Can't create new virtual machine with Virt-manager

After going through the whole setup, I would get this error through backtrace:
File "/usr/share/virt-manager/virtManager/netlist.py", line 346, in validate_network
netobj.start()
File "/usr/share/virt-manager/virtManager/network.py", line 104, in start
self._backend.create()
File "/usr/lib/python2.7/site-packages/libvirt.py", line 2755, in create
if ret == -1: raise libvirtError ('virNetworkCreate() failed', net=self)
libvirtError: Unable to create bridge virbr0: File exists
Hence, I attempted to follow https://wiki.archlinux.org/index.php/Bridge_with_netctl to set up my network bridge and try again, and I'd still get the same error.
I also tried to do sudo virt-manager but I'd get:
** (virt-manager:16835): WARNING **: Could not open X display
No protocol specified
(virt-manager:16835): Gdk-ERROR **: error: XDG_RUNTIME_DIR not set in the environment.
I want to get KVM working using a gui and so I choice virt-manager, but now I'm stuck and don't know where to go from here.

Hi Sir,
Please follow these troubleshooting steps mentioned within the article below :
http://blogs.technet.com/b/scvmm/archive/2012/08/13/kb-how-to-troubleshoot-the-needs-attention-and-not-responding-host-status-in-system-center-2012-virtual-machine-manager.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Similar Messages

Cannot create guest virtual machine with Solaris 10 SPARC in Oracle VM 2.2

Dear All,
I try many times to create guest virtual machine with Solaris 10 SPARC but not get success.
When I created it already and then I start the Power On button, it run normally but the Console button cannot click on (hide). After that the virtual machine running abit then it change status to Powered Off.
Please kindly give advice for this.
Thanks and regards,
Heng

I storgly doubt, VMware player is available for Solaris 10 SPARC version.
Solaris 10 is not a comercial product, like ubuntu, windows, MAC etc... It's really for a server.
That's the reason still I hate Solaris 11 as a desktop. You have very limited product/software.... This may change for Solaris 11, but U can't expect one for Solaris 10.

Hyper V: No Option to Create New Virtual Machine

After selecting my local computer as the virtualization server, there is no option to create a new virtual machine. When I right-click on my server, I only get "Remove Server", "View>", and "Help"
in the drop-down menu. According to the tutorials that I've watched, this is where "New>Virtual Machine..." should appear. What am I doing wrong?
My machine:
Win 8.1 Pro, 64-bit
Intel Core i5-3470
RAM 8192
Graphics: GTX 660

You need to enable Virtualization under CPU / Advance settings in your BIOS. Your motherboard must support hardware virtualization in order for this feature to be available in the BIOS. If you don't see this option then, your hardware (motherboard)
is not compatible nor support.
Have a look at this http://www.techrepublic.com/blog/windows-and-office/get-started-with-windows-8-client-hyper-v-the-right-way/

Can't create a Virtual Machine on new host - Error (2915)

This error is appearing when a Virtual Machine is created from scratch, or from a template. I've tried all of the recommendations I can find. All updates are in place, VMM reports agents are current, server is "OK". VMM Agent is running. Rebooted
many times.
Error (2915)
The Windows Remote Management (WS-Management) service cannot process the request. The object was not found on the server (xxxxxx).
WinRM: URL: [http://xxxxx:5985], Verb: [GET], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/virtualization/v2/Scvmm_EthernetSwitchPortInternalSettingData?InstanceID=Microsoft:Definition\1f59a509-a6ba-4aba-8504-b29d542d44bb\Default]
Unknown error (0x80338000)
Recommended Action
Ensure that the VMM agent is installed and running. If the error persists, restart the virtualization server (xxxxx) and then try the operation again.
This error can also happen due to an older version of the VMM agent on the virtualization server. Ensure that the VMM agent is upgraded to the latest version, and then try the operation again.

