Can't force iMovie HD 6 on Intel Core Duo iMac into Rosetta from get info.

I can't get it to force imovie hd 6 into rosetta mode from get info. (doesn't show words and check box "force Rosetta" like other programs. If it can't, how can i get chromakey on imovie?

Last night, I was trying to do this as well. I was attemping to get plugins that worked with iMovie5 and clicking the Rosetta option was supposed to be work-around. I am guessing it no longer works with the latest versions of the Intel systems or iMovie.

Similar Messages

  • Can I upgrade a 1.83GHz Intel Core Duo iMac running Leopard OS X 10.5.8 to Snow Leopard 10.6.3?

    Can I upgrade a 1.83GHz Intel Core Duo iMac running Leopard OS X 10.5.8 to Snow Leopard 10.6.3?

    Yes this machine will run 10.6 with no problem
    Sadly it will not be able to run 10.7 in the future though.

  • Can I run Lion on on a Intel Core Duo computer?

    Can I run Lion on on a Intel Core Duo computer?
    I have on of the Intel Core Duo  macbook.
    I hope on othe apple people can answer that for me.

    This is my Macbook and I seem to be able to run a depleted Lion operating system on it
    no full screen on some applications. no response to multi swipe actions, No Air Drop. and so on and so on. Also when it loaded it stalled with no real information and i had to go to reload Lion which then instigated further download of 6 minutes to load a slightly amended copy of Lion. thought i had lost all my info but it did all reappear
    It does have Launchpad and Mission Control but i seem to have lost my Isight camera in Photo booth and Skype. this has happened occasionaly before and a reboot brings it back for a while.
    Ah well Is it time to up grade the laptop?? Do i need a laptop?? Anyway ill keep this one for a bit and see how it goes at least some of the changes work.
    Model Name:          MacBook
      Model Identifier:          MacBook3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.2 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          4 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MB31.008E.B02
      SMC Version (system):          1.24f3
      Serial Number (system):          W8***4
      Hardware UUID:          B618B269-D4FC-5A1D-BE2E-E8B2383FEEA4
      Sudden Motion Sensor:
      State:          Enabled
    <Edited by Host>

  • Can anyone get lion to work with the older intel core duo iMacs?

    Has anyone been able to get Lion to run on the older Intel Core Duo iMacs?

    http://osxdaily.com/2011/04/08/hack-mac-os-x-lion-for-core-duo-core-solo-mac/

  • Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open.

    Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
    Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

    Need to Install Safari 6.0.2 on a white Intel core duo iMac. Had to throw out 6.0.3 because of conflict with required software. Downloaded wrong version that was for Mountain lion (I am running 10.7.5). It installs but won't open, says it is for Mountian Lion.
    Of course I can't throw it away since I get a message it's part of the sytem. I can show package contents and throw those away, but evidently not a good idea!!

  • How do i back up my files from an intel core duo imac to an external hard drive?

    Hello
    How do I back up my files from an intel core duo imac to an external hard drive?

    Like you do with any other Mac*:
    http://www.macmaps.com/backup.html
    Note: if you have a CoreDuo, you can only upgrade up to 10.6.8.  Only Core2Duos and higher can go to 10.7 (Lion).

  • I have  a old 2006 modle macbook 15 inch the  A1150 i believe with core duo processor can change or replace that with a intel core duo 2 processor ?

    it,s a 2.16 GHz Intel Core Duo
    memory 2 GB 533 MHz DDR2 SDRAM
    is there some kind of way i can  upgrade that to a Intel Core Duo 2 processor
    or is it  just a batle i cant win ?

    You should be able to get a used or repaired MacBook 13/15-inch core2duo 2.0+GHz near
    $350 or so, in working condition with some kind of limited warranty or guaranty. Companies
    like macsales, wegenermedia, powerbookmedic, powermax and others offer previously
    owned Macs that are not current models. Older, to vintage or obsolete; those who some-
    times have the better deal on those also can repair most all Macs and have parts.
    The effort to swap out a logic board (and then what? the
    other parts likely won't match) isn't hardly worth the effort.
    You may be able to find an early MacBook (circa 2006 to 2010 era) that needs minor work,
    and troubleshoot/repair it with a DIY guide online... But that can be a gamble if you mess
    up things that were not wrong in the first place, while learning on the job. It could cost plenty.
    Some companies can sell you used parts, no guarantees on matching an incorrect logic
    board with a diffferent build model spec computer's other original configuration. You'd do
    better if you found someone selling their old MacBook Core2Duo, nearby, & could see it run.
    I have a MacBook 13-inch coreduo 1.83GHz first-edition; an early core2duo won't do much
    more than the coreduo. Snow Leopard is better than Lion in several ways; if you have older
    software you already own that works, from the PowerPC era -- that can save you money.
    Good luck in any event, & happy computing!

