Can't see member variables when debugging with jrockit

Hi all,
I'm using WLS 8.1.4 with jrockit and trying to do remote debugging while connecting from IntelliJ Idea 4.5.4. Everything works fine except that I can't see a class's member (or instance) variables in the debugger. I can see static and local variables, step through the code, etc. If I switch to Sun's jvm that came with WLS (1.4.2 05) I can see member variables. Is there a setting to change this or is it a known issue? I'm using -Xdebug -Xrunjdwp:transport=dt_socket,server=y,address=5005,suspend=n as my startup args.
thanks

I just check with IntelliJ support on this issue. They say that its a known issue with IntelliJ 4.5. According the them a fix has been implemented and debugging of member variables is possible in IDEA 5.x versions.

Similar Messages

Can't see 'Local Variables' while debugging in Sun Studio 11

I am debugging a C/C++ application built with Sun Studio 11 running on Solaris 10. I load the application as always, set a breakpoint and run. The debugger stops at the assigned breakpoint as expected.
The issue is that at this point there are no local variables displayed in the local variables pane.
I have tried restarting SS11, rebuilding, etc...
This is the first time I have seen this happen.
Does anyone else have an idea what is wrong?

Does adding a particular variable to Watch view help? (it can be done by typing "display <variable>" in dbx command line).
You can also try erasing (or better moving to a temporary location) all Sun Studio settings like this:
mv -f ~/.sunstudio /tmpand start debugging session again.

I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB. How can I get my computer to recognize my ipod

I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB. How can I get my computer to recognize my ipod

iPod not recognized in 'My Computer' and in iTunes for Windows

Can't see Macintosh HD when trying to reinstall

In short: Trying to reinstall Yosemite after erasing disk, can't see Macintosh HD when asked to select install disk, can I lay see recovery (which is locked). Can see disk under disk utility but no Erase tab visible, only First Aid and Partition tabs. In long: I've just today got my MBA 15", and I spent the day setting up things, including activating FileVault. I encountered the dreaded "connect power adaptor to resume encryption" bug (despite the progress bar having completed and then power adaptor indeed being connected. I thought, since I'd not installed much or put any data on, that the easiest solution was to erase the drive and reinstall OSX from recovery. I booted into recovery -> disk utility, chose the Macintosh HD, and went onto the erase tab. After trying to erase, I was met with an error message. I can't remember the details but I think it mentioned not being able to encrypt. I then went to the Reinstall OSX section, but where there was previously the option to select my Macintosh HD, there was now only my external HD. Going back to the disk utility, I can still see the Macintosh HD but there are now only First Aid and Partition tabs, and everything in the partition tab is greyed out. Rebooting the machine only changed one thing: under Reinstall OSX, when selecting a drive, the recovered rive is now visible (though locked). I'm worried I've bricked my 12 hour old baby, can you help me out? Thanks, Joe

Let me see if I have this straight:
Brand new 15" MacBook Air.
You activated FileVault, and the encryption process "froze" when you encountered a bug.
You decided to erase the drive, and re-install Yosemite, but the installer is not giving you Macintosh HD as an available option.
I've never encountered this bug that you speak of, and I've activated FileVault on several Macs over the years, so I can't speak to it directly.
My suggestion is to ensure you have a reliable power connection (ie. check that the power connector is on straight and there's no metal pieces stuck inside to the magnets), re-erase the drive, and then try install Yosemite again.

I can't see my virtualhost when I deploy my application.

Hi,
Weblogic version: 10.3.6
I followed this article steps by steps, but I can't see virtualHost.
Why I can't see my virtualhost when i want deploy my application?
http://weblogic-wonders.com/weblogic/2010/11/19/virtual-hosts-configuration-with-weblogic-server/
Thanks in advance.
Regards Salim.

hi,
can you say which step you stuck up?
thanks

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? Iwas told it will wipe when a new user opens the device.

If I load a video on a nano to give out at a business conference can recipients see the video when they open the device? I was told it will wipe when a new user opens the device.

No, it will wipe it when they try to connect it to a computer and set it up under their own Apple ID. When they turn on the device the first time without connecting it to anything they will be able to see the video.

Can't see other party when face time's connect!

Can't see other party when face time connect. Other party can't see me either !

Do a Reset and try again - [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

Can't see the weather when i swipe down, any ideas?

Updated to iOS7 and now I can't see the weather when I swipe down; I've looked everywhere in settings and can't seem to find a way to do it, can anyone help? Thanks.

Launch the Weather app and let it update. Then, check the Notifications Center again. Note that the weather now displays differently. It is a text description under the date in the "Today" section of NC.
Best of luck.

CS5.5 Audition - The file is open but i can't see the panels to interact with them.

CS5.5 Audition functioned normally yesterday. Now for some reason I can open files, but my workspace panels don't appear. The file is open but i can't see the panels to interact with them.

try launching while holding [shift]

Can't see variables when debugging

I'm just moving up from AS2 to AS3, using CS3. After
searching through the help, I'm finding out most of the stuff I
need to debug with, but I can't seem to see the variables in the
variable window.
I've looked through the documentation, and tried touching all
the buttons they say to touch and setting the publish settings to
allow debugging. Nothing seems to be working.
And, unlike AS2, the program seems to start all by itself, it
doesn't wait till I click on the arrow to begin, and I can't get
the step into and step through buttons to not be greyed out.
What am I doing wrong?
Thanks.

