Can't post multiple values using forms based on procedure

I want to post multiple values from form based on procedure. Is it possible?
I've tried following steps:
- create LOV with Multiple Values format
- create form based on procedure
- in Formatting and Validation page choose required item
- select item type - combobox, enter input height = 5
- select my LOV for item
after creating form I get listbox, but selecting multiple values (with Ctrl or Shift key) not working...
what's wrong.
I'm use portal 9.0.2.2.22

Hi,
It is not possbile right now with Portal Forms to submit multiple values to a field.
Thanks,
Sharmila

Similar Messages

Pass Value by Form Based on Procedure in Target Frame

I made a form based on procedure and trying to pass all variables to a target frame called "dest2". I got the sample code on this forum and used window.location, but then I figured it can't pass values to another frame. I tried window.open, but can't seem to figure out how to code it.
Basically on the page, it has the portal form using stored procedure, and a IFRAME named "dest2".
The detail my stored procedure is:
====================
Create or Replace Procedure WM.TEST
p_from_date IN VARCHAR2,
p_to_date IN VARCHAR2,
p_desformat IN VARCHAR2,
as
begin
htp.p('<script>');
htp.p('window.location="http://domain/portal/page?_pageid=1063,801014&_dad=portal&_schema=PORTAL&p_from_date='||p_from_date||'&p_to_date='||p_to_date||'&p_p_desformat='||p_desformat||'"');
htp.p('</script>');
end;
===============
Does anybody know how to modify this procedure to pass value to target frame = "dest2" ?
Thanks,
Sal

Hi,
For documentation purpose, you can read Oracle9iAS Portal Bible -
they have a complete chapter on creating forms based on stored
procedure.
Hope this helps.
Regards,
Jatinder

How can I return multiple values using Oracle 9i Web Services ?

Hi, Is it possible to return multiple parameters using WebServices in general ? And if yes, how do we do it using Oracle 9i WebServices ?
At my client usually I call
return_value = SoapClient.MehtodName(param1, param2, param3)
If i need more than one return_value...how do we handle that ?
Thanks,
-Krishna

Anyone has any ideas about this ?
And also if i want a collection in one of the input parameters...how to do that ?
Does Oracle WS have any such support ? Or we have devise our own way like sending it by separators or something like that ?
Thanks,
Krishna

How can I get multiple values from form as a list ?

we designed a form , and there are some attributes designed as checkbox , the data in the form is like following :
    <xml ......>
            <party>11</party>
            <party>22</party>
            <party>33</party>
    </xml>
Is there any easy way to get the parties' data from the xml into a list predefined as a process varible ?
Any help is appreciated !

You woudl use a setValue service and use xPath expressions to extract the individual party nodes from the inbound XML and then populate the list with these values.
Paul

How can I return multiple values with PL/SQL Web Services

Hi,
I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
Reginald
ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
{color:#ff0000}
create or replace TYPE person AS OBJECT
( id_interv number,
first_name VARCHAR2(50),
last_name VARCHAR2(50),
date_birth date
);{color}
Then your function used in your Web Service should look something like this :
{color:#ff0000}
function info_emp (p_empno IN VARCHAR2) RETURN person AS
l_emp person := person(-1,'','','');
BEGIN
SELECT first_name
,last_name
,emp_no
INTO l_emp.first_name
,l_emp.last_name
,l_emp.emp_no
FROM emp
WHERE upper(emp_no) = upper (emp_no);
{color}
{color:#ff0000}
RETURN l_emp;
EXCEPTION WHEN NO_DATA_FOUND THEN
l_emp := person (-1,'n/a','n/a','n/a');
RETURN l_emp ;
END info_emp;{color}
{color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
<first_name xsi:type="xsd:string">John</first_name>
<last_name xsi:type="xsd:string">Doe</last_name>
<emp_no xsi:type="xsd:string">0250193</emp_no>

How to get multiple values using HttpSession.getAttribute(java.lang.String)

