Can't copy some files from Windows 7 to Mac OSX over network

Hi,
I'm running the latest version of Max OSX v10.8.4 on a brand new Macbook Pro.
I have followed the setup instructions at http://www.7tutorials.com/how-change-workgroup-mac-os-x-easy-networking to access my Macbook from Windows, and http://www.howtogeek.com/howto/24950/how-to-share-a-folder-in-os-x-with-windows/ to share some folders from my Macbook to Windows.
I am now trying to copy some files from my Windows 7 Pro (SP1) computer to my Mac, and have hit the following problems:
I can view my Macbook in my list of local networked computers on WIndows, but I cannot access it. Clicking on it causes Windows 7 to try and access it, but then I get a message after a minute saying the network path could not be found. However, if I manually enter the IP address of my Macbook in the Windows address bar (\\192.168.0.191), I can view and access all the shared folders. I can never access the Macbook via it's computer name (\\MACBOOK-ROB).
I cannot copy some files from Windows to my Macbook shared folders via Windows. There is nothing to distinguish these files from the hundereds of other files that I have successfully copied to my Macbook. They are pictures and music with no special characters in the filenames, not overly long filenames or folder paths, no access restrictions, or any other security restriction that I can see. However, every single attempt to copy these files to my Macbook results in WIndows reporting that access to the destination was denied.
I have tried both these above scenarios on WiFi and Ethernet, and the results are the same.
So:
Why am I unable to access my Macbook by it's computer name on the network? How can Windows see it, but not access it?
What are the limitations on transferring files over SMB that is (presumably) causing these specific files to fail?
Thanks for any help you can offer.

I have a fix for inability to copy files. I had the same problem moving a lot of old files across my LAN from a Windows XP machine to a Mac Mini running Mountain Lion. After confirming copy of some special file, I would get an error that terminated the copy operation, and info on the Mac side would show a locked folder.
I finally decided to eliminate all special files on the Windows side, before copying, by running
attrib -s -h -r /s /d [drive or folder]\*.*
in a command window. Running attrib /? tells what the arguments mean, but it doesn't explain that you need the *.* to make the command go through the hierarchy clearing the special attributes on all the files.
After I did that, and then used drag and drop between two Windows Explorer windows (one on the Windows drive, on on the target drive on the Mac), the whole move operation ran to completion without stopping either for error or to ask for confirmation.
I do not have a fix for the inability to access some computers by name rather than by IP address. I'm looking into the possibility of activating bind on the Mac but I haven't done anything yet.

Similar Messages

Can't copy some files from FileVault Sparsebundle in Time Machine backup

I've got filevault turned on for my mac Mac Mini (10.6.2). I'm using Time Machine to back up to a firewire drive. There's plenty of space - my Mini hd has 250 Gb of 500 used, and I'm backing up to a 750Gb partition on the external drive. The initial backup went OK, and when I logged out it backed up my filevault-protected home directory. When I logged back in, I was able to browse the Backups.backupdb on the external drive, go to the users directory, and open the sparsebundle that was my filevault-protected home directory (after entering the password). I can browse through this backup of my home directory. However, when I try copying files from the backup of the home directory, I get an error:
The Finder can't complete the operation because some data in "(filename)" can't be read or written. (Error code -36).
I get this error for some files, but not all of them. I've tried running BatChmod to reset permissions on all files in my home directory, and then erasing the backup drive and having Time Machine recreate the backup. However I'm still having this problem.
I have also tried restoring the entire hard drive (to a 3rd external HD) by booting from the 10.6 DVD and going through the full-restore process. All of my files are fine when I restore using this method.
Is there something I should do so that I can restore individual files from the backup of my filevault sparsebundle? It is extremly inconvenient to have to do a full hard drive restore if all I want is a file or two, and of course if the motherboard on my mini dies and I can't get a close enough replacement computer, then I could really be up a creek.
Thanks,
John F
New York

