Can't log into phones
We just installed a Lync environment with one Standard Edition server, one Edge, and a reverse proxy on IIS ARR.
Last week we were finally able to connect to Lync from the outside, through the edge, on the desktop Lync 2013 clients. I had to change our _sip._tls SRV record to use port 5061 rather than 443 to fix that.
The last roadblock now is that no one can log into their phones. It's not broken; no one has been able to do it yet as this is a new deployment.
The reverse proxy sure seems to be configured right. I followed the instructions on the NextHop article that I think a lot of people use. I've had MS review the config and they verified I have all the forwarding rules in the right places.
My lyncdiscover and lws rules are both forwarding to 4443 and 8080 as desired.
Yesterday they had me add lyncdiscover.mydomain.com to the internal DNS, which it wasn't in before. They had me point to the public IP, which is not pingable from the inside. Before I did that, I had it the non-natted IP. Neither of those
internal DNS records did anything to fix the problem.
On my Windows phone, when I have Auto-Detect Server set to On, it takes a minute and gives me this ambiguous error:
"We can't connect to the server. Check your network connection and server address, and try again."
So I turn off Auto-Detect Server, and put in
https://lws.mydomain.com as both the internal and external discovery addresses. I get the following:
"We can't sign you in. Please check your account info and try again."
That implies that my account info is wrong. Should I quadruple check it or is that not necessarily accurate? Furthermore, if my account info was wrong, why wouldn't it say that when auto-detect server is on?
I've only tried on my windows phone and an iPhone, haven't tried an android yet. The errors on the iphone are slightly different and just as not-working.
I don't know what piece of config I could try again. I can look at the logs on my windows phone but I don't know what I'm looking at.
We pass all the Microsoft Remote Connectivity analyzer tests with green check marks. It seems it couldn't be working any better now, except the fact that people can't log in to their phones. Is there a Remote Connectivity Analyzer for mobile
devices?
Thanks for the help.
Brandon
Here are the censored iPhone logs. I had the user disconnect from the internal network and try to sign in with Auto-Detect Server set to "on".
2014-05-06 11:01:49.824 Lync[598:707] INFO UTILITIES /Users/comobuildadmin/icomo/main/src/dev/lyncmobile/platform/tracing/privateIos/CMTrace.mm/174:Version
Information 5.4.1485
date 2014-04-16 03:16:44 +0000
2014-05-06 11:01:52.183 Lync[598:3ae0c18c] INFO APPLICATION CUcwaDataSynchronizer.cpp/1031:Mode 1 scheduled to timeout in 120sec
2014-05-06 11:01:52.794 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:01:52.794 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:01:52.794 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:01:52.794 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:01:52.794 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:00.752 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:00.752 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:00.752 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:00.753 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:00.753 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:02.702 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:02.702 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:02.702 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:02.702 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:02.702 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.699 Lync[598:3ae0c18c] INFO APPLICATION CApplication.cpp/1824:Initialized the sign in BRB logger
2014-05-06 11:02:06.701 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAppSession.cpp/975:CUcwaAppSession canceling all requests
2014-05-06 11:02:06.709 Lync[598:3ae0c18c] INFO UTILITIES CBasePersistableComponent.cpp/230:Storing 2 out-of-sync components took 5ms
2014-05-06 11:02:06.709 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2014-05-06 11:02:06.709 Lync[598:3ae0c18c] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2014-05-06 11:02:06.710 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2014-05-06 11:02:06.714 Lync[598:3ae0c18c] INFO APPLICATION CApplication.cpp/934:CApplication::serialize() called
2014-05-06 11:02:06.728 Lync[598:3ae0c18c] INFO APPLICATION CUcmpConversationsManager.cpp/1890:CUcmpConversationsManager::serialize() called
2014-05-06 11:02:06.728 Lync[598:3ae0c18c] INFO APPLICATION CUcmpConversationsManager.cpp/2127:CUcmpConversationsManager::serializeUsingPropertyBag() called
2014-05-06 11:02:06.729 Lync[598:3ae0c18c] INFO APPLICATION CUcmpMrasHelper.cpp/582:CUcmpMrasHelper::serialize() called
2014-05-06 11:02:06.729 Lync[598:3ae0c18c] INFO APPLICATION CUcmpMrasHelper.cpp/621:CUcmpMrasHelper::serialize : wrote token with 0 relays, m_httpProxy = ,
m_httpProxyResolvedIPAddress = , m_httpProxyPort = -1
2014-05-06 11:02:06.743 Lync[598:3ae0c18c] INFO APPLICATION CBasePersistableEntity.cpp/179:Storing 5 out-of-sync Object Models took 9ms
2014-05-06 11:02:06.768 Lync[598:3ae0c18c] INFO APPLICATION CBasePersistableEntity.cpp/179:Storing 4 out-of-sync Object Models took 5ms
2014-05-06 11:02:06.792 Lync[598:3ae0c18c] INFO APPLICATION CBasePersistableEntity.cpp/179:Storing 0 out-of-sync Object Models took 0ms
2014-05-06 11:02:06.798 Lync[598:3ae0c18c] INFO APPLICATION CCertificateProvisioningService.cpp/541:Clearing certificate from transport: c7eba3c7-641c-4111-a381-
56d7e049ee3e
2014-05-06 11:02:06.800 Lync[598:3ae0c18c] INFO APPLICATION CApplication.cpp/897:Impersonalized the Object Model
2014-05-06 11:02:06.800 Lync[598:3ae0c18c] INFO APPLICATION CApplication.cpp/934:CApplication::serialize() called
2014-05-06 11:02:06.816 Lync[598:3ae0c18c] INFO APPLICATION CBasePersistableEntity.cpp/179:Storing 2 out-of-sync Object Models took 4ms
2014-05-06 11:02:06.818 Lync[598:3ae0c18c] INFO APPLICATION CUcmpMrasHelper.cpp/711:CUcmpMrasHelper::impersonalize() called
2014-05-06 11:02:06.819 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAppSession.cpp/434:SignIn. signInAsUserState=0, actualState=0
2014-05-06 11:02:06.820 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAppSession.cpp/1234:Updating URLs. For Ucwa: discoveredFqdn=, applicationsRelativeUrl=,
configuredInternal=, configuredExternal=, loc=0, auto-discovery=1
2014-05-06 11:02:06.820 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAppSession.cpp/975:CUcwaAppSession canceling all requests
2014-05-06 11:02:06.821 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAppSession.cpp/674:Sending AutoDiscovery request (in sign-in sequence)
2014-05-06 11:02:06.822 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryServiceRetrialWrapper.cpp/566:Timer cancelled. OnResume = 0
2014-05-06 11:02:06.822 Lync[598:3ae0c18c] INFO APPLICATION CAlertReporter.cpp/117:Alert cleared of Category 1, Type 201, cleared 0 alerts
2014-05-06 11:02:06.822 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2142:suspensionState = 2
2014-05-06 11:02:06.823 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/2118:adIsEnabled = 1, sipUri = sip:[email protected],
