Can't rasterize in an action for a batch

I have a number of files (AI) that were put into an Indesign document for PDF print. These same PDF's were later used in a CD format of the book. However, the AI images are either coming up slowly, bad re-draw, or are causing the program to crash. Changing all images to PSD would work other than the fact that all of the images have to be hand-placed again in the InDesign documents as the link does not remember the same placement-the images come in way out of place. The thought was to retain the AI format but rasterize in AI so as to loose layers/points,paths and cure the bad re-draw in the CD format of the book. The problem is I can't seem to be able to run a batch that recognizes"rasterize" in the action. I am using CS2. Any thoughts? DO I need a script?If so, any suggestions for someone who knows very little about scripting? Any alternatives?

As for setting up the action, I created a new set, started a new action in the set by opening up a file out of th home folder of vector images, then rasterized under Object (300 resolution, transparent background, art optimized), then "saved as" in a separate folder, then closed the file and stopped the action.
As for the batch, I have overide open and overide save commands checked. I have chosen the correct set and action, the correct source and destination folders. I am using CS2. It just pops up a window that says that rasterizing is unavailable.

Similar Messages

Can we create a dynamic action for Training and Event Management???

Hi All
i need to configure automatic email generation for an employee when he gets booked for a training program in the training and event management module. can we use a dynamic action for it? and how to configure it?? I also guess that i have to use the Feature MAILS for it. but i am not sure abt it and also not sure how to configure it. I will really appreciate if someone can provide me with a step to step configuration for the same. Its urgently sought.
Thanks and Regards

Notifications in T&E are done through Workflow.Dynamic Actions are only for PA Infotypes.
~Suresh

How can I edit an Automator action for Word?

I'm running Word 2008 on a Macbook Pro, Mac OS 10.5.
Word comes with a selection of Automator actions, including one to find and replace text in Word. I often want to convert standard numerals to old-style numerals, which are part of the extended glyphs set in fonts I use. Automator will allow me to set up ten find/replace actions (for the numbers 0-9) that successfully replace all the numerals with old-style numerals. But it only does it for the main body of the document, not for the footnotes. I need to be able to do it for all the footnotes.
I thought I might find a workaround by adding an AppleScript to my workflow, which would shift the focus in Word to the footnotes and rerun the find/replace actions. I mapped the menu item View/Footnotes to the keystroke command-) and inserted this AppleScript into the Automator workflow:
tell application "Microsoft Word"
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
keystroke ")" using command down
end tell
end tell
end tell
But the find/replace actions simply repeat what they'd done before, converting the numerals in the main body but not in the footnotes. I then thought that perhaps I should have an AppleScript to do the find/replace itself, once the footnotes have been selected, so I created the following (command-H accesses the find/replace dialog box in Word 2008):
tell application "Microsoft Word"
tell application "Microsoft Word" to activate
tell application "System Events"
tell process "Microsoft Word"
keystroke "H" using command down
keystroke "1"
keystroke tab
keystroke ""
end tell
end tell
end tell
The character after the fourth keystroke command is the glyph for old-style numeral 1. For some reason Word reinterprets this as the letter a. So using AppleScript I can only replace the numerals 1-9 with the letters a-i.
I'm pretty hopeless at even this very basic level of programming, but I presume that there's something in the Automator action 'Find and replace in Word' that specifically tells it not to look anywhere but the footnotes. I also presume it's possible to insert a command to tell it to operate on the footnotes (and headers and footers: everywhere!) too.
Does anyone know a way to edit an Automator action? I'm willing to experiment and fiddle with one until I find a way that works, if nobody knows the exact changes that I'd need to make, but I just don't know how to edit an Automator action in the first place. A bit of googling suggests that I could do it in XCode, and that that is bundled with my Mac, but I don't have it.
This all used to work when Office used to allow VBA (and I was using a horrible Windoze machine). Maybe someone would prefer just to find a way of creating a solution our of the old code, so here's one part of what I used (to change the number 1):
For Each aStory In ActiveDocument.StoryRanges
With aStory.Find
.ClearFormatting
With .Replacement
.ClearFormatting
End With
.Execute FindText:="1", ReplaceWith:=ChrW(63281), _
Format:=True, MatchCase:=True, Replace:=wdReplaceAll
End With
Next aStory
Thanks in advance for any help.

