Can't find IP addresses of connected Ethernet devices....

I have an Airport Extreme running 7.6.3 and my Airport Utility is 6.2.
I need to see a list of connected Ethernet devices and their IP addresses and/or MAC addresses. All I can find says to use Manual Setup in Utility, but I cannot find that. Help? I don't know if those instructions were referring to a previous version of Airport Utility or what....

The "Manual Setup" option is a clue that the instructions are for version 5.x of the AirPort Utility. Version 6.x does provide a list of wireless clients with both their IP & MAC Addresses ... but doesn't provide a means to see any wired devices.

Similar Messages

HP Laser Jet 200 Mac system error 79 can't find IP address cannot connect to router

I cannot print anything. The printer gives me a 79 system error message. I've restarted the printer and my computer a dozen times. The IP address for the printer is nowhere to be found. My router is a cisco Lynksis E1000 and is working.
Please help.

Hi,
What is the exact printer model? there are 4 different models of the Laserjet 200 Serieses
If the printer is connected with an Eterhent cable, unplug the cable and temporary plug a USB to the computer, for wireless simply plug a USB and update the latest firmware which referenced as following:
Fixed a 79 error when printing certain documents.
For the Laserjet 200 M276n or M276nw use the following firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108132-6&cc=us&dlc=en&lc=en...
For the Laserjet 200 M251n or M251nw use the following firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108135-7&cc=us&dlc=en&lc=en...
Once the updaet completes unplug the USB and reconnect it to the network if required and check again.
If the same persists and the printer is connected with an Ethernet cable, may the error disappears by unplugging the ethernet cable and restarting the printer?
If it does, try a different LAN port or a different cable and check for any difference.
Hope these steps may help, for any issues please clarify the exact printer model and how it is connected to your Mac.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

G580 with Windows 8.1 Pro - Installer can't find Qualcomm atheros AR81 family ethernet controller

Dear Support / Friends.
I am using G580 for the past 1.8 years. Over the last two days i am unable to connect to the internet using the Ethernet cable.The Lan Adapter is a constant Green/Orange Light. Tried reinstalling the AtherosLan(v2.1.0.21) driver, it says Installer can't find Qualcomm Atheros AR81 family Ethernet controller.
I have already rebooted the system by loading OS default in BIOS setup,removed the RAM modules for a while after switching off the laptop, but to no avail the problem still persists.
Surprisingly, I can connect to the internet only through the WiFi adapter.
Can any one help me resolve this issue, as I have been racking my head for solutions on the internet, including opening up the laptop and removing all the hardware components and re-assembling the G580.
Please help me fix this, as I have a feeling it is a software workaround more than a hardware failure.
Thanking you in advance.
Cheers,
air_289

What interests me is the "LANDevice" listed. That is not present on my G580, even when showing hidden devices. I can not see mention of it anywhere on the net, would that be a possible indicator showing that Windows has remapped the LAN Device to some incorrect driver?
If I could see the Hardware ID from that device it would help me locate what it might be attached to. Right click on device, choose properties, then the details tab, then use the drop down to select Hardware ID, copy and past into your response.
Good luck.
PS - while you are cleaning, look at the pins inside the socket - none should be touching or crossed over, would "short out" the port.

I tried to download a game on my iphone 4 but it says I need the ios 4.3 update. My phone doesn't say there are any updates available and I can't find it when I connect to itunes. What do I do?

I tried to download a game on my iphone 4 but it says I the iOS 4.3 update. My doesn't say an udate is available and I can't find it when I connect to itunes.

Update to the current version of iTunes on the computer.
Update the iOS on the device.

When sending an email to several people I can't find the address book icon in the tool area

when sending an email to several people I can't find the address book icon in the tool area that used to be at the top of the Leopard system...if you have 20 individual addressees how do I access my address book? j

If you don't see the "shadow man" icon, right click the toolbar and select customize.. drag the icon up to the bar.

