Can't launch debugger

Hello,
I can't launch the debugger anymore in NWDS sp13. When I do I get the follwing error:
Exception occurred during launch
Reason:
Source locator does not exist: org.eclipse.jdt.debug.ui.javaSourceLocator
I was debugging fine last night before shutting NWDS down normally.
I've searched NDS and SAP Notes but haven't found any solution for this.
Any help would be greatly appreciated.
Thanks
David.

Solved it.
This morning I had accidentally started two instances of NWDS.
Once they both came up I closed one instance but left the other running. When I tried to debug I got the error.
After that I tried restarting NWDS, rebooting PC, rebuilding my project and redeploying as well as recreating the debug configuration with no luck.
Finally, I deleted the .registry file from the workspace/.metadata folder and restarted NWDS.
That fixed it.

Similar Messages

Jdeveloper -- Can't launch debugger

WE have installed JDeveloper on several machines without any trouble. However, upon installing on an IBM T23, running WinXP, the debugger simply refuses to start. Other XP boxes work.
Our code compiles with 0 errors, 0 warnings -- but when we attempt to debug, once the compilation is complete nothing further happens.
Also, we have noticed that running InstallOJVM <j2sepath> freezes the DOS prompt...
Any ideas?
Thanks --
Laurence

Hi Laurence,
I'm not familiar with the IBM T23, but it sounds like it doesn't like OJVM!
What JDK (j2se) are you using? It is from Sun? Is it from IBM? What version is it?
I think InstallOJVM works with the JDKs from Sun.
Can you use the JDK that comes with JDev?
If you want to use the JDK which doesn't support OJVM, you can try debugging without OJVM. Just choose a different JVM for your project. This is set in the Project Settings dialog, on the Runner panel. Be aware that not all JVMs provide good debugging support. We have had good results when debugging with Sun's JVMs (hotspot client, server, and classic). We have had bad results with JVMs from other vendors.
-Liz

Can't launch Safari due to error message

I can't launch Safari anymore. It says it is missing some important resources and I have to reinstall Safari. I have done so, but it still does not work.
Here is the error message;
The procedure entry point SQLite3_wal.checkpoint could not be located in the dynamic link library SQLite3.dll.
Can someone please help me? I have rebooted my computer, uninstalled Safari and reinstalled it without any luck.
Thank you very much

Just so you are aware, Apple no longer suports Safari for Windows.
If you don't want to use IE, try Firefox for Windows > Mozilla Firefox Web Browser
Much more user friendly than Safari.

Can not launch lightroom says error when reading its preview cache

I can not launch Lightroom is puts up a error message that says it encountered an error when reading its preview cache and goes in to a loop that keeps closing the program
I have restarted my comp 4 times same this each time
I can't find any trouble shooting and when I try and download lightroom again it just puts me back at the creative cloud desktop which I can't click in anything

You need to delete the preview cache. LR will automatically create new previews.
Read here and here are the locations. Don't touch the *.lrcat file.

Can't launch color after upgrading to OS 10.5

I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

Click here and follow the instructions.
(46092)

How can I Launch a Java application that I have written using an icon

I have just finished writing a Messaging system like Ms Outlook written completey in Java. To run my application , I would normaly type: java and then the class containing the main method eg java LogonFrame.
How can I launch my application by just clicking on an icon ?.
How can I also package and install this application the way most conventional application are packaged and installed. Do we have a sort of "java Installer" ?.
Thank you.

Just make a .bat file. Open notepad, type something like
@echo off
javaw -classpath %~d0%~p0 Package.MainClass %1
Now make a shortcut to this file. Rightclick the shortcut and select start in "minimized". Thats it...
Nille

Canon MX870 will print wirelessly but will not scan and can't launch EX navigator

My laptop recently crapped out on me the hard drive failed. It's an old Macbook pro vintage with 4gig memory and running OS X maverics. After I got a new hard drive put in and restored my computer using a time machine backup I noticed the Tech had gone ahead and installed a newer operating system 10.9.2 and now I cannot get my Canon pixma MX870's software to work. After going to the Canon site and downloading newer drivers and wrangling with it for three hours I finally was able to get it to print wirelessly somehow, don't ask me how. But it will print wireless however it still will not scan even if I use image capture it sees no printer available and the ex navigator software keeps showing an error message it cannot launch! How bogus! Macs have always just worked period. No problem but now even when I go back to my old install disc for the Canon pixma MX870 it says that the software is not supported by this operating system .....REALLY... this printer is only about three years old! I'm shocked that apple could actually go ahead and make new versions of maverics that don't support printer software from two years ago..... REALLY you're kidding right! Whats next you won't support software from two months ago! I guess we have to just buy a new printer every month.
This machine is starting to remind me of a Windows laptop what a nightmare. Jobs must be rolling in his grave. This is just utterly pathetic. This is the beginning of the end for Apple. I've always been impressed with how easy it is to use apple stuff but this is the second time I've updated my operating system only to find I have to go through **** just to get the freakin' printer to work. Come on guys somebody show me an easy fix here and if any body says it's the printer companies responsibility to update their drivers and software I think I'm going to puke. I have already downloaded the newest Canon software for the MX870 and it can't launch I was able to get the printer to print but can't get the scanner to work and the solutions menu is now useless.

