Can't set up static IP with systemd: "Dependency failed for"

I bootstrapped Arch Linux into a free partition from an Ubuntu Server installation. It boots fine, but I can't seem to get the network working.
My router is weird in that the last number of the IP address has to be over 200 (so 192.168.1.[must be over 200]), so dhcpcd won't really work for me and I need to set up a static IP.
To do this, I decided to edit the systemd static IP template from this wiki page (leaving "Wireless" in the name but removing the actual wireless line, as I'm using a wired connection): <https://wiki.archlinux.org/index.php/Ne … IP_address>
Here's my modified script: <http://sprunge.us/BVRA>
However, when I run "systemctl start newnetwork [what I named the service]", I still can't ping either IP addresses or domain names. When I run "systemctl status newnetwork", I get "Dependency failed for Wireless Static IP Connectivity" and it says that the service is not running.
I have all of base and base-devel installed, so what could be the problem? It seems like the only other people who have encountered that systemd error message have had significantly different problems.
For what it's worth, I used this method to bootstrap the system: <https://wiki.archlinux.org/index.php/In … _Archlinux>
Thanks ahead of time for any help.

Welcome to the forums.
You can actually use dhcpcd to assign a static address too with the "-S" option.
My first guess for your error would be that the interface is not "eth0" (though the error message seems odd for that, yes).
Whats the output when you bring the connection up manually (description right above the wiki .service file you link)?

Similar Messages

  • Plain user and systemd: dependency failed for local file system

    I tried to switch to systemd, but ended up in a maintenance console (Enter root password or Ctrl-D to continue):
    Enter password.
    journalctl -b as suggested yields "Dependency failed for local file system".
    I couldn't find a systemd troubleshooting page in the Wiki. So, can someone point me to such a page? Anyone willing to give some hints?
    What I did so far: Did what https://wiki.archlinux.org/index.php/Systemd tells one should do to switch to systemd.
    In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
    Somewhere I read that "mkinitcpio -p linux" should be issued to make systemd work. No (positive) effects.
    Paul
    P.S.: Shouldn't there be a topic "systemd" in "Pacman Upgrades, Packaging & AUR"?

    skunktrader wrote:
    poseidon wrote:In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
    According to the wiki you are supposed to append init=/usr/lib/systemd/systemd if you are using the "Mixed systemd/sysvinit/initscripts installation" mode.  In all other configurations you should NOT have an init=.... entry since init becomes a symlink to systemd
    As far as I know, the init= entry doesn't hurt anything - it just isn't necessary.
    EDIT: Of course, it will hurt if the path was wrong...
    Also, at least on my system, /bin/systemd symlinks to /usr/lib/systemd/systemd.
    Last edited by cfr (2012-11-19 23:53:55)

  • How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    How can I set up two iPhones with the same contact, photos, music etc... but a different sim card and phone number. They will both be my phones, but one will be for use in other countries.

    Phone A = phone with information you want duplicated
    Phone B = phone that you want to copy from A
    Backup Phone A.
    Wipe Phone B using these instructions. What to do before selling or giving away your iPhone, iPad, or iPod touch - Apple Support
    Phone B should be on the 'Hello' screen. Do not swipe it. Launch iTunes. Plug in Phone B.
    When iTunes asks if you want to set up as new phone or restore from backup, choose restore from backup of Phone A.
    After this setup, any changes to one phone (i.e. adding a contact, downloading an app) will have to be manually duplicated on the second phone, if that is your desire). Making changes to one phone will not affect the other after setup.

  • Can i set up itunes account with apple id and NO credit card???

    Can i set up itunes account with apple id and NO credit card???

    Yes, see link below
    http://support.apple.com/kb/HT2534

  • Can i set up a trackpad with macbook air

    can i set up a trackpad with macbook air

    By trackpad do you mean the Apple Trackpad or a third party device? You can setup the apple trackpad yes just like a wireless keyboard under bluetooth

  • How can I set up iCloud sync with Outlook 2007 using Hotmail account?

