Can't find dynamically loaded VI
I'm updating a code from LV6.1 to LV2011. The application runs fine before I build it and install it on another machine. When I install and run it on the other machine, it tries to open a file by reference, but it can't find a VI named DSA8300.vi. I get the following error message.
Open VI Reference in InitScope.vi->PATAR.vi-><APPEND>
VI Path: <B> c:\PATAR3.0.2\Range_RC3\Plugins\Scopes\DSA8300.vi<\b>
Built Application or Shared Library (DLL): Make sure all dynamically loaded VIs were properly included in the build specification for the application or shared library.
But I checked my build properties, and the file has been properly included in the build spec as a dynamic VI. What else can I check?
Thanks very much.
Solved!
Go to Solution.
efarr wrote:
I tried some things, but I'm still confused.
In the Destinations section of the Build Properties, there are about a hundred subdirectories shown where the application will be stored. But when I build the app, only about five directories are created. It seems like most of the directories are missing. Is this the installer you are referrring to? This only shows where your application will be installed. It does not create all those folders listed.
In the "Additional Exclusions" section of the build properties, I unchecked all the boxes, so nothing would be excluded. I got the same behavior.
One of the missing subdirectories is "Scopes", which would be the logical place for the missing VI. Did you create a folder called Scopes in the Installer? Is this where you expect the VI to be located?
The app builder seems to be leaving out a buch of files (or at least directories), and I can't figure out why.Which files and/or directories is it leaving out?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home
Similar Messages
-
How can I find when I loaded Maverick? I want to uninstall.
How can I find when I loaded Maverick? I want to uninstall it, but I want to go back to before I installed it for
Time Machine.No need to multiple post. See your other thread on this Topic...
https://discussions.apple.com/message/24544578#24544578 -
Can't find tab to load Airplay in App Store
Can't find tab, icon to load Airplay in App Store
airplay is built into ios 7. there is no airplay in the app store. you can find the airplay icon in control center when you swipe up. Note, the icon will only appear if it sees another airplay device on the same network with the same apple id, and when home sharing is enabled on both devices and on your computer - i tunes.
-
Where can I find what phone loads are compatible with CME?
I recently upgraded one of our CME systems to CME v10.0
I noticed that even though the CMEv10 Supported Firmware page says the compatible phone load for my 7911 phones is 9-2-1TH1-13,
my 7911's running phone load 8-4-3-16 all seem to be registering and running just fine.
So I must conclude that 7911 phone load 8-4-3-16 is compatible with CME v10.0
Where can I go to find out what phone load versions are compatible with CME or perhaps, at least, where I can find what phone loads are no longer supported by a version of CME?Hi Jared,
Specific CME versions are tested with the versions listed on the "requirements" doc like the one you mentioned (linked below), but are not limited to those firmware versions. The phone loads/firmware is completely independent from the CME/IOS version. And it is often appropriate to upgrade or downgrade phone firmware levels on CME and is fully supported :)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme10spc.html
I would look at upgrading the 8-4-3 firmware for the 7911's BUT you will need to move to an interim mid-point release like 8-5-2 as a first step due to the "important notes" shown here;
Firmware Upgrade Issues for SCCP
Note For all SCCP firmware upgrades from firmware release versions earlier than 8.3(3) to version 8.5(3) or greater, you must first upgrade your firmware to version 8.5(2). Once you have upgraded to version 8.5(2), you can upgrade your IP Phone to version 8.5(3) or later.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_3/english/release/notes/7900_853.html#wp57602
Cheers!
Rob -
I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am not trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks
You want your user library
Mac(user)/Library/Application Support/Adobe/Camera Raw/Settings
In finder click on Go then hold down the Option key and then click on Library -
Can't find my dynamically loaded VI path
Hi Folks,
I wrote a small VI to aid with file paths used for dynamically loaded VIs. It has worked well up until this point, when I tried to use it in a larger project. I can't seem to figure out what's wrong here - I was under the impression that as long as the (called) VI was included in the build, that it should be available from \built.exe\...
In terms of directory structure, the caller VI is at:
C:\Projects\LabVIEW\ABES v6.0.1\toplevel_602.vi
The called VI is in:
C:\Projects\LabVIEW\ABES v6.0.1\subvis\GUI\preferences\GUI_preferences.vi
Caller:
The 'AutoPath' VI:
Info received when trying to call subvi from BUILT exe:
Finally, project structure (auto-populating directories) and build spec's:
What is it that I'm not getting here?