Well you are right Steve my complaint is with Canon for not making it easier to install their necessary updates if you upgrade your OS system but it seems that when Apple is constantly making new upgrades available they might want to add in the heads up "OH by the way, if you install this new OS it's likely your printer won't work any more if it's more than three years old." along side the constant "Updates are available for your computer" they should really have it read "Updates are available for your computer, proceed at your own risk" No I'm sorry the whole system is geared towards making people get so frustrated that they eventually give up and buy a new printer. I'm not sure what 5 hours of my time is worth but I am sure that if were getting paid by the hour it would be enough to buy a new Canon comparable to the MX870. So by the way if other people are having this same problem, which of course thousands of them are, the solution is first download the newer driver, then download the new wireless setup assistant and then figure out how to use it (good luck with that), it took me about two hours just to find the access points on the printer and to be honest I just got lucky eventually. Then you must download the newer "Scan Gear" software if you want to scan. But it seems that the new "Scan Gear" software got my whole solutions menu to start working again so there you go, you can be a white night for somebody else who is having this same problem. I must admit that after wrangling for hours I continued to go back to the forums and eventually found a link to the canon software update page provide by some very nice girl who was very helpful for some other guy and the link took me to the same page I had been to several times already but I then downloaded the "Scan Gear" software and was up and running again. So thank you to that nice girl and in the spirit of her helpfulness I offer this to the thousands of other poor bastards that cannot get their MX870 to scan
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_s eries/pixma_mx870#DriversAndSoftware
Go there and download the "Scan Gear" software that is for OS 10.9

Can't launch iTunes due to previous version of QuickTime installed

I installed an older version of QuickTime, now I can't launch iTunes anymore. In Control Panel, I have QuickTime 32--version 2.11.57 listed. I did everything in the document http://discussions.apple.com/thread.jspa?messageID=3366434&#3366434
but nothing has worked. I can't seem to uninstall the old version of QuickTime. When I run QTInstaller713.exe I get an error message about "Can't install because a newer version is already installed"
Sony Vaio VGN-S260 Windows XP

There are no QuickTimes listed in the Add/Remove list. I see it listed in the Control Panel where there is a QuickTime and a QuickTime 32 (v2.11.57). I also see it in Start > Programs > QuickTime. When I click on that I get the message: "This action is only valid for products that are currently installed."

Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.

Can't launch itunes due to the following error; The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaKey could not be located in the dynamic link library AVFoundationCF.dll.

Hey bcolden,
I would try uninstalling and reinstalling following the directions in here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section in particular contains important information in the uninstall process:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Best,
Delgadoh

Can't launch Safari after Software Update

I can't start Safari anymore and I don't know what to do. In short, click on the dock and no bounce. Double-click on the icon within Applications and it doesn't launch either. These problems, I'm guessing are a result of the combination of objects delivered by Software Update yesterday. Based on the log below, I installed the following:
2006-05-29 22:05:53 -0700: Installed "Pages Update" (1.0.2)
2006-05-29 22:05:58 -0700: Installed "Apple Intermediate Codec" (1.0.1)
2006-05-29 22:06:12 -0700: Installed "Keynote Update" (2.0.2)
2006-05-29 22:06:52 -0700: Installed "GarageBand Update" (2.0.2)
2006-05-29 22:07:42 -0700: Installed "iPhoto Update" (5.0.4)
2006-05-29 22:08:04 -0700: Installed "Java 1.3.1 and 1.4.2 Release 2" (2.0)
2006-05-29 22:09:01 -0700: Installed "QuickTime" (7.1)
2006-05-29 22:09:43 -0700: Installed "iTunes" (6.0.4)
2006-05-29 22:10:02 -0700: Installed "iPod Updater 2006-03-23" ( )
Additional problematic behavior includes:
(1) other applications saying OS X is not 10.3.8 or higher
(2) can't launch Software Update from the Apple menu or from the "About This Mac" window
(3) can't see the system version in "About This Mac" (shows the serial number instead)
(4) can't run a bunch of other apps (Dashboard, iMovie, iChat, Sims 2 University)
Any clues? Am I in the right forum?
iBook G4 Mac OS X (10.4.2)

(3) in About This Mac click on the serial number and it should cycle through the Mac OS version, build, and serial number. Run Repair Disk Permissions then run Software update again. There might be other updates available. After each update run Repair Disk Permissions.

