Can't pair iphone 5 with Toyota Camry 2011

Hi, I am having trouble to pair the handsfree feature with my Toyota Camry 2011. I have no problem to pair the audio player but having trouble to pair with the phone. I can play the song through BT connecting my iphone 5, but i can't make phone calls with BT feature. Has anyone having the same issue?

I had this issue but it's now resolved.  You can't just pair AUDIO PLAYER or BLUETOOTH - you need to go to Bluetooth set up on the car (press AUX and then the set up button - first button on the bottom left).  It will be at Audio Player set up - NOW you need to scroll using the right hand tuner (round nob on the right side) - and it will give you the option of pairing your PHONE.  This will pair the phone, you can also have it pair phone and audio player.
I suggest removing the audio player pairing from your phone and car and starting fresh.  Worked for me after days of trying to just pair the Audio (not the phone).  Good Luck!

Similar Messages

  • HT201205 can't pair IPhone with SYNC in Ford

    Have tried numerous times to pair IPhone 5 to SYNC system in two Ford vehicles.   Help?

    This is a problem with the bluetooth and the macbook air.  I mentioned the reason behind my need to pair - as it is not to share music, internet, etc. which I understand may be an issue.  I cannot find how to get support from the app maker, which is apple from my understanding. This app, keynote, only controls the keynote app on my mac. I haven't had any problem pairing the iphone and keynote but I need to control my keynote using bluetooth, as I have no garuntee that I will always be in a place with wifi or be able to access the wifi.

  • Can't pair iphone with macbook (air)

    I haven't been able to pair my iphone 3GS with my macbook. I want to pair it via bluetooth to use an app that I purchased to control keynote.
    I have had this problem with a macbook and macbook air.  Two weeks ago my main computer was an older black macbook and my iphone would not pair with my macbook, I thought maybe because the macbook was just getting on; as my (bad) luck would have it I was foced to purchase a new computer, and purchased a macbook air and I am just finding that it still doesn't work.
    When I go to pair it, I can get to the point where I accept the pair but then when I click on pair from the iphone, it says my macbook is not supported.
    I have searched these forums and have not found an answer that works for me. Thanks in advance for any help that you can give.

    This is a problem with the bluetooth and the macbook air.  I mentioned the reason behind my need to pair - as it is not to share music, internet, etc. which I understand may be an issue.  I cannot find how to get support from the app maker, which is apple from my understanding. This app, keynote, only controls the keynote app on my mac. I haven't had any problem pairing the iphone and keynote but I need to control my keynote using bluetooth, as I have no garuntee that I will always be in a place with wifi or be able to access the wifi.

  • Can not pair iPhone with iPad via bluetooth

    Usually, I use my iPhone 5 to control Keynote in my iPad mini. After I updated iOS 8 my iPhone could not pair with iPad via Bluetooth anymore. I have been reset network and all setting but it still be the same. Now I updated iOS 8.1.1 to both device but Bluetooth can not find each other and pair them. How can I do?

    http://support.apple.com/kb/HT4517
    Bluetooth is not supported for file transfer
    You can pair to tether.
    You have to use USB

  • HT204387 Cannot pair iPhone 5 with Toyota Camry Bluetooth

    I cannot pair iPhone 5 with Toyota Camry Bluetooth. Never had a problem with android

    Two things that you need to verify first
    1. The first step in troubleshooting any accessory is to determine whether the accessory is compatible with the device. Contact your automotive manufacturer or the manufacturer of your aftermarket head unit to see if your iPhone, iPad, or iPod touch model is compatible.
    2. Verify that both your car kit and your iOS device are running the latest software versions. To verify that your car kit is up to date, please contact your automotive manufacturer or the manufacturer of your aftermarket head unit.
    Also follow the Link. hope this helps.
    http://support.apple.com/kb/TS3581
    Regards,
    Taz

  • Can't pair iPhone 3G 3.0 with Unibody Macbook

    I've updated my iPhone 3G to 3.0, but I can't pair it with any of my macs.
    I've tried:
    15" unibody Macbook Pro (last. gen, no SD slot)
    13" unibody Macbook
    24" iMac (latest gen.)
    It pairs fine with my XP laptop.
    When I pair it, it seems to work ok, I get the popup on the phone screen, "confirm you see XXXXX on the computer "Name"", I tap pair, and then nothing happens and on OSX, it says there was an error pairing.
    What's up?