    Hi,
    I installed iCloud PC control panel. I tried to sync my contacts and calendars from Outlook (2007) to the cloud but I gets this message: "Add an e-mail account to Outlook Before setting up iCloud". I have an Hotmail account synced up into my Outlook via Outlook Connector. Can iCloud sync with Hotmail accounts?
    What should I do to get my calendars and contacts synchronize to the cloud. Does Outlook 2007 can be synced by the cloud too?
    How can I set up iCloud sync with Outlook 2007 using Hotmail account?

    I found a way to fix this, it did the trick for me:
    https://discussions.apple.com/thread/3109623
    All you have to do is include a new e-mail account [email protected] (set it as a default) on Outlook with the options that are showed in the thread I linked and you should have the calendars and tasks syncronised. It works perfectly with ipod touch, ipad and Outlook 2010 on windows 7.

  • Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

    The link is to a discussion started on 12/18 in the FiOS Internet forum.  Here's the link I get now, however it is different than the link I pulled a few hours ago.  If this system changes the link again, it may not work.
    http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
    You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
    Here's a link that is in the thread that gives more detail.
    https://secure.dslreports.com/faq/15984
    Good Luck!
    P.S.  "Copper Contributor" is my "rank."  gs0b is my user name.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Is it true that I can trade in my iPhone 4s (with an upgrade available) for a $200 gift card to put toward the 6? If so, I used my upgrade and paid $130 yesterday and ordered a 5s. Can I send it back once it comes in the mail and get my money and upgrade

    Is it true that I can trade in my iPhone 4s (with an upgrade available) for a $200 gift card to put toward the 6? If so, I used my upgrade and paid $130 yesterday and ordered a 5s. Can I send it back once it comes in the mail and get my money and upgrade back?

    That's correct kayraypole! For our upgrade eligible customers, we have a deal that you can trade in any iPhone for a $200 Verizon Wireless gift card. Here's a link so you can check it out, www.trade-in.vzw.com. If you already upgraded & you are within 14 days of purchase then you can return the 5s, restocking fee may be applicable, and take advantage of this promo. How awesome is that!
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • HT204053 When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

    When updating some apps at the app store under an old apple id I get an error that id or password is wrong. How can one change an old id with a new id for these apps?

    1. Launch the App Store
    2. Select Store->Sign Out
    3. Select Store->Sign In and replace the Apple ID with the one you want to use

  • Can't set ipv6 static address

    As the topic states, I can not setup a static IP to save my life. I've enabled ipv6, I have a hostname6.ce1 I put the hostname (madrid-ipv6) in the hostname6.ce1 file but it will not stay set.
    I've tried the addif command, and it creates a logical interface, but I can't ping out with the address that is set.
    I'm sure I am missing something, and I am new to Solaris. I've got ipv6 static addresses setup in linux with no problems. It's just Solaris 10 that is kicking my butt.
    If anyone can point me in the right direction I would be in your debt.
    Thanks!

    edit: To darren: I've tried that as well. When the system boots, it gives me the error: "Failed to assign ipv6 address to ce1" or something similar to that.
    hmmm, I've tried that, it still doesn't seem to be working. Here is my hostname6.ce1 file:
    madrid-ipv6
    addif fd01::e2/64 up
    this is the output of ifconfig -a6:
    bash-3.00# ifconfig -a6
    lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
    inet6 ::1/128
    ce0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
    inet6 fe80::203:baff:fe9b:92d/10
    ether 0:3:ba:9b:9:2d
    ce1: flags=2000840<RUNNING,MULTICAST,IPv6> mtu 1500 index 3
    inet6 fe80::203:baff:fe9b:92d/10
    ether 0:3:ba:9b:9:2d
    ce1:1: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 3
    inet6 fd01::e2/64
    and this is what I get when I ping fd01::f2:
    bash-3.00# ping fd01::f2
    ICMPv6 Address Unreachable from gateway fd01::e2
    for icmp6 from fd01::e2 to fd01::f2
    ICMPv6 Address Unreachable from gateway fd01::e2
    for icmp6 from fd01::e2 to fd01::f2
    ICMPv6 Address Unreachable from gateway fd01::e2
    for icmp6 from fd01::e2 to fd01::f2
    I've got to be missing something. This is all on a private switch that doesn't need to connect to the net. I need to connect an iscsi VTL to this sun system but the first step is to be able to ping the damn thing. I've checked the networking to make sure everything is connected. I can ping the VTL using IPV4, but not IPV6. I've checked on a linux system and it can ping the VTL over IPV6 so I know it is setup properly. This is just driving me nuts.
    Edited by: jonwheeler on Sep 11, 2008 9:47 AM

