Can't seem to install ati-driver opengl libs

Hi there.
I recently recovered from a mis-upgrade to Xfree86-4.4 (using a Radeon 9600, which is unsupported).
Anyways, I just realized that I can't get 3d acceleration working. I did fglrxinfo, and the system says this:
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
According to an FAQ I came across, this is supposed to be the ATI's OpenGL libs.
I have uninstalled and reinstalled Xfree86, did the same with the ATI Drivers, and recompiled the fglrx module multiple times, but it is still the same: no ATI OGL drivers installed.
Can somebody help me? Please?
/scratch

keep it together. keep it together.. :?
OK. Here are my config files:
rc.local and modprobe.conf are empty.
rc.conf (removed the comments)
KEYMAP=us
HARDWARECLOCK="localtime"
MODULES=(!usbserial !ide-scsi
fglrx
usb-ohci
snd-intel8x0
snd-pcm-oss
snd-mixer-oss
snd-seq-oss
nvnet
8211
"dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth1="dhcp"
INTERFACES=(lo eth1 eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(!pcmcia network crond inetd)
lsmod gives this:
fglrx 173928 0
keybdev 2244 0 (unused)
mousedev 4180 1
hid 21668 0 (unused)
input 3520 0 [keybdev mousedev hid]
8211 63208 1
soundcore 3972 6 [snd]
usb-ohci 18888 0 (unused)
vfat 10732 1 (autoclean)
fat 32568 0 (autoclean) [vfat]
and the big one: xfreeconfig-4:
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
# Option "NoTrapSignals"
# Option "DontZap"
# Option "Dont Zoom"
# Option "DisableVidModeExtension"
# Option "AllowNonLocalXvidtune"
# Option "DisableModInDev"
# Option "AllowNonLocalModInDev"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# Option "Protocol" "Xqueue"
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# Option "ChordMiddle"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 30-71
VertRefresh 50-160
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=4152
Screen 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Thanks for your help.
/scratch

Similar Messages

Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logic Pro 8, any advise? can I install my Logic 8 in the 10.6.8 OS? Thanks

Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logi Pro 8, I can install the libraries but not the program, is it possible to install or do I have to up-grade to Logic 9? Thanks

It's either that Logic 8 is looking for the Rosetta emulation program or that Logic 8 was previously installed on this OS, in which case you will have to remove some preference files and install receipt.
I think the Rosetta emulation is downloadable for SL.

HT201364 I can't seem to install Mavericks to my mac and my MacBook meet all the Mac requirements

I can't seem to install Mavericks to my mac and my MacBook meet all the Mac requirements...

If you are trying to see if you can track your mac but nothing comes up, be sure the mac is connected to wifi, not just using ethernet cable to a modem.

Hello, I have a Mac OS X, and can't seem to install the creative cloud, I get this pop-up message when I try Er is geen programma ingesteld om de URL 'aam://?passPhrase=QDdPo8BTHv975B1B1f0x3anMggUxp4allBf lsm629RgGXV22ocIlQfI9TMW5vkteaQquFNIFB1uDwU18Z268e

Hello, I have a Mac OS X, and can't seem to install the creative cloud, I get this pop-up message when I try
Er is geen programma ingesteld om de URL 'aam://?passPhrase=QDdPo8BTHv975B1B1f0x3anMggUxp4allBf lsm629RgGXV22ocIlQfI9TMW5vkteaQquFNIFB1uDwU18Z268e69Er6M8XCttQjvdYYdLJ9biyCRQF931 MyMPR0rGvrenZ0e2iougs4l9mlOAHDsfQEDOaqfVInflnZ9 FZSMc=' te openen.
So basically it said that I don't have a program to open it? I already had a trial version on my mac, but deleted it..

YasmineH your web browser is blocking the installation of the AAM Detect plug-in. I would recommend using a different web browser or installing through the Creative Cloud Desktop application. You can find additional details on how to install the Adobe Creative applications included with your membership at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

I can not seem to get the driver for my HP Photosmart C5180 with Windows 7. I can't find it.

I can not seem to get the driver for my HP Photosmart C5180, I can not seem to find it anywhere in the site,, I have 1 XP Pro and 2 Vista PC's running with my printer. I have been trying to find where I can find the driver for my HP Photosmart printer. Just tried to us a new Microsoft 7 PC. Where can I get it ?

From here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153481&task=...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

D/l OK, can't seems to install 23.0.1, 7th try

just can't seem to install this version, now have 7 of the same, but only V22 is installed; also, selected the automatic d/l option, but I guess that doesn't work, I'm on a MAC Pro

Also see
* [[Update Firefox to the latest version]]
For different ways to get firefox updates.

I can't seem to install some apps that i downloaded for my iPad from my Mac. i have tried syncing them but they still don't appear on the pad. how do i go about this?

i can't seem to install some apps that i downloaded for my iPad from my Mac. i have tried syncing them but they still don't appear on the pad. how do i go about this?

These are iPad apps correct?
Do you have restrictions set on the iPad? Settings>General>Restrictions>Installing apps>Off or Settings>General>Restrictions>Allowed Content?
Are you sure that the Apps are selected to sync from the Mac to the iPad?
Connect the iPad to the Mac and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Apps Tab on the right.
Click on Install next to the apps that you want to sync.
Click on the Sync Apps Heading to select it
Click on Apply in the lower right corner of iTunes
If you do not see the sidebar in iTunes 11 - go to View>Show Sidebar from the iTunes menu.

How can find software to install lbp3010b driver, how can find software to install lbp3010b driver

dear all, how can find way to install software driver for lbp3010b, thanks.....

contact makers of stuffilt deluxe http://www.stuffit.com/about/contact.html

I can't seem to install flash player on iPhone or MacBook after snow leopard update...why??