    I had a similar problem with my iPhone and Macbook.
    What I did that did work was this:
    1) Make sure bluetooth is turned ON on your iPhone, but tethering off
    2) System Preferences
    3) Bluetooth
    4) + Sign to add device (Launches Bluetooth Setup Assistant)
    5) Click Continue
    6) Select Mobile Phone, Click Continue
    7) Click Continue to let it gather information
    8) It will show a passcode, and this should also appear on the iPhone
    9) Click allow/accept or whatever is says on the iPhone when promoted with the code
    10) It will appear like its waiting for something else, just click continue on the Bluetooth assistant and it should continue the rest of the process.
    11) It should then create that Bluetoon Pan network connection
    What was failing for me before was after clicking allow/accept on the iPhone I was waiting thinking it should automatically detect this on the Bluetooth Setup Assistant on the mac, at which point it would fail.

  • How can I pair iPhone 6  / 8.1 with Audi and Mercedes until 8.1 is fixed?

    How can I pair iPhone 6/8.1 with Audi and Mercedes

    Generally your put the vehicle into discovery mode, turn Bluetooth on for the phone and the two should discover each other. I don't know what you mean about getting 8.1 fixed, as it is working just fine for me in my vehicle. Try going into the phone and removing the car(s) from the phone list. Turn off Bluetooth. Go into Settings>General>Reset Network Settings. Do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple Logo and release. The phone will reboot. Go into the vehicle(s) and remove all reference to the phone from the vehicle list. Turn the car off, then back on. Put the vehicle's system into discovery/pairing mode. Turn Bluetooth on for the iPhone. The two should pair after following any additional instructions from the vehicle's user guide, such as entering a PIN code.

  • Can't pair iphone ios 8.1 with mac

    Am running Yosemite on my Mac and cannot get handoff to work. Tried to pair iphone with the mac and haven't been able to do it. Keep getting not connected on bluetooth.Am supposed to be able to get phone calls on Mac and make them using Contacts. No to both.

    Exact same problem on my end. 
    MBA 2012 Yosemite with an iPhone 5s 8.1
    Not only is the phone NOT pairing with my iMac, I can't seem to get handoff to work. When trying to pair in the system preferences, it shows that the phone is connected for a split-second, then I get the "Network Unavailable" message also.

  • Can't pair iPhone5 with iPad2 and Cookoo watch via bluetooth

    Hi All!
    I can't pair iPhone5 with Cookoo watch via bluetooth.
    Bluetooth is on. But iPhone5 can't discover any device.
    I turned on bluetooth on my old iPad2 - the same story.
    They are searching, but see nothing.
    May be somebody have experience?

    OK! I've found the disision!
    1. Press and hold the CONNECT button on your watch for 6 seconds to place it in pairing mode.
    2. Open the COOKOO App on your phone.
       If you haven’t already downloaded the COOKOO app, you can find it on the App Store (for iPhone/iPad)
    The COOKOO app will automatically search for nearby COOKOO devices and automatically connect with the closest device.
    3. When prompted, select the option to “Pair” with your COOKOO watch.
    Once the pairing is complete, the COOKOO icon will remain solid to indicate that your watch is connected.
    Good luck!

  • Can I sync iPhone with movies on another Mac?