Hi Sir,
Please follow these troubleshooting steps mentioned within the article below :
http://blogs.technet.com/b/scvmm/archive/2012/08/13/kb-how-to-troubleshoot-the-needs-attention-and-not-responding-host-status-in-system-center-2012-virtual-machine-manager.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Could not create virtual machine in virt-manager with kvm

I installed the following packages:
libvirt 0.6.1-1 (modified PKGBUILD from AUR)
kvm 84-1
qemu 0.10.0-1
virtinst 0.400.3-1 (modified PKGBUILD from AUR)
virtviewer 0.0.3-2
virt-manager 0.7.0-1(modified PKGBUILD from AUR)
And my current user belongs to the following groups:
disk lp audio optical storage power locate hal camera kvm libvirt tinh
Here is a part of my rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e100 mii iwl3945 kvm kvm-intel)
DAEMONS=(syslog-ng @hal @network @dnsmasq @oss @cups @fuse @libvirtd !netfs !crond)
List of loaded kernel modules:
modprobe -l | grep kvm
/lib/modules/2.6.28-ARCH/kernel/arch/x86/kvm/kvm.ko
/lib/modules/2.6.28-ARCH/kernel/arch/x86/kvm/kvm-amd.ko
/lib/modules/2.6.28-ARCH/kernel/arch/x86/kvm/kvm-intel.ko
My CPU does support Intel VT.
[tinh@tinh-laptop ~]$ egrep '^flags.*(vmx|svm)' /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor vmx est tm2 xtpr pdcm
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor vmx est tm2 xtpr pdcm
[tinh@tinh-laptop ~]$
My kernel version is:
uname -a
Linux tinh-laptop 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 Genuine Intel(R) CPU T2400 @ 1.83GHz GenuineIntel GNU/Linux
I also attached a screenshot of virt-manager.
Any helps are welcomed.
Thanks
Last edited by tinhtruong (2009-03-10 08:10:50)

Maybe the command line shows some errors.Try something like
/usr/bin/kvm -M pc -monitor pty -boot d -hda /dev/vg01/opsi -cdrom /root/debian-500-i386-netinst.iso -net nic,macaddr=00:16:3e:49:da:10,vlan=0 -net tap,script=,vlan=0,ifname=vnet0 -serial pty -parallel none -usb -vnc :0
-hda is where you want to install the machine. Here it's a logical volume, but you can also use an image.
-cdrom is the installation medium
you can probably omit -vnc :0. I used it because I install machines on servers without gui.

Virtual PC - Create new virtual machine snap in button not appearing

I was asked to move this question here so here it goes...
I have installed virtual PC and have the XP mode image working on Win 7 64 bit on a Dell Optiplex 990 i5. However when I choose the Windows Virtual PC manager and the Windows explorer window opens, I don't see the create virtual machine option, just
'burn' where it should be. How do I get the snap in option to appear to create a virtual drive? The window appears with the title Virtual Machines.
I have tried enabling the windows 7 aero UI thinking the classic windows appearance was somehow blocking this but that had no effect.
I tried re-installing the virtual pc setup directly from the website but it give me the message that it's isn't suitable for use. I tried un-installed and re-installing but get the same where the explorer window is missing the snap in.
Again, the XP mode image works properly and starts and shuts down without any issues.

Below is the fix for the virtual machines folder for WinVPC when the folder
here “%username%virtual machines” is missing the
“Create Virtual Machine” option.
Making changes to the Registry is potentially dangerous, always have a backup before proceeding.
The fix is pretty simple, copy and paste the following lines into notepad and save
to a *.reg file, then double-click to run it (you shouldn’t need to reboot for
the fix to take effect, close and re-open the window:
Windows Registry Editor Version 5.00
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\BagMRU]
[-HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Bags]
[-HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\BagMRU]
[-HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\Bags]
[-HKEY_CURRENT_USER\Software\Classes\Local
Settings\Software\Microsoft\Windows\Shell\BagMRU]
[-HKEY_CURRENT_USER\Software\Classes\Local
Settings\Software\Microsoft\Windows\Shell\Bags]

I can't create new virtual audio device

Dear All,
I've two audio devices and I would create a virtual audio device with the input channels of both of them. I'v read that it's very simple. But when I click on the "+" button in the "Audio/Midi Configuration" application I'm not able to create a new virtual device. Both of real devices work perfectly.
My account is a system administrator.
Help me, please!