  • I have an older MBP that I purchased in 2006. I'd like to upgrade to Mountain Lion. Can this machine take that OS? Intel Core Duo running 10.6.8

    The issue is, I teach photography and just downloaded Lightroom 4.
    Well, LR4 won't run on the older OS. So, before I try to download Mountain Lion, I need to know if it will work on this computer or is it simply too old.
    Thanks

    OS X Lion and Mountain Lion are 64-bit operating systems, and the Intel Core Duo is a 32-bit processor, so you can't use Lion and Mountain Lion on your computer. Mac OS X Snow Leopard is the most recent version for your computer.
    As I can see, you are running Mac OS X Leopard, so buy Snow Leopard. Then, make a backup of your data, insert the DVD and upgrade OS X. When the upgrade finishes, open  > Software Update to update to the most recent version, so you will be using 10.6.8

  • Why can't install adobe illustrator on macbook intel core duo?

    I just bought the Macbook intel core duo, specifically so I could use Adobe Illustrator. I installed adobe CS2 and every program installed EXCEPT FOR ILLUSTRATOR! Tech support says Apple and Adobe are working on the problem. Can anyone help me?

    Welcome to the Apple Discussions!
    I've installed CS2 standard on about ten Intel-based Macs and and CS2 Premium on three Intel-based Macs at work. I haven't encountered any issues. No MacBooks at work though, just Mac minis, MacBook Pros and Mac Pro towers (which don't have the Core Duo chips).
    After reading your message here, I made a quick search of the Adobe support forums and couldn't find any messages there about anyone having a problem installing Illustrator CS2 on a Core Duo Mac of any kind.
    Our Intel-based Macs are all up-to-date with Mac OS X 10.4.8 and all the extras like QuckTime 7.1.3. Which "tech support" did you contact? Apple or Adobe? If Adobe is aware of the issue and is working on a solution, I'm afraid there isn't much we could do to help you here.
    -Doug

  • Airport Extreme 802.11n upgrade options for early Intel Core Duo iMac

    I have an iMac from mid 2006. I recently purchased a Timecapsule - partly for the wireless back ups, and partly to upgrade my wireless network to 802.11n. There is a software upgrade from Apple that upgrades older 802.11 a/b/g Airport cards in the iMac to 'n' standard. Here is the link:
    http://store.apple.com/uk/product/D4141ZM/A?fnode=MTY1NDA0Mg&mco=MjIzMDkzNA
    The page states that the upgrade is compatible "If you have a Mac with an Intel Core 2 Duo processor (except the 17-inch, 1.83GHz iMac)". What it doesn't tell you is that if you have an early version of the iMac (pre-Sept 2006) that shipped with the Intel Core Duo Processor (note - not the Core 2 Duo) then the upgrade will not work. I have also tried to install Airport Extreme updates (2007002 and 2008004) and these report that the hardware is not compatible. Doing some searching around these forums and others, the issue with the original Core Duo iMacs not being upgradeable to 802.11n is out there - shame Apple weren't more explicit.
    I have seen that there are various USB based 802.11n adapters available. Whilst searching on this topic, I also came across a site offering various Mac upgrades, including an upgrade to the Airport card to upgrade wireless capability from 802.11g to 802.11n. It looks like a straight replacement for the internal card - link here:
    http://www.macupgrades.co.uk/store/productinfo.php?productsid=461
    The company offering this is in the UK, but the product appears to be from a Sonnet, a US company. Does anyone out there have experience of installing this product (or having it installed) and can you comment on how it performs? Is it a seamless replacement for the original Airport card?

    What it doesn't tell you is that if you have an early version of the iMac (pre-Sept 2006) that shipped with the Intel Core Duo Processor (note - not the Core 2 Duo) then the upgrade will not work.
    If it says you need to have a Core "2" Duo processor, then it seems to me they are telling you very clearly that it will not work with the earlier Core (no "2") Duo iMacs.
    The "late 2006" iMacs with Core 2 Duo (except for that one education model they mentioned) have wireless networking hardware that is 802.11n capable. When they were initially sold, Apple chose to NOT enable the "n" capability for some reason; maybe because the standard was still in flux and not enough testing had been done with the driver. Later, they enabled the "n" capability with a firmware update. But that was only possible because the wireless hardware was already capable of doing "n."
    Earlier iMacs do not have this hardware so there is no way to enable it with a firmware or software update. 802.11g is plenty fast enough for Internet access (you won't notice a difference with "n"). If you are using Time Machine over wireless, it may take a while longer to do that initial backup (you could connected it by Ethernet cable when it is doing that initial backup), but subsequent backups are incremental, so the "g" versus "n" speed difference will not be as critical. Since your iMac is Core Duo (32-bit) and the future of Mac OS X is 64-bit, especially after Snow Leopard's release, it may be best to save your money and keep your iMac intact (not opened).

  • Upgrade Intel Core Duo iMac to Core 2 Duo?

    I know that, in theory a Merom processor is compatible with a motherboard made for a Yonah CPU, which is what's in the original Intel iMacs. However, I know that most Wintel laptops require a BIOS flash in order to support the newer processor.
    My question: do you think it will be possible for us to upgrade to the Core 2 Duo from the Core Duo? Will the speed increase be worth it? From what I've read, Merom is not that much faster than Yonah, but has anyone seen anything different?

