Can't create semantic network

Help please.
I'm trying to study Oracle RDF support in 11g. But when I'm doing
execute SEM_APIS.CREATE_SEM_NETWORK('rdf_tblspace');
I get the following error:
BEGIN SEM_APIS.CREATE_SEM_NETWORK('rdf_tblspace'); END;
ERROR at line 1:
ORA-13199: Error during RDF Network creation: step_num=5 SQLERRM=ORA-01450:
maximum key length (6398) exceeded
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 17
ORA-06512: at "MDSYS.SDO_RDF_INTERNAL", line 5307
ORA-06512: at "MDSYS.SDO_RDF", line 910
ORA-06512: at "MDSYS.SDO_RDF", line 926
ORA-06512: at "MDSYS.RDF_APIS", line 715
ORA-06512: at line 1

This is a known problem with some character sets. The patch available for 11g at http://www.oracle.com/technology/tech/semantic_technologies/index.html (follow link to 'Software') should take care of this.
Melli

Similar Messages

Wifi Bug - Can't create a network

Installed Snow leopard, upgrade to 10.6.2, Airport client 2009-002.
Can't create a network thru airport menu

Try a new post in the 10.6 Networking forum.
DALE

Can I create a network for printing & music alone ?

I don't have DSL or any type of broadband - still using dial up.
If I buy an Airport Express can I configure it to wirelessly print and stream music or do I need a wireless network in the background to make this work ?

Can I create a network for printing & music alone ?
Yes
If you also want internet access at the same time you will need to tweak things a bit.

Can't create Local Network Users in Yosemite

I can't create Local Network Users (or change passwords)
Logged on to /LDAPv3/127.0.0.1 as directory administrator
When I try to create a new user (press the [+], fill in the form), it brings up the message:
existing connection is not authenticated or secure: password change denied
I suspect this is emblematic of other issues. I can authenticate for Mail and SMB, but not for AFP or Xcode

So I had this problem last night as well when I upgraded my 10.9.5 OD master to 10.10.
Two obvious problems after that upgrade:
1) Could not add a new Local Network User
2) Existing users could not connect via AFP (but could via SMB)
Through a series of trial and error (and with two Apple Support people...), we found that the following actions seemed to help fix some (but not all) of the problems.:
Problem #2 seemed to initially be fixed by archiving the OD Master, destroying the OD Master and then reimporting from the archive. I archived from the upgraded 10.10, but should probably have tried restoring my 10.9.5 archive (which may end up being why I still have some problems...)
Problem #1 seemed to be solved when I used WorkGroup Manager to reset the password on the Directory Administrator account I use (I also blew out all references to that account from the Keychain, so everything reprompted me to add that password
However, we think the root cause of this might have been that in /var/db/openldap/migration, the following "dot" files were still present after the upgrade
fs:migration root# ls -la
total 6308816
drwx------ 10 root wheel         340 Oct 30 18:59 .
drwxr-xr-x   6 root wheel         204 Oct 30 18:57 ..
-rw-------   1 root wheel           0 Oct 30 18:59 .autossl
-rw-------   1 root wheel           0 Oct 30 18:59 .enableODProxyd
-rw-------   1 root wheel           0 Oct 30 18:59 .rekerberize
-rw-------   1 root wheel           0 Oct 30 18:59 .updateLocales
-rw-r--r--   1 root wheel      333436 Oct 30 18:57 authbackup.ldif
-rw-r--r--@ 1 root wheel      617453 Oct 30 18:57 backup.ldif
-rw-r--r--   1 root wheel      617453 Oct 30 18:57 backup.ldif.backup
-rw-r--r--   1 root wheel 3228537344 Oct 30 18:59 oldsystem.tar
Those 4 .dot files were *not* present in that directory on the two other test OD Master servers that I upgraded without issue.
So we removed them and after having done all the above as well -- I can now add users to the server.   The OD engineer I talked to thought that the presence of those .dot files may have been triggering something to rerun every time PasswordService launched.
When all was said and done, I was then able to "kinit <mydiradminaccount>" correctly and get a "klist" without issue.
ALL THAT SAID: As of this morning, *some* (most? I don't know yet) of my existing OD user accounts are able to successfully log into the server.   A couple of them (so far) are reporting that their account is "disabled" (which is different from the "shaking"/can't-log-in behavior) -- but they can still log in via SMB -- so I think there was still a problem migrating OD accounts in the upgrade process.
AND -- I noticed that -- in Server 4.0 -- "change password" is greyed out, so I have to use WorkGroup Manager to change server account passwords.
Whee...