Great! It was hard, but now all work fine!
I removed these two files:
"Macintosh HD/Library/Preferences/com.apple.audio.AggregateDevices.plist"
"Macintosh HD/Users/YourUserName/Library/ Preferences/com.apple.audio.AudioMIDISetup.plist"
... the truth lies in small things!

Can not create newer OpenGL contexts with bumblebee

I have an Asus UX32VD with an Nvidia 620M. I am using bumblebee with virtualgl.
optirun glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 620M/PCIe/SSE2
OpenGL core profile version string: 4.3.0 NVIDIA 325.15
OpenGL core profile shading language version string: 4.30 NVIDIA via Cg compiler
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.3.0 NVIDIA 325.15
OpenGL shading language version string: 4.30 NVIDIA via Cg compiler
OpenGL context flags: (none)
OpenGL profile mask: (none)
OpenGL extensions:
for example if I try to create a 3.0+ context in GLFW I always get
$optirun ./gltestrust
libGL error: failed to load driver: swrast
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
$LIBGL_DEBUG=verbose optirun ./gltestrust
libGL: screen 0 does not appear to be DRI2 capable
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: Can't open configuration file /home/maik/.drirc: No such file or directory.
libGL error: failed to load driver: swrast
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/i965_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/i965_dri.so
libGL: Can't open configuration file /home/maik/.drirc: No such file or directory.
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
I think swrast is a fall back mechanism because my GPU can't create the correct context.
Any help is appreciated.

Sorry for not updating the status of this question. I have solved this issue.
This was due to use of jsp:include tag. I really don't know the exact problems with the use of jsp:include on WLS 10.3. It works well on WLS 8.1.
However, I solved this by copying the content of my include page on jsp:include tag into the main page itself.
Thanks

Create new virtual machine in Oracle VM 3.1.1

Hello,
after upgrade to 3.1.1 there is no possibility of create a new server and clone machines because of this error:
No such object (level 1): 5232
Unable to download an iso for repository.
What could be cause of this behavior Oracle VM?
Thanks

user12875387 wrote:
hda:driver not ready for command
BUG: soft lockup -CPU#0 stuck for 108s!Sounds like something bad is happening on your server, but there is not enough information to determine what it is. If you have Oracle Support, I would recommend opening an SR. Otherwise, try rebooting the server itself.

Creating new VM ends with Error code 3430 and 3040 in Hyper-V log. Does anyone have any insight into what might cause this?

