Can't log into admin console after install

I have installed CF10 on an Amazon AWS Windows 2012 instance. No matter what I use for the admin console password during setup, the password is not recognized when setup is complete and I try to log into the admin console. I've uninstalled and reinstalled four times trying simple as well as complex password with no luck.

Try to login from your machine rather than server itself with different browsers.
Also, run the passwordreset.bat(C:\ColdFusion10\cfusion\bin) and try to change the password. Then login.
HTH
Thanks
VJ

Similar Messages

Can't log into Game Center after installing Mavericks

I haven't been able to log into Game Center ever since I installed Mavericks.
When I try to open it through Spotlight, I get a "Game Center quit unexpectedly" message.
When I open it directly through the Apps folder, it opens fine, but I get this message when I try to log in:
Couldn’t communicate with a helper application.
Try your operation again. If that fails, quit and relaunch the application and try again.
Any help would be greatly appreciated!

Can anyone help please I have been able to download apps send and receive emails.. Just not log into Game Center has anyone got any idea what is going on please. Both Game Center accounts are on the same devise but that has been working up until now.....

Win svr 2008 r2 ent - user can not log into remote desktop after installing march's 2015 important updates

we installed march's 2015 important updates onto all of our servers. three of our servers are not allowing RDP.
these servers have windows server 2008 r2 enterprise sp1 installed.
we enter in the username and password in the rdp dialog box and click on ok. the rdp dialog box comes back for us to enter in the username and password.
we do have kb3046049 and kb3002657 installed.
is there a v2 of kb 3002657 for windows server 2008 r2 enterprise?
on one of the servers
1. I disabled rdp
2. stop and start the following services
remote desktop configuration
remote desktop services
remote desktop services usermode port redirector
remote procedure call
3. enabled rdp
4. added the users allowed to rdp into server
This allowed us to RDP into that box with the username and password.
But the other two servers the steps performed above did not work.
Any solutions for Win Svr 2008 R2 enter sp1?

Thursday, March 19, 2015
This is a summary of the new and changed content scheduled for release on Thursday, March 19, 2015.
New security content:
This has nothing to do with this issue in this thread, it just happens to have been published today and yet no kb is public.
Security Update for Windows Server 2003 (KB3048051)
Locale: All
Deployment: Windows Update, Microsoft Update, Automatic Updates, WSUS, and Catalog
Classification: Security Updates
Target platforms: Windows Server 2003 and Windows XP
Approximate file sizes:
Windows Server 2003 update: ~ 196KB
Description:
Install this update to resolve an issue which requires an update to the untrusted certificate store on Windows systems and to keep your systems up to date. After you install this update, you may have to restart your system.
http://support.microsoft.com/kb/3048051
It is related to the SSL cert revocation and Microsoft is very lame these days and gets the code on MU but can't sync up the KB.
See:
* Microsoft Security Advisory (3046310)
- Title: Improperly Issued Digital Certificates Could Allow Spoofing
- https://technet.microsoft.com/library/security/3046310
- Revision Note: V2.0 (March 19, 2015): Advisory rereleased to
announce that the update for supported editions of Windows
Server 2003 is now available. See Knowledge Base Article 3046310
for more information and download links.

Can't log into Ent.Man after 10g install on win xp pro.

I've been reading posts about this all day but still can't login.
I followed the instructions and installed a loopback adapter first.
10.10.10.10
255.255.255.0
Then I ran the install and that went fine.
The services are started, DBConsole service, listener service, oracle service, sqlplus service.
I followed the instructions and checked the local security policy for the "log on as a batch job" policy.
I can log into sqlplus with sysman/password that I created during the install.
Followed the instructions to make sure the accounts were unlocked with sqlplus.
Through internet explorer the login page comes up fine for
http://kir_64xp:1158/em
http://kir_64xp:5500/em - the second database I created with the database config assistant
http://10.10.10.10:5500/em
If I try to login with sys as normal, I get a message telling me to log in with sys as sysdba.
When I change to that it just refreshes and comes back to the login screen - no error.
If I try sysman as normal it just refreshes back to the login screen.
If I try sysman as sysdba then I get the error that I am using an incorrent username password.
If I use the administration assitant for windows I can connect to both of the databases with sysman or using OS authentications as sysdba.
I disabled my firewall software - that didn't help.
Any information would be appreciated,
Thanks.

