Can't login to Admin Console after period not using

Hi,
We have portal 3.0P4 on Solaris 8 (gateway and server seperate systems) and have always the same problem.
After a time, not using the admin console, we're not allowed to login anymore.
We get the following message: Your Admininstration Console login session has timed out.
The auth log says: Login Failed Unix initialization LoginExceptionI/O exception trying to
connect to Unix service UserDomain /<domeinname>
Only after restarting the portal, it works fine again. This is not a solution with a production system!
Can someone help ...
Thanks in advance.
Greetings,
Miranda Heesbeen

DId you try restarting just the Unix auth helper (doUnix) process instead of the whole ipsserver?
Sometimes even if the process is running it has a problem.

Similar Messages

Can't log into admin console after install

I have installed CF10 on an Amazon AWS Windows 2012 instance. No matter what I use for the admin console password during setup, the password is not recognized when setup is complete and I try to log into the admin console. I've uninstalled and reinstalled four times trying simple as well as complex password with no luck.

Try to login from your machine rather than server itself with different browsers.
Also, run the passwordreset.bat(C:\ColdFusion10\cfusion\bin) and try to change the password. Then login.
HTH
Thanks
VJ

Can't login to repository DB after installing EM using response file

Anyone can help me?
I installed EM 10g grid control 10.1.0.3 on solaris 9, it was a silent installation with response file, with new db. I specified the passwords for sysman, sys,system and dbsnmp in the response file, the installation went smoothly, but after that, when I tried to login to the repository database using the passwords which I set in the response file, it told me that my password was wrong! but the account status are all 'OPEN'. So I have to change the passwords mannually again. Is it OK to specify password in the response file?
Anyone can help me?
The following were the account status after EM 10g installation
SQL> select username, account_status from dba_users;
USERNAME ACCOUNT_STATUS
SYS OPEN
SYSTEM OPEN
DBSNMP OPEN
SYSMAN OPEN
MGMT_VIEW OPEN
PERFSTAT OPEN
OUTLN EXPIRED & LOCKED

Hi daryle
the passwords are all "password" or "sysman", no funny chars.
the following are the required items in the response file
FROM_LOCATION="/opt/install_em_grid/Disk1/stage/products.xml"
ORACLE_HOME="/opt/app/oracle_em/product/10.1.0/em_1"
REMOVE_HOMES={"/opt/app/oracle_em/product/10.1.0/em_1"}
s_mountPoint="/opt/app/oracle_em/product/10.1.0/em_1/oradata"
s_reposPwd="sysman"
s_reposPwdConfirm="sysman"
s_passwordChoice="D"
sl_adminPwds={"password", "password", "password"}
sl_adminPwdsConfirm={"password", "password", "password"}
s_dbSid="emrepos"
s_globalDBName="emrepos.home.com"
I installed again with this response file, everything going up ok, the only problem is that I can not login to the respository database with the password i set in my response file. that means I HAVE TO change them at the db site.

AMS 5.0 on Amazon: Fresh install can't get past admin console login

Hi there,
I created a fresh Adobe Media Server 5.0 instance on Amazon EC2 AWS and followed all instructions in this document:
http://help.adobe.com/en_US/flashmediaserver/configadmin/WS5b3ccc516d4fbf351e63e3d119f2926 bcf-7ff4.html
- I added the admin user to ams.ini
- created a user password using ./amsadmin -console -user <username>
- opened all necesarry ports.
- tested port 1111 using telnet successfully
However I still can't login.
I did the ping test using:
<ipaddress>:1111/admin/ping?auser=username&apswd=password
when using an invalid username/password this returns:
<result><level>error</level><code>NetConnection.Connect.Rejected</code><description>Admin user requires valid username and password.</description><timestamp>Sun Nov 18 15:02:59 2012</timestamp></result>
but with a valid username/password combination it just redirects the page endlessly until the browser stops.
Is there anybody out there who can give me a hint?

Little strange. But just want to be clear - you tried http command and with valid username/password you are not able to run "ping" http command - right? Can you juct check your Admin Server configuration and restart Admin server once and see if it helps. Also do you see any errors in logs - say master, admin logs?

