Can't Start Oracle BPM Workspace
I'm trying to start oracle BPM workspace through this URI http://localhost:7001/bpm/workspace but it gives me an error which is:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
If anyone know about that,please help me.I can't complete my semester project_
Note: it works when I try to start the following URIs:
http://localhost:7001/console/login/LoginForm.jsp
http://localhost:7001/em
Most likely you didn't check the 'Oracle BPM Suite'/'Oracle BPM Suite for developers' when you configured the SOA domain. Go to '<YOUR_MIDDLEWARE_HOME>\Oracle_SOA1\common\bin\' and run the config.cmd.
Choose 'Extend an existing Web Logic Domain' and then be sure to select 'Oracle BPM Suite'/'Oracle BPM Suite for developer'. Then it should work.
Good luck,
Mihai
Similar Messages
-
Error during addition of external link to oracle BPM workspace
Hi All,
I just want to add an external link to oracle BPM workspace and I've followed this tutorial :
http://docs.oracle.com/cd/E28280_01/user.1111/e15175/bpmug_ext_apps.htm
but I am neither able to view the required, nor getting any error.
During deployment time I'm only getting this message :
Issues were encountered while parsing this deployment to determine module type. Assuming this is a library deployment.
I'm using the virtual m/c version : oel5u5-64bit-soabpm-11gr1-ps4-fp-Workshop-Exp_2
Please help me to resolve the issue.
Thanks in advance.What I meant to say is check the logs at the time you are getting the error since sometimes the logs can be huge in size
-
How can i start oracle databases? i am using Oracle 8.1.6 for linux.
when i run dbstart,it gives me following message:
Database "ora4cweb" warm started.
but when i use sqlplus,it says:
ORA-01034: ORACLE not available
i made a mistake ,i shutdown my linux before i shutdown oracle databases,how can i start oracle databases now?thanks in advance.try it without the scripts...
login to linux as oracle
start server manager
svrmgrl
connect internal
startup
select sysdate from dual;if that works
exitcheck listener
lsnrctl
statif nothing running type
start
exitnull -
How to display workitems values with Hyperlink in Oracle BPM workspace
Hi,
In Oracle BPM workspace , is there any way to display hyperlinks for work items i,e., I want to give a hyperlink to the values displayed in the default columns under the work items. So that if user clicks any hyperlink , a new information window will be displayed.
Thanks
Bharath.Hi,
If you create a derived table and pull the objects i guess it should work. Other wise this error will throw up.
There are some ideas to resolve this here, but not sure it will work - Error trying to modify SQL in Data Provider
Arun -
Oracle BPM Workspace with Jasper
Hi all,
Can someone please guide me to documentation with examples of where I can find integration steps of BPM Workspace with Jasper for reporting purposes? I tried googling on the same but could not find anything in particular.
Thanks
Edited by: user2997085 on Feb 11, 2010 7:12 PM...seems nothing happend: the BPM Workspace login page it is opened and there isn't any message in the log indicating that the new provider...
Is there an Audit provider configured, which collects and stores the security logs.
To my knowledge, WebLogic uses the same cookie name (<code>JSESSIONID</code>) for all web applications on the server.
That way, no matter what type of authentication method is used in a particular web application, an authenticated user will have
single sign-on to all other web applications in the server.
If you want to have a global single sign-on a good solution would be to use Oracel Single Sign-On (http://download.oracle.com/docs/cd/E17904_01/core.1111/e10043/osso_d_10g.htm)
With your own implementation how is the authentication token mapped to a username? -
Oracle BPM Workspace and IE 11 Compatibility issues
Hi all,
I am using Oracle BPM 10g and when I use IE 9 (till IE 11) or firefox latest versions , chrome,etc.. I get a pop-up with the title "execution" and unable to close the pop-up as well.
Can you please suggest if there is some configurations I should look into?
However, the strange thing is when I enable "Compatibility view settings" in IE 9 and higher, there are no issues seen and the workspace is rendered as expected.
Kindly help.
Thanks and Regards,
AliceHi Alice,
Not the answer you were looking for, but here is the compatibility matrix for Oracle BPM 10g.
Oracle BPM Interoperability Matrix
Looks like IE 9 is not supported for some reason, but versions other versions of IE and Firefox are. You might have to reach out to Customer Support.
Dan -
Help me! why can not start oracle management server?
maybe for my shutdown and startup database abnormal for several
times,now the server oracleorahome81management server can't start
and while i logon to enterprise manager console,it show me a
error as follow
"vtk-1002:The Oracle Management Server you are trying to connect
to is still in the process of initialization. Please wait for it
to start up completely and then try logging in again"
the error also when i restart my machine.
and,the configuration assistant can not logon to database.
but sql*plus,sql worksheet can work normal.Hi,
Sock Hoon (guest) wrote:
: I have just installed Oracle Application Server (OAS) on my
: machine running Windows NT 4.0 Workstation. When I logon to the
OAS don't run on Win NT with installed service pack 4.
Go back to service pack 3 or apply patch from Developer 6.0 to
OAS.