  • Setting UP Static IP With WRT54G router

    Setting a static IP shouldn't be a problem, since setting the static IP is done on the computer.  So why am I having such a problem?? Let me tell a little about my setup.
    I have a DSL connection.  My DSL netopia modem uses PPPoe of course, and broadcast a DHCP connection to my WRT54G router.  3 computers are connected to this router. 1 desktop (vista) wired and 2 laptops (XP) wireless/wired. I'm attempting to create a static IP for the desktop and later for the laptops, but each time I do, I lose internet connectn nor am I able to connect to DSL modem at 192.168.1.254
    Within the router I have changed the DHCP count to 5, with the starting IP as 192.168.1.1.  Linksys help advise to change IP to 192.168.2.1, but I still get the same problem when creating a static ip.
    Within desktop (vista Home Premium SP1), I have changed the local area network to the following:
    IP          - 192.168.1.060
    Mac      - 255.255.255.0
    Gateway-192.168.1.1
    DNS      -192.168.1.1
    Once I change the IP to above, from obtain auto, I lose the connection.
    Later the laptops IP address will be changed to 192.168.070 and .080 
    Aren't static Ip address suppost to be outside the DHCP range?
    Isn't the gateway address my router?
    apoloize for the big questions, but tried to get all information within it.
     Thanks
    balltripii

    Before doing this, In Windows go to run and type CMD hit enter. In the command prompt, type ipconfig /all and record your DNS server/servers if more than one. Not getting the proper DNS server information, will prevent you from going to websites like linksys.com by typing linksys.com in the address bar, instead you would have to know the IP of linksys.com to browse the page, not very user friendly and I can barely remember my phone number, let alone IP addresses of all the sites I go.
    Log into your router. Leave your WAN settings alone, since that will determine your settings for the connection to the internet. Now configure your Network settings on the router. The 192.168.1.1  or 192.168.2.1 for the ip and leave the subnet mask 255.255.255.0 as is. Disable DHCP on the router. DHCP is a service that the router will use to issue out IP addresses automatically. This is the complete opposite of what you are trying to do with a static connection. Once these settings have been changed, you will need to configure the connection on the PC and any other connecting device to the router via wired or wireless since DHCP is now disabled. If not, you will just be stuck all day while the network adapter trys to get a network address and DHCP has a heart attack.
    Configure your network adapters. Assign the IP address. If you used 192.168.1.1 then the IP will need to be 192.168.1.2 through 192.168.1.254 with a subnet mask of 255.255.255.0 or if you used 192.168.2.1 the IP will need to be 192.168.2.2 through 192.168.2.254 with subnet mask of 255.255.255.0 and enter the DNS server information as recorded from earlier. Default gateway will be whatever the IP address of the router you configured. 192.168.1.1 or 192.168.2.1 etc etc etc.
    Just remember to not duplicate any IP address when configuring other devices and all should work well.
    This worked fine for me earlier today when I needed a static connection.

  • Can not call a static function with-in a instance of the object.

    Another FYI.
    I wanted to keep all of the "option" input parameters values for a new object that
    i am creating in one place. I thought that the easiest way would be to use a
    static function that returns a value; one function for each option value.
    I was looking for a way to define "constants" that are not stored in
    the persistent data of the object, but could be reference each time
    the object is used.
    After creating the static functions in both the "type" and "body" components,
    I created the method that acutally receives the option input values.
    In this method I used a "case" statement. I tested the input parameter
    value, which should be one of the option values.
    I used a set of "WHEN conditions" that called the same
    static functions to get the exact same values that the user should
    pass in.
    When I try to store this new version, I get the error:
    "PLS-00587: a static method cannot be invoked on an instance value"
    It points to the first "when statifc_function()" of the case function.
    This seems weird!
    If I can call the static method from the "type object" without creating
    and instance of an object, then why can't I call it within the body
    of a method of an instance of the object type?
    This doesn't seem appropriate,
    unless this implementation of objects is trying to avoid some type
    of "recursion"?
    If there is some other reason, I can not think of it.
    Any ideas?

