Can't open Icloud. "The entry point not found". Can't reinstall until I open Icloud and log out but I can't access it.
I am trying to re-install Icloud, however I can't redownload until I uninstall Icloud, but I can't uninstall until I log out in the Icloud Control Panel. The problem is that I can't open Icloud to log out because it says Entry point not found. I'm having an issue with all aspects of this!
I see you still have your smc0. I'm working on my first attempt at OSB and Oracle support said we have to remove rmt0, rmt1, smc0 before we can install OSB. They saw it in the device list and said those devices must already be taken.
Is you setup working for OSB and regular mksysb & sysback too with the Atape.driver?
Similar Messages
-
HT1727 the entry point not found help
when i try to log in to itunes it tells me entry point not found i have went to the download site and chose the repair option several times and it doesnt help what else can i do.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
ITunes.exe - Entry point not found error after reinstalling
I'm not sure on when this started to happen
iTunes gives me this error even after i reinstalled iTunes several times.
iTunes.exe - Entry Point not found
The procedure entry point
AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library G:\iTunes.dll
After pressing OK, it gives me this
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
Thank you in advance.Hello crystal_qing
Check out the article below for general troubleshooting when you are having issues installing iTunes on your PC. You may need to remove content from the Temp folder and even remove iTunes and its related software and then reinstall iTunes.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
-Norm G. -
Adobe premiere elements.exe entry point not found
adobe premiere elements.exe entry point not found
how do I fix this error message and run the program?steinbeck wrote:
Premiere elements 12
On Microsoft windows Xp
Photoshop Elements 12 requires Windows XP SP3
http://www.adobe.com/products/photoshop-elements/tech-specs.html
Try installing Service Pack 3 on Windows XP.
http://support.microsoft.com/kb/322389
While you're at it, make sure your XP is fully up to date before installing PSE12. -
ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!
hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there. -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes
Hi, whenever I try to open iTunes I also get this message:
iTunes.exe - Entry Point Not Found
The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
Thanks.*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there. -
When I turn on my computer an error message comes up that says Apple Sync Notifer.exe Entry point not found. The procedure entry point XMItextreadername could not be located in dynamic link library libxm12.dll
What should I do to fix this?When I turn on my computer an error message comes up that says Apple Sync Notifer.exe Entry point not found. The procedure entry point XMItextreadername could not be located in dynamic link library libxm12.dll
With that one, I'd try uninstalling your MobileMe control panel. -
Why is my itunes not installing properly?
I installed itunes day before yesterday, I spent hours last night linking all my music photograph and movie files, its a new windows 8 laptop.
I plugged in my 64GB ipad 3 rebooted it and reloaded all the information I wanted on it, took hours... finally completed this this morning. After this I restarted the laptop to configure my icloud link for the laptop (which I installed last night while I was loading files, I chose to restart later)
on completion I turned my laptop off for a few hours, when I turned it back on I went to itunes to connect my iphone to do the same and I got this message:
iTunes exe - Entry Point Not Found
The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not
be located in dynamiclink library F:\Programmes\iTunes.dll
OK
then after pressing 'OK' the following message:
iTunes
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I went back to apple website to reinstall iTunes, first reinstalled it same again, then unsinstalled it and the reinstalled it, same again.
The same thing happened with my old lap top and I replaced it with this new one at the start of the week.
Has anyone any idea what is going on and how to rectify this problem, I am now going on 3 weeks without iTunes.
Regards,
Damian36I started up and plugged in my iPad and then the following message came up:
iTunes
❗️This iPad cannot be used because the required software is not
Installed. Run the iTunes installer to remove iTunes, then install
the 64-bit version of iTunes.
OK
I then proceeded to the "iTunes64Setup" expanded folder to load "AppleMobileDeviceSupport64"
Started the install and then received this message:
Apple Mobile Device Support
❗️Service 'AppleMobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient
Privileges to start system services.
Abort. Retry. Ignore
I tried all tree options, last being ignore.
I continued to download the other 2 you suggested with out any drama.
I did a system restart and then opened iTunes.
Connected my iPad
Then message appears:
iTunes .exe - System Error
❌ The program can't start because CoreAdioToolbox.dll is missing from
Your computer. Try reinstalling the program to fix the problem.
OK
Press OK and then the next message:
iTunes
❌ iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
OK
Any suggestions? -
Updated to 10.5 on XP and now iTunes will NOT open - Entry Point Not Found - HELP!
Tried to update to iTunes 10.5 on Windows XP. Everything seemed to install properly and I restarted. However, when I try to open iTunes, it will not open and I get the following error message:
iTunes.exe - Entry Point Not Found
'The procedure entry point AVCFAssetClassWithByteStreamAndOptions coulf not be located in the dynamic link library AVFoundationCF.dll'
When I click 'OK' (which is the only option), it says:
'iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)'
I have updated iTunes on my machine in the past numerous times without ever having an issue. Now, I get this and cannot access iTunes at all. I have tried reinstalling 10.5 and restarting my machine about five times now...to no avail. I am hesitant to remove iTunes, since I have 6000 songs and do not want to lose my library. Is there anything I can do? Seems like it should be a simple fix.