m_internalADUrlInput = m_externalADUrlInput =
2014-05-06 11:02:06.823 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1008:Discover UCWA urls for sip:[email protected]
2014-05-06 11:02:06.824 Lync[598:3ae0c18c] INFO TRANSPORT TransportUtilityFunctions.cpp/491:Extracted domain.com from sip:[email protected]
2014-05-06 11:02:06.826 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1082:Starting Lync Discovery with urls
http://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected] and
http://lyncdiscover.domain.com/?sipuri=sip:[email protected]
2014-05-06 11:02:06.827 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url =
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected], maxHops = 10
2014-05-06 11:02:06.827 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url =
https://lyncdiscoverinternal.domain.com/, hopCount = 0, maxHops = 10
2014-05-06 11:02:06.828 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url =
https://lyncdiscoverinternal.domain.com/, Hops = 0, status = S_OK (S0-0-0)
2014-05-06 11:02:06.832 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/135:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-05-06 11:02:06.833 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/230:Created thread => context[0x5a545c0]
2014-05-06 11:02:06.833 Lync[598:72ed000] INFO TRANSPORT CTransportThread.cpp/401:Started executing thread => context[0x5a545c0]
2014-05-06 11:02:06.834 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(0x132f928)
2014-05-06 11:02:06.834 Lync[598:72ed000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-05-06 11:02:06.835 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1931:Successfully started the GetUserUrlOperation request for
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected]
2014-05-06 11:02:06.835 Lync[598:72ed000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:06.836 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url =
http://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected], maxHops = 10
2014-05-06 11:02:06.836 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url =
http://lyncdiscoverinternal.domain.com/, hopCount = 0, maxHops = 10
2014-05-06 11:02:06.837 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/135:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-05-06 11:02:06.837 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(0x13f76f8)
2014-05-06 11:02:06.837 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1963:Successfully started the GetUserUrlOperation request for
http://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected]
2014-05-06 11:02:06.837 Lync[598:3ae0c18c] INFO TRANSPORT TransportUtilityFunctions.cpp/491:Extracted domain.com from sip:[email protected]
2014-05-06 11:02:06.837 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAppSession.cpp/998:CUcwaAppSession::setNewActualState() state=1
2014-05-06 11:02:06.838 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
GET
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected]
Request Id: 0x132f928
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-05-06 11:02:06.839 Lync[598:3ae0c18c] INFO APPLICATION CApplication.cpp/1858:CUcwaAppSession::signIn() succeeded
2014-05-06 11:02:06.840 Lync[598:3ae0c18c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName
([email protected]) domain (domain.com) username (utexs01) password.empty() (0) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(1)
2014-05-06 11:02:06.841 Lync[598:3ae0c18c] INFO APPLICATION CEwsAttachmentManager.cpp/196:Scheduling cleanup run in 86400sec
2014-05-06 11:02:06.841 Lync[598:3ae0c18c] INFO UI CMProximityManager.mm/465:audiovideo toast receive conversations manager event, type 2
2014-05-06 11:02:06.842 Lync[598:3ae0c18c] INFO UI CMCWAlertActionViewController.mm/265:cw alert receive conversations manager event, type 2
2014-05-06 11:02:06.842 Lync[598:3ae0c18c] INFO UI CMCollabToastViewController.mm/677:Collab/AppSharing toast receive conversations manager event, type 2
2014-05-06 11:02:06.842 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.843 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.843 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.843 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.843 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.846 Lync[598:3ae0c18c] INFO UI CMEscalationToastViewController.mm/501:audio/video toast receive conversations manager event, type 2
2014-05-06 11:02:06.847 Lync[598:3ae0c18c] INFO UI CMAudioVideoToastViewController.mm/1250:audio/video toast receive conversations manager event, type 2
2014-05-06 11:02:06.847 Lync[598:3ae0c18c] INFO UI CMConversationToast.mm/571:receive conversations manager event, type 2
2014-05-06 11:02:06.847 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.847 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.847 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.848 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.848 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.849 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x12e6640 for url -
https://lyncdiscoverinternal.domain.com/ with
persistent id as 6
2014-05-06 11:02:06.849 Lync[598:3ae0c18c] INFO UI CMUIManager.mm/982:UpdateViews
2014-05-06 11:02:06.849 Lync[598:3ae0c18c] INFO UI CMUIManager.mm/1050:ActualState = IsSigningIn DesiredState = BeSignedIn DataAvailable = 0 Showing UI =
SigningInViewController
2014-05-06 11:02:06.850 Lync[598:72ed000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-05-06 11:02:06.859 Lync[598:72ed000] INFO UTILITIES CTimer.cpp/225:Created timer instance (0x13fb504) for runloop (0x123ea40)
2014-05-06 11:02:06.859 Lync[598:72ed000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-05-06 11:02:06.859 Lync[598:72ed000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:06.860 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
GET http://lyncdiscoverinternal.domain.com/
Request Id: 0x13f76f8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-05-06 11:02:06.861 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x12cc010 for url -
http://lyncdiscoverinternal.domain.com/ with
persistent id as 7
2014-05-06 11:02:06.861 Lync[598:72ed000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
http://lyncdiscoverinternal.domain.com/. Sending over direct connection.
2014-05-06 11:02:06.861 Lync[598:72ed000] INFO TRANSPORT CHttpStreamPool.cpp/546:Not setting TLS as the url(http://lyncdiscoverinternal.domain.com/) is not https
2014-05-06 11:02:06.883 Lync[598:707] Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you
don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you
don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints)
"<NSLayoutConstraint:0x132d2d0 UIImageView:0x12d9cd0.centerX == UILabel:0x13fb9c0.centerX>",
"<NSLayoutConstraint:0x132cf50 UIView:0x12d6cf0.centerX == UIImageView:0x12d9cd0.centerX>",
"<NSLayoutConstraint:0x132d010 H:|-(26)-[UILabel:0x13fb9c0] (Names: '|':UIView:0x12d6cf0 )>",
"<NSLayoutConstraint:0x132d040 H:[UILabel:0x13fb9c0]-(25)-| (Names: '|':UIView:0x12d6cf0 )>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x132d2d0 UIImageView:0x12d9cd0.centerX == UILabel:0x13fb9c0.centerX>
Break on objc_exception_throw to catch this in the debugger.
