Can't install on my 3 computers; get a "hash mishmash" error

I've tried to install mountain lion on 3 of my Macs and it stops during installing with a "hash mishmash" error...how can I fix this?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Can i install photoshop on 2 computers

    can i install photoshop on 2 computers?

    No problem. You can.
    For example one for a home computer, another for a travel laptop, or at work.
    What you cannot do is have someone else use it on your laptop, while you use it on you home computer.
    Gene

  • Can you install product on multilpe computers?

    can you install product on multilpe computers?

    Creative Cloud Help | Creative Cloud / Common Questions
    "Can I use the software I download from Creative Cloud on more than one machine?
    Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine."

  • I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

    I have MacBook Pro 13-inch with retina early 2013 can I install windows on it because I tried but an error appear ( an error occurred while copying files)

    If you are on Yosemite, and have a CoreStorage volume (the default), it is not visible on the Windows side. The Apple HFS driver cannot read CS volumes.
    You can verify this by running the following command in OSX Terminal.
    diskutil cs list
    If you get any output, such volumes will not be visible.
    As a work around, if you really need it, check the 'Revertible' value. If it is yes, you can revert it to HFS+ by using the following command
    diskutil cs revert
    Here is the syntax for the command. The LVUUID parameter can be seen as a long string for your Logical Volume. Do not use the Logical Volume Group or any disk UUIDs. If you need the exact command, please post the output from the diskutil cs list command?
    diskutil cs revert
    Usage:  diskutil coreStorage revert
            MountPoint|DiskIdentifier|DeviceNode|lvUUID
            [-stdinpassphrase | -passphrase [passphrase] | -recoverykeychain file]
    Convert a CoreStorage logical volume back to its native type.
    The file system must be mounted and resizable (i.e. Journaled HFS+).
    Ownership of the affected disk and a passphrase (if encrypted) is required.

  • I want to install Lightroom 5, but I get this message an error occurred of the installation of assembly component (5C21D397-1DA5-3749-8C1F-165F21DE9E3E) HRESULT: 0x8007054F.

    I want to install Lightroom 5, but I get this message an error occurred of the installation of assembly component (5C21D397-1DA5-3749-8C1F-165F21DE9E3E) HRESULT: 0x8007054F. I have Windows 7.

    Error 1935 | Assembly component Microsoft.VC80.CRT | Install | CS4, CS5, CS5.5 products | Windows

  • I can not install creative cloud on OS X 10.9. Error Code 1

    I can not install creative cloud on OS X 10.9. Error Code 1

    Error "Failed to Install" Creative Cloud Desktop application

  • I can't access the app store - I get the following messages - error 1004 or 100 or 4 or unknown error - help!!!

    I can't access the app store - I get the following messages - error 1004 or 100 or 4 or unknown error - help!!!
    I've disabled the firewalls, the virus protection, the application protection - nothing helps.

    I'd maybe try doing a search for Safari on your iPad first (swipe to the left to search). If it shows up in that search you can go to Settings > General > Reset and choose 'reset home screen layout' which will put it back where it would be by default.
    All else fails? Restore it.

  • I can't install update 11.0.3 getting error message 103

    I can't install itunes update 11.0.3. I get error message 103

    Troubleshooting iTunes installation on Mac OS X
    See if this helps.

  • If I upgrade Cs5 to CS6 can I install it on two computers like my CS5 is?

    I purchased CS5 before CS6 came out and the version I have (suite? individual?  I can't tell which it is from the website or from the box my CD came in) let me install it on two computers.  I would like to upgrade to CS6 but would like to be able to upgrade both versions.  I took online courses for CS5 and there are now courses for CS6 available.  I can't find my answer anywhere after searching for a couple of hours.  I can purchase the upgrade but there is nothing to say if I can upgrade both the computers.  Does the upgrade allow for upgrading two computers?
    Message was edited by: Margaret Ernsberger
    Edited to include question

    Hi Margaret,
    According to EULA you can install it on 2 machines, provided you are not using them simultaneously.
    Thanks

  • If I purchase Lightroom 5 can I install on two different computers?

    If I purchase Lightroom 5 can I download onto two different computers?

    Provided they're both for your use, yes.