: OAS manager and tried to start ORB, I got below error message:
: Please wait while the command is being processed on host ssoh_x
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: Starting ORB processes...Returning filename D:
: \orant\orb\admin\.event
: waiting for ORB to be ready...
: YOT-11034, Unable to make address: IP://ssoh_x.jgfhome:2649.
: Error: YT::EXCEPTION::BADPARAM::NOSUCHADDR
: ORB is not responding. Please restart manually...
: I have tried to re-install OAS for the second time. But I still
: got the same problem.
: I plan to use the OAS, together with Oracle Internet Commerce
: Server (ICS) to develop an e-commerce project. I am yet to
: download and install the ICS. I don't have any Oracle databases
: installed in my machine. I'm using MS SQL Server 7.0 instead.
: Please advised me on how to configure the ORB so that I'll be
: able to start the application server.
Best regards Andrew
null -
Can i start oracle forms and reports 11g services in linux with opmnctl ?
Hi:
I am so confused with weblogic and forms 11g that i don't know nothing at all looll :)
Someone told me that to start oracle forms i need to this
[oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...
Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
Regards
RicardoHi Ricardo,
Someone told me that to start oracle forms i need to this
[oracle@biz ~]$./startManagedWebLogic.sh WLS_FORMS
This scripts asks for a password and that's annoying... and it just stays waiting there.. i mean does not stay running in background... So if i finish my ssh session it will shutdown...After starting WLS_FORMS, you can very well send it to background.
Press Ctrl+Z and then type bg it will move it to background
>
Today at oracle support they told me that i still can start forms with OPMN using opmnctl as we use to do in 10g... Is this possible? Does anyone here have a startup script for forms and reports 11g under linux? How do you guys start forms and reports?
with just opmnctl we cant run Forms I believe, we need to have WLS_FORMS also running ..
Forms requires ohs or wc to be up and running along with WLS_FORMS , thats is what is my understanding .. -
How can I start oracle databse in linux ?
I have rebooted the machine and oracle database did not start.
How can I start manually oracle database ?
Thanks a lot !!!sqlplus
connect as sysdba
startup pfile=<Path to your init.ora> -
Where can I download "Oracle BPM 10g R3" ?
Hi All,
Could you please tell me where I can download "Oracle BPM 10G R3" ? It is a bit of funny for me in the sense that I can download full document of this version from
http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/
But cannot find where is the software ?
Many Thanks in advance.
Regards
Pearapon S.Hi,
You can download OBPM 10gR3 directly here:
http://www.oracle.com/technology/software/products/bpm/index.html
Also for more useful links on: docs, config matrix, etc, please check:
http://blogs.oracle.com/alextoussaint/2008/10/oracle_bpm_10gr3_is_out.html
Best Regards,
--alex -
Can`t start oracle instance 11gR2 on Ubuntu 10.4
I noticed something that some diretories are named using my hostname (phoenixbai) while others use localhost.
e.g.
./cdata/localhost
./localhost_ora11g
./localhost_ora11g/sysman/emd/upload/localhost_host_host_configuration_old
./oc4j/j2ee/OC4J_DBConsole_localhost_ora11g
./log/phoenixbai (DIR)
when I rename localhost in ./oc4j/j2ee/OC4J_DBConsole_localhost_ora11g, ./localhost_ora11g with phoenixbai, i can start the oracle instance.
but still, I can`t start lsnrctl & emctl. here is the listener.ora, tnsnames.ora, and /etc/hosts details:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
ADR_BASE_LISTENER = /u01/oracle
ORA11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora11g)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1522))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENER_ORA11G =
(ADDRESS = (PROTOCOL = TCP)(HOST = phoenixbai)(PORT = 1522))
127.0.0.1 phoenixbai localhost.localdomain localhost
127.0.1.1 phoenixbai phoenixbai
127.0.0.1 localhost localhost
#127.0.0.1 phoenixbai phoenixbai
#127.0.1.1 localhost localhost
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsAnyone any idea?
Please help! if you need any more info, let me know!Hi;
Duplicate post:
http://forums.oracle.com/forums/thread.jspa?threadID=1111584&tstart=0
If possible please change this thread status to answered(dublicate post), it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Can't start Oracle Directory Manager
Hi,
I have installed and configured OID in OFM11g, but I have no idea how to validate it. I am not sure whether I configured it successful.
I have installed identity server 10.1.4.3.0 refering to link . It said that if I installed it successful, I can start OAM Identity Server service ( [step 18|http://www.oracle.com/technology/obe/fusion_middleware/im1014/ovd-oam/oam-ovd/install_oam/install_oam.htm#t2] Start -> Control Panel -> Administrative Tools -> Services, right-clicking the Oracle Access Manager Identity Server (identity) service, and selecting Start.) However, when I start the service, I can't see Oracle Directory Manager ( [step 19|http://www.oracle.com/technology/obe/fusion_middleware/im1014/ovd-oam/oam-ovd/install_oam/install_oam.htm#t2] ). Actually, nothing happened.
When you completed the installation of Identity Server, could you open the Oracle Directory Manager ?
Your help is appreciate.