TS1398 Can not connect to Wi Fi on my iPad Wi Fi is on and will connect to other devices IPad is searching for network and can not find a network I have reset device and nothing is working help

Can not connect iPad 2 to wi fi IConnection works on other devices. This device is searching and can not find Wi Fi to connect too

It does connect at other Hot Spot locations. At home and here at my office, I have At&t DSL & Wireless,Motorola 3347 Router. Computers hook right up to wireless with no problem, I just can't get ipad to connect. Password is rejected. Thanks for you quick response, I am not very computer litterate and this is driving me crazy. Thanks again
Mike

Running FOXFIRE 6.0 on a Windows 7system and when I go to Sync I can not find the option of adding another device. Where is it?

Trying to sync another computer to sync, but going from Tools to Options to Sync I can not find the Add A Device choice. have looked everywhere but can not find the frame that allows me to enter the codes from the second computer. Have installed the sync function on the first computer and have received a sync key.
What am I missing and where do I find "Add A Device"?

Thanks for trying to help solve a problem in Foxfire's sync function. I guess I haven't done a very good job describing the problem so I'll try again.
My desktop computer is running Windows 7 and Foxfire 6.0. I had no problem establishing a sync account and obtaining the Foxfire Sync Key. Now I would like to sync my Asus Eee Transformer Tablet running Android 3.2 and Foxfire 3 (for Android). On the tablet I go to Sync, then Connect, and get the three-box code to be entered on the desktop computer where the sync account was established. So far, so good.
I then go back to the desktop computer and in Foxfire click Tools, then Options, then click on the Sync symbol, then click on Set Up Foxfire Sync, which is the only option available. I am then taken to a page with two options: Create A New Account, or Connect. sunce I have already created an account I click on Connect. I then get a page with a three box code and am told to go to the other device (the tablet) and select Add A Device. Unfortunately, on the tablet the only choices available are Sync and connect, which returns a three box code. No where can I find a page or an option fo Add A Device and enter the three box code.
So, in summary, I can not find w page to Add A Device and enter the three box code on either the desktop computer or the tablet. If all else fails, I guess I can go back to day one and establish a new sync account on the desktop computer, or completely give up on the sync, which is a nice feature but one that doesn't work.

My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

Unless you have configured iCloud on the MacBook Air and made sure that Find My Mac was turned on, you can't track that. And even if you did do that, that is not a foolproof method of tracking, as it relies on the thief connecting to the internet using the guest account on the machine and not getting in to your account and disabling Find My Mac or wiping the hard drive and installing a clean system.
As for the iPad, similar rules apply there. If it is a wifi-only iPad, it cannot be tracked any other way. If it has 3G, your wireless carrier may be able to help you track it.

How can i find out which of my apple devices made a purchase from the app store?

How can i find out which of my apple devices made a purchase from the app store?

Not possible as purchases can be downloaded to all devices using the same Apple ID.

Can I find an address???

Hi Guys
6120 c with nokia map, external GPS.
I would like to go to an address, I have no idea where is it. How can I find it?? I mean, Im gone OPTIONS - FIND PLACE - ADDRESS I typed it in and nothing.(btw in australia we have lots of country area, where I just cant know what city or ZIp number I should type in, kinda poor) doesnt find it.so what im missing?? I tried the update, says my map is up to date...
Im sure it should work somehow..
thanks

Hey there,
check out those following steps:
> Using an external GPS receiver (for example connected via Bluetooth technology), please press 0 on the numeric keypad of your mobile device to connect to the GPS receiver, so you can use the full GPS functionality of Nokia Maps. If Bluetooth is not switched on already, you will first be asked whether you want to switch on Bluetooth. Your mobile device will then start searching for devices available via Bluetooth technology in your surrounding area. From the result list displayed, choose the correct entry to connect to your external GPS receiver.
You may be asked for a pass code to connect to your GPS receiver. Although this pass code is “0000” in most cases, please have a look into the manual of your GPS receiver to find out what the correct pass code is.
>If no satellite signal is found, consider the following:
Check that your hand does not cover the GPS antenna
If you are indoors, go outdoors to receive a better signal
If you are outdoors, move to a more open space.
If the weather conditions are bad, the signal strength may also be affected.
The time it takes to establish a GPS connection may vary between a few seconds and several minutes.
Avoid using a screen saver when the GPS connection is being established
>Please mind that when using an external GPS receiver (for example via Bluetooth technology), you have to press 0 key on the numeric keypad to establish a connection to the receiver (if Bluetooth is not already switched on, you will first be asked whether you want to switch on Bluetooth.
>Check that the address is spelled correctly.
Check that the ZIP number and Country are spelled correctly and that they are compatible with the address.
Try to search online. A local search will only work if you have downloaded the necessary maps to the device.

