Can't get the correct return value ?

Hi,
I'am using JDBC/ODBC to connect to a MS SQL Server 7 database. I run a stored procedure which updates a table. An update trigger however may rollback the entire transaction and issue a RAISERROR. A return value should be returned after this.
However, in my servlet, I always retrieve the return value 1 (whether the transaction was rolled back or committed). What am I doing wrong ?
Forgive me, all you experts out there, I am a beginner ...

A RAISERROR should produce an exception. Checking the return value shouldn't matter nor be possible.
What error number is being used for the RAISERROR? I tried different numbers and ended up using the standard 16. Is the trigger returning immediately following the RAISERROR? I remember problems with that, the stored proc would continue if I didn't.

Similar Messages

I can not get the correct anser

Hi, Please help me. As the following sch I can not get the correct sqrt value. if changing resistor of R1 I always get 12v direct flow output.
Attachments:
op_divider.zip ‏121 KB

Thanks for your answers. I want the sch to do the operation of square root.
1. in my sch the inverting input is DC -5v, I want to get the square root of 5?
2. In my feedback path I use a multiplier, I Originally thought it is a negative feedback?
3. it Already have ground in the sch, I do not understand that you say "did not ground the scope"?
Thanks again, Could you give me the further pointing. if possible Could you give me a correct sch.
(in fact, I get the sch from a rough sch in a textbook(the rough sch not for multisim). I just give the values for the all components)

JRockit_160_05_R27.6.2-20 can not get the correct os name for windows 2008

JRockit_160_05_R27.6.2-20 can not get the correct os name for Windows Server 2008 SP1 using System.getProperty("os.name").
System.getProperty("os.name") will return Windows Vista instead of Windows Server 2008 when running on Windows Server 2008 SP1. Is it a bug of this jdk?
I tested it on Sun JDK 1.6. It returns the correct name Windows Server 2008.
Any suggestion will be welcomed. Thanks in advanced!
Edited by: user4516182 on May 13, 2010 12:59 AM

Staffan, thanks for your update.
Do we have a workaround for it or fix it in new release?

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

I have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?

I have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?

Apple has announced a Thunderbolt to Firewire adapter, but not yet given a release date.

Hi, can you help? My emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

Hi, The emails that I have received show the date received as either today, yesterday or July 28. How can I get the correct date received?

That's very scary. They might do it, but I personally have never had Apple contact me re id's except on their site when signing in. I suggest you DO NOT respond until you have a phone conversation with Apple security. They can verify if they sent you the e-mail and why.
While it's very possible it's true,again, I suggest you not respond until you speak to someone at Apple. I've often read here that when people sign in they are not allowed to because "someone else has used the id" type of statement.
Also, you should be able to go to the app store and see what apps you have downloaded.
Though it could have been a free app, have you checked to see if any were bought with your id account?
I've gotten these types of e-mails from places like USPS and FedEx which look amazingly authentic and were from their website. I also received an odd e-mail from my cousin in Ireland last year that clearly was not from him. It was also sent to others in his family in Ireland. I e-mailed him that I only opened it because it had a .ie, but suggested he change... Days later I received mail from 'him' - same name, but at yahoo.com.
Again, I would call Apple. You can also report it at [email protected], but I would not settle for that given your situation. If nothing else, call Apple sales (sales depts. anywhere answer fast) and ask them to transfer you to security. Apple will not want anybody accessing their name, and while it's unlikely, it's not impossible that it is someone phishing.
Hope this helps and can you let the support community know your results by posting on this thread when you're done? Thank you.
Hope this helps.

How can I get the correct Ship To (KNVP-KUNNR2) for a Sales Document?

