Can't Enable Disk Use

I have tried changing my iPod options to Enable Disk Use, but whenever I go back to see the options it remains unchecked and my ipod drive won't show up in windows explorer.
Do I have a faulty iPod?. Also I have noticed that if I disable Art Work it still keeps showing album covers when I play music on my ipod, and when I go back to the options again it keeps the Art Work checkbox checked.
I have even restored my iPod see if that would do the trick but it's helpless. Can someone please help me out?

Duh. Pressing the "Apply" button at the bottom right corner of the iTunes window likely would have done the trick too.

Similar Messages

  • All music gone, transferred to 'other', can't enable disk use on iTunes

    it seems like there are a lot of people with similar problems but nothing exact..here goes:
    -doing research on my macbook and i get a popup from itunes saying that my ipod was disconnected improperly (i didn't touch it and i wasn't even messing around on itunes)
    -ipod restarts and reconnects with itunes and i get another pop up saying that "itunes cannot read the contents of the ipod. go to ipod summery and preferences and restore.
    -i would just restore it and reload all the music butttttt like an idiot..i dont keep my music in my itunes cause it takes up way too much space and i never used any external hard drive or anything to back my music up (again..idiot..i know)
    -so i read though a ton of forums and posts and see that im not the only one that this has happened to and everyone is saying to put it in disc mode, go to removable disk, copy all the music back to my macbook, restore my ipod, and put all the music back on. i also read something about clicking on my ipod icon on my desktop and going under ipod controls and changing some names (i dont konw if that was jsut for windows or what) but i also dont have an option of ipod controls
    -the problem with that is that i can put my ipod into disk mode but that does me no good because i can't enable disk use on itunes because literally..my only option when i plug in my ipod is to restore it. under devices on the left hand menu, it just says ipod..not ipod with a bunch of sub categories like music and playlists and stuff..just ipod.
    -normally..i would just give up and restore it but when i go to the about section on my actual ipod, it says that i have 50GB of "other" so that means that stuff is definitely still on it.
    -so finally..my main question is:
    is there ANY way to enable disk use on my iTunes without doing it through my iPod?..like i explained..when i plug my iPod in..that is not an option. and also..would i benefit from just bringing my laptop and ipod into an apple store and asking for help there or will that just be a waste of time?

    The library on the iPod will have been damaged - hence the reason it appears empty, but the media files are still there taking up space and reported as "Other". Check out this post from Zevoneer for some iPod recovery options.
    http://discussions.apple.com/thread.jspa?messageID=6273675&#6273675
    Some of the tools mentioned will require a working library, but I know from experience that you can use the manual recovey method when the library is missing or damaged. If you're struggling for space you probably need to go & buy an external drive before you start. Stick the iPod in disk mode. Hold Menu+Select > 6 seconds (resets iPod) followed immediately by hold Previous & Select > 6 seconds. You can now drag the contents of iPod_Control\Music to your new hard drive. You may need to reveal hidden files & folders. Once they are on your hard drive you can create a new empty library on the drive, then import the files you have reovered and consolidate the imported library so that the files are in a standard artist\album\## track structure rather that the iPod's obscured names.
    tt2

  • Can't enable disk use for restored shuffle

    My shuffle stopped playing music in March. I continued using it as a removable disk. I tried the restore utility and it worked - now my shuffle plays music again. However the latest iTunes (7.0.1 and 7.0.2) has no checkbox to enable disk use for when the Shuffle is connected. The checkbox is there for a 5G iPod but not for the Shuffle.
    So - now it works as an iPod but no longer works as a disk. What is going on here? How can I enable disk use?

    iTunes 7.0.2 is still displaying that checkbox for both of our local Shuffles.
    Perhaps you just need to scroll down to find it. If it's actually not there then I'd have to think that this is an iTunes question, not an iPod one, and might be better placed in those forums.

  • Can't enable disk use on Ipod

    I've recently upgraded my Ipod software to 3.1 and Itunes to 6. I've followed the tutorial to make the Ipod be a hard drive and when I click on Ipod in Itunes and go down to the Ipod icon in the lower right corner and click on that, it does NOT look like the screen on the tutorial and on the screen that I see, "enable disk use" is greyed out. I'm trying to troubleshoot why my synching contacts has allowed duplicates as well as loading in emails, which I don't want. But first I need to figure out why I can't enable disk use.

    I can relate...sort of! My iTunes doesn't even HAVE that option. Can you believe it??? It's a brand new (although outdated) 40gb HP iPod, and I'm running HP version of iTunes 6. The manual says how I should enable (configure) the iTunes for use as hard disk--but it failed to tell me that no freaking icon would appear in that little corner. FRUSTRATED
    Sigh.