    Sorry for the confusion. Here is the simplest example of what
    I want to accomplish.
    The anonymous block is a testing of the object type, which definition follows.
    declare
    test audit_info;
    begin
    test := audit_info(...);
    test.testcall( audit_info.t_EMPLOYER() );
    end;
    -- * ========================================== * --
    create or replace type audit_info as object
    ( seq_key integer
    , static function t_EMPLOYER return varchar2
    , member procedure test_call(input_type varchar2)
    instantiable
    final;
    create or replace type body audit_info
    as
    ( id audit_info
    static function t_EMPLOYER return varchar2
    as
    begin
    return 'EMPLOYER';
    end;
    member procedure test_call(input_type varchar2)
    as
    begin
    CASE input_type
    WHEN t_EMPLOYER()
    select * from dual;
    WHEN ...
    end case;
    end;
    end;
    The error occurs on the "WHEN t_EMPLOYER()" line. This code is only
    an example.
    Thanks.

  • How can I set up company ipads with preloaded apps and files?

    I want to set up multiple ipads with preloaded apps and files before handing them out to employees.  We intendend the employee to be able to install their own content on the device using their own itunes account.  When I attempted to connected to a pc using a personal account my the content obtained by the company account was prompted to be removed.  Was this done incorrectly?  Is there a way I can set up company ipads with preloaded apps and files so that they don't get removed when the user connects them to another computer with another itunes account?
    Right now we are looking to have the employee use their own itunes account and reimburse the expense for the needed apps, but this could be an issue if they leave the company and the device is reassigned.

    Yes this is possible. I've been using Apple Configurator to do this (you could also use iTunes to restore backups). The trick is, you need to tell the end user not to sync apps within his/her iTunes on his/her computer. You will need to instruct the end user to download apps OTA using the App Store on the iPad rather than with iTunes on his/her computer. If the user tries to sync apps on his/her computer, it will wipe out apps that you installed. However if the user downloads apps OTA, your apps and the user downloaded apps will both stay on the iPad.
    When you hand the iPad to the user, be sure to log out of your company Apple ID on the iPad at Settings -> Store and have them sign in with their personal Apple ID. That way it is all set for them to download apps under their own Apple ID.
    ~Joe

  • Can you set a second "Open with:" application for a file?

    Hi all,
    I was wondering if something like this exists for OS X Lion or greater: you can set a default application to open a type of file, say Safari for all .html files, but can you set a second default application for a file?
    I usually open files using command + o or command + down arrow from the Finder and I've often thought how good it would be to hit an alternate keyboard shortcut to open the selected file in a secondary default application.
    For example, if I'm making a web page and have the .html selected in the finder I can hit command + o (or command + down arrow) to open it in Safari and if the file isn't open in my editor and is selected in the Finder I can hit, say command + option + o (or command + option + down arrow) to open the .html file in my editor.
    Does anyone know if this can be achieved in OS X Lion or greater?
    Any advice is greatly appreciated.
    Thanks.

    Hi all,
    If anyone's interested in a partial solution, I've rigged up the following.
    I ended up using an Automator action coupled with Spark to capture a keyboard key combination. Spark: http://www.shadowlab.org/Software/spark
    I've used Spark before with good results, and although it's from 2008 it still works on Lion.
    I created an Automator action that does two things:
    gets the selected Finder items
    opens finder items in the text editor I'm using.
    I then saved the workflow as an application so that Spark could run it.
    I've set up a keyboard shortcut that Spark picks up and calls my Automator workflow. It all seems to work nicely.
    So, I've created a specific "open selected file with <text editor>" keyboard shortcut that should do for the time being.

  • HT5622 Can I set my new ip5 with my existing apple ID which i used before for my 4S?

    Hi all, I had a 4S but it damaged totally now and I bought an iphone5. Can I set up it with existing account? In that case, can I restore all my apps I used in 4S?

    when you connect the new phone it should ask you if you wish to restore it from a backup of the old one
    then you say yes
    and then it's a copy of the old device in terms of data

Maybe you are looking for