Can't get any camera calibration profiles to show up

I am using lightroom 5 on a windows 8 pc and can not get any camera calibration profiles to show up. I have 14 profiles for my Sony SLT-A65 in my cameraprofiles folder and a corresponding camera folder with also has these profiles. I have checked all file attributes and the only thing I see differrent from some other camera profiles is the file ownership is adminisrator instead of system. Also Photoshop does not see any camera calibration profiles either. I have done a lightroom installation repair from original disk which didn't fix. I have all my lens profiles which work fine. I have tried renaming profiles from SLT-A65V to SLT-A65 to match what shows up on displayed file information. Can't think of anything else. Can anyone help??

I have since corrected this issue. I downloaded adobe DNG profile editor and loaded the camera profiles I had and then saved them. At this point all of them showed up in Photoshop and Lightroom. Don't know what the difference was but they are seen now by my programs.
Thanks for the reply

Similar Messages

Camera Calibration profiles not showing

On Vista Business SP1, only ACR 4.4 and ACR 4.2 show in the Camera Calibration tab, in both ACR 5.3 and Lightroom 2.3.
Both
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera
and
C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Adobe Standard
are present, with entries for my Canon 40D. The profiles were showing in earlier (beta) versions of ACR and Lightroom, and, I think, in the latest version, but now are not showing.
Thanks for any help.
Dan Dill

Somehow my install must have gotten munged.
I just reinstalled PS (and so Bridge and ACR) from the CS4 distribution, applied the related updates, and now the camera profile show properly in ACR 5.3 and LR 2.3.
I should say, the reinstall and update process went without a hitch, for which I am grateful.

Camera Calibration profiles, non showing apart from basic ones.

Fairly new
to lightroom3, I shoot in raw on a 5dii, never connected the camera directly to the PC, load images via a card reader, lens correction profiles are there. But only 6 profiles for camera calibration are there. None specific to the camera. All the images are CR2 files. I am following Scott kelby's book. Am I doing something wrong. Help please.

Lightroom show only the profiles that are specific to your Camera. You should see Adobe Standard which is the Profile Adobe has created specific to your camera then there should be a number of profiles which start with the word Camera then faithful, vivid, landscape etc. Those are other profiles which Adobe created to try and match the rendition of your camera specific settings. Your camera name is not specified but the profiles that show will be the ones for you camera.

The google toolbar doesn't work at all; the bar shows, but it is blank, and i can't get any of the buttons to show. When i click on "add more buttons" nothing happens. I've uninstalled and re-intalled. I've done the safe mode thing. Using Windows 7 32-bit

This happened in the evening of March 17th. That morning it was there. i did not reboot all day or download any FF updates or other extensions that i recall. I've been wrestling with it for few days thinking on the next reboot it would repair itself. It didn't. I've spent a few hours total since then trying different things on the FF help site, but none have resolved the issue. I've enabled and disabled and re-enabled, uninstalled/re-installed, changed themes, used default theme, etc.

From the Firefox help files;<BR><BR>
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.

Camera calibration profile. i dont get the option to chose landscape

Bought myself a Fujifilm Xs1 and like with my Canon i prefer to take shots in RAW.
Now the thing is in editing in lightroom i am not get the landscape option in camera calibration >profile just Adobe Standard as if i took the shot in jpeg
any ideas ?

This is Quoted from the Lightroom Journal where the official word comes from Adobe for new functions. It was posted when LR 5.4 was released.
""Added Camera Matching color profiles (PROVIA/STANDARD, Velvia/VIVID, ASTIA/SOFT, MONOCHROME, etc.) for the following Fujifilm cameras:
Fujifilm X-A1
Fujifilm X-E1
Fujifilm X-E2
Fujifilm X-M1
Fujifilm X-S1
Fujifilm X-T1
Fujifilm X-Pro1
Fujifilm X10
Fujifilm X20
Fujifilm XF1
Fujifilm XQ1
Fujifilm X100
Fujifilm X100S
New Lens Profile Support in Lightroom 5.4""
I think it may be worth the try to install the trial of LR 5.4 and see if the profiles become available for use with LR 4.4
Just a thought out of the box not sure if it will work.
Lightroom does not provide additional profiles for all cameras they support, most of the camera models supported only have their own "Adobe Standard" profile.