Can't launch safari anymore.

I can't launch safari anymore. Not sure when the problem started. When I click on the icon, I get a message that says "safari.app is not supported." I installed OS X 10.5.3 today, and the problem is still there. Any suggestions?

The only thing I can remember doing in the last few months (since I last used Safari) was the regular software updates, including upgrading to Leopard from 10.3. I am pretty sure I used Safari successfully after upgrading to Leopard, but I'm not sure.
I also synched a palm device using Missing Sync in the interim (since last using Safari).
BTW, you can't imagine how frustrating it is to try to fix the problem without a usable web browser

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

Z10 can't launch apps a month after 10.3 upgrade

The device boots up fine, but troubles start right away: Picture Password doesn't work, the phone falls back to plain password entry. None of the apps can launch. When I try, the launching animation plays for a few milliseconds, with the program's tile appearing on the home screen and sometimes starts zooming to cover the screen. If the animation lasts long enough, I can see the loading screen, but at that point it always vanishes. The more apps I try to launch, the faster they disappear. There's two exceptions: The help app always stays open for longer, but it never get past the splash screen. In a testament to RIM's work, the phone dialer app still works. It launches and can make phone calls. The call log is empty, and trying to see the contacts tab causes it to hang. It's comforting that despite the mess my device is in, I'd still be able to make an emergency call. I can slide down from the top of my device to see the option pane. All the toggles work, like brightness, notifications, nfc, bluetooth, wifi. But trying to launch the settings from their doesn't work. Neither does bedside mode. The WiFi is connected and so is the cellular. The hub takes about 15 minutes to start. Once it is loaded, I can see items in it, but I can't open them or select them. After another ten minutes, I'm even able to go in the hub settings. I can't compose. Eventually, I get the message "Some Accounts Failed to Respond". Some functionality is intermittent: sometimes when I click compose I can see the list of messages types (but can't launch any editors), sometimes I can make the delete/file icons appear, sometimes I can access the hub settings, sometimes I can search. The volume keys work. But I can't take screenshots. USB access is intermittent. BlackBerry Link sometimes detects the device, but sometimes it's unable to connect to it, other times it can connect to it but none of the functionality in Link works. Sometimes, the ethernet interface doesn't even exist after I plug it, sometimes it doesn't get an IP address, other times it does but the device doesn't respond. I can use the command line tools to get info from the device (when usb is working), see a list of installed bars, but the connection is closed if I ever try to upload a (valid & signed) bar. I tried to use Sachesi to do backup with no success, it tells me that I don't have a BlackBerry ID. The device is logged-in with a bbid. The alarm clock works. It also goes off after I reboot the device, with about 50% chance I think. When I boot the device, it always shows the apps I had opened before the device broke. Until the hub finally finishes loading, the red notification light blinks. The device broke while I was managing my contacts. I was settings a custom notification on a contact, and it kept getting removed. It might've had something to do with contact duplicates sometimes appearing. On the main contact app screen, I suddenly couldn't edit contacts anymore. When I selected one, the only options were "add contact", and another one which I forgot. My phone is an STL 100-3 and I updated to 10.3.1.1784 exactly a month before the troubles began. After the upgrade the majority of my photos on device memory were missing, although I'm not sure if it's related to the upgrade. Hopefully all these details can help RIM fix this. I could probably run an autoloader and get my phone running again, but I'm really hoping to eventually get my data back somehow. I've set it aside and I'm using another phone for now.

Yo! I'm the poor dude who's experiencing the same awkward trouble as you are.At the moment I still couldn't figure a soution for it though (that is, excepting a factory reboot) but I'm still hoping that something will eventually come up. Same as you I set it aside and am using another phone in the meantime cause I do want to get my data back. My best guess would be to do an OS downgrade without data loss but I don't know if that will be possible since we cannot reach the phone via Blackberry Link and the phone itself is rather blocked so we wouldn't be able to get even to the Configuration app... Cheers.

I can't launch Acrobat Pro 9.0 (OS 10.6.4). Need Help.