feinberj wrote:
I've got filevault turned on for my mac Mac Mini (10.6.2). I'm using Time Machine to back up to a firewire drive. There's plenty of space - my Mini hd has 250 Gb of 500 used, and I'm backing up to a 750Gb partition on the external drive. The initial backup went OK, and when I logged out it backed up my filevault-protected home directory. When I logged back in, I was able to browse the Backups.backupdb on the external drive, go to the users directory, and open the sparsebundle that was my filevault-protected home directory (after entering the password). I can browse through this backup of my home directory. However, when I try copying files from the backup of the home directory, I get an error:
The Finder can't complete the operation because some data in "(filename)" can't be read or written. (Error code -36).
I get this error for some files, but not all of them. I've tried running BatChmod to reset permissions on all files in my home directory, and then erasing the backup drive and having Time Machine recreate the backup. However I'm still having this problem.
I have also tried restoring the entire hard drive (to a 3rd external HD) by booting from the 10.6 DVD and going through the full-restore process. All of my files are fine when I restore using this method.
Is there something I should do so that I can restore individual files from the backup of my filevault sparsebundle?
Don't try to restore files individually by hand using finder. TM backups are protected by very restrictive ACLs and are not designed to be accessed that way.
you can restore the whole sparse bundle with the home directory from TM interface. you should be logged in as a different user when you do this. the easiest is to be logged in as root so as not to deal with any permissions issues.
another thing you might try is doing it from command line instead of finder. this is also not the designed way but might work where finder copy doesn't.
to do this run the following terminal command after you mount the sparse bundle with backups of the home directory
ditto --noacl path/to/source/file /path/to/target/directory
here path/to/source file is the path to the file in the sparse bundle you want to restore and path/to target directory is the path to the folder where you want to copy it to. an easy way to get the path to an item is to drag that item to the terminal window. make sure that you have all the spaces correctly in the command.
It is extremly inconvenient to have to do a full hard drive restore if all I want is a file or two, and of course if the motherboard on my mini dies and I can't get a close enough replacement computer, then I could really be up a creek.
Thanks,
John F
New York

I am new with iMac and I am trying to copy some file from my external HDD but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?

No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.

Copy CSV file from windows to linux

Our oracle is installed on UNIX machine so we have to place CSV file there.
We are on windows.We are using Putty client to access UNIX server.
how to copy CSV file from windows to UNIX server?
Thanks

vis1985 wrote:
Our oracle is installed on UNIX machine so we have to place CSV file there.
We are on windows.We are using Putty client to access UNIX server.
how to copy CSV file from windows to UNIX server?Using scp (secure copy).
It is supported by Putty and ssh services are available by default on most (if not all) modern Unix servers.
Don't have a Windows machine close by, but I recall the scp command is supported by the Putty executable called "+pscp.exe+".
The syntax is very simple:
scp <from_destination> <to_destination>
example (pushing a file from Windows to Oracle Unix server)
scp c:\datafiles\accounts.csv [email protected]:/u01/files/accounts.csv This will prompt for a password.
You also can use ssh trusted certificates (RSA or DSA keys) to automate this. Using Putty you can generate a key pair that consists of a private key and public key.
You copy and paste the public key into the destination server's +$HOME/.ssh/authorized_keys+ file. This results the server in trusting that client and allows the client to connect (using ssh, scp and sftp) without having to supply a password (as the private part of the key serves as authentication). (I would however not use the oracle account for this, but a special scp-copy usage Unix account that does not support shell usage)
If you want to automate it the other way around - have the Unix server pull the file from the Windows client, then you need to install server software on that Windows machine to allow it to provide such a file copy service.
Again I suggest using ssh - OpenSSH is available for a variety of platforms, and Windows should be included. If not, there should be ssh service for Windows from Microsoft or another vendor that can be used.
Any other method than ssh will be either insecure or problematic. FTP is insecure as usernames and passwords are transmitted in clear text. Using Windows File Sharing requires Samba to be loaded and configured on the Unix server - and this is extra work installing and configuring and testing s/w that uses a low level security, that is also proprietary and could required setting on the Windows client also to make it work in a somewhat robust fashion.
The standard today is ssh. It is robust and secure. And it makes a lot of sense to use it.. and pretty good motivation for not using it ifo something else.

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone?

How can I copy mp3 files from my Itunes library to an SD card for use in a non-apple phone? I can physically copy the tunes as mp3's but the phone does not seem to be able to play all of them. Do I need to copy an entire album or can I just pick & choose individual songs? The phone is question is an LG running who knows what for an operating system.

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?