HT4623 I can't get my camera to work, or my Photo Booth. Any sugestion

I can't get my camera to work,or my Photo Booth. Any sugestion

Close all apps on your iPad and reset the device.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Missing Camera Calibration Profiles in Lightroom Creative Cloud

I am missing the ADOBE SUPPLIED Nikon D700 and Olympus OM-D E-M5 camera calibration profiles in Lightroom. They were there until I had to reload the apps from CC. I looked in the forums already and haven't found any answer. I have tried to get support from Adobe through Chat and the person there had no clue what I was asking.
I found this answer on a similar question but it does not explain why the Adobe-supplied profiles are missing. To be clear, I am not talking about custom profiles.
"If you are asking about Adobe-supplied profiles, they will be installed every time you update the software so there’s no need to copy them, anywhere, and the reason for not seeing them would be that the current photo is not a raw file since most profiles are only for raw not jpg."
Can anyone help me out? Thank you.

There is no uninstaller. Just drag the app to the trash and reinstall it from the CC app. That should fix your issue. If you want to know, on Mac OS X and starting with LR 4, the profiles are installed in the app wrapper inside the Applications folder for some reason so they are hard to find. you control click on the app, select "Show package contents" and navigate to Resources > Camera Profiles

Missing camera calibration profiles (Nikon P7700)

Until recently I've been able to apply a choice of camera calibration profiles (e.g. Camera Landscape, Camera Portrait etc.) in the Develop Module to images taken with my Nikon Coolpix P7700. However, these have now vanished, and I'm only left with the option of Adobe Standard. When I view photos that I previously applied the missing presets to, I see the old preset (e.g. Camera Landscape) briefly in the Camera Calibration Profile setting in the Develop Module, but then it changes to Adobe Standard.
I think what caused this change was an upgrade to OS X 10.5.8. I haven't changed LR recently, and have been using LR 4.4. It's currently using Camera Raw 7.4; I haven't updated Camera Raw separately, although it may have been updated by OS X? I've tried upgrading to LR5.2 to see if this will fix the problem, but it doesn't.
There are no profiles for the P7700 in Application Support/Adobe/CameraRaw/CameraProfiles/Camera/ in either ~/Library/ or /Macintosh HD/Library/.
This is very weird and annoying behaviour: LR is changing the camera calibration profiles of all my images, but without warning me!
Does anyone know how I can reinstall these profiles? I've searched extensively for an answer to this, but with no luck.
Any help or suggestions would be greatly appreciated.
Many thanks.

Thanks for that Geoff.
Apologies: I did mean upgrading the OS to 10.8.5, not 10.5.8! I wasn't sure whether ACR was affected by OS X upgrades. And I am viewing RAW files.
If LR has ACR built in, do you know whether it uses the files at Application Support/Adobe/CameraRaw/CameraProfiles/Camera/ or does it get the profiles from elsewhere? Something's changed the profiles LR reads on my computer, but if it's not OS X, and since it wasn't an LR upgrade that triggered the change, then I'm stumped as to what's caused this!
If LR does use profiles at the directory above, then presumably installing new profiles there (in ~/Library/) will override the built-in ACR files?
Thanks for your help.

Where do I put Camera Calibration Profiles?

Running LR 4.2 64-bit on Windows 7 64-bit. I"m shooting with a Nikon D300.
When I look at an image, in Develop, I have a set of choices for "profiles". These include Embedded, ACR4.3, ACR 4.4, Adobe Standard, Camera D2X mode 1,2,3, Camera Landscape, Camera Standard,
Camera Vivid, and so on..............
Before I go wasting everyone's time with questions about additional profiles, is there any advantage to downloading D300 profiles from the Internet? Are they different/better than the standard ones I've listed above?
Presumig I SHOULD get additional profiles, I downloaded (among others) Matt K's "matts_nikon_profiles.zip", profiles. When expanded, these become a set of .lrtemplate files. Are these camera calibration profiles or something else? In the "Adobe Standard" folder, the files are all .dcp extension.
Anyhow, at this point I'm not even sure I've got what I'm supposed to have, so can y'all recommend a source for additional profiles (again, if there's any advantage to having them), AND tell me EXACTLY where to put the files? So far, in my rummaging, I've found references to putting them in
C:\ProgramData\Adobe\CameraRaw\CameraProfiles
c:\Program Files\Adobe\Adobe Photoshop Lightroom 4.2\Resources\CameraProfiles
and so far, nothing seems to get seen when I put them in either place...

fulltankofglass wrote:
I don't have an 'app data' folder.
Everyone has an app-data folder.
The camera profiles folder in resources directory of program files is for built-in profiles only - do not store custom profiles there, otherwise next time Lr is installed, they'll all go "poof".
Here is one easy way to find your app-data folder, and therefore the correct place to store your camera profiles:
Run the 'Camera Raw - Shared Folders' script in this free download I wrote:
http://www.robcole.com/Rob/ProductsAndServices/MiscLrScripts
You will be shown a directory, and in that directory is a folder named 'CameraProfiles' - that's where you want to put them (actually, in a subfolder of that named after your camera model - if problems do share..).
Rob