Unable to access application set in admin console after upgrade to 7.0 M

Hi Experts
I am unable to access the Application Set through BPC Administration after upgrading our development server to version 7.0 SP3. I followed the instructions as per the Upgrade guide, and there was no issues during the installation. But when trying to access the application set i receive the following error message on step 9 ( 9/10) of during the connection.
Error message: Subquery returned more than 1 value. This is not
permitted when the subquery follows =, !=, <, <= , >, >= or when the
subquery is used as an expression.
I have done all of the steps outlined as per SAP Note 1242962, but i still receive the error message. I tried to do a SQL Profiler trace, but i have been unable to find the query which returns more than one record.
Any help is appreciated
Kind Regards
Daniel

Interesting that you ask about upgrade vs uninstall/reinstall.
We were running BPC 5.1
We have also re-installed the Admin client to be the new version.
We have been working with an outside consulting firm to manage our system upgrade/install.
Our dev and qa environments were uninstalled then reinstalled.
When we went to production, our system was intially upgraded. I do not know why this route was chosen when that was not what was completed on dev/qa. On our production 'upgrade', we are still working through issues. We then uninstalled iis, sqlserver reporting services, both .net 1.1 and 2.0, and the BPC application. Then reinstall everything and we were getting the same errors.
Our error was at Progress 10/10 Create Database Schema and check Application server collation.
Error Message: Object Reference not set to an instance of an object.
We are able to access the appShell and test copies of the appShell, we were not able to access any custom appSets which were created prior to the upgrade, nor are we able to access any appSets that were created as a copy of the custom appSet after the upgrade.
When logged with SAP, we were directed toward note Note 1331040 - Cannot log into 7M Admin console after restore from version5 noting that we needed to do the following changes:
Note that you will need to change the following:
INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.112')
INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.112')
to
INSERT INTO tblDefaults VALUES ('_GLOBAL','Prev_AppSet_Version','','','7.0.113')
INSERT INTO tblDefaults VALUES ('_GLOBAL','Curr_AppSet_Version','','','7.0.113')
The reason is because '7.0.113' means 7 MS SP04 while '7.0.112' means SP03.
There are 8 steps in this note, for us, only the first 2 were needed. I have asked SAP to create new note/update existing accordingly.
With the table entry, we were able to successfully access our app set.
Hope our experiences can help you out.
Thanks,
Becky Zick

Poor performance on admin console after adding 1k+ teams and member profile

We run v7sp3p2 (MS) now but even back on v5.1 see degraded performance in form of response times over 60 seconds when browsing security hierarchy in admin console after adding over 1000 teams and member access profiles. We need the granularity in access for our many users. Does anyone know any tricks to prevent the glacial and disappointing response times while maintaining the necessary security? This behavior reflects poorly on the product's scalability.
Thanks,
Erik

Sorin, I want to make sure I understand your recommendation.
First, we do have more than 1000 users. Each location has a unique team to which their users belong, and each of these teams has a member access profile with corresponding read/write access to the dimension member representing their location. The users at each location only view data for their own location.
Is your recommendation to use another interface besides the admin console for accomplishing security updates?
We have a custom package that uses an API to upload data files with mass updates to security assignments and definitions, but hesitate to use this method for mundane changes for add/remove/change just a few users as this method bypasses the domain validation we get on the front end wherein we can only add users to the domain they correctly belong to.
To dodge the risk of a bad user/domain matchup we'd like to use front end but it appears to not support our scale well.
Thoughts on a setting or configuration we could manipulate to resolve the poor performance would be great - what levers can we pull? If this is all the tool can support we just live with it and pay the cost in wasted man hours over the life of the product...

Can't login Oracle BPEL console

Oracle BPEL PM shows 2 errors:
1、<2009-03-05 15:20:35,383> <ERROR> <default.collaxa.cube.engine> <DomainObserverRegistry::load> Failed to locate observer class oracle.tip.esb.configuration.deployment.bpel.BPELSvcDeploymentManager
2、<2009-03-05 14:59:24,836> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://pce-01:9700
then i can't login Oracle BPEL console with domain "default" and default pwd "bpel".
How can i solve this problem and login BPEL console ?

For the errors :
Oracle BPEL PM shows 2 errors:
1、<2009-03-05 15:20:35,383> <ERROR> <default.collaxa.cube.engine> <DomainObserverRegistry::load> Failed to locate observer class oracle.tip.esb.configuration.deployment.bpel.BPELSvcDeploymentManager
2、<2009-03-05 14:59:24,836> <ERROR> <collaxa> <ProcessJob::execute> Timed out reading http://pce-01:9700
You may be having a have a DNS entry issue:
http://pce-01:9700/BPELConsole
Change on your workstation the hosts file; c\windows\system32\drivers\etc\hosts
add the entry
127.0.0.1 pce-01.<fully quaified domain name>
127.0.0.1 pce-01
Restart the SOA Suite.
Also, regarding the BPEL Console login, generally by default its welcome1, unless you have given a different password at the time of installation when running the irca.sh scripts to create orabpel/oraesb/orawsm schemas.(for SOA Adv install). However, in SOA Basic install, they get installed in olite db, so welcome1 is generally the default password.
Hope this helps!
Regards
Anirudh Pucha

Can I save a Toshiba recovery after years of use?