Windows can't create a network map/appearance of B...

Hi
I have had BT infinity for somewhat over a month now without any problems, until yesterday. That I am aware of two things have changed but in what order they changed I do not know.
'Firstly' I connected a brand new but several years old i.e. unused, LG 1T network drive and tried to get through the software installation process without success (can't create acceptable login details ). However I could see etc. the drive if I typed its network address into a browser's address window. BUT at that point the Windows network map started breaking. That was yesterday and I have, for the moment, removed the drive and deleted its info from the Homehub 5b.
Today I noticed that two new wireless networks have appeared, BTWifi-X and BTWifi-with-Fon. These appear and disappear as and when my homehub is switched on and off and, given what I have read, I assume these are the hotspot networks I am providing.
If I have my laptop connected to the homehub via LAN, Windows can create a network map providing no other computer is connected via WAN. Conversely when any computer is simultaneously connected to the homehub via WAN Windows loses the ability to create a network map, this includes the situation where one computer is connected via WAN and LAN. I often use my employer's WAN when at work and frequently forget to switch the WAN off, meaning that when I come home the laptop is initially often connected via WAN and LAN. That I am aware of, Windows has not previously had a problem creating a network map when this has happened.
There does not seem to be a problem if my phone (android) is connected to the homehub via WAN or if I have two computers connected to the homehub via only WAN nor if two computers are connected to the home hub via only LAN
One other thing I have also noticed is that the network map, when created, seems to contain, at times, a switch, a hub, Homehub5 and BThub5**** as if there a multitude of connectors.
I would like to get back the ability for windows to create network maps whatever connections are made.
Any suggestions?
Thanks

Claybourne wrote:
Hi
I have had BT infinity for somewhat over a month now without any problems, until yesterday.
That I am aware of two things have changed but in what order they changed I do not know.
'Firstly' I connected a brand new but several years old i.e. unused, LG 1T network drive and tried to get through the software installation process without success (can't create acceptable login details ). However I could see etc. the drive if I typed its network address into a browser's address window. BUT at that point the Windows network map started breaking. That was yesterday and I have, for the moment, removed the drive and deleted its info from the Homehub 5b.
Today I noticed that two new wireless networks have appeared, BTWifi-X and BTWifi-with-Fon. These appear and disappear as and when my homehub is switched on and off and, given what I have read, I assume these are the hotspot networks I am providing.
If I have my laptop connected to the homehub via LAN, Windows can create a network map providing no other computer is connected via WAN. Conversely when any computer is simultaneously connected to the homehub via WAN Windows loses the ability to create a network map, this includes the situation where one computer is connected via WAN and LAN.
I often use my employer's WAN when at work and frequently forget to switch the WAN off, meaning that when I come home the laptop is initially often connected via WAN and LAN. That I am aware of, Windows has not previously had a problem creating a network map when this has happened.
There does not seem to be a problem if my phone (android) is connected to the homehub via WAN or if I have two computers connected to the homehub via only WAN nor if two computers are connected to the home hub via only LAN
One other thing I have also noticed is that the network map, when created, seems to contain, at times, a switch, a hub, Homehub5 and BThub5**** as if there a multitude of connectors.
I would like to get back the ability for windows to create network maps whatever connections are made.
Any suggestions?
Thanks
You seem to be using WAN to mean a Wireless connection when it means something else. Is this correct.
Your HH 5 B should provide a better network map than windows. Do you know how to log into your Home Hub Manager to get this and other information ?
Have you set up your HH 5 B as recommended in this forum ?

Can I create a network object from CIDR format or do I need to use IP - netmask?

Have a cisco ASA running ASA V 8.3
Wondering what the correct syntax is or even if it is possible to create a network object from a list of IP's in CIDR format?
Typically just do this:
Create network-object
object-group network name
network-object 1.2.3.0 255.255.255.0
Would like to do this:
network-object 1.2.3.0/24
thanks!