Hey Guys
I'm trying to find a way to get multiple values using the following method
HttpSession.getAttribute(java.lang.String)
Here's the scenerio. Its a already written application and now i'm trying to make some changes. earlier in the jsp page a combo box was used and value was retrieved in the servlet using the getAttribute method of Session. Now I'm using a html multiple selection list and have to retrieve all the values selected in the list in the servlet. Can anyone please suggest me how to do that. HTTPRequest class has a method getParameterValues which will let me do that but i have to do is using HTTPSession.
Thanks for your time to read this

I'm not sure what you are trying to do. You can only use session.getAttribute to retrieve something that has already been stored in the session with a previous setAttribute. If you need to store multiple values under one attribute name using setAttribute, you can store an array, or an ArrayList or whatever type of Collection you want. The request.getParameterValues method is the only way you can retrieve form parameters than can have multiple values. If the servlet hasn't already processed these parameters and put them into the session for you, you have to use request.getParameterValues.

TS5223 can I have multiple users use one apple account?

can I have multiple users use one apple account?

I interpreted his post to mean that he meant multiple human users, not multiple devices. Hopefully, he'll clarify.

When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work

When I click "share" icon for Facebook, ensuing popup windw unstable. pops up then gone, cyclically,won't stop until I close originating tab/website.pop up blocker off & in safe mode. can't post FB unless use Safari. Mac OS 10.6.8. Tried to post pic wouldn't work

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

Any one else have problems using 'FORM' based authentication in OC4J?

Since I couldn't find any information on this from Oracle I went with the specifications from Orion.
I am using Oracle Internet Directory Server for authentication of OC4J apps. I followed Orions specs for writing and pluging in your own usermanger to make calls to OID. Everything works fine when I use BASIC authentication but when I use FORM based authentication it fails to send the browser to the original url that was requested.
The browser just displays a blank screen?
You can tell that the client is authenticated because you can just request the URL again and it's displayed without prompting for a username/password.
For the login in screen the only specs Orion gives is that your form has to have an action of 'j_security_check' and pass 'j_username' and 'j_password'.
Does oracle have another way to do this, or has anyone else experienced this and no a way to fix it?

Tom,
Custom user authentication in Oc4J 1.0.2.2 is same in both Oc4J and Orion and we have tested that form based authentication works
fine. In 9iAS Release 2 Oracle has an integerated JAAS implementation with OC4J which you can configure either to authenticate users from a encrypted file or users stored in OID.

How can I change the value used in a Criteria Rule in a Subscription agent

Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04).
I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG. I need to filter on a different VKORG value in the quality environment, but when I change the value of the sales org, the change is not saved. I have tried this even non 'activated' subscription agents, but it still does not appear possible to change and save the changes.
This poses a big problem because the VKORG value I want to use does not even exist in the dev environment, so I could not even rebuild in dev and transport the new agent to quality. Can anyone help me?

Too old to care now.

Multiple Values using if-- inlist

Hi,
How to pass multiple values using inlist and if
=if([Plant] InList("2010";"2012";"2014";"2016";"2018") ; xyz") ElseIf([Plant] InList("2020";"2022";"2024";"2026";"2028"); "pqr") ElseIf
([Plant] InList("2030";"2032";"2034");"abc") else ([dgh])
i am getting error in this please correct it
Thanks & Regards,
Vinay

Use "Then " to resolve above error.
For example :
=If([Year]InList("2001";"2002";"2003")) Then "Y" ElseIf ([Year]InList("2005";"2006";"2007")) Then "yy" Else ([Year])
Regards,
Pranay

With out inbound Idoc can we post the data using we19

Hi,
with out inbound idoc can we post the data using we 19.........
for testing any idoc type particular to inbound FM is posting application data..in TABLES.....
Regards,
Raghunadh.