    Hello,
    People have installed them in the Mac Mini CoreSolo and CoreDuo without a BIOS or Firmware update. So, it should be fine doing the same in the iMac CoreDuo.
    The CPU is in a socket in the iMac CoreDuo, so installation should not be a problem (if you don't mind dismantling your computer and voiding your warranty).
    Reports have varied on the speed difference. But, you do gain 64-BIT capabilities with Merom. Otherwise, Merom's specs are very similar to Yonah, so the gains are only going to come from optimized routines. Raw processing power probably isn't much different and the bus speed is the same.
    At this point in time, you're going to pay a lot for a new Merom chip. So, the cost benefit probably isn't there for an upgrade. But, as they become common and new versions arrive, the chips will probably drop a bit in price and make the upgrade more cost effective.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • Is it better to buy the Intel Core Duo iMac no. 1?

    Here the iMacs Core Duo 1,83Ghz and Core 2 Duo 1.83 Ghz are the same price. Difference is, the Core Duo has an ATI X1600 card while the Core 2 Duo has that crappy Intel 950 integrated graphics chip. So which would be better for me to buy?
    Thank you all so much.
    iMac DV SE 400Mhz   Mac OS X (10.4.8)  

    Thanks for the answer!
    From my experience Macs do not need 256 MB video cards, am I right? Like, ther ATI X1600 comes in 256, 512MB for PC versions... And when my Imac with its 8MB of video memory was able to play games, I always noticed that the same game on the PC required 32 or 64 MB of dedicated video.
    I know the Intel is better than the others... But since I read that all the options in World of Warcraft were greyed out using this card, it annoyed me... After all it's kind of an old game, since it runs on a G4 with 1 GHz.
    Anyway I've made up my mind and decided for the first model, actually it's 500 USD cheaper and that helped me a lot in choosing it

  • RealPlayer Safari plugin won't work on Intel core duo iMac 20"

    Real Player Safari plug in won't work on Intel coreduo iMac 20" to either listen to audi or to play video and I don't know whether it is a Safari issue, Rosetta issue, RealPlayer issue or all of the above. I am also concerned about asking Safari to run under Rosetta becasue this seems to defeat the point of getting the latest machine. Does anyone know what the problem is and the likely timescales for a fix? Thanks. John
    PS. I am able to access the resources I want using stand alone RealPlayer and Firefox.
    2GHz iMacCD 20" 2Gb RAM   Mac OS X (10.4)  
    1.25GHz iMac flat panel round bottom   Mac OS X (10.4.6)  

    Hello, this happens because Power-PC-plugins usually can't cooperate with Intel-coded programs. I've experienced the same mess with the famous GraphicConverter and TWAIN plugins from Epson. Until Real will not offer Universal-coded plugins, you have to use the Rosetta-bridge with PPC program versions. In such case I generally prefer the FireFox browser.

  • Upgrade to Leopard on Intel Core Duo IMAC with Parallels and VM Ware

    I received my copy of Leopard 10.5.1 today but after reading so many installation reviews on various sites, including this one, I am hesitant to install it. I did purchase a 500G Lacie firewire drive only because someone suggested cloning my current drive, just in case. I needed the extra drive anyway. I read up making sure all the permissions are up to date, so I was going to boot to my Tiger disc to make sure everything is fine with the hard drive. I am not sure how to proceed.
    Is there a way to have everything backed-up so that I don't have to reinstall everything over again?
    I don't want to loose my settings either. Someone on one site said boot to Leopard to install, but I don't want to erase my current OS or files. Others say just put the Leopard disc in and go from there. Again, I'm not sure which menu items to activate.
    Any links to step-by-step procedures for upgrading to Leopard would also be appreciated. Then I understand I have to upgrade to 10.5.2 and that may be a problem too.
    Thanks,
    Tim

    1. Prepare your system for backup:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Prepare your new external hard drive:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
    3. Create a bootable clone of your system to the external drive:
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the backup or destination volume from the left side list.
    3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    4. Click on the Restore tab in the DU main window.
    5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
    6. Select the startup or source volume from the left side list and drag it to the Source entry field.
    7. Double-check you got it right, then click on the Restore button.
    If you upgrade to Leopard I suggest you do so using Archive and Install rather than an Upgrade Install:
    How to Perform an Archive and Install
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
    You do not have to update to 10.5.2 immediately unless you want to. Software Update will present you with a number of updates that may be available. However, you can wait on these until you are satisfied everything is working as you'd expect. When you do decide to install the updates just be sure to repair the hard drive and permissions first as a precaution.

  • 20in 2 GHz Intel Core Duo IMAC

    I was just wondering is my IMAC 64 bit ? My Machine model is imac4,1 I got mine last May.

    OK yeah mine is a Intel IMAC thats what I said lol, Oh well I guess I dont have the 64bit that ***** I bought this then then came out with the better Core 2 with 1gb of Ram, and it was cheaper lol, OOO well. THanks anways

Maybe you are looking for