Thanks to all three contributors for their generous help so far. Mac people are lovely.
BDAqua's suggestion wouldn't work, I think, because copying footnote text into another application and then back into Word would lose all the associations between footnote references in the body and the footnotes themselves. I wish I could do what Klaus1 says, but Word 2008 won't allow the creation of Macros any more. They've shut off support for their creation. Nice MS. red_menace's suggestion seems very plausible and I'll look into a way of mapping the old style numerals to specific keystrokes. That might do it.
Reflecting on what you all said, I looked again through Word's help menus and eventually got pointed towards this page of 'help': <http://tinyurl.com/6398l6>. This is completely impenetrable for me, though it does compare a VBA script for Word 2004 to an AppleScript. This encourages me to hope that it should be possible to translate my original VBA script (part of which I included in my first message) into AppleScript, though I don't know how to do it because I don't really understand the language in the first place (the VBA script was put together by someone else).

How can I make the default action for Real Player (etc.) to be not to play?

While browsing with Mozilla, I would prefer not to have videos play unless I start the video. This goes for commercials or any video.
Is there a preference to set this? If not, can you make one that does that?

By default plugins.click_to_play should be default set to true. However, please also contact Apple support to make sure that this is expected.
If there is not an option to override this, it is also possible to set the preference in about:plugins:
*[https://support.mozilla.org/en-US/kb/why-do-i-have-click-activate-plugins Why do I have to click to activate plugins? ]

Can Someone Confirm this Nano Action for me?

I need to have an AIFF recording UNCOMPRESSED on my Nano.
If I bring into iTunes as AIFF, will the Nano compress it when I download to the Nano?
If so, can I use the Nano as a hard-drive and copy the AIFF file to it that way?
Any help greatly appreciated.
Thanks

Yes, it will download uncompressed. It will take a lot more space but it will still sync to the nano as uncompressed. Syncing to your iPod will not compress your files unless you change the format yourself. The same format you imported the file to iTunes will be the same format sent to your nano.

Hello I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair. Following my issue relating to a

Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution International

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

How I can make actions for write the file name in front image

Hello All
How I can make actions for write image(file) name in front the image automatically in photoshop cs3.
Thanks

This script tutorial might be helpful:
http://av.adobe.com/russellbrown/CaptionMaker_SM.mov

I forget my anthor email for apple store what can i do ? You action is highly appreciated

I forget my anthor email for apple store i have password but the email no what can i do ? You action is highly appreciated .

http://support.apple.com/kb/HT5625?viewlocale=en_US

Can we do deadline monitoring using actions for leads?

Hi Experts,
I have a requirement to trigger mails from the lead based on the lead end date.If the lead end date is 3 months or 2 months or 1 month from now,i have to send a mail to concerned person saying that,lead will get expired in 3 or 2 or 1 month.
Is there any standard workflow for this?
can we do it using actions?
Thanks,
Adi.

Hi adi,
This can be achived using date profile in action defination-condition follow below steps:
1) If you want to send the mail to concerned person on 10 days before lead end date then
2) Create date rule e.g. Lead end date= Start date+30days then u r new rule should be Start date + 20 days accordingly u have to make changes in code.
3) u can use this new date rule in a action condition (Currnet date=new rule date)
Hope it'll help u, let me know u want more help.
Regards,
Dipesh.

Image Sequences and Batch Processing: Can opening files from different folders as image sequences be set up as an action for batch processing?

I have an ongoing series of tasks that necessitates opening the contents of a series of folders as image sequences.
I'm used to setting up some fairly complex actions, including ones that are intended to be applied to all of the contents of materials in various subfolders, but for some reason I cannot get an Open-with-Image-Sequence-Checked action to set up in a way that will batch process correctly.
Complicating matters is that the file prefixes (i.e., the letters before the sequential numbers) and the folders will always have different names from the last time the process had to be carried out.
The steps I would like the action to carry out would be the following:
1. Open Subfolder 1 - that is, Photoshop shouldn't be looking for a specific folder. It's just *any* subfolder to the current parent folder.
2. Select first file in sequenced set of files.
3. Open as an image sequence.
4. Open Subfolder 2.
5. Select first file in sequenced set of files.
6. Open as an image sequence.
...rinse and repeat until Photoshop runs out of subfolders to check.
Am I asking the impossible?
Thanks!

I'll look around there, because I had posted something about this and was told to look here ps-scripts - Browse /Image Processor Pro/v3_0 at SourceForge.net
then this is the image here:
is the result I received. Granted I'm new to using scripts and actions for image processing large amounts of files.