The new VM is being created via a P2V process run from SCVVM. It reaches a completion of 60% and dies. I asked about this in another question detail of the VVM can be seen at this link:
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemgrp2vv2v/thread/71aae7dc-13b5-46f1-b794-cc1b8085541f
Running Win2008 R2 w/ Hyper-V role enabled & SCVVM 2008R2
In any event I checked the Hyper-V logs to see if they might shead any light on the problem and there were two error messages associated with the attempted conversion. The first Event ID 3430
Log Name:      Microsoft-Windows-Hyper-V-Worker-Admin
Source:        Microsoft-Windows-Hyper-V-Worker
Date:          5/23/2011 4:51:25 PM
Event ID:      3430
Task Category: None
Level:         Error
Keywords:
User:          NETWORK SERVICE
Computer:      Virtual-Mgt.amrinc-corp.local
Description:
'test1' failed to set/change partition property: The system cannot find message text for message number 0xtest1 in the message file for 18568CA2-82E9-4A9F-B462-701D8FB4C447. '0x8007013D'.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
    <EventID>3430</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="3316" ThreadID="2716" />
    <Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
    <Computer>Virtual-Mgt.amrinc-corp.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <VmName>test1</VmName>
      <VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
      <ErrorCodeString>%%2147942717</ErrorCodeString>
      <ErrorCode>0x8007013D</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
And the second Event ID 3040
Log Name:      Microsoft-Windows-Hyper-V-Worker-Admin
Source:        Microsoft-Windows-Hyper-V-Worker
Date:          5/23/2011 4:51:25 PM
Event ID:      3040
Task Category: None
Level:         Error
Keywords:
User:          NETWORK SERVICE
Computer:      Virtual-Mgt.amrinc-corp.local
Description:
'test1' could not initialize. (Virtual machine ID 18568CA2-82E9-4A9F-B462-701D8FB4C447)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-Worker" Guid="{51DDFA29-D5C8-4803-BE4B-2ECB715570FE}" />
    <EventID>3040</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2011-05-23T21:51:25.956775200Z" />
    <EventRecordID>2</EventRecordID>
    <Correlation />
    <Execution ProcessID="3316" ThreadID="2716" />
    <Channel>Microsoft-Windows-Hyper-V-Worker-Admin</Channel>
    <Computer>Virtual-Mgt.amrinc-corp.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<UserData>
    <VmInitialize xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <VmName>test1</VmName>
      <VmId>18568CA2-82E9-4A9F-B462-701D8FB4C447</VmId>
    </VmInitialize>
</UserData>
</Event>
I have blownout the server and reinstalled the operating system and SCVVM and applied all the current updates to no avail. I have the exact same issue again. The problem seem to be at least on the serface an authority problem because I have no problem creating
new VM via the P2V process on an old Virtual Server running on Win2003R2.
Oh yes I can create new virtual machines on the system in question and move them to the library as was suggested to verify in a Blog post so I am really wondering what the problem is?
Configuration Analyzer Just gave me a warning about reporting not being setup on the VVM which it isn't so no suprise there?
Any information that might help me figure this would be greatly appreciated

I've looked at both threads, and there simply isn't enough information for me to tell you what is wrong. Please collect a trace (instructions in General forum) and open a case with CSS. CSS can provide more in depth analysis than what a forum
post allows.
As a shot in the dark, I have seen the issue outlined in the following KB article cause this exact same error message and symptom,
http://support.microsoft.com/kb/967902
Best Regards, Mike Briggs [MSFT] -- posting provided "AS IS" with no warranties and confers no rights

Create a virtual machine of OS X

Hi! I need some help. I'm trying to create a virtual machine with OS X Yosemite installed. I have my macbook and I download an original version of OS X Yosemite from the app store. Now I want to install this OS on a virtual machine (using for example VirtualBox "www.virtualbox.org" because is the virtual machine software that I use) for try some things, install some apps, do a internal network with other machines and try some configurations, but I don't want to break my macbook (reinstall the OS is so boring). Can you give me some instructions or any manual to do this.
Thank you very much!

Boot Camp is not a Virtualization scheme -- it is only a set of drivers for the Mac-specific Hardware so that Windows can run nativley.
I think you should be asking VMWare whether you can run that VMWare program on a Mac, and how to install it. That is where you will need to turn for support if you run into problems.

Register Virtual Machine in OVM manager

I have created a virtual machine on server manually by copying system.img and configuring vm.cfg file. How can I register this machine with OVM manager?
Thanks.

javed555 wrote:
I upgraded OVM manager to 2.2 and having problems after that. If I try to create a virtual machine using OVM manager, it gives ma errors like File "/opt/ovs-agent-2.3/OVSXUtility.py", line 167, in get_storage_repos raise Exception("No storage repository found!")What version are your Oracle VM Servers? If they are 2.2 (or higher), run */opt/ovs-agent-latest/utils/repos.py -l* and make sure your storage repository is listed. If it is not listed, use the documentation to add the repository and initialize it. That will then make it available and visible to the pool (and thus Oracle VM Manager).