I saved a recovery when the computer was new, but that saved copy is not available now. Can I save a recovery again, even after years of use? I am having computer problems, so i plan to do a system restore and hope that all returns OK to an earlier good version. Before I start that system restore, however, I would like to have a recovery point saved as a backup in case the system restore does not work properly. I will start that system restore in a few hours, so any quick replies will be much appreciated. Thanks!

Satellite L855-S5240
Can I save a Toshiba recovery after years of use?. ... I did a system restore and it worked great, so no need for a Toshiba recovery.
That's fine, but you still need the recovery discs for possible use when, for instance, you need to restore to a new hard disk.
The answer is Yes you can. For instructions, see the section Creating recovery media, which begins on p. 65 of the User's Guide.
Satellite/Satellite Pro L800/S800 Series User’s Guide

When I updated the new version and used icloud, some of the apps are missing, how can I find those apps(but i was not using my account to download some apps before). Please advise.

When I updated the new version IOS5 and used icloud, some of the apps are missing, how can i find those apps (but i was not using my account to download some apps before). Please advise.

They are free to iOS 7 users who have activated their NEW device on Sept 1 2013 or after. They are NOT automatically free with iOS 7.
AirDrop is only compatible with iPad 4th gen and iPad mini. iPad 3rd gen and below do contain the necessary hardware for AirDrop. Also, AirDrop is only compatible between iOS devices. You cannot AirDrop between iOS device and Mac OS.

How can you sync ipad 2 photos to pc not using the cable or icloud sync?

How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple store

I have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.

Why can't weblogic login discussion admin console?

I create webcenter domain and startup successfully. I wanna change some jive properties at jive console(http://host:port/owc_discussions/admin), but i can't login. I can login in ( http://host:port/owc_discussions ). Why?
Any comments are welcome!

The jive tables created by RCU can't be reused by webcenter domain.
Edited by: Yekkis on 2010-3-21 上午10:14

I can't login to admin account properly after installing Lion

It's been a week since I installed OS X Lion and everything was fine until a couple of days ago. When I was logging in to my account (an admin account), I could not get past the gray screen with the spinning rainbow wheel, or my desktop would show up but doesn't show any progress. I've already tried booting on Safe Mode and it worked, except that the audio input/output were disabled. I tried logging in to the other accounts and I didn't experience any problems. Please help me, I really don't know what I should do to fix and resolve this problem. Thanks in advance!

Hi rodeo21
Did you enable this particular admin account when you enable FileVault?
Have a look at STEP 2 on this page: http://www.macworld.com/article/1162999/complete_guide_to_filevault_2_in_lion.ht ml

No application showing in planning web & can't connect to admin console

Hi,
Planning web screen showing 'No aApplication available" even though I worked with planning application yesterday also and after that I am sure nobody have deleted that application. Also I can't login into essbase admin console as it is showing "cannot connect to administration server" though I have checked in services console that hyperion administration services is running.
One exception I got is shared services is not running. So I started that but after some time automatically went to stopped mode. Then I stopped all the services and restart the server and restart the services sequentially---- no hope. Same problem still there.
Can you please suggest how to solve the aforesaid?
Thanks & Regards.

Hi,
Thanks for your reply. I have tried that but still the same error having in admin console. I have not craeted/modified anything in planning cluster in last some days. The problem is that all services is started properly except 'shared services' service. When I go to start that it is starting and showing started but after some time, automatically stopped. I also tried the following-----
1) Stopped all the other services except OpenLDAP
2) then started the shared services from start-> run-> hyperion-> foundation services-> start shared services
and got the error like---
Driver][Oracle]ORA-12505 Connection refused, the specified SID (xxxxx) was no
recognized by the Oracle server.
Database configuration test failed. Use Configuration Utility to configure the
atabase connectivity
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Attempting to connect to database: Retry Count: 1
Unable to connect to database. Will try to re-connect after sleeping for 30 sec
nds...
Don't know what is happening....Any idea about the same? How could the problem be solved?
OR should I reinstall hyperion afresh.....
Regards.

Cannot install Creative Cloud - cannot login to Admin console

Hi,
I'm trying to install Creative Cloud. I've received a user guide... Now trying to login to the Admin Console so I can send invitation to myself (?) and on colleague who also shall have Creative Cloude.
I can't login!
I've received a mail with info about VIP no etc.
We bought Creative Cloud in the end of November, but I've not had time to install until now.
And... now when I want to do this, it doesn't work.
Need help!
Want to start with Creative Cloud! :-)
Regards
Annika Andersson Lundvall
Marketing Communication Manager
AB Hallde Maskiner
Sweden

Annika, this forum is only for discussions on the forums themselves. The Creative Cloud one is here:
http://forums.adobe.com/community/creative_cloud
although in this case you may fine this thread more useful:
http://forums.adobe.com/community/download_install_setup

Can't login to Admin Console after period not using

Similar Messages

Maybe you are looking for