I found this other post (Thread: New install 10G on XP professional) with the same problem.
Using Firefox instead of IE solved the problem.
I tried changing the security settings and pop up blocker settings but still could not get IE to work. If anyone knows what to change on IE to get it to work I'm curious. Other than wasting 3 hours of my life I'm good.
Thanks.

Can't log into User Account after disrupting external hard drive

I keep my account (Admin) on an external hard drive due to the large volume of data. I mistakenly pulled out the USB cable to the drive while trying to resolve another issue. Subsequently, it appeared a lot of my data was missing. I restarted the computer and couldn't log into my user account. It seems pulling the USB cable to the external drive corrupted something. I verified both disks (internal & external) and all was OK. I ran Disk Permissions and tried to repair. The resultant information is attached at the bottom of this message.
I can access my data on the hard drive from my laptop over the network. I just can't get into my user account directly. Any ideas on how I can address this issue?
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
Permissions differ on "Library/Frameworks/HPPml.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Frameworks/HPServicesInterface.framework", should be drwxrwxr-x , they are drwxr-xr-x .
Permissions differ on "Library/Printers/hp/Frameworks/Matterhorn.framework/Versions/DI_MH.A.05.01.001 /Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .
Permissions differ on "Library/Printers/hp/Frameworks/ResourceManager.framework/Versions/DI_RM.A.04.0 7.000/Resources/Info.plist", should be -rw-rw-r-- , they are -rwxrwxr-x .

There may have been another solution to this problem but I went the route of creating another user name and migrated the data over to that name. Thank you!

Can't login to Admin Console after period not using

Hi,
We have portal 3.0P4 on Solaris 8 (gateway and server seperate systems) and have always the same problem.
After a time, not using the admin console, we're not allowed to login anymore.
We get the following message: Your Admininstration Console login session has timed out.
The auth log says: Login Failed Unix initialization LoginExceptionI/O exception trying to
connect to Unix service UserDomain /<domeinname>
Only after restarting the portal, it works fine again. This is not a solution with a production system!
Can someone help ...
Thanks in advance.
Greetings,
Miranda Heesbeen

DId you try restarting just the Unix auth helper (doUnix) process instead of the whole ipsserver?
Sometimes even if the process is running it has a problem.

TREX httpserver red in TREX admin console after install v7.0

I have installed TREX version 7.0 and the httpserver is red in the Services tab of the admin console. When I try to restart it it states "Access Denied, you must be an administrator of the remote computer to use this command."
I am positive that the tsxadm id that I am using is an administrator, since I have checked. Is it trying to use a different id that I am unaware of?
Any help would be greatly appreciated.
This is on a windows 2003 server SP1 with IIS 6.0.
Thanks
Paul

Apparently it was a DCOM error that seems to be fixed after implementing MS KB Article 913119 since I can now restart the server. However it is still in red and has the following error in the trace file:
[2156] 2007-10-30 10:30:35.774 e NameServer TREXNameServer.cpp(00833) : Wrong response from http server: http://qbw02vl1:30305/TREXHttpServer/TrexIsapiExt.dll, status:200, response: MZﾐ

Can't log onto Admin console, Can't pay overdue invoice, website deactivated - No Support possible!!