I am trying to generate a report that will (among other things) display the Ship To ID and Name for a given Sales Document. I know the following information:
VBAK-VBELN - Sales Document
VBAK-VKORG - Sales Org
VBAK-VTWEG - Distribution Channel
VBAK-SPART - Division
VBAK-KUNNR - Sold To Party
I know that the table KNVP will return a list of Ship-To Customer numbers (KUNNR2) for a Sold-To Customer (VBAK-KUNNR) if I also filter by VKORG, VTWEG, and SPART (using SE16N). What I don't know is which one of the returned values is being used in a particular Sales Document. The customer in question has 29 Ship-To locations. How do I find out which Partner Counter (KNVP-PARZA) the Sales Document uses? I don't know where that value would come from. Once I can get the correct Ship-To Customer Number, I should be able to search the table KNA1 by WHERE KUNNR = KNVP-KUNNR2 and return KNA1-NAME1 for the Name of the Ship-To location.

For a sales document? Use VBPA with PARVW = 'WE'. Also, use the ADRDA field to determine whether the address on the document has been manually changed. In any case, you can use one of the many address management functions or just ADRC directly to get the name, address, etc., using the ADRNR field from VBPA or if the address is from the customer master, KNA1.

How can i get the correct text from the url which has the mulitp-languages?

hi, all
i built a application and deployed it on sun application server 8.1. when i request a url which include some multi-languages (for example http://xxx.com/servlet?value=XXX. the 'XXX' may be simply chinese. ), i got the ??? instead of the correct text. how can i do it? in tomcat server, i can set the URIEncoding=GBK to get the correct code in server.xml. how can i do it in sun app server?
thanks.

Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com)

I can't get the correct node (a real beginner)

I have an XML file which looks like this:
[code<lawyer>
 <Country>Singapore</Country>
 <Company>Allen & Gledhill</Company>
</lawyer>
<lawyer>
 <Country>Singapore</Country>
 <Company>Allen & Gledhill</Company>
</lawyer>.
</Lawyers>
But I can't get the right node names and values.
Here is my code:
File file = new File("lawyers.xml");
DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
Document doc = builder.parse(file);
NodeList nlLawyers = doc.getElementsByTagName("lawyer");
for (int i = 0; i < nlLawyers.getLength(); i++) {
 Element elLawyer = (Element) nlLawyers.item(i);
 NodeList columns = elLawyer.getChildNodes();
 for (int j=0; j<columns.getLength(); j++) {
 Node col = columns.item(j);
 String colName = col.getNodeName();
 String colVal = col.getNodeValue();
 System.out.println(colName + ": " + colVal);
}What I would like to print out would be something like this:
Country: Singapore
Company: Allen & GledhillBut I am getting extra nodes and cannot get the text values. Here is the output I am getting:
#text:
Country: null
#text:
Company: nullI don't understand this output at all. Please help me get the list of node names and values?
Thank you.
-Jeff

It seems that the #text nodes represent the whitespace between the formal nodes. Also, the nodes that I want to extract have a NodeTypeValue of 1. Once I had determined that I had the correct node, I had to get its child node to get the text. Here is the final code:
File file = new File("lawyers.xml");
DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder();
Document doc = builder.parse(file);
NodeList nlLawyers = doc.getElementsByTagName("lawyer");
for (int i = 0; i < nlLawyers.getLength(); i++) {
 lawyer = new Lawyer();
 Element elLawyer = (Element) nlLawyers.item(i);
 NodeList columns = elLawyer.getChildNodes();
 for (int j=0; j<columns.getLength(); j++) {
 Node col = columns.item(j);
 if (col.getNodeType() == 1) {
 String strColumn = col.getNodeName();
 Node txt = col.getFirstChild();
 String strValue = txt.getNodeValue();
 System.out.println(strColumn + ":\t" + strValue); }
 } // for each column
} // for each lawyer

Can not get the proper angle value

Hello,
I have drawed a circle on the canvas control, and want to capture an arbitrary point in the circle, where the point's coordinate is determined by the "GetRelativeMouseState()" function. The whole idea is this: once click in the circle, I can get the coordinate of the clicking point by using "GetRelativeMouseState()", then drawing a line from the circle's midpoint to the point, expecting to calculate the angle between the line and the X axis. I post the sketch to explain how the process is treated :
the coordinate of the midpoint is (width/2, height/2), so if want to calculate the theta angle, I can get the formular: theta = atan((height/2 - yCoor) / (width/2 - xCoor)), there is a strange condition: if the line is near to the X axis (in fact, the line turn to angle exceed 135 degree (as to the counterclockwise) but there is a distinct angle between the X axis, the theta), I always get a zero angle value(the theta).
Please help whether the "GetRelativeMouseState()" can provide an exact position?
David