Best,
Sunny.Zhang
Edited by: Sunny.Zhang on 2009-10-4 上午10:21Hi,
You can validate OID installation through 'opmnctl' and/or 'ldapbind'. You can access 'Oracle Directory Services Manager' through a browser using the url -
'http://<host>:<port>/odsm/faces/odsm.jspx'.
Here is a link which shows screenshots of the overview of 'Oracle Directory Services Manager'.
-- Pramod Aravind -
HI
Am Just starting oracle serviceORCL..but it is getting error...since yesterday i was run oracle successfully..and last night i just did "shut immediate"
and today morning i came up with this error
Could not start the OracleDBConsoleORCL service on Local Computer. Error 1053: The service did not respond to the start or the control request in a timely fashion.
C:\Documents and Settings\srinivasa>ping localhost
Pinging OAKDENE-0027.oakdeneindia.net [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\srinivasa>lsnrctl
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-NOV-2011 10:43
:02
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> stat
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-NOV-2011 10:24:36
Uptime 0 days 0 hr. 18 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\srinivasa\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File d:\app\srinivasa\diag\tnslsnr\OAKDENE-0027\listener\al
ert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.oakdeneindia.net" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.oakdeneindia.net" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> start
TNS-01106: Listener using listener name LISTENER has already been started
LSNRCTL>please help me on this
Thanksnewbie wrote:
HI
Am Just starting oracle serviceORCL..but it is getting error...since yesterday i was run oracle successfully..and last night i just did "shut immediate"
and today morning i came up with this error
Could not start the OracleDBConsoleORCL service on Local Computer. Error 1053: The service did not respond to the start or the control request in a timely fashion.
C:\Documents and Settings\srinivasa>ping localhost
Pinging OAKDENE-0027.oakdeneindia.net [127.0.0.1] with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\srinivasa>lsnrctl
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-NOV-2011 10:43
:02
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> stat
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 29-NOV-2011 10:24:36
Uptime 0 days 0 hr. 18 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\app\srinivasa\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File d:\app\srinivasa\diag\tnslsnr\OAKDENE-0027\listener\al
ert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.oakdeneindia.net" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.oakdeneindia.net" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> start
TNS-01106: Listener using listener name LISTENER has already been started
LSNRCTL>please help me on this
Thanksno listener is required to start or access local DB -
Can't start Oracle XE in Ubuntu LInux
hi everyone, i've just installed the oracle xe version for Linux as deb file, i could start and install it to my linux pc. Then, i tried to start Oracle database from,
applications> oracle database 10g express edition > start database;
i get an error, my user is not a member of dba group. Then, i changed group my user to dba, then i start the database, there will be nothing. I am trying to connect via sql plus,
SQL> CONN
Enter user-name: HR
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Warning: You are no longer connected to ORACLE.
SQL>
i am getting this error, do you have any advice to solve this problem?
Thanks for responses.Reason: You are connected to an idle instance so on sqlplus
username pwd screen enter credentials, hit enter.
You will be prompted for username and pwd
enter / as sysdba on username
will say connected to an idle instance then
issue a startup command -
Different instance numbers in Oracle BPM Workspace 11g
Hi!!
I'm running the QuoteProcessLab, I launched the process and in the first activity 'Enter Quote Details' I just save the info, so I see the instance created with number 200043. If I login into te workspace with jstein I see the instance in the 'Process Tracking' Tab with the same instance number 200043. But if I did an advanced search in the 'Process Tracking' tab it retuns the instance with the number 20002.
The question is: why the instance number is different if i see it in the inbox and if i see it as a result of an advance search???
I found it a little bit complicated to trace an instance....
Thanks!
AnaHi Venkat,
The SOA Suite is responsible for storing all instances of BPM (active, suspended or terminated).
No more the concept of purging instances that were in version BEA Aqualogic 5x, 6x.
So the records of instances will be stored in the database "forever" until you make a DBA or a purge of data in the database.
More information: http://docs.oracle.com/cd/E17904_01/integration.1111/e10226/soaadmin_partition.htm
Regards,
Paulo H.
Maybe you are looking for
-
Microsoft Word 2007 - Clickable Hyperlinks in Headers/Footers
Hi there, I am in the process of creating a site document for a client and as it is in electronic format, I am using bookmarks and Hyperlinks to help readers navigate the document more easily. The problem I am having at the moment is with the documen
-
Freight not to be loaded on the Material Cost in Purchase Order
Hi, For Purchase Order, we want to configure a scenario where in we want the freight not to be loaded on the Material Cost. Where need to change in the configuration do achieve the same. Please guide. Regards, PK
-
BI admin cockpit - how to install the BI content Web templates
Hi Gurus, We have installed BI admin cockpit. we have also installed Bex required queries. now I wanted to install all web templates (SAP format 3.x) in BI content. after installing I checked WAD but I cannot see them their also when I go to metadata
-
My volume button moves rapidly back and forth. It distorts the sound on my movies/music. Why is this happening and how can I make it stop? E
-
Yosemite upgrade from Mavericks left me with a white screen.
i dont think the install completed And now my computer won't start up. It shows the apple icon and a progress bar and then just does nothing. I've turned it off and on a few time with the same result. Any ideas?