Hi,
As far as I know the ASA does not support entering a network/subnet mask in such format in any of its configurations.
- Jouni

Airport has stopped working -- Now Can't Create a Network

We're using a wireless router (not an Apple AirPort router) to connect to the internet. We've had connections before, but now this has simply stopped working.
In the past, I've solved this problem by just creating a new network and connecting to that. That seemed to get the connection back.
Now, I create a network in Preferences > Network > Airport, but it doesn't show up in Internet Connect > Airport, or under the Airport in the menu bar.
When I try to connect to it using "Other" I get the message "There was an error connecting to the network XXXXX".
When I click on "Create Network" in Internet connect, it only gives me an option to create a computer-to-computer network.
Ethernet connection works fine. This is on a PB 12" / 10.4.11
Any suggestions most welcome.

Reset the printer back to Factory Defaults and check the wireless radio again. It needs to be enabled.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can I create a network where the Time Capsule gets its internet connection from my iMac?

Hi,
I've recently bought a Time Capsulebut I'm having some problems with it on my university network. It is an Eduroam network, so each computer has to authenticate before it can get an Internet connection – I can't use the Time Capsule normally as it is unable to authenticate to the network. However, I'd like to be able to create a smaller network in my room (with my computer and iDevices on so that I can use Remote and stuff, as well as to potentially get my Xbox and Kindle,which can't connect either, online).
Last time I did this, I had my iMac create an internet connection which it shared with everything else. (This was before I had the Time Capsule.) One way of solving it seems like it might be to share the Wifi internet connection with the Time Capsule through the ethernet, and then the Time Capsule can share the interent to everything else. Would this be possible? Or can you think of any other way that this could be done?
In other terms, I have an iMac, a Time Capsule, an iPhone and iPad, a Kindle and an Xbox. Only the iMac can connect to the internet and I'd like them all to be able to, as well as being on the same network. Is this possible?
Thanks!

DropBox is another possibility for sharing files and it is free for the first 2GB of storage.
Lou Picinich
Member Apple Developers Network
Certified Member Apple Consultants Network
ACSP 10.5 → 10.7, ACTC 10.5 → 10.7
ACS Security & Mobility 10.6
Mobility Technical Competency
[email protected]
www.SystemXperts.com
(623) 512-8992

Can't share my Internet connection - Can't create Wifi network

Hi!
I'm struggling to get my Mac Mini A1176 with 10.7 to create a Wifi hotspot. When I try, either through Internet Sharing or by manually choosing create network, it says "can't connect", and fails to create the hotspot.
The only strange thing I can find, is that when I get the screen where I can choose network name, channel and security, channel is blank. I can't choose channel, the only option is the sign: -
Anyone else seen this? Doesn't the A1176 support Adhoc networks?

It's actually even easier than that....
I never had to create an adhoc network.
Look Here

Hyper-V can't create a network switch in Windows 8 enterprise evaluation

Hello
I have a problem with creating a new virtual network switch in windows 8.
it's the error:
[Window Title]
Virtual Switch Manager for HYPER-VISOR
[Main Instruction]
Error applying Virtual Switch Properties changes
[Content]
Failed while creating virtual Ethernet switch.
[Close]

Hi,
If you are using Wireless network adapters.
Virtual switches can only be created that are bound to wired NIC's
Best regards,

Can ATV "create" WiFi network

Gents
I'm thinking of getting an ATV and I'm wondering if it is capable of creating a WiFi network? Currently my modem plugs into an AX (via ethernet switch) which creates my home WiFi. The AX has optical out to AV receiver. As I effectively won't need the AX for audio duties, can I drop it altogether and use ATV as my Wifi hub?

the appletv is not a router/hub or wifi extender.
it is a client device and requires you to connect it to your existing network.