How are you calculating the angles? With some basic trigonometry and atan2 () function I always get the correct angles: take a look at the attached canvas.prj sample which I modified adding the necessary functions (click Draw Circle and check Angle drawing: when clicking on the canvas the program will draw the line and calculate the corresponding angle)
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
canvas.zip ‏10 KB

Can't get the internal table values

hi all,
i have created a report in which i have DISPLAY EKPO-BANFN and EKKO-EBLEN.For this reason i have created an internal table gi_final,in which my values of both table are coming through.Following are the codes and structure of internal table:
BEGIN OF gi_final OCCURS 0,
       matnr LIKE ekpo-matnr,
       ematn LIKE ekpo-ematn, "Material Number
       txz01 LIKE ekpo-txz01, "Mareial Description
       ktmng LIKE ekpo-ktmng, "Quantity
       netpr LIKE ekpo-netpr, "Rate
       anfnr LIKE ekpo-anfnr, "RFQ No.
       banfn LIKE ekpo-banfn, "Purchase Requisition Number
       ebeln LIKE ekko-ebeln, "Purcahse Order
       ekorg LIKE ekko-ekorg,
       bstyp LIKE ekko-bstyp, "Purchasing Document Category
       submi LIKE ekko-submi, "Collective Number
       lifnr LIKE ekko-lifnr, "Vendor Number
       bedat LIKE ekko-bedat, "Purchase Order Date
    END OF gi_final.
select ekko~ebeln ematn txz01 ktmng banfn
from
    ekpo
    inner join ekko on
    ekpo~ebeln eq ekko~ebeln
into
    corresponding fields of table gi_final
where
    ekko~ekorg in s_ekorg and
    ekko~ebeln in s_ebeln and
    ekko~submi in s_submi and
    ekko~lifnr in s_lifnr.
    READ TABLE gi_final WITH KEY ebeln = gi_final-ebeln.
    MOVE gi_final-banfn to gi_detail-banfn.
    MOVE lv_netpr     to gi_detail-netpr.
    MOVE gi_final-ematn TO gi_detail-ematn.
    MOVE gi_final-txz01 TO gi_detail-txz01.
    MOVE gi_final-ktmng TO gi_detail-ktmng.
Probelm is that when i execute it with Debugger my internal table can't get the values of EBELN and BANFN.
Thanks & Regards,
sapabappk
Edited by: sapabappk on Sep 26, 2010 10:32 AM

HI ,
BEGIN OF gi_final OCCURS 0,
       matnr LIKE ekpo-matnr,
       ematn LIKE ekpo-ematn, "Material Number
       txz01 LIKE ekpo-txz01, "Mareial Description
       ktmng LIKE ekpo-ktmng, "Quantity
       netpr LIKE ekpo-netpr, "Rate
       anfnr LIKE ekpo-anfnr, "RFQ No.
       banfn LIKE ekpo-banfn, "Purchase Requisition Number
       ebeln LIKE ekko-ebeln, "Purcahse Order
       ekorg LIKE ekko-ekorg,
       bstyp LIKE ekko-bstyp, "Purchasing Document Category
       submi LIKE ekko-submi, "Collective Number
       lifnr LIKE ekko-lifnr, "Vendor Number
       bedat LIKE ekko-bedat, "Purchase Order Date
    END OF gi_final.
select ekko~ebeln ematn txz01 ktmng banfn
from
    ekpo
    inner join ekko on
    ekpoebeln eq ekkoebeln
into
    corresponding fields of table gi_final
where
    ekko~ekorg in s_ekorg and
    ekko~ebeln in s_ebeln and
    ekko~submi in s_submi and
    ekko~lifnr in s_lifnr.
    READ TABLE gi_final WITH KEY ebeln = gi_final-ebeln.
    MOVE gi_final-banfn to gi_detail-banfn.
    MOVE lv_netpr     to gi_detail-netpr.
    MOVE gi_final-ematn TO gi_detail-ematn.
    MOVE gi_final-txz01 TO gi_detail-txz01.
    MOVE gi_final-ktmng TO gi_detail-ktmng.
Why you are reading gi_final table and comparing same table field gi_final-ebeln ?
how is gi_detail table declared   ?
just do like this
loop at gi_final .
    MOVE gi_final-banfn to gi_detail-banfn.
    MOVE gi_final-ematn TO gi_detail-ematn.
    MOVE gi_final-txz01 TO gi_detail-txz01.
    MOVE gi_final-ktmng TO gi_detail-ktmng.
append gi_detail .
clear gi_detail
endloop.
and From where you are getting value of    lv_netpr
MOVE lv_netpr     to gi_detail-netpr.
then you will get data in gi_detail
Regards
Deepak.