I can't seem to install flash player on iPhone or MacBook after snow leopard update...why?? How can I fix this?

Flash Player doesn't work on IOS devices.
On Macbook, try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player

I can't seem to remove a driver from a driver pack

As weird as it may sound this is what happens to me.
I use Config Mgr 2012, SP1.
I'm currently OSD'ing 6-7 different type of machines, one of those is the Lenovo T520.
I went to Lenovos site and picked up their drivers for this model for Windows 7 x64.
It aborted though during the task sequence, after downloading and applying windows, halfway through installing the driver pack
that I assigned for the model.
Error:
Windowsfailed to start.
A recenthardwareofsoftwarechangemightbethecause.
File:ifM63x64.sys
Status:0xc0000098
Info:Windowsfailed to loada requiredfileBecauseis missingor corrupt.
a bit of googling told me that several other people have had issues with this driver..
"Intel Ethernet FCoE Virtual Storport Miniport Driver Version 1.14.12.0"
The sites I checked seemed to have 100% succes rate by simply removing this specific driver from the package.
They also stated its not an essential driver.
So I completely deleted the driver from config mgr, and of course updated my driver package to the distribution point.
Then got the same error during task sequence
Thought that was pretty weird, to get an error on a driver that was now supposedly non existent..
So I googled some more and saw that some had issues with the driver pack did not actually update even though it said it did.
they fixed this by completely removing it and making a new one.
So I did the following:
1: Deleted the driver Pack
2: Went to the directory and made sure the driver pack had no files left on the server.
3: I created a brand new Driver Pack, I added all the drivers, without the previously deleted 'FCoE Virtual Storport miniport Driver'
4: I make sure the task sequence uses the correct new Driver Pack
And I still get the error. This is where I'm lost.. why am I still getting this error? the driver doesn't exist in SCCM anymore, and I even made a new package

How about this:
Delete the driver package and delete the folder that got created during the creating the driver package
Re-import the drivers for the model, make sure the FCoE driver isn't included in the source
Re-create driver package, distribute it to DPs
Apply Driver Package -step in TS, make sure it uses the new package and it's filtered with WMI (SELECT * FROM Win32_ComputerSystem WHERE Model LIKE '%TS520%' or something that works...)

Can't seem to install iTunes 7.4.3 in Vista

I downloaded the iTunes743Setup from apple and can't seem to get it to run or install. Asks for permission and then seems to run a few seconds and then nothing. Downloaded it again and also updated security center, but still can't install it. Anyone else have this problem? What did you do?

I can get it to install in Vista 64 bit version but it is telling me to uninstall and reinstall because it now is missing files to burn discs. Funny thing it started this after the last update. If I can find a 7.2 version will go back to that one, it worked fine.

I can't seem to install plugins in Final Cut Pro X.

I have tried to install the Magic Bullet LUT Buddy in several different folders and can't seem to get it to install, once I go into Final Cut it is never visible, can someone let me know what I'm doing wrong? I'm fairly new to Macs.

According to their website:
LUT Buddy works with:
Adobe After Effects CS5, CS4, CS3
Adobe Premiere Pro CS5
Apple Final Cut Pro 6, 7
Apple Motion 4, 3
FCPX is not on that list, nor is Motion 5.

Can not install ATI driver for Satellite 1900 notebook

i have the sattellite 1900-203 and i downloaded the winxp driver but every time i try to install it it say
(setup can not copy the fileati2mtag.sy_) any1 has any idea?
how can i contact the technical support ?
thanx

Hi
It will be interesting to know which driver you have downloaded exactly. Is this driver given by ATI or designed by Toshiba?
I dont know in which country you live but on this page you can find the right address http://www.toshiba-europe.com/eu/contact/details.asp?group=By+Country .
Bye

Mid 2010 iMac upgraded SSD, can't seem to install windows via bootcamp. Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems error

I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems" error.
I've scoured the internet trying different solutions that seem to work for everyone else, but to no avail. I've reformatted from that screen, doesn't help. I've removed bootcamp partition and manually partitioned using disk util, leaving it empty once partition-wise, and filling it with a blank partition the second time. I've done a full back up and clean re-install of Yosemite, and nothing seems to be working.
Thats when I switched to DVD install, as I heard sometimes you can't install with a CF card. When I alt-boot, I can see EFI-windows and windows, but if I select EFI-windows, same problem as before, and if I select windows, I get the black screen of "no bootable device please insert boot disk and press any key."
I've been stuck w/o bootcamp for over 2 years now. Anyone, please help?
Mid 2010 iMac running 256gb SSD, Yosemite 10.10.1 trying to install windows 8.1

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Can't modprobe fglrx (proprierary ATI driver)

I have ATI Radeon Mobility M6 LY and
Linux hal2009 2.6.26-ARCH #1 SMP PREEMPT Sun Aug 10 12:29:20 UTC 2008 i686 Intel(R) Pentium(R) M processor 1.60GHz GenuineIntel GNU/Linux
I tried to follow the http://wiki.archlinux.org/index.php/ATI … ary_driver
So I installed "catalyst", added fglrx to MODULES list in /etc/rc.conf, and also rebooted, but I can't modprobe fglrx - I get the following error:
FATAL: Error inserting fglrx (/lib/modules/2.6.26-ARCH/video/fglrx.ko): Cannot allocate memory
Any ideas? Google doesn't seem to be helpful: I haven't found anything useful about this particular error with fglrx.

Unfortunately you're card isn't supported by Catalyst anymore, you should get almost flawless results with the OSS drivers.
M6 uses the RV100 core, it's been documented long ago and the drivers are really mature AFAIK.

Can't seem to install ati-driver opengl libs

Similar Messages

Maybe you are looking for