Can't set disposition of elements properly (front/background...)

hello,
i think i discovered a bug in muse, i add a filled rectangle then i import a png file and put it in front of the rectangle, in the preview all is going well but when i preview the site online or publish it, the png file is appearing behind the filled rectangle.i've checked that my rectangle is in background while the png file is in front. i doesn't correct the problem. anyone encountered the problem ?
thanks in advance fro helping
claude

hello,
yes the background object was marked as footer item, once i've unchecked it, the problem solved itself thank you very much for your fast and very effective answer
claude

Similar Messages

Datagrid: Can I set a tranparency level for column background color?

Hi all,
I have a datagrid with background colors set using triggers. This works. I would like to set a column background color but I don't want to make the color solid because it will block the row color. Is there a way to set the column background color transparency
to 50% (or less) so that I can still see (or blend) with the row background color? I can set the "background" property of the column to a value of "transparent" but this makes no sense without a color.
Thanks
<DataGrid.RowStyle>
<Style TargetType="DataGridRow">
<Style.Triggers>
<DataTrigger Binding="{Binding col_oPutorCall}" Value="call">
<Setter Property="Background" Value="Cornsilk"/>
</DataTrigger>
<DataTrigger Binding="{Binding col_oPutorCall}" Value="put">
<Setter Property="Background" Value="BlanchedAlmond"/>
</DataTrigger>
<DataTrigger Binding="{Binding col_rowColor}" Value="false">
<Setter Property="Background" Value="LightGreen"/>
</DataTrigger>
</Style.Triggers>
</Style>
</DataGrid.RowStyle>
<DataGridTextColumn Binding="{Binding col_oBid, StringFormat=F2}" FontFamily="Arial" FontWeight="Bold" FontSize="12" Header="oB" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="Background" Value= "Transparent" />
<Setter Property="Background" Value= "AliceBlue" />
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>

Background is a brush.
You can define a brush with an opacity in a resourcedictionary merged in app.xaml or in your window.resources ( etc ).
<Grid.Resources>
<SolidColorBrush x:Key="TransparentIshBrush" Color="Red" Opacity=".3" />
</Grid.Resources>
I should think you can then do:
<DataGridTextColumn Binding="{Binding col_oBid, StringFormat=F2}" FontFamily="Arial" FontWeight="Bold" FontSize="12" Header="oB" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="Background" Value="{StaticResource TransparentIshBrush}" />
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
The problem with your former piece of code is that setting an opacity on a datagridcell gets everything in it. You would have to do
<Setter Property="(BackGround.Opacity)"
And I'm rather doubtful that would work anyhow.
Please don't forget to upvote posts which you like and mark those which answer your question.
My latest Technet article - Dynamic XAML

Can't set smart album pictures as desktop backgrounds.

i have imported 'without copying to library' a whole bunch of pics into iphoto and have created smart albums. now i went to 'change desktop background' by control clicking on the desktop and am selecting a pictures from one of the smart albums but its only displaying a blue background. this is true for all smart albums and normals ones as well. when i select an image from the other folders they work fine. what could be the reason?
the primary reason of importing stuff to iphoto was so that they are easily available across applications.

simport
Do you know of any reason why the Desktop pref pane should not be able to use photos in a "referenced" iphoto library
It's just the nature of the beast.
but I just don't trust it enough to do what it will with my photos by having them stored in the iPhoto library.
What are you afraid of?
When you import a pic into iPhoto in the default Managed mode all it does is make a byte by byte copy of the pic. Nothing else. It's an exact copy. It makes no alterations, adds nothing, removes nothing.
The pic is stored in the Finder. Yes, it's in a Unix Style Package file, but apart from all the ways to access your pics I'll describe in a moment, if you want to look inside the package you can do so at any time: Simply right click on the iPhoto Library and select 'Show Package Contents' from the resulting menu. A Finder window will open and you'll see the Library inside.
There are various files, which are the Library itself and some ancillary files. Then you have three core folders
Originals are the photos as they were downloaded from your camera or scanner. (As your Library is referenced the files will be aliases rather than the actual files.
(ii) Modified contains edited pics, shots that you have cropped, rotated or changed in any way.
(iii) Data holds the thumbnails the the app needs to show you the photos in the iPhoto Window.
Remember: iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
Running a referenced library has a number of pitfalls - apart from the fact that System Preferences cannot use the files.
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, there are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Your choice, obviously, but best to be aware of all the ramifications. By all means post back if you require more info.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Other information that may offer comfort:
Events in the iPhoto Window correspond exactly with the Folders in the Originals Folder in the iPhoto Library package file (Right click on it in the Pictures Folder -> Show Package Contents).
You can move photos between Events, you can rename Events, edit them, create them, as long as you do it via the iPhoto Window. Check out the Info Pane (wee 'i', lower left) the name and date fields are editable. Edit a Event Name using the Info Pane, the Event Folder in iPhoto Library/Originals will also have the new name.
Mind you, I don't suggest that you change over in one go. I think the best thing to do is create a new Library (Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library') and set it as a Managed Library. Import 50 or 100 pics an explore it, see how it works and see if that does anything for your confidence.
Regards
TD

How can I set the width of a Text element?