Create Hyper-V Virtual Machines with Windows PowerShell searching on hostname

Dear,
I’m a starter with PowerShell scripting an I’m looking for a script to create Hyper-V Virtual Machines with Windows PowerShell. The idea behind the script is that when I run the script its first searching for the hostname. I’m migrating 24 locations and each
location have a different hostname like xxx-SRV001. The script needs to use the first 3 signs from the hostname in this case “xxx” and create 2 VM's with below info:
Virtual Machine 1 2048MB
Virtual Machine 2 4096MB
Location D:\VM\
I can create VM's with Powershell into Hyper-V so only a script to first searching for the first 3 characters of the hostname is enough.
Example:
It's the intention that when the script runs it's looking for the hostname. As example we have hostname 000-SRV001
If the script see the first 3 characters of the hostname, in this case 000 he need to create 2 VMs with name xxx-SRV002 and xxx-SRV004
I think it must be something with
$hostname = "Get-WmiObject -computername $Machine Win32_Computersystem"
But then when i'm asking for $hostname he must give me back the hostname and if the hostname is 1 of the 24 locations then he need to create 2 vm's in Hyper-V with above info.
Can you help me or do you have a script for this?

Juste use :
$vram = 1GB*$vRam
You not need the "
Do you have any error with the creation of the VM?
# Variables
$VMName = Import-Csv "C:\HyperV\input.csv"
$VHD = 40GB
$VMLOC = "C:\HyperV"
$vSwitch = "External"
$ISO = "C:\ISO\WinServer2012R2.iso"
$LocationCode = $env:COMPUTERNAME.Split("-")[0]
# Create VM Folder
MD $VMLOC -ErrorAction SilentlyContinue
Foreach ($VM in $VMNames)
$Name = $VM.name
[int64]$vRam = $vm.vram
$vram = 1GB*$vRam
$VMName = $LocationCode+$Name
# Create Virtual Machine
New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VMLOC\$VMName\Virtual Harddisks\$VMName.vhdx" -NewVHDSizeBytes $VHD -SwitchName $vSwitch
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
# Configure Virtual Machines
Set-VMDvdDrive -VMName $VMName -Path $ISO
Start-VM $VMName
Error message
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID 8F5F32D7-F1A0-4A68-8B01-CA6661869A1E)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
New-VM : '003' failed to modify device 'Memory'. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
Invalid startup memory amount assigned for '003'. The minimum amount of memory you can assign to this virtual machine is '32' MB. (Virtual machine ID C0FC835E-36D4-462E-BD21-69A75A808E2F)
A parameter that is not valid was passed to the operation.
At line:20 char:5
+ New-VM -Name $VMName -Path $VMLOC -MemoryStartupBytes $vRam -NewVHDPath "$VM ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [New-VM], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.NewVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:23 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:24 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand
Set-VMDvdDrive : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:27 char:5
+ Set-VMDvdDrive -VMName $VMName -Path $ISO
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Set-VMDvdDrive], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVMDvdDriveCommand
Start-VM : A parameter is invalid. Hyper-V was unable to find a virtual machine with name 003.
At line:28 char:5
+ Start-VM $VMName
+ ~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (003:String) [Start-VM], VirtualizationInvalidArgumentException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.StartVMCommand

HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918

How to create a notification for new virtual machines created on Hyper-v Using SCOM or another way?

Hi ,
We need to to create a notification for new virtual machines created on Hyper-v Using SCOM or another way
thanks

http://sincealtair.blogspot.com/2010/04/how-to-ask-questions-in-technical-forum.html
Not nearly enough information.
If you are asking about SCOM, it is better to ask in the SCOM forum -
http://social.technet.microsoft.com/Forums/en-US/home?forum=operationsmanagergeneral
.:|:.:|:. tim

Can't create new virtual machine with Virt-manager

Similar Messages

Maybe you are looking for