How can i get the h:selectOneRadio value with javascript

Hi all.
I have this code
<h:selectOneRadio id="color" style="font-family: Arial;font-weight:lighter;font-size: 12px" onclick="showColor()" >
<f:selectItem itemLabel="RED" itemValue="1" />
<f:selectItem itemLabel="BLUE" itemValue="2" />
</h:selectOneRadio>
And javascript function is
function showColor()
var tipoRelacion = document.getElementById("form:color").value;
alert("color" + tipoRelacion);
And what i get is that color is undefined. How can i get the value of the selected radio?
Thanks a lot

you just need to pass this while calling javascript function
check this-
<h:selectOneRadio id="color" style="font-family: Arial;font-weight:lighter;font-size: 12px" onclick="showColor(this)" >
<f:selectItem itemLabel="RED" itemValue="1" />
<f:selectItem itemLabel="BLUE" itemValue="2" />
</h:selectOneRadio>
And javascript function is
function showColor(obj)
var val = obj.value
alert("color" +val);
}

Pro: in RF Development how can i get the scaned barcode value to Tcode

Hi,
I need to develop a custom RF settings for Scaner. I have gone through the SAP Provided documentation. SAP Has given in report we need to call Screen.
Every thing is clear for me... creating report, screen, triggering messages, customization.. etc. My question is what are naming conventions i need to use. it's custom Transaction. When ever we scan the Barcode, how that value is passing to initial screen of my Program. how can i keep it in SAP Memory. once after getting the value it's anormal transaction. i can code for that. how can i get the scaned value.

Hi!
Most (of my) customers use their scanners in keyboard simulation mode. Than it's like typing the number (or character) of the barcode. -> You need an input (char) field. Most (all?) scanners can be programmed to add a constant at the end -> use 'enter' and you get your PAI triggered.
Then scanning is same as typing 11 (or 13 or whatever) numbers on keyboard.
Other option would be, using scanner in native mode. But then you need a kind of device driver, which calls SAP via RFC. Possible, but more complex (because of missing alternative 'keyboard' in case of trouble).
What happens, if scanner can't read barcode, but user can identify numbers below -> you need anyway char-input field reacting on keyboard, too.
Regards,
Christian

How can i get the correct text from a string like it show in the original source with the quotation marks in the right place ?