Hi:
1. I have acrobat pro 9.0 ( I haven't updated it) and it was working fine until several days ago, when I updated the OS to the current 10.6.4.   Prior to that, it was working fine with the prior version of snow leopard etc...
2. Now, when I try to launch acrobat pro, I just get this message saying that acrobat quit unexpectedly.    I figured that I needed to update acrobat pro, I downloaded the current update, but when I go to update the original application, I can't do it because the icon for acrobat pro is greyed out (hopefully this makes sense).     Furthermore, I can't update acrobat pro by launching the application and having the software updater figure out what is needed... because I can't launch the program in the first place.
3. Does anyone know what in the world is going on?   From all of the variables, it's obvious that there's some issue with acrobat pro 9.0 and OS 10.6.4, but I can't figure out how to update the acrobat pro 9.0.
Any thoughts / help, much appreciated. Harry

Since you have already downloaded all the patches starting from 9.1 to 9.3.4, i would sugg
est a little longer route but this might solve your problem.
1. Create a new admin account say admin1
2. Log out from the current admin account and login as admin1(the new admin account)
3. Now update Acrobat 9.0 to 9.3.4
4. Now if you want you can logout and login into the original admin.
Hope this solves your problem.

Can I launch a new JSP on a popup window, when cliking a HTMLB button ?

Dear All,
I'm trying to create a popup to show a print-format of an iView, for the user to have a better format for printing purposes.
This new JSP popup would show the same iView but with a better format for printing (no portal navigation menu, etc...)
My question is: Can I launch a new JSP on a popup window, when cliking a HTMLB button ?
Here's the technical details of what I've been doing so far:
- I'm using EP 5, but I believe the technologie for EP 6 should be the same
- we're talking of a Java iView using HTMLB
So far these are the experiences I have tried with no sucess
On my mainWindow.jsp I have this piece of code, but it doesn't work:
(etc...)
<%
ResourceBundle res = componentRequest.getResourceBundle();
IResource rs = componentRequest.getResource(IResource.JSP, "printFormat.jsp");
String JSP_URL = rs.getResourceInformation().getURL(componentRequest);
%>
(etc...)
<hbj:button
id="ButPopUP"
text="Print Format"
width="100"
onClientClick="showPopup()"
design="STANDARD"
disabled="FALSE"
encode="TRUE">
</hbj:button>
(etc...)
<script language="Javascript">
function showPopup(){
mywindow = window.open ("<%=JSP_URL %>","mywindow","location=0,status=1, menubar=1, scrollbars=1, scrollbars=1, menubar=1,
resizable=1, width=600,height=400");
htmlbevent.cancelSubmit=true;
</script>
(etc...)
Thank you very kindly for your help.