Hello! I have created a custom button with this class:
import javafx.scene.Node;
import javafx.scene.CustomNode;
import javafx.scene.Group;
import javafx.scene.Cursor;
import javafx.scene.shape.Rectangle;
import javafx.scene.paint.Color;
import javafx.scene.paint.LinearGradient;
import javafx.scene.paint.Stop;
import javafx.scene.effect.DropShadow;
import javafx.scene.text.Text;
import javafx.scene.input.MouseEvent;
public class Button extends CustomNode {
    public var text: String;
    public var x: Integer = 0;
    public var y: Integer = 0;
    public var width: Integer = 90;
    var height: Integer = 25;
    override public function create(): Node {
        return Group {
            content: [
                Rectangle {
                    cursor: Cursor.HAND;
                    x: this.x;
                    y: this.y
                    width: this.width;
                    height: this.height;
                    arcWidth: 15;
                    arcHeight: 15;
                    effect: DropShadow {radius: 6};
                    fill: LinearGradient {
                        startX: 0.0, startY: 0.0, endX: 0.0, endY: 1.0
                        stops: [
                            Stop {offset: 0.0, color: Color.WHITE}
                            Stop {offset: 1.0, color: Color.LIGHTGRAY}
                    onMouseEntered: function(e: MouseEvent): Void {
                        (e.node as Rectangle).fill = LinearGradient {
                            startX: 0.0, startY: 0.0, endX: 0.0, endY: 1.0
                            stops: [
                                Stop {offset: 0.2, color: Color.WHITE}
                                Stop {offset: 1.0, color: Color.LIGHTGRAY}
                    onMouseExited: function(e: MouseEvent): Void {
                        (e.node as Rectangle).fill = LinearGradient {
                            startX: 0.0, startY: 0.0, endX: 0.0, endY: 1.0
                            stops: [
                                Stop {offset: 0.0, color: Color.WHITE}
                                Stop {offset: 1.0, color: Color.LIGHTGRAY}
                    onMousePressed: function(e: MouseEvent): Void {
                        (e.node as Rectangle).fill = LinearGradient {
                            startX: 0.0, startY: 0.0, endX: 0.0, endY: 1.0
                            stops: [
                                Stop {offset: 0.0, color: Color.LIGHTGRAY}
                                Stop {offset: 1.0, color: Color.WHITE}
                    onMouseReleased: function(e: MouseEvent): Void {
                        (e.node as Rectangle).fill = LinearGradient {
                            startX: 0.0, startY: 0.0, endX: 0.0, endY: 1.0
                            stops: [
                                Stop {offset: 0.0, color: Color.WHITE}
                                Stop {offset: 1.0, color: Color.LIGHTGRAY}
                Text {
                    x: this.x + 5, y: this.y + 16
                    content: this.text
}But, how can I set the Text element centered into the button?

Stack {
                    layoutInfo: LayoutInfo {
                        width: bind width;
                        height: bind height;
                    content: [Rectangle {
                            width: bind width, height: bind height
                            //fill: bind color;
                            fill: Color.GREEN
                            arcHeight: 20; arcWidth: 20;
                        Text {
                            font: Font {
                                size: 24
                            textAlignment: TextAlignment.CENTER;
                            wrappingWidth: width;
                            boundsType: TextBoundsType.VISUAL;
                            fill: Color.WHITE;
                            content: bind text;
                }wrappingWidth: Sets the maximun width of the text
boundsType: If you put the wrappingWidth var and you want to center a text you MUST set this var to VISUAL

Can I set up Photoshop E

Can I set up Photoshop Elements 10 to spread the workspace over two monitors?

Please post your inquiry to the Photoshop Elements forum.

Sound Blaster Z - how set autodetect connected headphones (into front panel connector)

Hello,
how can I set autodetect connected headphones into front panel on my new Sound Blaster Z?
I have used to use my onboard soundcard (only to my headphones) together with AMD R290X soundcard (via HDMI to Onkyo receiver).
Onboard soundcard was set as default audio device in Windows. So If I connected my headphones into front pannel connector, play only my headphones. If I disconnect headphones, onboard soundcard was disabled and soundcard on R290X was now only active audio device, so music playing only from my speaker (receiver Onky via HDMI on AMD R290X).
Now if I connect my headphones, I have to manualy switch audio device unit in Windows control panel between "SoundBlasterZ" and "R290X HDMI".
It is very annoying. Is there any way to figure it out?
Sorry for my bad english, I hope you understand my problem.
Thank you!