  • Can not "Enable disk use" on second computer

    We have two computers. One was our main system (and had all my downloaded music) and a newer laptop with nothing but loaded CD's.
    I am now attempting to transfer everything onto my laptop, (This is my primary computer.) but when I select "Options" the "Enable Disk Use" is checked but greyed out and can not be accessed.
    Everything else works fine. The outlook syncs up and I can organize music. I just can't utilize the disk.
    Any advise?
      Windows XP Pro  

    I can relate...sort of! My iTunes doesn't even HAVE that option. Can you believe it??? It's a brand new (although outdated) 40gb HP iPod, and I'm running HP version of iTunes 6. The manual says how I should enable (configure) the iTunes for use as hard disk--but it failed to tell me that no freaking icon would appear in that little corner. FRUSTRATED
    Sigh.

  • Can't Enable Disk Use in 2G Shuffle

    On a Mac OS X that I had to restore previously. Music, but not playlists, were recovered. Haven't synced shuffle since and am trying now.
    Getting the message that this iPod is synced with another iTunes library and asks to ignore or erase and sync with this library. I would prefer to create a new playlist and transfer from the shuffle since it is a compilation that was not preserved but from what I am reading I need to enable disk use under the "Settings" tab on the ipod, but I don't have that option for some reason. I have already made sure that prevent from syncing automatically in iTunes Preferences.
    Not sure what else to do....any help is appreciated!

    This isn't going to solve all your problems, but if you want to "enable disk space" then you probably need to upgrade itunes to 9.03.15 (or what ever is newest when you see this). That version has that feature under settings if you scroll down a bit. Good luck!

  • Can't enable disk use ( 5th Gen 30g Video )

    Everytime I try to enable disk use on my iPod, I hit 'Apply' and it begins updating. However, my iPod only briefly shows " Updating do not disconnect ", and my iTunes says it is still updating for a few minutes, frozen. Until, ultimately, an error pops up and says " Unknown error (-50) ". I just need to enable disk use. Is there any other way besides iTunes, which is obviously a piece of garbage?

    i had that error all the time error -50....not anymore..
    here's a bit here's what microsotft says: (paraphrased)
    To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps: 1. Click Start, click Run, type regedit , and then click OK.
    2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E980-E325 11CE-BFC1-08002BE10318}
    3. On the Edit menu, click Delete, and then click OK.
    4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\4D36E967-E325-11CE-BFC1-08002BE10 318}
    5. On the Edit menu, click Delete, and then click OK.
    6. Exit Registry Editor.
    7. Restart the computer.
    it worked perfectly for me!make sure to follow the directions. it's easy and resolves many Windows XP problems related to ipods. for more info try microsoft help and support and just serch for ipod. it list a bit more info there. it doesn't say anything about reinstalling the apple software, but just to be thorough i unistalled itunes and quicktime before anything just to start with a clean slate, then reinstalled them from my ipod disk after the restart. then i downloaded all the updates from apple. my ipod has never worked better. good luck. theres no link to the page just search for ipod in windows help and support for exact wording

  • TS1930 Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

    Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

    There is no enable disk use option for iOS Devices.  See this article for instructions on copying videos and photos from your iOS device to your PC.
    iOS: Importing personal photos and videos from iOS devices to your computer
    B-rock

  • "Enable Disk Use" checkbox is grayed out, can't untick.

    Hi,
    I just got my new iPod 30 GB video today! I've been reading these discussions, but haven't found an answer for this tiny problem of mine.
    "Do Not Disconnect" constantly shows on the iPod screen when it's connected on the computer. Many have suggested ticking off "Enable Disk Use", but here's the problem: it's grayed out, and I can't change it, no matter what. I've gone through iTunes prefs, by right-clicking on the iPod in iTunes and selecting "iPod Options". My system seems to show iPod as a movable disk, but iTunes recognises it and I can easily put music into it, so I guess that isn't a problem (or is it?).
    But how could I get my hands on the "Enable Disk Use" checkbox? It just isn't "tickable" now.
    Thanks!
      Windows XP  

    If you have your iPod set to manual update, the "Enable Disk Use" box will be greyed out and ticked by default, in that case use Safely remove Hardware icon or check this link: "Disconnecting iPod from your computer
    " http://docs.info.apple.com/article.html?artnum=61135
    For Info:
    The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
    1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
    2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
    3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

  • How can I uncheck "Enable disk use" in iTunes for my iPod? The option is grayed out, and permanently checked.

    When I plug in my iPod Nano (6th generation) and launch iTunes, the device appears in the sidebar as normal, but the option to check or uncheck "Enable Disk use" in the Summary pane for the iPod is grayed out. Currently, the box is checked, so "Enable disk use " is turned on -- but what I want to do is UNcheck it and turn it off.
    But nothing I've tried so far has successfully ungrayed the "Enable disk use" box. Help!
    Question: How can I ungrey the "Enable disk use" option in my iPod's Summary panel in iTunes, allowing me to uncheck it?
    Alternately, is there any other way to turn off "Enable disk use," using some esoteric workaround? Thanks!

    Set it to sync automatically. Disabling that option isn't possible for an iPod set to sync manually, as it shows up as a disk as part of the sync process, and iTunes has no way of knowing when you're done syncing an iPod set to do so manually.
    (59725)

  • Why can't I enable disk use on my Ipod touch?