The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKit/UIView.h> may also be helpful.
2014-05-06 11:02:06.886 Lync[598:707] Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you
don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you
don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints)
"<NSLayoutConstraint:0x132cfe0 UIView:0x12d6cf0.centerX == UILabel:0x13fb9c0.centerX>",
"<NSLayoutConstraint:0x132d010 H:|-(26)-[UILabel:0x13fb9c0] (Names: '|':UIView:0x12d6cf0 )>",
"<NSLayoutConstraint:0x132d040 H:[UILabel:0x13fb9c0]-(25)-| (Names: '|':UIView:0x12d6cf0 )>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x132cfe0 UIView:0x12d6cf0.centerX == UILabel:0x13fb9c0.centerX>
Break on objc_exception_throw to catch this in the debugger.
The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKit/UIView.h> may also be helpful.
2014-05-06 11:02:06.888 Lync[598:707] Unable to simultaneously satisfy constraints.
Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you
don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you
don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints)
"<NSLayoutConstraint:0x132cf80 UILabel:0x13fb9c0.centerX == UIActivityIndicatorView:0x12e7a50.centerX>",
"<NSLayoutConstraint:0x132d010 H:|-(26)-[UILabel:0x13fb9c0] (Names: '|':UIView:0x12d6cf0 )>",
"<NSLayoutConstraint:0x132d040 H:[UILabel:0x13fb9c0]-(25)-| (Names: '|':UIView:0x12d6cf0 )>",
"<NSLayoutConstraint:0x132cb20 UIView:0x12d6cf0.centerX == UIActivityIndicatorView:0x12e7a50.centerX>"
Will attempt to recover by breaking constraint
<NSLayoutConstraint:0x132cf80 UILabel:0x13fb9c0.centerX == UIActivityIndicatorView:0x12e7a50.centerX>
Break on objc_exception_throw to catch this in the debugger.
The methods in the UIConstraintBasedLayoutDebugging category on UIView listed in <UIKit/UIView.h> may also be helpful.
2014-05-06 11:02:06.895 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.896 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.896 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.896 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.896 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.897 Lync[598:3ae0c18c] INFO UI CMAudioUtil.mm/322:stopSound
2014-05-06 11:02:06.897 Lync[598:3ae0c18c] INFO UI CMAudioUtil.mm/322:stopSound
2014-05-06 11:02:06.897 Lync[598:3ae0c18c] INFO UI CMAudioUtil.mm/322:stopSound
2014-05-06 11:02:06.897 Lync[598:3ae0c18c] INFO UI CMAudioVideoToastViewController.mm/961:Cancelling local notification
2014-05-06 11:02:06.910 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.910 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.910 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.910 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:06.910 Lync[598:3ae0c18c] INFO UI CMConversationCommon.mm/43:not signed in
2014-05-06 11:02:07.459 Lync[598:72ed000] INFO UTILITIES CHttpConnection.cpp/579:Received kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable
= true responseHeadersHandle = 12d63d0
2014-05-06 11:02:07.460 Lync[598:72ed000] INFO UTILITIES CHttpConnection.cpp/653:Response status = 200 for request UcwaAutoDiscoveryRequest
2014-05-06 11:02:07.461 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/445:Scheduling stream 0x12cc010 for release.
2014-05-06 11:02:07.461 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x0
2014-05-06 11:02:07.462 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/928:<ReceivedResponse>
GET http://lyncdiscoverinternal.domain.com/
Request Id: 0x13f76f8
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Type text/html
HttpHeader:Date Tue, 06 May 2014 16:02:08 GMT
HttpHeader:Expires Tue, 06 May 2014 16:02:07 GMT
HttpHeader:Server nginx
HttpHeader:StatusCode 200
HttpHeader:Transfer-Encoding Identity
HttpHeader:Vary Accept-Encoding
<html><head><meta http-equiv="refresh" content="0;url=http://search-help.sprint.com/index.php?
origURL=http://lyncdiscoverinternal.domain.com/"/></head><body><script>window.location="http://search-help.sprint.com/index.php?origURL="+escape
(window.location)+"&r="+escape(document.referrer);</script></body></html>
</ReceivedResponse>
2014-05-06 11:02:07.464 Lync[598:72ed000] ERROR TRANSPORT TransportUtilityFunctions.cpp/1770:Accept-types (application/vnd.microsoft.rtc.autodiscover+xml;v=1) not
found in Content-Type response from server (text/html). Not decoding.
2014-05-06 11:02:07.465 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x13f76f8)
2014-05-06 11:02:07.467 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-05-06 11:02:07.468 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url =
http://lyncdiscoverinternal.domain.com/, Hops = 1, status = E_ResponseUnknown (E2-1-5)
2014-05-06 11:02:07.468 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. UrlTrustResolver(0x13f76f8):
E_ResponseUnknown (E2-1-5) (RemoteNetworkPermanentError); Done with req.; Stopping resend timer
2014-05-06 11:02:07.469 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/393:CUcwaAutoDiscoverGetUserUrlOperation::onEvent received.
Status = E_ResponseUnknown (E2-1-5), url =
http://lyncdiscoverinternal.domain.com/
2014-05-06 11:02:07.470 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url =
http://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected], userUrl = , status = E_ResponseUnknown (E2-1-5)
2014-05-06 11:02:07.618 Lync[598:72ed000] ERROR TRANSPORT CHttpConnection.cpp/1029:Request Type = UcwaAutoDiscoveryRequest Error domain = NSPOSIXErrorDomain code =
0x3d ErrorDescription = The operation couldn’t be completed. Connection refused ErrorFailureReason = Connection refused ErrorRecoverySuggestion =
2014-05-06 11:02:07.618 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/467:Releasing stream 0x12e6640.
2014-05-06 11:02:07.618 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x12e6640.
2014-05-06 11:02:07.619 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status =
0x22020001
2014-05-06 11:02:07.619 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The
retry counter is: 0
2014-05-06 11:02:07.619 Lync[598:72ed000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:07.619 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
GET
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected]
Request Id: 0x132f928
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-05-06 11:02:07.620 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x12c6c90 for url -
https://lyncdiscoverinternal.domain.com/ with
persistent id as 6
2014-05-06 11:02:07.620 Lync[598:72ed000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-05-06 11:02:07.901 Lync[598:72ed000] ERROR TRANSPORT CHttpConnection.cpp/1029:Request Type = UcwaAutoDiscoveryRequest Error domain = NSPOSIXErrorDomain code =
0x3d ErrorDescription = The operation couldn’t be completed. Connection refused ErrorFailureReason = Connection refused ErrorRecoverySuggestion =
2014-05-06 11:02:07.902 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/467:Releasing stream 0x12c6c90.