Thanks for reading,
Jamie
v2009 devel. w/RTThe first example assumes two things:
There's a folder that has all the plugins.
The actual plugin VI is included in the build (e.g. by putting it in the Always Included section, as shown below), so it's also placed inside the EXE.
If this is done, then the "plugins folder" VI shown in my example and the actual plugin VIs keep their relative positions inside the EXE, which is the case the original poster had. In this case, as well as in my second example, you don't have to do anything - LV will automatically place the VI in the correct place INSIDE the EXE.
I didn't look at your code, but if you're not including the plugin inside the EXE itself, this can become more complicated, because you have to manage all the paths and the dependencies. I suggest you try to avoid doing this unless you must have the ability to add plugins after building the EXE.
If you do need, try searching around for info on plugin architectures. I believe there's some info in the LV wiki.
Try to take over the world! -
OBIEE Plug-in for AWM : Can't find the Plugin loaded
Hi ,
I am using 10g R2 database with awm10203A_win32 (10g AWM) downloaded from OTN for configuring my cube . Cube ,Measure and dimension configured fine but even if I am placing the obieeplugin.jar file in the Plugin location and configure the same path in my AWM interface ,after restart of AWM I can't still see Export to OBIEE Admin submenu .
However I have not this problem when I am running Oracle 11g R2 database with 11g AWM . It was perfectly fine that time .
Is it due to the database version for which 10g AWM doesn't support OBIEE plugin ? as I can see below information :
Supported Versions of Oracle Database
OBIEE Plug-in for Analytic Workspace Manager supports Oracle Database 11g,
Release 1 (11.1), version 11.1.0.7 and later, and Oracle Database 11g, Release 2 (11.2).
So I want to confirm this . Also if I am not being able to get the UDML generated by 11g AWM is there any way to get those cube configured in OBIEE 10g repository ?
Thanks in advance,
DebashisHelllo,
the most persons that are watching this forum don't really understand where you are talking about, this forum is dedicated for migration of non-Oracle databases to Oracle.
I did a quick search for "OBIEE" and the majority of hits came from the following forum:
Forum: Business Intelligence Suite Enterprise Edition
Business Intelligence Suite Enterprise Edition
So it is better if you place your question there.
Regards
Wolfgang -
Computer can't find printer since loading new camera software
i tried uninstalling the printer software, and then reinstalling but the set up assistant does not recognize the printer. its an hp multifunction printer, but the hp site was no help. if i reinstall my system software do you think it will help? also, do i need to back up all my files before doing this? will i lose my applications?
How about removing the new camera software since installing it caused the problem?
Regards
TD -
Since upgrading to Firefox 27.0 some webpages will not load when I click on them. It gives me a message saying that Firefox can't find the server. I have to click the link several time before it will load and sometimes when they do load it does not show the page right. It is like the HTML is messed up or something. I have tried everything I can think of. I started in safe mode, still did it., I removed add-ons, still did it., I reset Firefox and still did it., I completely uninstalled Firefox and re-installed Firefox and it still does it. I have tried Malware Bytes Anti-Malware scans and Avast boot-time scans and found no malware or viruses. I have found that those websites open the first time with no problems on my IE9 and they used to do so in Firefox 26.0. I'm at my wit's end. The website links are in my bookmarks and are used all the time so they are trusted and my avast is set to allow them. They range from news websites to gun websites and everything I have read says that Mozilla does not filter those unless something has changed recently.
Try this as a first step;<BR><BR>
Clear the Cache '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''<BR><BR>
and<BR><BR>
Remove Cookies '''''Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"'''''<BR><BR>
If there is still a problem,
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
While you are in safe mode;
'''''Firefox Options > Advanced > General'''''. Look for and turn off '''Use Hardware Acceleration'''. -
My LV program can't find the iak file when the program is loaded from a different PC.
Hello all,
My LV vi with Fieldpoint I/O and it's IAK file are stored on the company network. If I load and run the LV vi from the PC it was developed on, everything is fine. If I load and run on a different PC (that has an identical install of LV), the LV vi can't find the IAK file (all of the I/O pointers to the file are grayed out.)
Also, if I make an EXE out of the vi on the machine that can find the IAK, it won't find it if it's run from the other machine.
It is not related to whether one machine has different "rights", as they are identical. It's not related to different installs of LV, as they are identical.