    I wish to use my ipod touch as an external hard-drive. I have watched videos on how to go about it and they show that there is a greyed out check box that must be checked. This check box does not exist for me. Why not? and is it possible to enable disk use?
    MY ipod is an ipod touch 4th generation, 8gb, ios 6.1.6
    Itunes version - 11.1.5

    You just be looking at instructions for the older iPods. None of the iOS devices such as the iPod touch have ever supported disk use. There are third-party utilities that purport to provide workarounds to allow such use, but I have no experience with any of them so I can't make any recommendations.
    Regards.

  • Can't find 'Enable Disk Use' with iTunes 9 on my iPod Touch

    I have a 1st generation iPod Touch, and need to enable disk use, but can no longer find the option in iTunes 9! Can somebody please tell me how to do this? Thanks.
    EDIT: Just found out that the iPod touch doesn't support disk use... Although I've found a hack that makes it work, Thanks anyway.
    Message was edited by: johnthompson1993

    You just be looking at instructions for the older iPods. None of the iOS devices such as the iPod touch have ever supported disk use. There are third-party utilities that purport to provide workarounds to allow such use, but I have no experience with any of them so I can't make any recommendations.
    Regards.

  • Can't click on "Enable Disk Use" in itunes

    When I go to the itunes options and click on edit, then preferences, ipod, & music, the Enable Disk Use is not in bold print, but it is checked. I don't know what has happened, and I'm not able to use it.
    Can someone help me with this?
    HP   Windows XP   Using DSL for internet access

    "the Enable Disk Use is not in bold print, but it is checked. I don't know what has happened, and I'm not able to use it.
    Under normal circumstances if you have your update preferences set to "manually manage songs and playlists" the "enable disk use" box is greyed out, checked and enabled by default. Have you got your iPod set to manual update?

  • ITunes 10 Enable disk use

    So I've poked around a bit and tried searching for this, but it appears that I'm the only one having this issue as I can't find any topics on it... am I blind or has the "Enable Disk Use" been removed from iTunes 10? I went to enable this on my iPhone 4 the other day and couldn't find it anywhere. Looked under preferences, under the iPhone settings pages and even tried searching for it via the help menu which usually highlights the option somewhere.
    Am I just missing this or did they remove this option in the latest revision? If they did, is there any decent way to enable this by other means?

    (3 years later)
    MonsterBallZachJr wrote:
    I don't understand. I've used my iPod touch as a disk drive before, but after I installed the new iOS update the device stopped being discoverable as a folder from Windows Explorer. there's about 15 GB of files on it that I can't access. It's all useless space now, I can't even delete them from my iPod without restoring it...
    the iPod touch has never had the option to Enable disk use.
    However you thought you were doing it, it was not an option in iTunes unless you used some other application to hack iTunes.

  • Enable disk use and Manually manage music and videos

    When I go to Summary, Enable disk use is checked but dim, so I can't change it. Manually manage music and videos is checked and not dim. Is this enough to do so that I can manage the videos I have shot on my Nano from iTunes, or do I have to do it from iPhoto?

    Hello JohnKerr48,
    I can manage the videos I have shot on my Nano from iTunes, or do I have to do it from iPhoto?
    You have to manage them via a Finder window, through iMovie, or iPhoto. They cannot be managed via iTunes unless you copy them from your Nano onto your Mac and then import them into your iTunes library. For more information, see this Apple support document.
    http://support.apple.com/kb/HT3822
    B-rock

Maybe you are looking for

  • Programatically closing an execution

    I havedeveloped a custom TestStand UI in LabVIEW. However I have run into a smallproblem I wasn't able to tackle. A useris allowed to load a sequence and then execute it. He can also stop theexecution. Load another sequence and run that sequence. Ino

  • How to Prind Barcode font In the PDF output

    Hi Guru I have designed the RTF file in word In which one of the field is barcode field , I have loaded the XML Data to the RTF when I submit the concurrent program and view tha output as PDF file the barcode field is give me data like this 12132145

  • Datas are not coming from top to bottom in collumn

    Hiiiii I am moving my data from itab to itab1. And in itab1 datas are not started from top of the collumn for each a/c no. A/CNO|AB|DZ|RV|SA 00001|00 |000|00 |10 00001|00 |000|00 |15 00001|00 |000|020|000 00002|00 |15 |000 |00 00002|21 |00 |000 |00 0

  • BAPI name to access employee data from systems like CSS, ISP GTP etc

    Hi All, Could you please suggest which BAPIs we need to use to access employee data from systems like CSS, ISP GTP etc Regards, Poonam Moderator message: Welcome to SCN! Moderator message: please do more research before asking, show what you have don

  • Download only - 2.2.1 updater - where did it go ?

    ok: 1. I synced my iPhone today 2. I got a message from iTunes you have a new download available 3. I dl to 90% and my whole computer halts (bummer) 4. I dl again this time choosing download only. I will apply the updater once I know I have the whole