  • I can't install itunes 10.7 on windows.  Schema.strings error message

    I cannot install itunes 10.7.  All I get is an error message which reads
    Error writing to file: C:\Programme Files\Common Files\Apple\Mobile Device Support\SyncServices\Schemas\Bookmarks.synchschema\Contents\Resources\fi.lproj\ Schema.strings Verify you have access to that directory.
    The schema.strings file is in the location required but I still can't install.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Can't install photoshop cs6 on brand new iMac - "Media db error: 18"

    At my company we recently hired a web designer – given his insistence on using the Adobe software, we decided to give Photoshop a try.
    We downloaded a trial version and tried to install it on the brand new iMac (no previous installations of adobe stuff) we just bought for the new desigher, but... it's not even installing!
    The installation process halts at around 2% and an error screen appears which gives generic instructions ("restart your computer and retry") and points to a log file where one can read "Media db error: 18".
    Of course we tried restarting the computer, cleaning up ~/Library, re-downloading the installer... no good – we then downloaded and run an adobe cleanup utility... still no good.
    Some people on the internet report they have the same problem... we found several questions on the matter, but no answer (besides "restart your computer" and other generic stuff that we tried and does not work).
    We then called Adobe support (Italian support) and they told us they don't give support for trial versions, like we should sight unseen buy a (pricey!) software we can't even install! .
    Can anyone here help?

    Thanks for your help!
    No, no beta or previous installations of any Adobe products – we are trying to install to a brand new iMac (just bought last week from the store): it has the latest version of everything (Os: Lion 10.7.4)
    Is there any debug switch I can turn on on the installer to get further information on what's going wrong? ("media db error" is a somewhat laconic error message)

  • Server manager hangs on collecting data, i can't install/uninstall any applications, mmc works on random, no errors in any logs

    Hi, ive been searching around for for 4-5 hours on google and here and I'm turning a bit desperate
    I rebooted the server today, and after that it just hangs on collecting data, mmc stuff works on random, I got evenviewer open, and checked system and application, but it only showed exchange alerts etc, according to itself, everything is fine, which is it not, I can't goto control panel, can't install/uinstall software, cant run windows update, can't connect via RDP etc.
    I tried misc solutions I found, like this
    1. Click Start->Run...->type msconfig and press Enter
    2. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
    3. Click Startup tab and Disable All startup items
    4. Click OK and choose Restart
    but msconfig just hangs when I click OK.
    server is a DL380G5 with 64 bit

     
    Hi,
    First I would like to confirm the following points:
    1.    Had any changes been made on the computer before the issue began to occur, such as an installation or upgrade?
    2.    Does any error message appear or does it just hang when opening Control Panel, install/uninstall software, run Windows Update, connect RDP?
    3.    Have you installed any anti-virus programs on the computer?
    First let’s delete the Server Manager cache files in C:\Windows\System32\ServerManager\Cache.
    If it still hangs, I suggest booting into Safe Mode.
    Please restart the computer, keep pressing F8 and enter Safe Mode.
    Does the hanging issue also occur in Safe Mode? If not, let’s try the steps below in Safe Mode again:
    1. Click Start->Run->type msconfig and press Enter.
    2. Click Services tab and select Hide All Microsoft Services and Disable All third party Services.
    3. Click Startup tab and Disable All startup items.
    4. Click OK and choose Restart.
    What’s the result in Normal Mode now?
    If the issue persists, please boot into Safe Mode and run your anti-virus programs perform a complete virus scan.
    If the issue still occurs after scanning for viruses, please send the System Inforamtion to me for further research:
    1. Press Start, type in msinfo32 in the Start Search bar and then press Enter.
    2. Choose Save from the File menu and save it as an NFO file.
    3. Find the file, right-click on this file, click "Send To", and click "Compressed (zipped) Folder".
    4. Upload the compressed file to me from the following site:
    https://sftus.one.microsoft.com/choosetransfer.aspx?key=3e32f38f-0e6a-4b3a-8d5c-8ad6d50df5ef
    Password: gSvd99ic_EhP6D
    Hope it helps.
    Tim Quan - MSFT

  • I can't install itunes on my computer : I have always an error.

    Hello everybody !
    I don't know why, but the setup program of iTunes can't install iTunes : he say always : "iTunes program installation was interrupted".
    Please help me !

    Hello NitroN1ck
    All my programs were closed.

  • How can I install Photoshop Elements? I get error 0x80070BC9 every time I try to install in Win 8.

    Every time I try to install Elements I get the error indicated. Thenh the intall program backs out the install. Any help you can give would be appreciated. I am running WIN 8 with all updates applied.
    Thank you very much.

    Hi jhboston1,
    Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html and let us know whether it worked.
    Regards,
    Romit Sinha

Maybe you are looking for