Originally Posted by prachart
Hello,
how can I set autodetect connected headphones into front panel on my new Sound Blaster Z?
I have used to use my onboard soundcard (only to my headphones) together with AMD R290X soundcard (via HDMI to Onkyo receiver).
Onboard soundcard was set as default audio device in Windows. So If I connected my headphones into front pannel connector, play only my headphones. If I disconnect headphones, onboard soundcard was disabled and soundcard on R290X was now only active audio device, so music playing only from my speaker (receiver Onky via HDMI on AMD R290X).
Now if I connect my headphones, I have to manualy switch audio device unit in Windows control panel between "SoundBlasterZ" and "R290X HDMI".
It is very annoying. Is there any way to figure it out?
Sorry for my bad english, I hope you understand my problem.
Thank you!
Hi prachart,
You will need to set Sound Blaster Z as the default playback audio device in the window control panel -> sound -> playback. Make sure you connect the physical connector from the front panel to the Sound Blaster Z card. This will let you plug into the headphone and able to playback. However, the AMD R290X HDMI port will not be able to have any sound as the default playback device set to Sound Blaster Z and it will not automatically release control and toggle to the available plug-in device.
You will need to go to control panel to toggle again if you want to have the sound from the HDMI port.
I am sorry if the above are not much help but this is the design implementation of the sound card so that there is no compromise in the sound quality.

When setting up adobe element 13 and entering my serial number, a pop up says my serial number is incorrect. Can you help me with my problem?

How can I continue setting up photoshop element 13 when an error message says my serial number is incorrect?

You want the Photoshop Elements forum:
Photoshop Elements
Are you using a Mac serial number for a PC or vice versa?

How can I bring back the default setting in photshop elements 4.0

HP Pavilion desktop M7240UK
Monitor HP vs19 LCD
Windows XP
Explorer 8
Service Pack 3
Photoshop Elements 4.0
Hi
How can I bring back the default setting in Photoshop elements 4.0
Thank You
York44

In the editor? Quit the editor , then restart it while holding down Ctrl+Alt+Shift. Keep holding the keys till you see a window asking if you want to delete the settings file. You do.

Can't set Photoshop Elements 11 as default photo editor

When I right click on an image in Windows Explorer or Adobe Bridge, then click on "open with", in the list of image viewers and programs, Photoshop Elements is not listed. When I browse to the PE11 .exe file to select it, nothing happens. How can I set PE11 to be the default photo editing program?

Try this thread:
<http://forums.adobe.com/thread/1146909?tstart=0>
In particular read everything from post #9 to post #17
Good luck.

How can I set up Elements 12 to put my Nik Edits onto a seperate Layer

How can I set up Elements 12 to put put my Nik edits onto a seperate Layer
and would XXL help with its Smart Object Filters (Smart Filters
Thankyou

Also, just a note. iMac PPC is about iMacs that were available up to early 2006. iMac Intel is for iMacs that were made available early in to 2006 to present. Forums for what you have in your profile include:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
https://discussions.apple.com/community/ilife/iphoto
https://discussions.apple.com/community/notebooks/macbook
Please consider posting and reviewing those locations in the future when you have a question that pertains to one of those products. You'll much more likely get a resposne then. This is a user to user forum, and you have to seek knowledge in the areas that are most likely to have the topic of your interest.

Can I set the stroke of an object to be on top/in front and the fill on the bottom/in back?

Can I set the stroke of an object to be on top/in front and the fill on the bottom/in back? I asked this question before and was told to go to appearance and drag the fill and stroke around as if they were a layer, but this did not bring my stroke to the top of the image. Did I do this wrong somehow or is there another method?

Erin,
The default stacking order for an object with fill and stroke, such as a simple path, is that the stroke is on top and the fill is beneath it.
You may change that in the Appearance palette, but it should not be necessary.
Can you show a screenshot with the object and the Appearance palette and the Layers palette with the relevant (part of the) Layer expanded and visible?
If things are really wrong, you may start considering going down this dark road:
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set the highlighted button according to the last chapter viewed?