Message title says it: Can you copy/paste files from the Finder to Mail in Lion, or drag them onto the Mail icon in the Dock to create a new message and attach the files to it?
I can't find anything in the Knowledge Base that says these two options no longer work or still do.
I do not have a system capable of running Lion, but I need to know the answer nonetheless.

Gee, I don't know: "paste attachments mail Lion"? ;-)
One further question, if I may: in Panther (which is where I've aggregated nearly 7 years of mail), if you copy more than one file in the Finder, switch to Mail, and paste the files into a new message, only the file names paste in. If you copy one file and paste it into a Mail message, you get the file, not just the name. Is that still true, or has that (IMHO) bug been fixed since 10.3.9?

Can't open PDF files from Windows Explorer on Windows 8.1

Hello,
after I've upgraded to Windows 8.1, I can't open PDF files from Windows Explorer (directly double clicking the file). The AcroRd32.exe runs in the background (2x !) as I see the processes in task manager, but there is no user interface visible. I have Acrobat
Reader 11.0.06, the desktop version (not Metro). I tried uninstalling the Acrobat reader and installing it again but this didn't help. The only way to open PDF files is to close the AcroRd32.exe from the task manager, open empty Acrobat Reader from the desktop
and then drag&drop the PDF file over that window. This is quite inconvenient. Is there a way to fix this issue so I can open PDF files directly from windows explorer?
Many thanks!

I had to install adobe reader, but PDF's used to display just fine with IE, any idea what happened ?
Windows 8.1 pro.
thx
lee

Can't copy and paste from windows to firefox(apple)

I have an apple(mac os x). I have parallels desktop 3.0 for this mac.
Problem: can't copy and paste from windows to firefox.

I have a Mac OS X. I bought software for the Mac.(parallels Desktop 3.0 for Mac) so that I could use Windows on my Mac. I have Firefox browser.
I can not copy anything from Windows and Paste it in Firefox.
But I can copy and paste as long as I am not in Windows.
Ray Chambers [email protected]

Does MacOS recognize Windows directory structure? Can I move an entire folder (consisting of subfolders and files) from Windows to Mac?

Can I move an entire folder (consisting of subfolders and files) from Windows to Mac?

Mustafafromnc,
if you’re talking about a USB drive, then it will probably have an exFAT filesystem. Modern versions of OS X can read from and write to exFAT filesystems without problems, so you would be able to move Windows folders, subfolders, and files from an exFAT filesystem to an OS X filesystem.

TS1402 I can not copy any files from the server & from the Finder. System MAC OS 10.7.5

I can not copy any files from the server & from the Finder. System MAC OS 10.7.5
<Email Edited by Host>

Hi, what is the no boot directory found about???
Can you give details step by step of what you're trying?

Can't copy and paste from windows to firefox

I can not copy and paste from windows to firefox???

I have a Mac OS X. I bought software for the Mac.(parallels Desktop 3.0 for Mac) so that I could use Windows on my Mac. I have Firefox browser.
I can not copy anything from Windows and Paste it in Firefox.
But I can copy and paste as long as I am not in Windows.
Ray Chambers [email protected]

Can't open PDF file from iBook on MAC. error "The application "ACDSee Pro" can't be opened."

Can't open PDF file from iBook on MAC. error "The application “ACDSee Pro” can’t be opened."

Hi arewers,
Do you have Adobe Reader installed, by any chance? If so, are you aware if it was the PPC or Intel version which you installed? In any case, for the time being, have a quick look in 'HD/Library/Internet Plug-ins/' using Finder and see if there's an Adobe plugin lying around. If there is, try moving it out of the folder and restarting Safari.
Yang

How can I transfer garageband file from iPhone to mac?

how can i transfer garageband file from iphone to mac?

usgorkha wrote:
how can i transfer garageband file from iphone to mac?
i think it's the same method as for the iPad:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen)

I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

I can't transfer my files from my Power Mac G5 to my Mac Pro using firewire connections. Has anyone else had this issue?

Don't choose from another Computer, because with the older one in Target mode it really isn't a Computer, just a big Firewire Drive, choose From another Disk...

How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??

You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck!

Can't copy some files from Windows 7 to Mac OSX over network

Similar Messages

Maybe you are looking for