I have found that this is related to the network login name/password, and to the machine's network name. If I login on the second machine and try to run the program, it won't find the IAK. If I point it to the IAK it will run. If I save it and log out, and then login as a different user with the same rights on the second machine, it won't find the IAK again, until I re-point it there when I re-run it. This is true for both the vi and the EXE.
This problem makes deploying the EXE difficult to different machines, as the first time it's run, the EXE has to be pointed to the IAK. Pointing the EXE to the IAK is difficult as these installations have no keyboard or mouse.
Does anyone have any ideas on how to fix this so the LV vi or it's EXE finds the IAK from no matter where it's loaded from?
Thanks,
MikeLaura,
I figured I'd continue this thread because it's along he same line..
I have two Fieldpoint systems. They are identical, except for one thing...one has an AI-110 in position 7...the other has nothing. Both have the same IP address, etc and I swap the ethernet cable between them when I want to select which one I use. I use a dedicated ethernet card to the FP processor...and it's not the company net.
There are two IAK files...one for the system with the AI-110, one for the system without the AI-110. The two IAKs are in different paths.
Before I had the system and the IAK without the AI-110, I made an EXE of the code that woked with the AI-110, and it worked fine.
But now if I run the EXE after I've used MAX and opened the IAK without the AI-110, the EXE won't read the AI-110! I have to go back into MAX and open the IAK that has the AI-110 in it, close MAX and restart the EXE for the EXE to see the AI-110. (Max is NOT SET to "Download Items on Save")
I looks like the EXE is looking at MAX to get the IAK or a pointer to the IAK.
Did I build my EXE incorrectly? Shouldn't an EXE completely ignore MAX once it's made?
Thanks,
Mike -
iTunes can not find the music that was down loaded form the iTunes store. Why? Where is it locateded? They are there and play for a short while then they disappear. Why? What is happening to the songs that I have down loaded????? Anything that I import form a cd is still there!
Why can't iTunes find what I down loaded from the iTune store???????
If Heaven
3:31
Andy Griggs
This I Gotta See
Country
17
In front of the "if" there is a gray circle with and "!" in the center. When I click on the song to play I get this message.The song could not be used because the original file could not be found.iTunes can not find the music that was down loaded form the iTunes store. Why? Where is it locateded? They are there and play for a short while then they disappear. Why? What is happening to the songs that I have down loaded????? Anything that I import form a cd is still there!
Why can't iTunes find what I down loaded from the iTune store???????
If Heaven
3:31
Andy Griggs
This I Gotta See
Country
17
In front of the "if" there is a gray circle with and "!" in the center. When I click on the song to play I get this message.The song could not be used because the original file could not be found. -
How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
Thanks....Launch Keychain Access and click on Login in the left hand pane and then on Passwords. Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up. That will give you the ID no. and password.
OT -
iCal reports that it can't find server, and lots of data from several years ago is trying to get attention. Cannot bring up calendar in any view to use. also keeps loading unused calendar websites from long ago. I can' remove them. what to do?
UPDATE: I had 36 Safari windows open and minimized on the dock from my last session; 20 of those windows failed to open b/c Safari "couldn't find the server"; I just went to the URL bar of all 20 pages and clicked return, and all 20 pages loaded perfectly, without dropping any images or losing formatting. This is a puzzle!!!
-
I would like to see all my contacts in my old outlook acount, after loading the cloud I I can only find them in the new cloud acount. How do I get them back in the old outlook acount?
In Outlook, export your contacts to a .pst or .csv file. Keep the exported file
How to export contacts from Outlook for Windows. -
My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Maybe you are looking for
-
When the choices are given for me to click my preferences of encryption levels I don't know what I should check for the most safety.
-
How do I move back from main screen view to desk top on my IMac
On my IMac I am on main screen,no icons visible,how do I get back to launch pad screen
-
How to set the default values for print options
Hi all, We can set the default value for print options, just like Logical destination.numbers of messages.print immediately and so on, so where we should to maintain these default?
-
Hi All, While configuring Router we are facing an issue attached. please help me where to recity this dump. Thanks in advance... Regards, Krishna.M
-
Help in linking email to web page in iWeb
I have previously linked my web hosted email to my web site but cannot do it now. I have on my first page the logo "email me" then go to the inspector to hyperlink the info and the inspector doesn't work. How can I get my web based email address embe