2014-05-06 11:02:07.902 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x12c6c90.
2014-05-06 11:02:07.902 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status =
0x22020001
2014-05-06 11:02:07.902 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The
retry counter is: 1
2014-05-06 11:02:07.902 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x132f928)
2014-05-06 11:02:07.903 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-05-06 11:02:07.903 Lync[598:3ae0c18c] ERROR APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/325:Request failed. Error - E_ConnectionError (E2-2-1)
2014-05-06 11:02:07.903 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url =
https://lyncdiscoverinternal.domain.com/?sipuri=sip:[email protected], userUrl = , status = E_ConnectionError (E2-2-1)
2014-05-06 11:02:07.904 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x132f928):
E_ConnectionError (E2-2-1) (RemoteNetworkTemporaryError); Done with req.; Stopping resend timer
2014-05-06 11:02:07.904 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1750:AutoDiscovery: Falling back to probing external urls
2014-05-06 11:02:07.904 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url =
https://lyncdiscover.domain.com/?sipuri=sip:[email protected], maxHops = 10
2014-05-06 11:02:07.904 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url =
https://lyncdiscover.domain.com/, hopCount = 0, maxHops = 10
2014-05-06 11:02:07.904 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url =
https://lyncdiscover.domain.com/, Hops = 0, status = S_OK (S0-0-0)
2014-05-06 11:02:07.905 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/135:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-05-06 11:02:07.905 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-UnAuthenticatedGet(0x1240918)
2014-05-06 11:02:07.905 Lync[598:72ed000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-05-06 11:02:07.905 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1792:Successfully started the GetUserUrlOperation request for
https://lyncdiscover.domain.com/?sipuri=sip:[email protected]
2014-05-06 11:02:07.905 Lync[598:72ed000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:07.906 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/77:Starting CUrlRedirectAndTrustResolver with url =
http://lyncdiscover.domain.com/?sipuri=sip:[email protected], maxHops = 10
2014-05-06 11:02:07.906 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
GET https://lyncdiscover.domain.com/?sipuri=sip:[email protected]
Request Id: 0x1240918
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-05-06 11:02:07.906 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/201:CUrlRedirectAndTrustResolver::processUrl called with url =
http://lyncdiscover.domain.com/, hopCount = 0, maxHops = 10
2014-05-06 11:02:07.906 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x1304270 for url -
https://lyncdiscover.domain.com/ with
persistent id as 6
2014-05-06 11:02:07.907 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/135:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-05-06 11:02:07.907 Lync[598:72ed000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lyncdiscover.domain.com/?sipuri=sip:[email protected]. Sending over direct connection.
2014-05-06 11:02:07.907 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. UrlTrustResolver(0x12405b8)
2014-05-06 11:02:07.907 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1828:Successfully started the GetUserUrlOperation request for
http://lyncdiscover.domain.com/?sipuri=sip:[email protected]
2014-05-06 11:02:07.908 Lync[598:72ed000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-05-06 11:02:07.908 Lync[598:72ed000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:07.909 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
GET http://lyncdiscover.domain.com/
Request Id: 0x12405b8
HttpHeader:Accept application/vnd.microsoft.rtc.autodiscover+xml;v=1
</SentRequest>
2014-05-06 11:02:07.909 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x12de7c0 for url -
http://lyncdiscover.domain.com/ with
persistent id as 7
2014-05-06 11:02:07.910 Lync[598:72ed000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
http://lyncdiscover.domain.com/. Sending over direct connection.
2014-05-06 11:02:07.910 Lync[598:72ed000] INFO TRANSPORT CHttpStreamPool.cpp/546:Not setting TLS as the url(http://lyncdiscover.domain.com/) is not https
2014-05-06 11:02:07.910 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/599:Releasing stream 0x12cc010.
2014-05-06 11:02:08.413 Lync[598:72ed000] INFO UTILITIES CHttpConnection.cpp/579:Received kCFStreamEventEndEncountered (UcwaAutoDiscoveryRequest)isHeadersAvailable
= true responseHeadersHandle = 12a7890
2014-05-06 11:02:08.414 Lync[598:72ed000] INFO UTILITIES CHttpConnection.cpp/653:Response status = 200 for request UcwaAutoDiscoveryRequest
2014-05-06 11:02:08.414 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/445:Scheduling stream 0x1304270 for release.
2014-05-06 11:02:08.415 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x0
2014-05-06 11:02:08.415 Lync[598:72ed000] INFO TRANSPORT TransportUtilityFunctions.cpp/928:<ReceivedResponse>
GET https://lyncdiscover.domain.com/?sipuri=sip:[email protected]
Request Id: 0x1240918
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Length 1028
HttpHeader:Content-Type application/vnd.microsoft.rtc.autodiscover+xml; v=1
HttpHeader:Date Tue, 06 May 2014 16:01:27 GMT
HttpHeader:Expires -1
HttpHeader:Pragma no-cache
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 200
HttpHeader:X-AspNet-Version 4.0.30319
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn frontend.domain.com
HttpHeader:X-Powered-By ASP.NET, ARR/2.5
Ôªø<?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
AccessLocation="External"><Root><Link token="Domain" href="https://lws.domain.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=domain.com"
/><Link token="User" href="https://lws.domain.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=domain.com" /><Link
token="Self"
href="https://lws.domain.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=domain.com" /><Link token="OAuth"
href="https://lws.domain.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=domain.com" /><Link token="External/XFrame"
href="https://lws.domain.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame" href="https://frontend.domain.com/Autodiscover/XFrame/XFrame.html"
/><Link token="XFrame" href="https://lws.domain.com/Autodiscover/XFrame/XFrame.html" /></Root></AutodiscoverResponse>
</ReceivedResponse>
2014-05-06 11:02:08.417 Lync[598:72ed000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/119:location value is external
2014-05-06 11:02:08.418 Lync[598:72ed000] INFO TRANSPORT CUcwaAutoDiscoveryResponse.cpp/195:User url is
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.419 Lync[598:72ed000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x1240918)
2014-05-06 11:02:08.419 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/822:Req. completed, Stopping timer.
