camera that can convert these MOV files to a more useful format. This is a serious PR blunder, and anyone bitten by this is unlikely to go near the Kodak brand ever again.
After some web searching, owners of these cameras generally find that the best (only?) freeware solution to convert MOV to AVI is Bink and Smacker’s RADtools program.
RADtools is amazingly powerful for the price (i.e. free), but it hits two fundamental problems with Kodak Digital Camera MOV video files, that are the fault of the Kodak camera, not RADtools. (I know this because every other MOV converter hits the same problems—except one, as you will see below.)
The first problem is that the sound cannot be converted properly. When you convert any Kodak MOV files, there is an “aliasing” of the sound at the upper frequencies. This is a technical description—you get a whispery, tinny, C3PO type of echo to everything. It really destroys the quality of the video clips (especially bad when I am trying to capture priceless memories of my 4- and 7-year-old sons—I don’t want their voices destroyed for all time).
Every conversion program I tried ended up with the same audio problem. I concluded that it is something strange in the way the Kodak cameras store the MOV files.
Strangely enough, I noticed that the QuickTime player didn’t distort the audio like this. The audio sounds just fine through QuickTime. More on this shortly.
The second, more serious problem is that RADtools could not properly convert some of the video clips at all. (This problem only affected less than 10% of the clips I originally filmed, but most of those clips were very short—less than 20 seconds. It seems that the probability of this problem gets worse, the longer the clip.) RADtools would misreport the number of frames in the clip, and would stretch out a small number of frames of video (in slow motion) to match the length of the audio.
Again, I confirmed that this is a property of some of the MOV files stored by the camera. Other conversion tools also had problems with the same MOV clips.
After more angst, I found a number of websites in which frustrated owners of these Kodak cameras have reported the exact same problems.
It was only then that I discovered that QuickTime itself can convert MOV files to AVI. Believe it or not, it’s built into the QuickTime Player that Kodak supplies, or that you can download free from apple.com. The problem is that you can’t use it unless you pay Apple to upgrade to QuickTime Pro.
After realising that this would probably be the only way to get decent audio for these clips, I paid the AU$59 to Apple Australia to get the licence key that enables the extra “Pro” menu options in QuickTime.
Sure enough, you can “Export” any MOV file to a number of formats, including AVI. And guess what? The audio comes out fine!
So, the first piece of advice I can give is: pay Apple the US$29 (or whatever amount it is in your country) to upgrade QuickTime to QuickTime Pro.
From here, however, there are still a few snags to untangle.
The first is that the default settings for Exporting to AVI don’t give a great result. It defaults to the Cinepak codec, medium quality. This looks terrible compared to the original QuickTime movie. Even on maximum quality, that codec just doesn’t give good results.
I finally found that the best option is to use the Intel Indeo Video 4.4 codec, set on maximum quality. This creates AVI files that are 10 to 20 times larger than the original MOV files, but the quality is there. If (like me) you only want the AVI files so you can dump them into your Video-CD program, then you want to keep the quality as high as possible in this first step. The extra hard disk space is not really a concern. When your VCD program converts the AVI files to MPEG, it will compress them to the usual VCD size.
Now for the biggest snag: those problem MOV files are still a problem, even for QuickTime Pro. Unbelievably, these Kodak cameras are spitting out MOV files which have some sort of technical flaw in their data specifications. QuickTime is able to play them back fine—and that seems to be all that the Kodak engineers really checked. However, if QuickTime Pro tries to export them, then when the progress bar gets to the end, it never finishes. It just keeps going. If you check the output folder with Explorer, and keep hitting F5 to update the file listing, you can see the file getting bigger, and bigger, and bigger. It never stops.
That this happens even for QuickTime itself (the native format for these files) confirms that the problem is with the software built into these Kodak cameras. It would be nice it they issued a patch or a fix. I couldn’t find one.
Fortunately, there is a “workaround” for this problem. I found it when trolling the net trying to find solutions to all these problems. The workaround is to use QuickTime Pro’s cut and paste facility. Open the problem MOV file, then press Ctrl-A (the standard key combination for “select all”—in this case it selects the entire film clip, as you can see by the grey selection of frames at the bottom of the player). Then hit Ctrl-C (i.e. copy, which in this case copies all the frames, but not the incorrect data structure in the original MOV file). Now hit Ctrl-N (i.e. new, in this case a new MOV file or player). In this new player, press Ctrl-V (i.e. paste). Now you have a new version of the MOV file with the bad data structure exorcised. You can save this under a new name, but make sure you specify “Make movie self-contained”—otherwise, it will simply be a link to the original (bad) MOV file, which you are probably going to delete once you save the exorcised version. (You also cannot overwrite the original file, because it needs to access that to make the “self-contained” movie. You need to give it a slightly different name, save it “self-contained”, then delete the original and rename the new copy back to what you wanted it to be. A pain, I agree, but at least the **** thing works—finally!)
The exorcised MOV file can now be used to Export to AVI format. (I also keep all the MOV files on a separate CD, in case I want to reconvert them to a different format in the future. I figure it’s better keeping the exorcised ones than the haunted ones.)
So I hope that all this answers a few of your questions. No, you weren’t being incredibly stupid.