When I called Apple, they told me to upgrade my OS to Vista. Huh? That seems like overkill to me. iTunes has always run fine on XP.
Please help!I found another site and it suggested that I go through System Preferences and check downloads again. The iTunes update was still there indicating that it still needed to be downloaded. So I downloaded it again and now it works fine. I hope this might help someone else.
Thank you -
I have a PC computer and an i-phone 4S. I set up an i-tunes acct online w/ icloud. After a recent update my PC started receiving an error message on start up. It says "AppleSyncNotifier.exe - Entry Point Not Found". It also says, " The procedure entry point smlTextreaderConstName could not be located in the dynamic link library libxml2.dll". I click on OK and it moves on. It doesn't seem to affect my computer, but it's annoying. Any ideas on correcting this?
UPDATE - (Made a second post so it'd be clearer)
I uninstalled Office 2003, then iTunes, then all of the associated software (Mobile Device Support, Apple Update, Quicktime, EVERYTHING)
Reinstalled Office 2003, then Office 2003's Service Pack 3, then all Microsoft Updates for Office 2003. Then I configured a blank Outlook profile, no data other than the IMAP info for my .Mac/Me account. Then I downloaded (didn't used my existing copy) of iTunes 7.7 and reinstalled. Sync'd phone. Changed MobileMe settings. Told it to sync contacts and calendar with Outlook. It warned me because it was the first sync. Told it to take ALL of the MobileMe data and replace the data on the computer (which was blank.) NOTHING showed up in Outlook. When I tell it to sync Contacts with the Windows Address Book, it works fine.
In Conclusion, it still won't sync with Outlook, when it's set to Sync with Outlook I still get the annoying MAPI errors. So I switched to to Sync the Contacts with the Windows Address Book, and I'm backing up my WAB file now with my nightly backups.
I suppose we'll see if it gets fixed when I format/reinstall on Vista Ultimate in the next month or two. If anyone has any suggestions, I'm open and willing to try them.
On a completely unproductive note: Despite my love for Exchange, I hate MAPI. -
Here's my problem, until yesterday my firefox browser is fine, unless sometimes when i playing games/app in facebook the plugin keep crashing but thats okay i can stop it and reload my firefox.
But now everytime i try to open firefox it displaying the error massage:
firefox.exe - entry point not found
The Procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library Kernel32.dll
I try to uninstall firefox, and reinstall again.
i have to use internet explorer and torch browser, which don't fit me and make me in pain.
i try to run in firefox safe mode, according to some suggestion here, but it wouldn't allow me to open Safe Mode (i even holding the Shift button when clicking on firefix icon)
Can you guys help me in here?
Iam using windows xp.
Thank you so much in advance, GBU all :)hi, do you have service pack 3 installed on your xp computer?
-
Flash CS5 wont open after working for years? Entry point Not Found
Hi Guys,
I am having a problem opening my Flash CS5 after it working fine since I installed it forever ago. I do not know what could have caused this, and my other cs5 programs are opening fine.
Dreamweaver and Fireworks didnt change all (these 3; along with Flash; are what I use most)
I also open photoshop and aftereffects from my master collection for testing and they opened fine also. I ran a scan using microsoft essentials and found nothing.
I tried run as administrator on flash and it said the same thing.
I am using windows 7 Ultimate N SP1 64 bit
Here is the alert in text.
flash.exe -Entry Point Not Found
The procedure entry point ?ButtonChanged@UI_ClearButtonTextEdit@controls@dvaui@@UAEXP
AVUI_ButtonChangedMessage@23@@Z could not be located in the
dynamic link library dvaui.dll
Please let me know what is going on here.
Thanks, I really appreciate the help.
RandyYou should be able to cherry pick Flash out to uninstall and reinstall it from the master suite installer if I remember correctly. There's nothing wrong with a fresh reinstall, especially after years. That's a long time to be bulletproof.
Otherwise I can't hand you a commercial DLL but I really don't think your problems will be fixed even if I did. I think it's just hardware doing what it's notorious for, eventually having a fault somewhere. A reinstall of Flash should be fast and will write to new sectors and fix the file.
Maybe you are looking for
-
In Facebook, stories that are to long for display in current window are followed by the 'see more' tab.When I click see more in Firefox It doesn't open the remainder of the story,However It does work when I use this feature in IE,Must be a Firefox is
-
Oil Paint filter not working properly
When I run it, it just turns the image a dark, almost black, grey. If I change the settings, it functions properly, but several actions I have that use it all fail and give me the dark grey. I'm using Photoshop CC 64bit.
-
Can I preload a record in a form, e.g. I select the record in a list and I get the selected record in the form with the Update/Delete button available. (I like the Pass Parameter between Portlets sample from this forum by Jerry Silver, for displaying
-
Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?
Does anyone know if Photoshop Elements 9 for the Mac is compatible with Mavericks?
-
My adobe dreamwaver did not support on my laptop for low resulation problem.
the adobe dreamwaver requerd 1280*800 pixel. but my laptop resulation is 1368*726 pixel. so after installesion process completed the adobe dreamwaver did not running. what can i do now? my adobe dreamwaver version is cs6.