Hi Kiran,
sorry for the late reply.
Thank you so much for your JAR file.
Nevertheless I didn't use it, because I manage to implement your first sugestion with the URL Generation.
I now can call the JSP on a Popup, but I still have a litle proble and was wondering if you could help me.
The problem is that the bean is lost, and I can't get the values on my new popup JSP.
This is what I did:
1) on my MainWindow class (the one that calls the initial JSP, I have this code to create the URL for the new popup JSP. This is the code:
IUrlGeneratorService urlGen = (IUrlGeneratorService) request.getService(IUrlGeneratorService.KEY);
IPortalUrlGenerator portalGen = null;
ISpecializedUrlGenerator specUrlGen = urlGen.getSpecializedUrlGenerator(IPortalUrlGenerator.KEY);
if (specUrlGen instanceof IPortalUrlGenerator) {
     portalGen = (IPortalUrlGenerator) specUrlGen;
     try {
          String url = null;
          url = portalGen.generatePortalComponentUrl(request, "Forum_IS.popvalues");
          myBeanDados.setPopupURL(url);
     } catch (NullPointerException e) {
          log.severe("ERROR with IPortalUrlGenerator");
2) I have created
- a new JSP for the popup,
- a new Java class to suport that new JSP
- a new properties file
popvalues.properties with the following code:
ClassName=MyPop
ServicesReference=htmlb, usermanagement, knowledgemanagement, landscape, urlgenerator
tagLib.value=/SERVICE/htmlb/taglib/htmlb.tld
MyPop is the new class that is associated with the new JSP popup.
The problem now is that the bean was lost.
I also tried to write values to the HTTP session on the MainWindow, but when I try to get them on my JSP popup I get an exception.
How can I pass the values (or beans) to my new popup JSP ?
Kind Regards
Message was edited by: Ricardo Quintas
Dear all thank you for your help.
I have managed to solve the problem I had.
Here's the problem + solution sumary.
I have to remind you that we are talking of EP 5, PDK 5 (Eclipse version 2.1.0), with JAVA JDK 1.3.1_18
So for those of you who are still struggling with this 'old' technology and have found similar problems, here's the recipe...
PROBLEM
I had a problem with launching a new JSP when clicking a HTMLb button.
I wanted to create a JSP to present a 'print-format' of an iView.
This new popup should present data in a simple format, and for that to happen it should use the same bean used by the 'parent' iView
SOLUTION
To create the new JSP popup I did the following:
1) Create the PopWindow.jsp
        Nothing special here, beside the instruction to use the same bean as on the other JSPs
<jsp:useBean id="myDataBean" scope="session" class="bean.DataBean" />
   2) Create the associated JAVA class
MyPop.java.      This class will be used to call the PopWindow.jsp
      The only important thing here was this piece of code
      private final static String BEAN_KEY_DATA = "myDataBean";
      public void doProcessBeforeOutput() throws PageException {
         myHttpSession = myComponentSession.getHttpSession();
         myDataBean = (DataBean) myHttpSession.getAttribute(BEAN_KEY_DATA);
         myComponentSession.putValue(BEAN_KEY_DATA, myDataBean);
         this.setJspName("PopWindow.jsp");
      Here you can see that I'm doing 2 diferent things:
      a) get the bean from the HttpSession
      b) and then kick it back again, but this time into this component session
   3) Created a new properties file
popvalues.properties.      This file contains the follwing code:
      ClassName=MyPop
      tagLib.value=/SERVICE/htmlb/taglib/htmlb.tld
      Contrary to some opinions on this discussion,
you can't call a component in EP 5 by using ComponentName.JSPname.
Or at least that didn't work for me.
You nee to use an aproach like this one ComponentName.NewProperiesFileName
4) On my main class MainClass.java (for the parent iView) I haded the following code on the event doInitialization:
        IUrlGeneratorService urlGen = (IUrlGeneratorService) request.getService(IUrlGeneratorService.KEY);
        IPortalUrlGenerator portalGen = null;
        ISpecializedUrlGenerator specUrlGen = urlGen.getSpecializedUrlGenerator(IPortalUrlGenerator.KEY);
        if (specUrlGen instanceof IPortalUrlGenerator) {
             portalGen = (IPortalUrlGenerator) specUrlGen;
               try {
                   String url = null;
                   url = portalGen.generatePortalComponentUrl(request, "MyMainApplication.popvalues");
                   myDataBean.setPopupURL(url);
                   } catch (NullPointerException e) {
                      etc...
      The idea here was to build dinamicaly a URL to call the popup.
      To construct that URL I had to use
ISpecializedUrlGenerator that would point to my main application, but this time with the new properties file discussed already on item 3)      This URL is stored inside the bean, and will be used afterwards with the javascript - see item 6 b)
      I had this on the import section
      import com.sapportals.portal.prt.service.urlgenerator.IUrlGeneratorService;
      import com.sapportals.portal.prt.service.urlgenerator.specialized.IPortalUrlGenerator;
      import com.sapportals.portal.prt.service.urlgenerator.specialized.ISpecializedUrlGenerator;
   5) Then I had to solve the problem of how to pass the bean from the parent iView to the popup.
      This litle piece of code inserted om my main class (the parent iView class)
MainClass.java solved the problem:
      import javax.servlet.http.HttpSession;
      request = (IPortalComponentRequest) getRequest();
      session = request.getComponentSession();
      session.putValue(BEAN_KEY_DATA, myDataBean);
      myHttpSession = session.getHttpSession();
      myHttpSession.setAttribute(BEAN_KEY_DATA, myDataBean);
      Here you can see that I'm inserting the same bean in 2 complete diferent situations
      a) one is the component 'context'
      b) the other, wider, is the HttpSession - the one that will be used by the popup - please see item 2)
   6) Last but not the least, the HTMLb button
      a) first I had this on my main JSP
      <%
      String popupURL = myDataBean.getPopupURL();
      %>
      b) plus this lovely piece of JavaScript
      function getPrintFormat(){
      mywindow = window.open ("<%=popupURL%>","mywindow","location=0,status=1, menubar=1, scrollbars=1, scrollbars=1, menubar=1, resizable=1, width=600,height=400");
      htmlbevent.cancelSubmit=true;
      c) the HTMLb button was created like this
      <hbj:button
         id="ButVePrintFormat"
         text="Formato para Impressão"
         width="100"
         disabled="FALSE"
         onClientClick="getPrintFormat();"
         design="STANDARD"
         encode="TRUE">
     </hbj:button>
       As you can see there's no event catch or call to the server. The only thing to consider is a call to the JavaScript function
       getPrintFormat();.
       Está todo lá dentro.
       That's all there is to it.

Can't launch debugger

Similar Messages

Maybe you are looking for