    My main computer is a PB but I do not have enough space to store movies on this machine. iTunes on this machine has all my music but my movies are on another Mac (G5) on my network. Is it possible to get iTunes on my PB to see movies on my G5 so that I can sync my iPhone with movies on that machine?
    Thanks
    Tony

    Your iPhone and itunes on one machine have a unique connection. Device information is kept on your computer and will recognise that phone. To connect the phone to another machine will create a new unique connection between the two, and everything you sync will mirror that machine. You can try syncing with one machine, all your music and stuff but not movies and on the other machine uncheck all selections for syncing other than movies. So to summarise. Machine 1, sync all things except movies. and on machine 2 sync nothing but movies, leaving everything else unsynced. It may not work, but it's worth a try, it won't mess anything up.

  • Can I sync iphone with another computer

    Can I sync iphone with another computer?

    If you do, you will lose all of your information on the phone. You can only sync to 1 itunes library at a time on 1 computer.

  • How come iMac can see Pmy iPhone with iPhoto but cannot syncronize with iTunes? Maybe need an update version? As a matter of fact iTunes version on iMac is a 10.4 and in iPhone I How come iget a 10.6: the iMac is brand new sunce I used a pc before. Thanks

    How come iMac can see my iPhone with iPhoto but cannot syncronize it with iTunes? Maybe need an update version? As a matter of fact iTunes version on iMac is a 10.4 and in iPhone I get a 10.6: the iMac is brand new since I just come from a pc. Thanks

    Hi ...
    see Pmy iPhone with iPhoto but cannot recognnized with iTunes?
    Try this support article > iOS: Device not recognized in iTunes for Mac OS X

  • How can I sync iPhone with iPad

    How can I sync iPhone with iPad

    Huh?  What are you trying to do?  Be more specific.

  • Can I use iPhone with Partner Coverage?

    The area where I am located has Partner coverage for AT&T. Is it possible I can use the iPhone with Partner converage?
    iMac   Mac OS X (10.4.10)   17-inch iMac Intel Core 2 Duo

    Very doubtful - no is more like it.
    If you roam on an AT&T Wireless affiliate or partner coverage more than 50% of the time on a regular basis - AT&T Wireless will cancel your contract and they won't allow you to become a subscriber in the first place unless you reside in an area that is covered by AT&T's own network.
    You should confirm this with AT&T Wireless.

  • Hello, I live in the Netherlands and my friend is going to bring me a MAC and an Iphone. I was just wondering is there international warranty? Other question is that can I use Iphone with any simcard that I want? Thanks in advance!

    Hello, I live in the Netherlands and my friend is going to bring me a MAC and an Iphone. I was just wondering is there international warranty? Other question is that can I use Iphone with any simcard that I want? Thanks in advance!

    There is an international warranty on the Mac, but not on the iPhone...iPhone warranties are tied to the country of purchase.  Iphone 5s are currently only available in the US tied to a carrier, you cannot use another nano-sim card in them.

Maybe you are looking for

  • Is 10.4.7 required for 10.4.8?

    After I started to download the latest OS update, I noticed on the download page that v. 10.4.7 was listed as a requirement for the update. Since my current OS is 10.4.6 does that mean the update won't work (until I first download 10.4.7)?

  • JavaFX project as library under Netbeans

    Hi, I have a big JavaFX project and I would like to improve modularity. In this case, I would like to set a JavaFX module project under Netbeans as library but I don't know how... Isn't there a checkbox "Library" as in the Eclipse project settings to

  • Using sap.wdarfc.useSys to override JCO designation

    Am trying to use the Logical Systems Mapping to allow a Java Web Dynpro application to switch the back-end SAP system to call as described by SAP here: http://help.sap.com/saphelp_nw04/helpdata/en/af/84a34098022a54e10000000a1550b0/content.htm So I ha

  • Programatically Adding Items

    In 9.0.2, I need a simple interface to allow the users to add specific items into portal. Currently, they need to do edit - add item - choose item type - enter item attributes. This takes too much time. Is there an API or portlet to do this?

  • My iphone4 connecto itune but not sapport simcard, my iphone4 connecto itune but not sapport simcard

    my iphoe4 is conect to itune for start but my sim card is not working