Color artifacts with A7s and A6000 files using Camera calibration profiles

I'm seeing some really obvious chroma artifacts / false colors with RAW files from either a Sony A7s or A6000 when using any of the Adobe-provided Camera calibration profiles that emulate Sony's rendering.
This seems to happen at any ISO, and is very frequent.
If I use the Adobe Standard calibration profile then things look normal, but that's might just be because it produces rather desaturated images compared to the "sony" profiles.
Prior to those Sony cameras I was using Nikon DSLRs for which I had somewhat similar issues when using the first version of the Nikon camera profiles.
Those issues got fixed when Adobe released the "v4" camera profiles.
Below are some examples without any adjustment, the only difference is the choice of camera calibration profile:
Camera Landscape:
Adobe Standard:
Camera Standard:
Adobe Standard:
Camera Landscape:
Adobe Standard:

The legacy ACR X.x profiles are no more produced nor included for newer cameras (AFAIK, since ACR 5.1/LR 2.1). The Adobe Standard is the new default starting point for these.
While I am at it....are the Canon camera profiles I downloaded for the 1Ds MKII the same as for the 5D MKII or do I have to download different one...I suspect they are the same or Lightroom wouldn't offer them to me...is that correct?
The profiles are different for each camera model, even if they share the same name in the Calibration panel. If you can see them when developing 5DII files, it means the camera-specific profiles are installed for your particular camera model (otherwise, you wouldn't see them).

Camera Calibration Profiles

Does anyone know of a plug in for Aperature to calibrate the colour profile of a camera? I have seen a process used in Lightroom with an xrite ColorPassport and software to create a colour profile to apply across a set of images to correct to a calibrated image set. Looking for an equivalent process in Aperature.

Frank Caggiano wrote:
The section after explaining that if you shoot RAW you don't need to do this does explain how to profile a camera.
Yes, though, that explanation is for using that color profile in the camera ... which Aperture is likely to ignore the profile once the image is imported and apply the canned one-size-fits-all profile that Aperture uses in the background.
What the OP is referring to, in Lightroom/ACR you have the ability to apply several canned camera calibration profiles, as well as any user created profiles. Using these profiles can fine-tune color rendition before any other adjustments are applied ... in other words it eliminates the need for processing presets for a more user preferred starting point which allows all sliders to remain at their default points ... as a bonus, profiles can be created to match color across multiple camera bodies including different models ... and even different brands ... once created they can be applied as default upon import based upon camera serial number and/or ISO as desired ...
While I much prefer Aperture ... I do find the ability to create a color rendition starting point of my own choosing quite a nice feature ... if Aperture is to be considered a "professional" app ... Apple should strongly consider adding the feature in the next iteration ... whenever that will be ...

Camera Calibration profiles for Leica M 240

Hi Forum
I'm using LR to process DNG files from Leica M 240.
I understand LR has some extra profiles ( "Camera Faithful, Camera Portrait, etc" ) for some Canon and Nikon camera models.
As under "Camera Calibration -> Profile" I can only see "Embedded" or "Adobe Standard", does it mean these extra profiles don't exist for Leica M 240 ?
Thank you all for any clarification.

Embedded is what you will always see on JPEG images. Adobe standard is the one you will see on your raw images. If you want additional profiles you will have to download the DNG profile creator and make your own. If Adobe standard is all you have then that is all Adobe is providing for your camera.

Can not get my cam to work on skype

I can not get my cam to work when using skype - any ideas? cam is working when in photo booth....

Then you have a problem with Skype. Check their forums for input.

Camera Calibration Profile for Leica D-Lux Typ 109

I have Lightroom 5.7 with Camera Raw 8.7, both supposedly the latest versions, and yet I do not see any choices other than Adobe Standard under the Camera Calibration Profile menu. I have the newly supported Leica D-Lux Typ 109, and was expecting to see some camera specific choices in the Profile menu. Am I mistaken?

Most cameras only have an Adobe Standard profile:
492 camera models have Adobe Standard profile.
166 camera models have profiles in addition to Adobe Standard, mostly Canon, Nikon, Olympus and Sony.
The only Leica model that has more than an Adobe Standard profile is the M8.

Satellite A210-11P - can't get the Camera to work

Hey
i have the Satellite A210-11P and i just can't get the Camera to work on it,
it will yurn on for two seconds and then shut itself off and 'No Preview' Appears.
Any help on this would be greatly appreciated.
Kris

Hi,
Have you tried you to reinstall/update it? Download camera assistant from [Toshiba driver page|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Remove the previous one and restart the laptop. Then, install downloaded one

Can't get any camera calibration profiles to show up

Similar Messages

Maybe you are looking for