I have a main menu with four buttons, each one of which takes me to a different chapter of track 1. When I press the MENU button on the remote and return to the main menu, I would like for the highlighted button to be the one corresponding to the last chapter viewed. How can I do this?
Page 247 of the DVDSP manual says the following:
Highlight Condition: Provides an alternative method to the Default Button setting for determining which button to highlight. When Highlight Condition is set to Default, the Default Button setting supplies the button highlight setting. When Highlight Condition is set to one of its stream settings (audio, subtitle, camera angle), the number of the stream last played determines the button to highlight. This setting can be overridden by any element that jumps to this menu, based on its jump setting.
I know that SPRM 7 contains the value of the current chapter, so when returning to the main menu I would like to use SPRM 7 to set the Highlight Condition, but I don't see a way to do that, since the only options for Highlight Condition are audio stream, subtitle stream, and camera angle.

Ah. Pre-scripts.
I would do this by tracking the menu, certainly, but I'd do that by using a set of scripts not as prescripts. So, if your main menu is the start up item for the disc, create a script that reads:
mov GPRM0, 1
Jump main menu
and set that as the start up item instead. Now create a second script:
mov GPRM0, 2
Jump Menu2
and use both of these scripts on any button that goes to a menu. For example, on the Main Menu you'll have a button that links to menu2... point that button to script 2 instead of the menu itself. Similarly, on the chapter menu if you've got a button that takes you back to the main menu, point that button to the first script.
For your menu call script you can now do this:
mov GPRM1, SPRM8
div GPRM1, 1024
Jump Main menu \[GPRM1\] if (GPRM0 = 1)
Jump Menu2 \[GPRM1\] if (GPRM0 = 2)
This could also be the end jump script for both tracks, too.
Now, Main menu will have three buttons, one for track 1, one for track 2 and one to go to the second script. Track 1 menu call and end jump goes to the last script, track 2 does the same. On the chapter select menu you point each button to the relevant chapter in track 1 and let the scripts do their job whenever a menu call is made or the track ends. The script will see you were on Menu2 and send you there, and SPRM8 will get you back to the button you last selected.
If, instead of this, you want to go to the button that represents the last chapter played on the chapter menu, and not the last button pressed, but still be able to get to the last button on the main menu then the script changes a bit:
Goto 5 if (GPRM0 = 2)
mov GPRM1, SPRM8
div GPRM1, 1024
Jump Main menu \[GPRM1\]
mov GPRM1, SPRM7
Jump Menu2 \[GPRM1\]
This sends you to the button relevant to the last chapter played if you came from the chapter menu, by jumping through the script to the bit that deals with Menu2, else it will work out the last button selected (and we assume this must have been on the Main menu because GPRM0 !=2 in that case), and send you to the main menu with that button highlighted.
If you've got any more scripts than that running, you've got too many... and get rid of the pre-scripts - they are more trouble than not, and don't work if you are using GPRM based button jumps anyway.

E-mail synch, read/unread, how can I set this up?

I'd like to refer to an older question I found which hadn't been answered properly.
https://discussions.apple.com/thread/3557308?start=0&tstart=0
Quite simply, the question is;
I have my work e-mail, my Hotmail and my Gmail all set-up on my iPhone 4S and my iPad 1st gen.
When I read an e-mail on the computer via browser or outlook, I would like for this e-mail to appear as READ on my devices as well.
Vise versa for when I read it on the iPad/Phone and I want that e-mail to show as read on Outlook and browser.
Because this doesn't happen automatically, the Mail icon on my home screen is constantly showing over 1K e-mails, when in reality I may have like 10 on each e-mail account.
How can I set this up?
Is it possible for my to set this up for deleting e-mails also?
I know I can do that on Gmail, delete from server blah blah, but how about when I delete e-mail from Outlook...I want them to be off my phone also.
It's a business e-mail, and I get like over 50 read/received notifications that spam my inbox.
Thank you for taking the time to read and for any advice you may have.

Please go to
1.Setting
2. mail,contacts and calenders
3. add accounts
4. insert your email account and password
5. Autometically imports your mails if you open mail folder on the desktop..
That is it.

Can I set up a Skype to go number for myself?

Can I set up a Skype To Go number in Canada for myself and then give it to friends, family, clients etc. to call me? I just learned Skype doesn't have any Canadian numbers. I'm a Skype video conference subscriber. I probably wouldn't have signed with Skype if I knew they didn't service Canada properly.

Danberesford wrote:
1. Can I set up a Skype To Go number in Canada for myself and then give it to friends, family, clients etc. to call me?
2. I probably wouldn't have signed with Skype if I knew they didn't service Canada properly.
Hello,
1. Yes this is possible in a limited way. You would need to register each of your family/friends/clients' phones in your Skype To Go program. Only those who are registered could dial your Canadian STG number and have it ring on your Skype or on your phone. You wouldn't be able to give out the number at random because STG will ask for verification if a non-registered phone calls the number.
2. Unfortunately the Online # program can't be introduced in Canada until the Canadian telco authorities issue the necessary licenses.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Can't set disposition of elements properly (front/background...)

Similar Messages

Maybe you are looking for