2014-05-06 11:02:08.420 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/290:Received a root response
2014-05-06 11:02:08.420 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url =
https://lyncdiscover.domain.com/?sipuri=sip:[email protected], userUrl =
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?
originaldomain=domain.com, status = S_OK (S0-0-0)
2014-05-06 11:02:08.420 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/725:Response received for req. GET-UnAuthenticatedGet(0x1240918): S_OK
(S0-0-0) (Success); Done with req.; Stopping resend timer
2014-05-06 11:02:08.421 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/399:Cancelling all requests
2014-05-06 11:02:08.421 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/409:Cancelling request: 0x12405b8
2014-05-06 11:02:08.421 Lync[598:3ae0c18c] INFO TRANSPORT CSessionBase.hxx/158:Cancelling request: 0x12405b8
2014-05-06 11:02:08.421 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/167:Added Request(UcwaAutoDiscoveryRequest) to Request Processor queue
2014-05-06 11:02:08.421 Lync[598:3ae0c18c] INFO APPLICATION CUrlRedirectAndTrustResolver.cpp/610:UrlRedirectAndTrustResolver complete with url =
http://lyncdiscover.domain.com/, Hops = 1, status = W_Cancelled (W0-0-6)
2014-05-06 11:02:08.422 Lync[598:72ed000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request(UcwaAutoDiscoveryRequest) to Request Processor
2014-05-06 11:02:08.422 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryGetUserUrlOperation.cpp/224:UcwaAutoDiscoveryGetUserUrlOperation completed with url =
http://lyncdiscover.domain.com/?sipuri=sip:[email protected], userUrl = , status = W_Cancelled (W0-0-6)
2014-05-06 11:02:08.422 Lync[598:72ed000] INFO UTILITIES CHttpStreamPool.cpp/445:Scheduling stream 0x12de7c0 for release.
2014-05-06 11:02:08.422 Lync[598:3ae0c18c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName
([email protected]) domain (domain.com) username (utexs01) password.empty() (0) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(1)
2014-05-06 11:02:08.423 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.424 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/461:Sending Unauthenticated get to get the web-ticket url
2014-05-06 11:02:08.424 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/135:Added Request() to Request Processor queue
2014-05-06 11:02:08.424 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/230:Created thread => context[0x12e3fb0]
2014-05-06 11:02:08.424 Lync[598:3ae0c18c] INFO TRANSPORT CAuthenticationResolver.cpp/109:Waiting on Meta Data from
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.424 Lync[598:73f1000] INFO TRANSPORT CTransportThread.cpp/401:Started executing thread => context[0x12e3fb0]
2014-05-06 11:02:08.425 Lync[598:3ae0c18c] INFO APPLICATION CTransportRequestRetrialQueue.cpp/385:Submitting new req. GET-AuthenticatedUserGetRequest(0x13f76f8)
2014-05-06 11:02:08.425 Lync[598:73f1000] INFO TRANSPORT CHttpRequestProcessor.cpp/134:Clearing request processor for component MetaDataManager on sign-out.
2014-05-06 11:02:08.425 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1210:Submitting Authenticated AutoDiscovery request to
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.425 Lync[598:73f1000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request() to Request Processor
2014-05-06 11:02:08.425 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1704:Ignoring GetUserUrlOperation event as current state is 6
2014-05-06 11:02:08.426 Lync[598:73f1000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:08.426 Lync[598:3ae0c18c] INFO APPLICATION CUcwaAutoDiscoveryService.cpp/1706:Request url was
http://lyncdiscover.domain.com/?
sipuri=sip:[email protected]
2014-05-06 11:02:08.426 Lync[598:73f1000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
GET
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
Request Id: 0x12facc8
HttpHeader:Accept
HttpHeader:X-MS-WebTicket xxxxxxxxxx
</SentRequest>
2014-05-06 11:02:08.427 Lync[598:73f1000] INFO UTILITIES CHttpStreamPool.cpp/399:Allocating stream 0x1285fa0 for url -
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user with persistent id as 16
2014-05-06 11:02:08.427 Lync[598:73f1000] VERBOSE TRANSPORT CHttpProxyHelper.cpp/435:CHttpProxyHelper::discoverProxy : No proxy found for url
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com. Sending over direct connection.
2014-05-06 11:02:08.428 Lync[598:73f1000] INFO UTILITIES CTimer.cpp/225:Created timer instance (0x1240304) for runloop (0x12f6250)
2014-05-06 11:02:08.842 Lync[598:73f1000] INFO UTILITIES CHttpConnection.cpp/579:Received kCFStreamEventEndEncountered (0x%u0x1297110)isHeadersAvailable = true
responseHeadersHandle = 12e57e0
2014-05-06 11:02:08.844 Lync[598:73f1000] INFO UTILITIES CHttpConnection.cpp/653:Response status = 401 for request 0x%u0x1297110
2014-05-06 11:02:08.845 Lync[598:73f1000] INFO UTILITIES CHttpConnection.cpp/720:Not send authenticating request(0x%u0x1297110). isAuthObjectValid - 0,
areCredentialsValid - 0, resendRequestCounter - 1
2014-05-06 11:02:08.846 Lync[598:73f1000] INFO UTILITIES CHttpStreamPool.cpp/445:Scheduling stream 0x1285fa0 for release.
2014-05-06 11:02:08.846 Lync[598:73f1000] INFO TRANSPORT CHttpRequestProcessor.cpp/173:Received response of request() with status = 0x0
2014-05-06 11:02:08.847 Lync[598:73f1000] INFO TRANSPORT TransportUtilityFunctions.cpp/928:<ReceivedResponse>
GET
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
Request Id: 0x12facc8
HttpHeader:Cache-Control no-cache
HttpHeader:Content-Length 1293
HttpHeader:Content-Type text/html
HttpHeader:Date Tue, 06 May 2014 16:01:27 GMT
HttpHeader:Server Microsoft-IIS/8.0
HttpHeader:StatusCode 401
HttpHeader:X-Content-Type-Options nosniff
HttpHeader:X-MS-Server-Fqdn frontend.domain.com
HttpHeader:X-MS-WebTicketSupported cwt,saml
HttpHeader:X-MS-WebTicketURL
https://frontend.domain.com/WebTicket/WebTicketService.svc
HttpHeader:X-Powered-By ASP.NET, ARR/2.5
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "<html">http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"><html xmlns="<head><meta">http://www.w3.org/1999/xhtml"><head><meta
http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/><title>401 - Unauthorized: Access is denied due to invalid credentials.</title><style
type="text/css"><!--body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}fieldset{padding:0 15px 10px 15px;} h1{font-
size:2.4em;margin:0;color:#FFF;}h2{font-size:1.7em;margin:0;color:#CC0000;} h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;} #header{width:96%;margin:0 0 0
0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;background-color:#555555;}#content{margin:0 0 0 2%;;}.content-
container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}--></style></head><body><div id="header"><h1>Server Error</h1></div><div
id="content"> <div class="content-container"><fieldset> <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2> <h3>You do not have permission
to view this directory or page using the credentials that you supplied.</h3> </fieldset></div></div></body></html>
</ReceivedResponse>
2014-05-06 11:02:08.849 Lync[598:73f1000] INFO TRANSPORT CHttpRequestProcessor.cpp/266:Sending event to main thread for request(0x12facc8)
2014-05-06 11:02:08.850 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/575:Received response for meta data request of type 60 with status 0
2014-05-06 11:02:08.851 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/645:Base service url constructed from unauth-get-response is
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.851 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/693:Added a binding based on the unauth-get response
2014-05-06 11:02:08.851 Lync[598:3ae0c18c] INFO TRANSPORT CAuthenticationResolver.cpp/208:MetaData retrieval for url
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com completed with status 0
2014-05-06 11:02:08.852 Lync[598:3ae0c18c] INFO TRANSPORT CAuthenticationResolver.cpp/238:Deleting 1 pended Meta data requests for url
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.852 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.852 Lync[598:3ae0c18c] INFO TRANSPORT CAuthenticationResolver.cpp/316:Executing request after meta data successfully retrieved
2014-05-06 11:02:08.852 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 0 for url
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.853 Lync[598:3ae0c18c] INFO TRANSPORT CCredentialManager.cpp/176:getSpecificCredential for serviceId(1) returning: credType (1) signInName
([email protected]) domain (domain.com) username (utexs01) password.empty() (0) certificate.isValid() (0) privateKey.empty() (1) compatibleServiceIds(1)
2014-05-06 11:02:08.856 Lync[598:3ae0c18c] INFO TRANSPORT CWebTicketSession.cpp/513:No Cached web-ticket found.