Can iTunes convert a file and replace the old file with the new one?

I am trying to convert my wav files to Apple Lossless to save some space. How can I convert the files and make them replace the old files? Right now it just converts new files so that I end up with two files. I have thousands I want to convert and just replace the old ones.
I have an external program that will do it for me, however if I go that route then when my ITunes files are converted to lossless files I need to re-link the files as they show up with the ! showing they are missing. That would mean manually re-linking every song, which would take forever unless there is a way to mass re-link all the files.

iTunes does not see the newly created files as the same file because they are not the same file. They are new, different files. If you have a track that is 1234.wav and you create 1234.mp3 it simply isn't the same file and you can't trick iTunes into thinking it is. iTunes will handle it as a brand new file.
Check Dougscripts web site for scripts which help modifying tag data. However, I suspect you won't find any doing exactly what you want doing. Some tag data are only accessible by iTunes itself.
As for playlists, there's things you can try though they may be more effort than they are worth. For example, you could add a special code for each playlist to some element of a tag (e.g., grouping). Convert the file, then make a smart playlist selecting for the code you added to the group of tracks in the old playlist. If you have hundreds of playlists with a dozen tracks each this will be a grand nuisance. If it is a handful of playlists with hundreds of tracks each this might be worth it.
Another way to preserve playlists would be to edit the .xml copy of the iTunes library file, replacing ".wav" with ".mp3" or whatever format you are using. However, this won't help with play counts because that is only stored in the .itl copy of the file which you cannot edit.

HT1550 Can i Convert my files that are F00...F49

Can I convert my files that are F00...F49 to look like the rest of my file (had a computer crash,,,use ipod to get my music back in itunes)
Some file are song titles/albums ect others are F00..F49
they appear this way in my backup files

F00..F49 are the names of the folders of media content on the iPod. Inside will be a bunch of files with four letter names. As long as they're not .wav files it should be possible to recover them and reconstruct the core of the library from the embedded tags.
See the iLounge link near the bottom of Recover your iTunes library from your iPod or iOS device.
tt2

How can I convert multiple files at one time and not one at a time

How can I convert multiple files at one time and not one at a time

Hi Plissey1950,
Sorry for the lengthy delay to a response. Are you trying to convert multiple files to individual PDF files at the same time? (not combine them). If so, you'll need to use Adobe Acrobat for this function. The CreatePDF service does not have the ability to convert multiple files to multiple individual PDF files.
Thanks,
David

How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
The answer depends on the type of video files you want to convert. If they are DRM protected commercial videos, no help can be given here. Google.

How can I convert MPEG files (stored on a PC) to use in iMovie on my Macbook Pro?

How can I convert MPEG files (stored on a PC) to use in iMovie on my Macbook Pro?

Get a free app called MPEG Streamclip.
Available here.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Drag your clip or clips into MPEG Streamclip. Then use FILE/EXPORT TO QUICKTIME to export the clips in Apple Intermediate Codec.
Sometimes, MPEG2 clips also require that you install the Apple QuickTime MPEG2 Playback Component. MPEG Streamclip will tell you if you need this. This is available from Apple for $20.

How can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

how can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?

As has been mentioned Adobe Reader cannot export PDF page content. Nor can it create PDF or manipulate PDF page content.
What you can do is use one of Adobe's online subscription services. Two provide for PDF to Word export.
There's ExportPDF and PDF Pack.
Be well...

How can i transfer music files on iPod from iPhone 4?

Hi,
how can i transfer music files from iPod from iPhone using Bluetooth.
Thanks in advance,
Suresh Balakrishnan

you can't
synch both with a computer is the only way

HT3258 How can I convert Clariswork files to be used on my iMac OSX 10.8.3

How can I convert Clariswork files so I can use them on my iMac OS X 10.8.3?

Have you tried googling, "convert old clarisworks files"? There are pages of answers to meet every style.

Can't convert Lossless files to iPod version

Similar Messages

Maybe you are looking for