Hello there!
As the title says, I basically can't do anything right now, and BC support hasn't really been able to help me when I asked about this previously here in the forums (when the website was still active, which it now no longer is). When trying to log onto the Admin console all I get is: "ERROR: This site is currently unavailable. For more information please contact: (My name)." And yes, I'm the administrator. I created the website using Adobe Muse and published it using that. There has been no other party involved, except for Godaddy.com where I bought the domain.
Unlike I've been told it should be, I do not get and never got a form to fill in my payment details upon logging onto the admin console.
I also get and did get that exact above error message when trying to submit a support ticket, so the only place I've been able to ask at is here.
As I mentioned in my earlier post, I wasn't able to correct my credit card details when the card was no longer valid because I was on vacation, and somehow didn't manage to access that menu on mobile. A week later, I got another email, telling me that all admin services have been disabled until I pay the invoice. At this point I started getting the above error message. Now, another few weeks later the website itself has been deactivated - I still can't pay the invoice.
As I'm not very used to doing the whole setup of a website, I definitely don't want to spend that time again, but simply just want to pay the overdue invoice!
Help is very much appreciated!
-Alex W.

Hi Alex,
Please submit a ticket via the following form and we will escalate it to the accounts team: http://www.businesscatalyst.com/contact
However, I can see that the site you may be referring to is set to bill the partner directly. Therefore you will need to log into the admin console of this site as the partner user, and you will then be prompted with a payment form to pay the outstanding invoice. It appears that [email protected] is the partner user assigned to this portal, so please try logging in as that user.
Thanks.

CF MX7 in cluster - can't log into admin

Hi All,
I'm setting up CF MX 7 in a clusterd environment with 2
servers (Win 2003, IIS6) and initially I could log into each
servers admin no problems. After a restart of both servers, I can
no longer get into either admin.
After typing the correct password, I see a quick flash of the
admin page and then i'm passed back to the login page, if I
deliberate enter an incorrect password, it doesn't flash to the
admin page, I just get a message with 'Invalid Password, Please Try
Again' on the login page.
This also happens if I go to the URL and try to access the
admin page.
Any have any ideas?
Thanks in advance.
Kieron

Try to login from your machine rather than server itself with different browsers.
Also, run the passwordreset.bat(C:\ColdFusion10\cfusion\bin) and try to change the password. Then login.
HTH
Thanks
VJ

Can't log into db console (insufficient privileges error at log in screen).

I have two system I just rebuilt and one server with same users and grants logs in fine, the other one gives me this error even on attempting to log in as sys as sysdba.
I read that I had to grant select_catalog_role and select any dictionary, which I did and it still will not let me log in.
OS:Linux AS4 update 8, Oracle 10g (10.2.0.4.0), attempting to log into dbconsole.
Any advice would be great. Is there a way to stop dbconsole and restart it- will that work? Or shutdown the database and restart???

my sysman user account was locked- I unlocked it and now I am fine.

Can't log into Snow Leopard after hardware repair.

I recently had the display repaired on my macbook pro. When I got it back I attempted to log on. My account was gone from the log in prompt and the only account choice was "Other". My account name and password no longer work. I then booted into windows to see if my data was intact and it is still there. How do I log into my account on Snow Leopard?

Other indicates that the repair station enabled the root user account. Contact them for the password they used and see http://docs.info.apple.com/article.html?path=Mac/10.6/en/11778.html for steps on disabling it and getting your account back.

Can't log into my icloud after IOS8 install. Cant use my phone.

Last night I finished updating the IOS8. I went through the prompts and it reboot installed, however when I went to the "set up" screen I choose English and it asked for my Apple password for the icloud. I have been entering that same password in and it wont take. I tried changing it and it still wont take. I can't use my phone at all because I can get passed the start up screen.

Hello kachinadoll73,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iCloud account issues:
iCloud: Account troubleshooting
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Can't log into ds console

Folks,
We are migrating from 5.1 to 5.2. So we installed 5.2, ran migration and then shutdown 5.1, changed port in dse.ldif to 389 and then started ds. I changed admin-serv/config/adm.conf to port 389 and then started admin server. When I run startconsole and log in here is the message:
for host <my host> trying to GET /admin-serv/authenticate, admin40_host_ip_check reports: Unathorized host ip=::<my ip>, connection rejected.
any thoughts?