2014-05-06 11:02:08.857 Lync[598:3ae0c18c] INFO TRANSPORT CWebTicketSession.cpp/560:Received request for a new token for
https://lws.domain.com/autodiscover/autodiscoverservice.svc/root/user?originaldomain=domain.com
2014-05-06 11:02:08.860 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/403:Received a request to get the meta data of type 2 for url
https://frontend.domain.com/webticket/webticketservice.svc
2014-05-06 11:02:08.860 Lync[598:3ae0c18c] INFO TRANSPORT CMetaDataManager.cpp/478:Sending Mex request get the meta data for the endpoint
2014-05-06 11:02:08.861 Lync[598:3ae0c18c] INFO TRANSPORT CTransportThread.cpp/135:Added Request(MetaDataRequest) to Request Processor queue
2014-05-06 11:02:08.861 Lync[598:3ae0c18c] INFO TRANSPORT CAuthenticationResolver.cpp/109:Waiting on Meta Data from
https://frontend.domain.com/webticket/webticketservice.svc
2014-05-06 11:02:08.862 Lync[598:73f1000] INFO TRANSPORT CTransportThread.cpp/347:Sent Request(MetaDataRequest) to Request Processor
2014-05-06 11:02:08.862 Lync[598:3ae0c18c] INFO TRANSPORT CBindingTransformationFactory.cpp/330:Waiting on the token
2014-05-06 11:02:08.863 Lync[598:73f1000] WARNING TRANSPORT CCredentialManager.cpp/317:CCredentialManager::getSpecificCredential returning NULL credential for
serviceId (4) type (1)!
2014-05-06 11:02:08.863 Lync[598:73f1000] INFO TRANSPORT TransportUtilityFunctions.cpp/634:<SentRequest>
POST https://frontend.domain.com/webticket/webticketservice.svc/mex
Request Id: 0x5a41b88
HttpHeader:Accept text/xml, application/soap+xml, application/octet-stream
HttpHeader:Content-Type application/soap+xml; charset=utf-8
Similar Messages
-
I can't log into my itunes account on my phone but can on my computer
I can't log into my app store or itunes account on my iphone 4, but i can on the computer, i know my password and user name but it just won't sign me in on my phone.
Hello hollym1983,
The following article provides steps that can help reestablish a good connection to the iTunes Store on your iPhone.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen -
Hello,
please help me how can i log into my i phone5 s as i don't have the passwared for the previous owner as well as the contact.
please advice what to do.You cannot proceed without the password. You will have to take it back to the shop and demand a refund or a replacement - they should not have sold you a phone which had not been completely cleared of all associations with the previous owner.
-
So I just transferred my stuff from my first iPhone Ito my new one. Now I'm trying to log in to iTunes/apple account but it's not letting me. I can still log into apple on old phone
What happens when you try?
-
I can't log into my iTunes account on my iPhone 5s. I logged out a few days ago to trouble shoot because I was trying to redeem some iTunes cards but when i pressed redeem nothing happened. I then tried to log back in immediately afterwards. I was unable to do so. After clicking "sign in" at the bottom of the apps main page, it brought up another menu where I clicked "Choose existing Apple ID". After pressing this the menu disappeared and nothing happened. I tried this multiple times and received the same result each time. I tried the other available option of creating a new AP ID to log in with and that one worked perfectly fine. I am clueless as to why the log in for me is either not able to load or just completely blocking me from getting back into my iTunes account on my phone. Not only can I not listen to the music I currently have, but I cannot log in to purchase the new music that I wanted to with my unused iTunes gift cards
I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3 -
Exchange 2013 - Admins can only log into one ECP server
Simple run down of my environment:
• Two AD sites (Site1 and Site2)
• One 2008 R2 domain controller at each site (DC1 w/ FSMOs and DC2) running AD forest function level 2008 R2
• One 2012 Std server with Exchange 2012 Std CU3 at each site (EX1 and EX2) – CAS/MBX on both, No DAG
• Half of mailboxes on each server
Using https://webmail.domain.com for all of our internal and external virtual directories. Adding /OWA or /ECP will get you into the respective site from either internal or external.
All Domain Admin/Exchange Admin (Organization Management) do NOT have mailboxes. Those individuals can log into ECP from https://webmail.domain.com/ecp, or FQDN or IP of EX2 only. If John Smith has no mailbox then he must use:
https://webmail.domain.com/ecp
or
https://ex2.domain.com/ecp
or
https://10.16.109.31/ecp
If EX2 goes offline or they use https://ex1.domain.com/ecp or https://10.16.108.31/ecp then none of the admins can login and they get the following:
Use the following link to open this mailbox with the best performance:
https://webmail.domain.com/owa/auth.owa
X-FEServer: EX2
Date: 2/18/2014 10:37:42 PM
s ECP or the https://webamil.domain.com/ecps ECP.
They can access EMS from either server and run Get-ECPVirtualDirectory and it shows what we would expect:
– https://webmail.domain.com/ecp
– https://webmail.domain.com/ecp
Why can an admin with no mailbox only log into the ECP on EX2? What is forcing the login to EX2 only? How can I move that “forced login” to EX1 if we ever get into a situation where EX2 is having problems? What happened in Active Directory or Exchange that
made EX2 the primary login server for ECP and OWA? My FSMOs are located at Site 1…the same location where EX1 is located. The same server that I cannot log into ECP directly.