Slave instance can not synchronized with the master for a long time

Hi,
Slave instance can not synchronized with the master for a long time, and the gap of LSNs between slave and master are more and more larger. The transfer bytes per second between master and slave is 118MB/s , upper limit to the ethernet card. Why???
ENVIRONMENT:
1. A network program which we called mcdb is based on BDB 4.8.30. It is used to accept get/set requests and then query data from bdb or save data to bdb.
2. mcdb implements replication with bdb replication manager api. The default start replication policy is DB_REP_ELECTION, rep ack policy is DB_REPMGR_ACKS_ONE_PEER and rep priority is 100.
3. The bdb data files, bdb log files, region files and rep files are all in the same home directory.
4. There are two instances of the mcdb are separately on two standalone servers which has no other programs. These two instances are in one replication group which can elect a master automatically.
5. The master instance is online, which has lots of requests (get, set, delete).
ACTIONS:
1. Start two mcdb instances on two servers and the two instance make a replication group. Slave has already synchronized with the master.
2. Stop the slave for a long time (more than 20 hours).
3. Start the slave instance to synchronize data with master.
RESULT:
1. the gap of LSNs between slave and master are more and more larger.
2. db_stat of master and slave:
master db_stat:
467170     Number of PERM messages not acknowledged
9245     Number of messages queued due to network delay
172415     Number of messages discarded due to queue length
25880     Number of existing connections dropped
3407     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.146 (eid: 0, port: 30011)
Environment configured as a replication master
331726/3574994     Next LSN to be used
0/0     Not waiting for any missed log records
328872/466092     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
2323     Number of duplicate log records received
0     Number of log records currently queued
6768     Maximum number of log records ever queued at once
55284     Total number of log records queued
120M     Number of log records received and appended to the log (120475988)
111     Number of log records missed and requested
2147M     Current master ID (2147483647)
2     Number of times the master has changed
0     Number of messages received with a bad generation number
8505306     Number of messages received and processed
12     Number of messages ignored due to pending recovery
471869     Number of failed message sends
12M     Number of messages sent (12959945)
0     Number of new site messages received
1     Number of environments believed to be in the replication group
990543     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup complete
6244678     Number of transactions applied
0     Number of startsync messages delayed
1     Number of elections held
1     Number of elections won
No election in progress
0.057097     Duration of last election (seconds)
8944103     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
5273M     Number of records added to a bulk buffer (5273592170)
10M     Number of bulk buffers sent (10490865)
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
slave db_stat:
0     Number of PERM messages not acknowledged
0     Number of messages queued due to network delay
0     Number of messages discarded due to queue length
1454     Number of existing connections dropped
0     Number of failed new connection attempts
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
DB_REPMGR site information:
10.67.15.147 (eid: 0, port: 30011)
Environment configured as a replication client
329544/2916048     Next LSN expected
330433/2013808     LSN of first log record we have after missed log records
329543/5500501     Maximum permanent LSN
0     Next page number expected
0     Not waiting for any missed pages
0     Number of duplicate master conditions originally detected at this site
2147M     Current environment ID (2147483647)
100     Current environment priority
49     Current generation number
50     Election generation number for the current or next election
5256M     Number of duplicate log records received (5256599432)
3925284     Number of log records currently queued
3925285     Maximum number of log records ever queued at once
4880561     Total number of log records queued
3578038     Number of log records received and appended to the log
1912297     Number of log records missed and requested
0     Current master ID
1     Number of times the master has changed
0     Number of messages received with a bad generation number
12M     Number of messages received and processed (12980442)
2     Number of messages ignored due to pending recovery
0     Number of failed message sends
1912307     Number of messages sent
0     Number of new site messages received
0     Number of environments believed to be in the replication group
0     Transmission limited
0     Number of outdated conditions detected
0     Number of duplicate page records received
0     Number of page records received and added to databases
0     Number of page records missed and requested
Startup incomplete
110568     Number of transactions applied
80     Number of startsync messages delayed
0     Number of elections held
0     Number of elections won
No election in progress
0     Number of bulk buffer sends triggered by full buffer
0     Number of single records exceeding bulk buffer size
0     Number of records added to a bulk buffer
0     Number of bulk buffers sent
0     Number of re-request messages received
0     Number of request messages this client failed to process
0     Number of request messages received by this client
Edited by: 899585 on 2013-1-4 下午10:54
Edited by: 899585 on 2013-1-4 下午10:55

Hi,
Unfortunately, this issue is beyond the level of what is supported over the forum. Performance related issues are extremely complex and require an in-depth understanding of your environment and dedicated support. In a generic sense, you can look at this as a basic queueing problem. You have a server that went down and work is still coming in. When the server gets started it is possible that it may never catch up depending on new work coming in and the rate at processing the old work.
So what would you do in this case --- one thing would be to reduce the new work coming in. In HA terms this would be slowing the master down and you can increase DB_REP_ACK_TIMEOUT for this. Another thing you could do is add fresh servers to help reduce the workload. In HA terms, this would be the equivalent of restarting the client and give it a fresh look at everything. Another thing you could do is replan the system and load balance. In HA terms, it would mean something like take a hot backup of the master and reinit a client from scratch.
If you are interested in getting a dedicated support person working on this concern, please let me know and we can move forward down that path. Just respond to the thread with your email address and I will get in contact with you so we can pursue that approach.
thanks
mike