I didn't really understand your problem, but i think that for sure you have two possible issues.
First one (hopefully): somebody in the domain can use the console then this person can add your ip address by connecting to the Administration Server, Networ tab, in the Connection Restrictions choose Ip adresses to allow, click add and then add your Ip address.
The second possible issue is that you changed your server port number before reconfiguring the console,
then you have to change it by editing the following files:
-serverroot/userdb/dbswitch.conf
-serverroot/admin-serv/config/adm.conf
-serverroot/shared/config/ldap.conf
-serverroot/shared/config/dbswitch.conf
Bye

Can't access the recovery console after installing the Windows 7 RC

Hi all,
I recently installed the Windows 7 RC to give it a go but I've found that it kills my battery life so I decided to go back to vista, however when I press the blue button on start up to access the recovery console I just get a screen that asks me if I want to enter the BIOS or choose another boot location... I used the upgrade option in Windows 7 so I don't see how I could have deleted the partition with the recovery console...
Is it posible for me to restore my tablet to it's factory settings?

The install of Win 7 removes the TVT boot manager applet and sets the master boot record to Win 7 partition only.
The Lenovo supported method of restoring your preload would be thru the use of Recovery CD's.
You might be able to change the bootable partition from the win 7 partition to the recovery partition, thru some
3rd party apps.
Terry
LESE
Win 7 beta test

Cannot Log into AIM account after multiple tries

This problem is a nightmare. I really do appreciate the support. Unfortunatly the fix is only temporary. Here is what is going on and what Fixes I have tried.
The problem is on my parents G5 power PC (~2006)
They have an AOL AIM account.
Ichat worked great for about 4 months.
Then the problems occurred (Can not log into AIM account after mutliple tries).
We have tried:
Switching to port 443 - this has not worked ever time we have tried it.
Deleting iChat.plist, iChatAgent.plist, and iChatAIM.plist (left the other ichat plists alone like Jabber, Agent, Subnet,etc)
This this restores ichat for about a day then back to the same problem.
We have also tried running disk utlity and repairing permissions and get it going for day some times.
Not sure what else is causing it to drop out and having to delete this times again and again? Any ideas?

On the Netgear
The Access IP is normally 192.168.0.1 and the User ID is admin and the password is password when the pop down appears.
----Under SYSTEM PREFERENCES>NETWORK It shows Airport Connected to "Netgear 192.168.1.3" do not see User ID or password on the screen?
In the menu on the left the last (or near last item) is UPnP.
Check this is Enabled.
----Do not see this listed anywhere
About two thirds of the way down the menu is WAN Set up
In hear Disable the Port Scan Line (It will read DOS (or SPI) and Port Scan)
There is another Line about "Blocking Responses to Ping on the WAN port" this needs to be Disabled as well (IChat sends a Ping to confirm where the Visible Invite went to is where the SIP stuff (In the Log about the error) is coming back from).
On the DNS info.
This should be two IP address normally that are on the Internet.
These should appear on the RCA if it is accessible in a web Browser but more likely on the Router's Set Up pages (or Some sort of Summary page).
A 192.168.x.x address points to the Router (I would guess in this case) and whilst some routes can be DNS servers as well it is not that common and is only really useful to link a MAC (Ethernet and/or WiFi Card - Media Access Card Address) info to a Name for the Computers that are attached.
----Not sure where to find all this in OS 10.5.8
----Under System Preferences>Network with Airport highlighted I click advanced and go to TCP/IP is see two addresses the ipv4 = 192.168.1.3 and the router=192.168.1.1
(I have presumed that there are no other DNS servers are listed and the 192.166 bit was a typo)
---Correct i put a typo as i was not sure if it was secure to post.
If the Computer can do Wifi as well as Ethernet it should not have both Connected to the Router at the same time. (iChat "Sees" it as two Connections to the Internet).
--- The computer is only connected via Airport to the netgear router.

Can't log into admin console after install

Similar Messages

Maybe you are looking for