~RickAny admin that is mail enabled can then only log into the server that hosts his mailbox. Admins without mailboxes can only log into EX2. And again, all admins can log into https://webmail.domain.com/ecp unless one of the servers goes offline
and that's when the problems occur. Nothing obvious or unusual regarding mail flow. Done various internal and external tests and have not seen anything obvious or in the logs.
Yesterday's change that MS Support had me do was to delete the ExternalURL for the ECP virtual directories. No difference. So, my latest update from MS Support that requested me to try today's change...
set-owavirtualdirectory “owa (default web site)” -RedirectToOptimalOWAServer $false
After performing an IIS reset and making sure replication had completed there was no difference. So, I am now forced to wait till Monday for MS to respond if the pattern stays at one email per day.
Has anyone with multiple servers at different AD sites been able to log directly into the either server like I'm trying? I get this problem in my labs and I even had MS, while on the phone, remote in to make sure I was setting it up properly.
The guy on the phone never said if their labs do the same thing cause they don't have multiple AD sites in their labs. In my lab if I have two servers at each site then I can log into both servers at the site, but not the other site. It appears it becomes
site dependent then.
MS has taken numerous logs and they are acting like this is the first time they've seen this. Yet I can reproduce it with no problem time after time. I'll create new VMs and start all over from scratch and make this happen every time I create a new AD/Exchange
environment (it does take me a while to build all those VMs from scratch). No fancy GPOs to AD and no radical changes to the Exchange servers. Other than obvious config changes to make sure email can flow internally and externally, this is pretty much out
of the box.
~Rick -
Can't log into server after 10.5.5 update
After running the 10.5.5 update on our Intel Xserve, it keeps getting stuck at the login window. I typed in the correct admin login info, the window would go away as if it was going to the next step, then it came back again. All services are running fine and I can get on via SA and WGM (from another computer) but not to the Desktop (via Remote Desktop). I noticed every time I try to log on (correctly) as admin, the whole service would restart. I get this from the Terminal window while I ssh and logged in from another computer after hit the Log In button: Sep 16 11:23:17 server1 loginwindow[2249]: Unable to load Info.plist exceptions.
Any ideas? I am afraid to update the other Xserve now..... Thanks!I have a similar problem, although with 10.5.4 rather than 10.5.5... Seems all services work, however, I can't log into the Finder.
I just set this server up 2 weeks ago, so was able to give the users back their previous server for the time being. However, after an hour on the phone with Apple, their techs have exhausted all ideas. Here's what I've tried so far with prompting from Apple...
1. boot from dvd, run permissions and disk repair
reboot. no difference
2. from a remote machine, access WGM, add new user, check home folders of existing users, check permissions, create another administrator user with a new home, try again with new user, no difference.
3. wipe preferences via Terminal: boot single user, mount -uw /, run mv /Library/Preferences /Library/Prefencesold
reboot. no difference
4. changed preferences back to where they were by removing new (rm), and renaming old (mv) - still no access to finder
5. suggested remotely installing 10.5.5 as last resort - this is the last idea the Apple technician had. I haven't done it yet.
It seems to be a corrupt finder or login issue more than a server issue as all services are running fine
6. In single user mode again, I tried a rm .AppleSetupDone which allowed me to recreate the server user and settings, but still did not allow access to the Finder.
7. One of the other techs here suggested safe mode, hadn't tried that. - still wouldn't allow me to log into the Finder
8. Tried boot from Disk Warrior DVD (latest version) - wouldn't boot
sigh...
Ideas anyone? I'm close to wiping and rebuilding this server, however the user permissions are a little bit intricate so it would sure be nice to get it running again.
thanks, Dave -
Submitted: October 25, 2012 01:09 PM Eastern
1. Product Name and Number
• HP Officejet Pro 8600 Plus e-All-in-One Printer N911g
2. Operating System installed
• Windows 7 64-bit, using IE 9 to access the ePrintCenter
3. Error message
• "Ajax submit failed: error =403, Forbidden"
4. Any changes made to your system before the issue occurred
• installed new HP 8600 printer this past weekend and everything seemed to work fine. Now I am "Forbidden" to log in???
5. In the subject title, include a brief, specific description of the problem, and your product information
• Can't log into ePrintCenter
i did not select snapfish as discussed in other posts. i have waited from yesterday as suggested in other posts. site doesn't respond to forgot password request to resend password - i click the "OK" button, but nothing happens. i tried to create a new account but get the same "Ajax submit failed: error = 403, Forbidden" error message.
is there anyone at HP that could help? no phone numbers? no email contacts?
help. please...
This question was solved.
View Solution.Hi,
Please refer the link below to troubleshoot on the issue.
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Error-Message-Ajax-submit-failed-error-403-For...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
HT4436 my mom lost her ipad. can I log into her icloud account on my iphone 5
My mom has lost her Ipad. Can I log into her icloud account from my iphone 5?
What To Do If Your iDevice Is Lost Or Stolen
What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices) -
can someone help me? I tried to log into facebook using my macbook and the address just spools or is stuck. I can pull up other sites when I type them in with no problems. I can also log into facebook via my desktop, phone but not the macbook. I appreciate the help.
thank youTry logging in with your @ Facebook email address. You can find it in Facebook settings from your browser.
-
New users can't log into /mydevices or /profilemanager
Hi all,
I've got Profile Manager up and running and have deployed about 25 iPads using the current setup.
My configuration has not changed but all of sudden, new users created today can not log into /mydevices or /profilemanager. Says the username or password is incorrect, but they're entered properly. Again, the configuration of the server has NOT changed since users entered (and working) last week.
Anyone have this issue? If anyone can shed some light, I'd really appreciate it.
Apple: Lion Server is buggy as ****. Profile Manager is buggy as ****. I've spent hours on the phone with Apple support with one issue after another. I'm getting sick of the instability and crankiness of Lion Server. These forums are chalked full of people having such a massive range of issues that I can only draw one conculsion: Lion Server is half baked.
Please help (again),
ChrisI got my problem solved - and here is a few things to note and some steps to resolve the issue.
