"Can't find recent OpenSSL libcrypto" error when configuring openssh 4.3p2

This is being done on a new install of Solaris 9 (patched) with Studio 11 installed. I complied openssl 0.9.8a with the following:
config --prefix=/usr/local shared
openssl builds fine and the output of openssl version is Openssl 0.9.8a.
When I try and run the configure script with openssh I get the can't find recent Openssl error before the configure script can continue. The config.log reports the following:
"ld: fatal: library -lcrypto not found"
At first I thought the problem was I had to explictly define where the libcrypto file was located so I modified the configure script and edited the -lcrypto line to point to /usr/local/lib/libcrypto.so. This didn't help. I have tried defining --with-ssl-dir but that doesn't help either. 
Anyone ideas/suggestions would be appreciated.
-- Chris

Hi
Not very pretty, and I don't know if autotools will undo it behind your back, but setting
LD_OPTIONS="-R/usr/local/lib"
might do the trick.
Paul

Similar Messages

  • My Top Rated songs, when I synch my iP4S - comes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong?

    When synching, itcomes up with an error message saying it can't find all the songs. When I check, library has songs listed but with a "!" bubble next to them. When I click on them they play. What am I doing wrong? This happens every time so I click them and it sorts them (boring with 200 odd). How can I prevent this?

    Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match.  Your iTunes Match library will then appear on your iOS device.

  • I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore.  I can't find any information on error 1413, what does this mean?

    I had to get a new ipod....they said I just needed to plug it in and sync to my itunes.. I get an error 1413 when I try to follow the instructions to restore.  I can't find any information on error 1413, what does this mean?

    Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."

  • My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file loca

    My computer is saying it can't find the file 'iTunes64.msi' when I try to update or redownload iTunes how do I fix this? I've tried just about everything I can think of. I am using a dell laptop running windows 7 and have tried changing the file location to run the update in all of my iTunes files as well as when I've tried reinstalling it.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • How do I get past "can't find valid dvd player" error?

    This is regarding a G4 powermac running Tiger 10.4.3
    My Sony dual layer DRX-720UL/T seems to work fine with DVD-ROM content. My kids use it for DVD-ROM games and I had no problem installing Tiger. Problem comes in when I open "DVD player" and get a "Can't find valid dvd player," error. They're connected via Firewire 400, and I've tried the USB link, just to see, but the same error comes up. I'm fairly certain that I viewed a DVD before upgrading to Tiger. The Sony is supposed to be fully mac compatiable, and even comes with Toast light 6. Again all seems to be well except for the fact that DVD player won't allow me to view a NTSC DVD. No matter how many I try.

    What drive was in this G4 prior?
    If you did not have a DVD drive, you need to use Pacifist to extract & install DVD Player.app; downloading or drag&drop won't work.
    Also, Sony drives are probably the worst when it comes to compatability; one specific model may work fine, and others not. This should be less of an issue in Tiger, but only if the problem is other than the optical drive firmware, about which you can do nothing (on a Mac), unlike Pioneer & NEC drives that have mac-based flashers available.
    If DVD Player was installed previously, based on having a DVD drive prior to Tiger install, you may want to try running the 10.4.3 Combo updater over your existing install.

  • Find My Friends - Server Error when logging in

    I have been using Find My Friends on my iPad4 and iPhone5 for about a month but now I am getting either an error suggesting my Apple ID password is wrong, which it isn't or I wouldn't get to post on here - plus I have checked via appleid web portal.
    Currently it says "Find My Friends Alert - Find My Friends is unavailable due to a server error."
    However, my friends are logged into their iPads and iPhones using the service without a problem.
    Any ideas?

    Solving Find my Friends Alert "Find my Friends is unavailable due to a server error, is actually caused by how you have logged onto Apple - I have found.
    This seems to be a common thread that stems from before Apple introduced email. At that time I first created an Apple identity for the 3GS, it was using the email address I already had. On subsequent iPhone hardware and software upgrades that introduced Apple based email, like @me.com and latterly iCloud, logging onto an updated software version you are invited to use the Apple based identities which you invariably do. This can be a mistake as original Apps are linked to the core identity based on the original one that first set up, and unless this is used then some Apps like Find Friends give misleading error messages like Cannot find Server, or Server error, when the problem is how you have logged on.
    Merging those multiple identities would be a solution, but one that I haven't yet found.

  • Can't find my iweb domain file when searching for it in iweb seo tool

    I am trying to get my iweb website recognized by Google. Can't seem to get the google html code to work in html snippet. So am now trying to use the iweb seo tool but can't find my iweb domain file when searching for it in iweb seo tool. My file is in user/library/applicationsupport/iweb/name.sites2
    It shows in the folder but is not active, so I can't choose it.

    The SEO ftp client is not what I'd recommend using. Once you add the metadata to a local copy of the files use a 3rd party ftp client like the free Cyberduck to upload the files. Much more reliable.
    Google does not use keywords for it's searches although other search engines do. Create a test page on your site (leave it out of the navbar) and try adding Google Analytics to it with Wyodor's instructions. If you get it to work then all you need to do is copy and paste the HTML snippet from the test page into your site pages.
    For information on visitors to your site you can also use StatCounter. It records the number of visitors and a lot more: where they are from, what browser used, which page visited and what site/page then came from for just a few. SC is easy to add to the pages as you get the code for your account, put it in an HTML snippet add the snippet to each page. Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet describes how to do it.
    Again use a test page or a separate test site to work out the details before adding to your site pages.