HT1688 where can i find IP Address for my iphone 4

where can find IP Address on my iphone 4s

Settings > WiFi tap the small blue arrow next to the network you are connected to.

Find IP address/machine connected to a cisco switch port

hello,
I need to know which IP/device is connecetd to a cisco Switch port.
I can get the mac-address of that switch port using sh mac-add command, but with the mac address how can i find that which ip belongs to this mac.
is there way i can do this, i know i can do the other way meaning with IP i can find to which port its connected ,but dont know how to find this MAC to IP with switch without the need for additional tools

Hey Anantha ,
Hop u r doing good,
If u dont know ip address of devices present on specific vlan and wanted to track end device ip address please try
follow this below
steps 1:ping it to brodcast ip address of subnet
for ex
R1--SW1--SW2--(H1
                             --H2
R1..1.1.1.1/24
H1..1.1.1.2/24
H2.1.1.1.3/24
So u r brodacast ip is 1.1.1.255
ping 1.1.1.255
Sending 1000, 100-byte ICMP Echos to 1.1.1.255, timeout is 2 seconds:
Reply to request 8 from 1.1.1.2, 28 ms
Reply to request 9 from 1.1.1.3, 64 ms
u will get reply from all host present on that segment and ur arp table will get flood with ip and respective mac on
your L3 device...(R1 in this example)
Step2: then u can use command
sh ip arp ..to see ip and respective mac associate with it
R1#sh ip arp
Protocol Address          Age (min) Hardware Addr   Type   Interface
Internet 1.1.1.1                 -   c000.2498.0000 ARPA   Vlan2
Internet 1.1.1.2                 0   c003.2498.0000 ARPA   Vlan2
Step3: see the mac learned from specific port
R1#sh mac address c003.2498.0000
Destination Address Address Type VLAN Destination Port
c003.2498.0000          Dynamic       2     FastEthernet1/1
Step4:If u have all cisco devices then u can use CDP
to check wht device connect to ur interface
R1#sh cdp ne fa1/1 detail
Device ID: SW1.lab.local
Follow this way, hop u will trace devices present on ur network
Hop this informative,
Regards,
Ashish shirkar

Where in Lion 10.7 Time Machine can I find the Address Book file

Help!
I Sync duplicated my Address Book entries. But now with Lion 10.7 I no longer can find the Address Book contacts file to restore in Time Machine.

Sorry, but you're still in the top-level Library folder.
Select the ~/Library folder via Alt/Option key while selecting Go from the menubar:
Then Enter Time Machine.
Message was edited by: Pondini

Can't find HD that is connected to airport extreme

I just bought airport extreme today, my wireless internet is working fine, but i can not find the external HD i connected to it.
???

the time capsule box is that new airport extreme they just came out with right? thing is, i have plenty of external hard drives and don't need or should have to spend money to get the same thing i have with a built in hard drive.
i appreciate the info, however i am REALLY hoping to find a permanent solution using what i have. if not, i guess i need to return it.
are there any other options out there, outside of apple that can provide this utility?

Can't Find Email Address for HP LaserJet Pro M1213nf to Use eprint

I updated the firmware and printed out the Self Test/Configuration page but I can't find the email address for eprint. Any suggestions?
This question was solved.
View Solution.

First thing I would try is clearing your browser's cache, and try again. If that does not work, try using a different browser. If neither works, let me know and I will see what I can find.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Can't find IP addresses of connected Ethernet devices....

Similar Messages

Maybe you are looking for