The text is in hebrew so the problem is that sometimes the quotation marks not in the right place.
For example i have this text: תווית
על בגד: ''תן לאישה לכבס. זה תפקידה''
This is the source original text you can see the quotations marks and they are not in the right place and all i did is copy paste.
And this is a screenshot of how this text looks like in the website in the original:
You can see now where the quotations marks should be.
Now this is how i'm using the text in my program:
First of all i'm using a webclient to download the page from the website and i'm also encoding it to windows-1255 since it's in hebrew.
using (var webClient = new WebClient())
webClient.Headers.Add("user-agent", "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.0.3705;)");
byte[] myDataBuffer = webClient.DownloadData("http://rotter.net/scoopscache.html");
page = Encoding.GetEncoding("windows-1255").GetString(myDataBuffer);
Then i'm extracting the places i need by reading the html file lines and parsing the right text and it's link.
string loc;
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
List<string> lockedLinks1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
lockedThreads = new List<string>();
lockedLinks = new List<string>();
Regex textRegex = new Regex("ToolTip.*?(?=','<)");
string[] fall = File.ReadAllLines(filename);
for (int i = 0; i < fall.Length; i++)
if (fall[i].Contains("http://rotter.net") && fall[i].Contains("locked")||
fall[i].Contains("locked_icon_general") ||
fall[i].Contains("locked_icon_anchor") ||
fall[i].Contains("icon_anchor") ||
fall[i].Contains("locked_icon_fire") ||
fall[i].Contains("locked_icon_sport") ||
fall[i].Contains("locked_icon_camera") ||
fall[i].Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(fall[i + 2]))
if (m.Value.Contains("><b"))
loc = m.Value.Replace("\"><b", string.Empty);
lockedLinks.Add(loc);
string txt = fall[i - 1];
string text = textRegex.Match(txt).Value.Replace("ToolTip','", String.Empty);
if (text.Contains("’"))
text = text.Replace("’", string.Empty);
lockedThreads.Add(text);
Already here on the List lockedThreads you can see the quotation marks not in the right place as in the original:
After i'm parsing the text and links and adding them to the Lists in another class i'm doing a comparison using this Lists:
foreach (List<string> l_branch in ListsExtractions.responsers)
TreeNode l_node = treeView1.Nodes.Add(l_branch[l_branch.Count - 1]);
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
l_node.ImageIndex = 0;
l_node.SelectedImageIndex = 0;
for (int l_count = 0; l_count < l_branch.Count - 1; l_count++)
TreeNode l_subnode = l_node.Nodes.Add(l_branch[l_count]);
if (ListsExtractions.lockedThreads.Contains(l_subnode.Text))
l_subnode.ImageIndex = 0;
l_subnode.SelectedImageIndex = 0;
The problem is in the line:
if (ListsExtractions.lockedThreads.Contains(l_node.Text))
When it's getting to the line with the quotation marks it's never equal.
Now there are more quotation marks.
In general the problem when comparing both text if it's having quotation marks it's not the same.
So i have two options:
1. To fix it somehow so the quotation marks will be the same in both variables when comparing and also the same like in the original as they show in the html page.
2. To remove the quotation marks from both variables.
What should i do ? And how ? I was prefer to use the original quotation marks like in the original since they have a meaning in the place they should be. The question is how can i do it ?
This is example of the block from the html file where the text with the quotation marks is:
<TD ALIGN="RIGHT" VALIGN="TOP"> 9418 </TD></TR><TR BGCOLOR="#eeeeee">
<TD ALIGN="RIGHT" VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();" onmouseout="deActivate()" href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/new_locked_icon_general.gif" border="0"></a></TD><TD ALIGN="right" VALIGN="TOP" WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=189696&forum=scoops1">
תווית על בגד: ''תן לאישה לכבס. זה תפקידה''
</a></TD>

Ok, it is unclear on what is happening here.
Are you saying that when the webclient gets the data that it is not honoring the quote characters? Or the processing of the data buffer is causing issues?
This is what I see the of your example text which is trying to be parse out:
<a onmouseover="EnterContent('ToolTip','תווית על בגד: ’’תן לאישה לכבס. זה תפקידה’’','כתב: Spook בתאריך: 08.03.15 שעה: 22:11 מחאת טוויטר קמה בעקבות תוויות שוביניסטיות שהדפיסה חברת אופנה באינדונזיה לפיהן תפקיד הכביסה מוטל על האישה. החברה התנצלה אך כנראה רק עשתה רק יותר נזק לע...'); Activate();">";
It appears to me that the escapes `’` does not have matching `“` anywhere within the tooltip. So it appears that the page properly places left quotes in when processing the page, but the raw html has broken text.
Hence a garbage in, garbage out situation.
William Wegerson (www.OmegaCoder.Com)

Can't get the correct answers to my security questions

Can you help me get passed the security questions?? I can't seem to remember the correct answers

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Can't get the correct return value ?

Similar Messages

Maybe you are looking for