HI Raghunadh Babu
The main purpose of given WE19 Transaction by SAP... To generate test IDoc and check whether the data is posting according to business requirement....
Answer for your question.....Yes U can generate IDoc...
Enjoy playing with we19...
RR

How can i select multiple values form select list

Hi ,
I have created few items in a page and all items are Lov items and based on these items stacked charts will display. My requirement is I need to select multiple values form LOV's
Eg: In Interactive report goto filter and select an item and expression as IN and select multiple items and i need to select multiple values like this.
Please anybody help me how to get multiple values.
I have one more doubt Can we have a Print preview option in APEX.
I have to see print preview for stacked charts. is it possible?
Regards
Narender B

HI ,
Thank you for valuable information and looks good.but Here our client need to select multiple values.... for eg: Open IR report and click on Actions button --->select filter
select any column , operator as IN and from expression select multiple items.
I need to select multiple values in that way so, could you please guide me how can i achieve this.
Regards
Narender B

Forcing specific clients or groups to use forms based authentication (FBA) instead of windows based authentication (WIA) with ADFS

Hi,
We are have a quite specific issue. The problem is most likely by design in ADFS 3.0 (running on Windows Server 2012 R2) and we are trying to find a "work-around".
Most users in the organization is using their own personal computer and everything is fine and working as expected, single sign-on (WIA) internally to Office 365 and forms based (FBA) externally (using Citrix NetScaler as reverse proxy and load
balancing with the correct rewrites to add client-ip, proxy header and URL-transformation).
The problem occurs for a few (50-100) users where they are sharing the same computer, automatically logged on to the computer using a generic AD-user (same for all of them). This AD-user they are logged on with does not have any access to Office365
and if they try to access SharePoint Online they receive an error that they can't login (from SharePoint Online, not ADFS).
We can't change this, they need to have this generic account logged on to these computers. The issue occurs when a user that has access to SharePoint Online tries to access it when logged on with a generic account.
They are not able to "switch" from the generic account in ADFS / SharePoint Online to their personal account.
The only way I've found that may work is removing IE as a WIA-capable agent and deploy a User-Agent version string specific to most users but not the generic account.
My question to you: Is there another way? Maybe when ADFS sees the generic user, it forces forms based authentication or something like that?
Best regards,
Simon

I'd go with your original workaround using the user-agent and publishing a GPO for your normal users that elects to use a user-agent string associated with Integrated Windows Auth.. for the generic accounts, I'd look at using a loopback policy that overwrites
that user agent setting, so that forms logon is preferred for that subset of users. I don't think the Netscaler here is useful in this capacity as it's a front-end proxy and you need to evaluate the AuthZ rules on the AD FS server after the request has been
proxied. The error pages in Windows Server 2012 R2 are canned as the previous poster mentioned and difficult to customize (Javascript only)...
http://blog.auth360.net

Unable to populate the default value using form personalization

Hi, I need to default a value in order managemnt for waybill number
shipping -- transaction - delivery - detail --
In Order management
Shipping - Transactions
Source system -- Order management
From Order number - Any ordernumber
say find
I want to default this Detail ( xxxxx) as Way bill
value of :DLVB.DETAIL_LABEL
I have put the following condition on form personalization
Condition tab
Triger event
When new record instance
Trigger object
dlvy_s
Processing mode both
Actions tab
Property
Object type Item
Target Object DLVY_S.WAYBILL
Property name Value
Value
:DLVB.DETAIL_LABEL
but it is not defaulting... Appreciate if any one has idea what is wrong in this.
Edited by: 885022 on Oct 3, 2011 11:31 AM
Edited by: 885022 on Oct 3, 2011 11:33 AM

yes Srini
as we dont have any option via personalization to set the default values ,it can be done through controller extension ,
in processRequest method of extended controllere get the control for that particular field where u want to set the default value and set the value using fieldbean.setValue(pagecontext,value);
in case of any particular case ,please post in the forum
thanx
Pratap

Can't post multiple values using forms based on procedure

Similar Messages

Maybe you are looking for