Can I create a network using a DSL Gateway with iPad

My brother and I purchased an iPad for our mum. She can see next doors Netgear WiFi but unfortunately they do not know the the security number to give mum access.
So we were wondering if there is a way of creating a new network using an old wireless router we have that is spare?
Mum doesn't have a PC so we cannot set one up that way. Is there anyway that the router could be set up using the iPad itself?
Presumably you have to have something hardwired to the router to make the settings?
Basically can I configure/troubleshoot the modem/router using just the iPad? I know some configurations are accessed through just a web browser, and I wasn't sure if the iPad Safari would support that.
And what if somebody was setting up a modem from scratch?
Would they be able to do everything from the iPad?

As I mentioned before, you'd have to consult the manual for your WiFi router to see if it can be configured without a wired connection initially. You haven't said what router it is so it's impossible to advise further.
It would be easier to set it up initially on a laptop though, and once setup, you should be able to use the iPad to access the web interface to change settings. I often access the web interface of my D-Link router to change settings and even reboot the router when necessary.
The iPad is designed not to be used as a standalone device, but to be used in conjunction with a computer. Without a computer, your Mum will not be able to sync it, back it up, install updates, transfer files, restore it or fix problems that may occur.

How do I create Local Network Home Folders for Users from an Active Directory binding?

My situation is this... I run an iMac lab at my school. I have a server set up to manage the network user accounts in the lab. Currently, I can sucessfully create Local Network Users and log in to them from any of the iMacs. My school has an Active Directory set up for all the students on campus. What I'd like to be able to do is configure the server to allow the students to use their user names and passwords from their school accounts to log in to the iMacs and have it automatically build a network user folder on the server for them to use during the lab.
So far, I have been able to configure access for the Active Directory accounts to use the services on the server, mainly File Sharing, but I cannot figure out how to allow them to log into a user account on the client's machines using their same Active Directory credentials. I have even attempted to allow the user accounts to create mobile accounts, but that's not working out either. Entering indivual network user accounts into the server for every student every semester will be a nightmare. I'm sure there's a way to do it automatically using the exisitng Active Directory structure.
The live server is running 10.8.5 Server still, but I've also got a clone running OS X Server in case it matters. Please help!

ok reinstalled everything dns seems to be working have done sudo changeip -checkhostname and it says that both names match but then i started open directory and can't seem to get Kerberos started, i've tried changing it to stand alone then back again but it does nothing. I'm wondering why this would happen? i've tried adding a kerberos record but it doesn't do it just does nothing so i don't know what i'm doing wrong. I wondered if it might be a problem with the two network cards and dns as on ethernet one it is getting the dns name xserve.xxxx.ac.uk (which matches what the college server wants to call us) but on ethernet 2 gets xserve-2.local because it tells me that it already exists on ethernet one and renames it to this. I need to set up NAT so have ethernet coming in on port one and out again on port two. I wonder if my dns is backwards as its got the 192. address the NAT uses but its linked to the ethernet port one dns maybe this is the problem. would this cause open directory not to start kerberos?

How I create guest network in AirPort Extreme )

I found only my primer network
How can I create guess network?

In order to enable the Guest Network feature, you must use a simple modem with the AirPort Extreme.
To verify, post back with the make and model number of what you might call your "modem"

Can I create a wi-fi network on my macbook and still connect to the internet via an actual wifi point?

Hi,
I got TrakProDJ from the app store and installed it.
It allows me to control a DJing software with my iPad by setting up a network via Wifi Symbol in Toolbar>Create Network...
The problem with this is the network I create isn't based in the internet--it's just a wifi link between my laptop and iPad.
I'm sure I'll get asked to play songs I'll have to look up on youtube, so how is it possible that I can maintain my wifi network connection on my macbook and create an access point for my iPad to use to communicate with my laptop (to control the DJing software)?
I'll really appreciate any help I can get!
Thank you!

You cannot use both an ad-hoc network and a normal ap based one with any wireless device. Your only solution is to use a wired Internet connection to do so on the laptop, that way you use that for Internet access and your wifi for the ad-hoc network the app requires. You might want to contact the developer of that app and find out why they limit the setup to just an ad-hoc wifi setup. Seems that if all it requires is just a network connection to the laptop, they could simply use any existing network connection as long as both devices can see each other on it. Either that or also give the user the option to use Bluetooth for it if they have the higher version of hardware to support the necessary data exchange.

Can't create semantic network

Similar Messages

Maybe you are looking for