1) you do not need to create augmented users - unless you need extra settings for local logins (you most likely won't have users logging into your mav) - if you are using AD that is - if not just create local users
2) server is buggy - perhaps - but after dealing with this issue for a few days - as much as i want to agree with it i want to say that now it is running very smoothly - and it boils down to order of steps in the install
4) do not change hostnames once it's set up - that will scre it up even worse
here is what i woudl suggest to blow it away and reset it up
1) system pref - users and groups - login options - network account server - edit - unjoin the domain
2) blow away your open directory and profile manager in command line
sudo /usr/share/devicemgr/backend/wipeDB.sh
sudo slapconfig -destroyldapserver
3) reset apache web config
sudo /serveradmin command web:command=restoreFactorySettings
4)make sure your hostname is correct
5) join domain (if needed)
on command line veryfiy ad is working by typing
user "username" where username is username of AD user
6) if AD set up - check dns search order - make sure no local host (127.0.0.1) is in the list
system preferences - network - ethernet - advanced -dns - remove 127.0.0.1 if there (only if using AD)
6) server admin - open directory - settings - change - set up as standalone
configure yoru ldap server - this will reissue signing authority certificate that you will need if you want to sign your configurations profiles for clients (iOS and Mac)
7) then configure profile manager
Reboot after step 2 - step 3, step 6
if you have a firewall infront of the server there will be aditinal ports required for SCEP
http://support.apple.com/kb/TS1629
you will need port 80,443 and 1640
If you have a reverse proxy you will need to set up a trust to the cetificate on the proxy to the authority configured in the open ldap - different topic - but just tought it was worth mentioning -
Please help - I've upgraded to ML 10.8 (and also 10.8.1) and i can not log into icloud.
I get an error saying "You can not log in at this time". I have no hair left on my head because I've pulled it all out!
Now, there are many published fixes for this, but NONE work. I've tried everything I can find:
Yes, I have an AU and US apple ID, and both dont work
I installed ML from a fresh disk wipe + install. No baggage from previous OS's.
Everything is standard, no tricky fixes or apps
No Little snitch installed
Have deleted the ~/Library/App Support/iCloud folder
Have deleted any preference files
Have opened up the permissions on the ~/Library/Caches/iCloud folder
Have reset keychain
Have deleted all references of any @me or @apple accounts
Have re-installed the ML OS from a DIFFERENT bootable USB stick
No proxies, SOCKS, or mods to network
Plain old home WIFI network, never had a problem
Have icloud successfully set up at work (QC 2.8GHZ Mac Pro 2010), on my iPhone, iPad and Macbook Pro - Zero issues
The mac having problems is a 2008 iMac, Core2Duo 2.8ghz Intel w 4gb 1067mhz ram) - Runs well, use for design.
Is it a problem with the iCloudHelper process not having sufficient permission to write to the iCloud user DB? or the Accounts folder?
Have looked into console, and when I try and log into iCloud, I get these three errors. Same every time, no matter which apple ID account you use:
1: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store key, couldn't add kc item, error 100013 (service=iCloud, dsid=146089737)
2: AOSKit ERROR: (System Preferences[352]) AOSKC ([email protected]): Failed to store account info key (dsid=146089737).
3: AOSKit ERROR: (System Preferences[352]) Failed to store account info for appleID=[email protected]
Please help! Is this an incompatibiloty with the iMac problem, or a ML problem?
Much appreciated
RickWhere EXACTLY are you trying to log in to it?
Through your web browser at iCloud.com?
Or through the iCloud system preferences pane on your Mac? -
How do you stop mobile sites from loading in safari automatically on my iPad? I can't log into mobile me because of this.
The me.com website is not designed for or intended to be accessed by iOS devices. Apple provides support in iOS or seperate Apps for accessing all aspects of MobileMe except for the Accounts section.
Use MobielMe as intended and you'll have no problems.
See: http://support.apple.com/kb/ts1673
Even if you use a different browser to get access to me.com on iOS, you'll find most of it is unusable.
Other websites that present you with the mobile version have been programmed to do so by their developers. They specifically look for users accessing from 'mobile' devices and switch to the mobile site. Many such sites provide a link to go back to the 'full' site, if not, there's not a lot you can do except use a browser that can pretend not to be a mobile browser. -
Can you log into CC on two computers on the same IP address at the same time?
Can you log into CC on two computers on the same IP address at the same time? Because i accidentally opened both and was wondering if it will affect my membership or deny me access to CC. Thanks
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both subscriptions MAY be in use at the same time https://forums.adobe.com/thread/1683787 -
I have a Mac mini running the latest version of OS X and Server. Been running fine and flawlessly. However, I had a strange problem with the iCloud preferences panel crashing when I tried to access it, so I rebooted. Now I can not log into the system with any accounts. My master admin account (along with all the others) gives me the error:
You are unable to login to the user account "abcdefg" at this time. Logging in to the account failed because an error occurred."
I am able to see the server from other macs and I can log into it using the same account, but it only shows me a few of the shared folders I have access to but NOT to my main directories.
Rebooting into Command-R and doing a disk utility, I try and repair permission on that drive and get a bunch of errors like:
ACL found but not expected on Users
Repaired "Users"
ACL found but not expected on Users/.localized
Repaired "Users/.localized"
ACL found but not expected on Users/Shared
Repaired "Users/shared"
ACL found but not expected on Users/Shared/.localized
Repaired "Users/Shared/.localized"
Permissions repair complete.
But rebooting is no joy...same problem. Any idea what is going on or how to repair it? Should I do a time machine restore? Complete new OS X install? Any idea what is causing this or how to salvage it?Got everything to re-install and it worked fine...for a few hours. Then I came in to find ALL of my network users deleted. Just GONE. Then found out the Open Directory was trashed and was unable to open, recover or restore from a backup. Looks like I may have a bad drive here.
I installed a new drive in the system, re-installed and so far (for a couple of hours anyway) the system seems to be working and stable.
Maybe you are looking for
-
MAJOR Zen Vision: M 30GB PROBLE
First, when trying to recover my computer after some problems, the software no longer worked with my ZEN. I didn't want to install another Service Pack and potentially lose everything else I had, so I just started using Windows Media Player to add mu
-
German keyboard for my new MBair that I want to order in the US
Hi, I am travelling in a couple of weeks to the US and wanted to order upfront online a new MBair. Does someone knows if I can order online a german keyboard so that by picking up the notebook (in a store) it will already assembled? The western spani
-
Keynote 3 and Quicktime videos
I had keynote 2. Did some cool slides that i exported to final cut express as a qt movie. and put it in my timeline no problem. I upgraded to Keynote 3 now and can export a slide as a qt mov. but CANNOT import ANY QT movies into fce. Is there a compa
-
Help using vb on a control variable from a datafile
I have a rectangle box that I want to make visible or invisible depending on the value from a data file, like binary, 1 or 0. Once I create the rectangle box, and attach the field, how do I create the vb which controls wether the box is visible or no
-
I saw a quick Firefox notice at the lower corner of my screen about security updates available or being installed so when I checked to see what they were, I found an installed update 3.6.7 on 7-20-2010, and the next one 3.6.8, said installed on 12-31