  • Can only find recently added Itunes music, can't find all the other music that should be on there?

    Can only find recently added music in my Itunes library. Can't find any of my music I added awhile back?   I think my old music is on icloud, but don't know how to access it?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Manage Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
      - Restore to factory settings/new iOS device

  • Can we find out the date/time when the datafile last extended?

    Hello all,
    Can we find out the date/time when the datafile last extended?
    Is it possible to find out from the alert.log file?
    Correct me if I am worng?
    Thanks in advance
    Himanshu

    In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
    Thanks
    Himanshu

  • Why I can't find recently purchased movie in iTunes Store?

    Why I can't find recently purchased movie in iTunes Store?

    Hi - you are not alone in this. I've had the same problem, and apparently so have others. I'm also following the discussion:
    Re: Purchased music does not appear in my "Music Library"
    Posted: Jan 5, 2011 5:06 PM   in response to: Bryan Berman  
     Hopefully we will find the solution!

  • TS4062 can't find recent photos in icloud

    I can't find recent photos in icloud. was updating my iphone 4s. i have to restore my phone can't find any of my photos or access my phone until i restore it
    is their anyway to recover recent photos?

    The online iCloud account site does not display photos in the Photo Stream. It only lets you access these functions:
    PS photos are only viewable on your desktop/laptop Mac and on your mobile devices.
    OT

  • Can't find recent driver for graphic card (display) cyberaladdin trident

    I can't find recent driver for graphic card (display) cyberaladdin trident.
    The game play with game Warcraft III.
    I downloaded directX 9
    I managed to install the game but I can't play it.
    My display card is Trident Cyberaladdin-T. The game producer told me it is compatible. I tried to find drivers but I haven't find anything efficient. On toshiba site there a driver but quite old (previous to the date I bought the computer...)
    I don(t knox what to do and my son is very disappointed because he can't play with this new game.
    Thanks for your quick answer.

    Hi,
    At first it would be interesting to know for which Operating System your need this driver ? ;)
    Well this Chipset Trident CyberALADDiN-T ( called Napa2T ) was build in three Notebook Types of Toshiba.
    The Satellite 6000, TE2000 and the Satellite 6050. ( Driverversion all with Version 5.01.2527.0128 )
    Normally the drivers you find on the manufacturer Pages are not the actual drivers. They only update the drivers if there are known problems.
    So the only chance for you is to look threw the internet and look if someone else has used this graphic chip,and delivers are newer driver than Toshiba.
    Sorry for the answer, but I had same problem with my Machine, but found a newer driver revision on another manufacturer page.
    bye

  • How to retrieve Pages docs in Finder?   Can't find recent saved Pages documents

    How to retrieve Pages docs in Finder?   Can't find recent saved Pages documents

    Tried that. Dropdown window only offered these options: 'Lock Duplicate, Browse all versions. It did NOT give me the location of the document. I want to go to the document and attach it to an email. I cant find the document on my computer. There is no option to 'save as' under finder window. Only 'save a version'

  • Please help-how can I find accents on the keyboard when typing in French?

    Please help.How can I find accents on the keyboard when typing in french?Thanks

    You can also open the Keyboard Viewer & hold Option key & Shift+Option to see...
    Option key...
    Shift+Option or alt key...

  • 'No such host is known' error when configuring Reporting database

    Hi,
    We are joining two report server databases using reporting services config manager. The problem is when we are trying to connect database on another machine we are receiving following error at step 'generating Rights script'
    System.Net.Sockets.SocketException: No such host is known
       at System.Net.Dns.GetAddrInfo(String name)
       at System.Net.Dns.InternalGetHostByName(String hostName, Boolean includeIPv6)
       at System.Net.Dns.GetHostEntry(String hostNameOrAddress)
       at ReportServicesConfigUI.RSDatabase.IsLocalDbServer(String dbServer)
       at ReportServicesConfigUI.RSDatabase.GrantRSConnectionRights()
       at ReportServicesConfigUI.RSDatabase.CreateNewDatabase()
    As per step mentioned in following link,
    http://blogs.msdn.com/b/sameersurve/archive/2009/06/15/no-such-host-is-known-error-when-configuring-ssrs-2008.aspx
    We tried opening port 1434 for the Reportserver db machine. but it didnt worked for me.
    Following are points i feel could be the reason of failure,
    1. The two machine we are working on are in different domains.
    2. The Product version of the two reporting servers are different.
    Have anyone experienced this if yes any solution that i can try? 

    Hi Shrikant_k,
    If we are using a remote database server for the report server database, we should refer to the following tips:
    Enable remote connections. And we should also open your firewall software and open the port that SQL Server listens on. For the default instance, this is typically port 1433 for TCP/IP connections. To verify that the instance accepts remote connections,
    please refer to the following article:
    http://technet.microsoft.com/en-us/library/ms157300(v=sql.105).aspx
    When you enable remote connections, the client and server protocols will also be enabled. To verify the protocols are enabled, please see:
    http://technet.microsoft.com/en-us/library/ms191294(v=sql.105).aspx
    When the database server is in a different domain or we are using workgroup security, we must configure the connection to use a SQL Server database login. In this way, we must update the report server database connection every time we change the password
    or the account.
    When creating a report server database, be aware that not all editions of SQL Server can be used to host the database. The following document is for your reference:
    http://technet.microsoft.com/en-us/library/ms157285(v=sql.105).aspx
    Reference:
    Configuring a Report Server Database Connection
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for