How to use same actions for differ pop-up buttons

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
<b>Points will be sured.</b>
Sanket sethi

Hi ,
u can use the method SUBSCRIBE_TO_BUTTON_EVENT of the IF_WD_WINDOW interface ... to handle the event fired by the popup .....used this method after creating the popup window ...
regards
Yash

Is there a way to save a job action for YouTube upload in Compressor 3.5?

Is there a way to save a job action for YouTube upload? I have about 25 - ten minute clips I want to upload and they all pretty much have the same description and tags. Is there a way to save/make a preset of the job actions that way I don't have to keep inputing the same usernames, passwords, descriptions, tags? Thank you

the method mentioned by benwiggy will certainly work. If you want to an option that would give you more options, you could use a PDF Service. You could then put a specific job on hold while still allowing others to use the printer.
You can do this by opening AppleScript Editor (/Applications/Utilities). You can copy and paste the following into an editor window --
on open printJobs
tell application "Finder"
set trapFile to quoted form of POSIX path of (printJobs as string)
end tell
set defaultPrinter to do shell script "lpstat -d | awk -F: '{print $2}'"
do shell script "lpr -P" & defaultPrinter & " -q " & trapFile
end open
Save the file as an Application. You can name it something like Hold Print Job. Then just put it in the PDF Services directory in the Library directory of your Home folder <yourname>/Library/PDF Services. You may need to make the PDF Services directory as it may not already be there.
Once the file is in place, you can use it by using the PDF drop down menu at the bottom left of a print window. That will send the file to the printer and put it on hold. Others can still use the printer. You can then print your file whenever you want. Just open the print queue as mentioned by benwiggy. Highlight the job that is Paused. You will see a little curly icon at the very right (looks like a reload icon in a web browser). Just click that icon and the job will start printing.

Unable to add Action for table - throwing Fatal error while rendering the table after adding

Hi,
I am not able to add action to the table i created.
when i click on events and then Create Action for "onFilter" event, it is giving me Internal Error. The message details is:
eclipse.buildId=@qualifier@
java.version=1.6.0_45
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en
Command-line arguments: -os win32 -ws win32 -arch x86 -data C:\NWDS\Workspace
Error
Thu Jul 17 11:17:27 IST 2014
Internal Error
   Plug-In Name: Web Dynpro HTML Rendering
   Internal Error : com.sap.ide.webdynpro.rendering.html
   Class      : com.sap.ide.webdynpro.viewdesigner.ur.RenderingService
   Method     : renderDelta
   Message    : java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
   Exception : java.lang.RuntimeException: java.lang.RuntimeException: nullFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSSapTableRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.TableAdapter@1376233Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@1102ae6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSGroupRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.GroupAdapter@70815bFatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@3cb708Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@14a4b5Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSFlowLayoutRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FlowLayoutAdapter@14983d6Fatal rendering error at control com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter [] and renderer com.sap.tc.ls.renderer.ie6.LSScrollContainerRenderer. Please contact the developer of the renderer. com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.ScrollContainerAdapter@16e8151
      [Error: com.sap.ide.tools.services.ui.dialog.DialogService Thread[main,6,main]]
The complete error details is also attached with the message.
After creating the action, the table looks like below:
Can someone help me on fixing this issue.
Thanks,
Abhishek.

Its a rendering issue with the NWDS/IDE.
Try, close and re-open for fix it. If it still persists, uninstall NWDS and re-install the right version of NWDS w.r.t the Portal server.
Regards,
Sharath

Error in BPM: "no interface action for sender or receiver found"

hello,
i configured a interface scenario SOAP - PI - Idoc using a BPM sync/async bridge.
i followed the document
when i try to call interface with my soap client i have the follow error in SXMB_MONI:
Timeout condition of pipeline reached
if i check the detail in trace i can found the follow message:
<Trace level="1" type="T">select interface SI_MATREQ_ABS</Trace>
<Trace level="1" type="T">select interface namespace http://pmf/orders</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
in BPM monitor i cannot see any interesting logs for determine the problem.
I clear cache many time and reimported Integration Process more time.
Have u some suggestion?
thanks in advance

Hi,
Check whether this thread help you or not....
SXMB_MONI: no interface action for sender or receiver found
Regds,
Pinangshuk.

Can't rasterize in an action for a batch

Similar Messages

Maybe you are looking for