Yes, unfortunately it's not too obvious what you have to do,
which is, when the movie is testing, and with Flash (not Flash
Player) in front, go to the Window menu and in the Debug Panels
check the Debug Console and Variables items. It should remember
next time, until you get a Flash crash, in which case those
settings may reset again.
Once you're used to the AS3 debugging, going back to the AS2
one is mildly depressing!

How can I view the member variable while debugging

When I using JCOP-debug mode in eclipse, I want to view the variable in the Variable window. I can see the "this" instance in the window. But when I click the "+" beside "this" to view the member variables of the instance. Debug process is terminated, following lines displayed in console window:
ASSERTION FAILED: Object header element PAK must be odd!
Expression: (o->pak&1)==1
File: simulation.c
Line: 393
What can I do then?

http://forum.java.sun.com/thread.jspa?threadID=722788
http://download.boulder.ibm.com/ibmdl/pub/software/dw/jcop/tools.zip

When i open my iphoto i can't see my pictures just boxes with nothing in it...help?

When i open my iphoto i can't see any pictures, just boxes outlinine where the pictures used to be. What happend to the pictures?

Something happened - with zero information no one can even guess what happened
What version of iPhoto? What version of the OS? what recently changed?
LN

Can't see member Purchases with Family Sharing

Okay, I wonder if someone can help with this. I setup Family Sharing and was able to add the members I wanted. When I go to the AppStore, i'm able to see their name under the Family Purchases", however when I click on their names, I can't see their purchased. I just get something that says "you have no purchases". I follow the steps on the Apple Article title "If you don't see you family's shared content" and that didn't solve the issue. I also made one for the members to download a free that was shareable, to verify and I still couldn't that one either. In addition, I verified that the email under the Family Sharing was the same for ITunes & AppStore under the setting. Does anyone has solution? I'm not sure if the issue is because I have an older iPhone. I still have the iPhone 4S

I have the same issue - interestingly, I am able to see iTunes purchases. It's just app store purchases that aren't showing up.

Can't see subprocess variables in multiinstance subprocess

Hello.
I'm trying to generate a multiinstance parallel subprocess, but when i create it i can't see the following variables:
- loopCounter
- numberOfActivities
- numberOfCompletedInstances
- numberOfInstances
- numberOfTerminatedInstances
This variables where created automatically in 11.1.1.3 when you created the subprocess as multiinstance, now i´m using 11.1.1.4 and no one of this variables is created.
Please, any help with the topic would be appreciated.
Thanks in advance.

This may not be much help for your 11.1.1.4 issue, but here's how I worked around the problem with the "loopCounter" variable not always being present in 11.1.15 when using subprocess activity with "MultiInstance" selected. I believe there are two bugs that these steps might help you work around.
Oracle BPM's subprocess activity can have two different loop properties. This means that based on an incoming array of information, work item instances are created for each item in the array.
Double click anywhere in the subprocess's grey background to bring up its properties. Click the Loop Characteristics tab.
If you want to simultaneously generate instances based on each item in incoming array, click the MultiInstance radio button. For the "Loop Characteristics" section in the dialog, set this to iterate through each item in the array coming into the subprocess. For example you might have a variable called "parts" that is the array. Use the count( ) method to determine the number of items in the array.
The "Completion Condition" portion of this dialog determines how many separate instances will be spawned by this subprocess. On the left side of the less than sign, use the loopCounter variable that is automatically created when the "MulitInstance" property was selected. On the right side of the less than sign, insert the same count( ) method you used int he "Loop Characteristics" section. This means that this subprocess will continue creating instances until the last item in the array has been hit.
Click the Arguments tab. In theory, you would think that only the item in the array being iterated through would need to be sent into the subprocess as an argument. The problem is that the "loopCounter" variable is not available to be used here. There is a bug that you have to work around. If you click on the "Use Associations" radio button and click the Edit button, in theory you should be able to build an expression that uses the "loopCounter" variable here to just pass a single object into the subprocess. There is a bug that prevents "loopCounter" from appearing when building the expression. As a result, work around the bug by passing in the entire array into the subprocess as an argument.
Add a Script activity in the subprocess to extract the individual item in the array. Use the "loopCounter" in this to set a single item in the array to used by the subprocess.
For this to work, there is one more work around that you have to do. Add a timer activity just before the Script activity you just added. Set the timer to wait one second. This means that a new instance will be created every second until all the items in the array have been run. If you do not add this timer activity, the same instance is created in the subprocess even though you think the loopCounter is iterating through the array. This means that if you do not add this timer activity, if the array has "Supervisor", "Manager", "Shipping Clerk" then all three individual work item instances spawned will all be created for the "Shipping Clerk".

Can't see member variables when debugging with jrockit

Similar Messages

Maybe you are looking for