Can't start Peer Name Resolution Protocol

I can't start the service 'Peer Name Resolution Protocol' which is required for HomeGroups.
There are 3 Peer services on my machine. One is running (Peer Networking Identity Manager). The other one (Peer Networking Grouping) is not because it depends on 'Peer Name Resolution Protocol' which fails to start.
Both Homegroup services are started and I have IPV6 enabled on my NIC and in my LAN properties.
The event log has this:
'The Peer Name Resolution Protocol cloud did not start because the creation of the default identity failed with error code: 0x80630801.'
Using the Event ID web search it leads me to this:
Event ID 102 â€” PNRP Protocol
I tried what they suggested (it's for Vista) but to no avail. Perhaps some Permission got borked. Is there a way to recreate the RSA folder and sub-folders with correct Permissions or perhaps it's some other type of problem?
I do notice I have a lot of entries in "C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys"
Any help in getting this Service started will be appreciated.

Hi,
This issue can occur by corrupted PNRP service. You can perform the following steps to troubleshoot the issue.
1. Please download the correct Network Connection registry file from the link below:
http://cid-6df3bca839e981ef.skydrive.live.com/self.aspx/.Public/PRNP.txt
2. There will be the PRNP.txt file. Please right click it and rename it to PRNP.reg file.
3. Double click the PRNP.reg file and click Yes to import the file.
Note: To avoid unexpected situation, please back up the computer registry before importing the registry file.
4. Then, please verify the Peer Name Resolution Protocol service and other failure service again.
a. Click "Start", go to run, type "services.msc" (without quotation marks) in the open box and press Enter.
Note: If you are prompted for an administrator password or confirmation, type your password, or click Continue.
b. Right click the "Peer Name Resolution Protocol" service and choose Properties.
c. Click on the "Log On" tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.
d. Click on the "General" tab; make sure the "Startup Type" is "Automatic". Then please click the button "Stop" under "Service Status" to stop the service.
e. Then please click the button "Start" under "Service Status" to start the service.
f. Click OK.
What's the result?
If the issue persists, please also perform the suggestions from the following article.
Home Group Issues
Thanks,
Novak

Similar Messages

How can I fix local name resolution problems

I have a Macbook Pro Retina running 10.8.4. One thing I've always had problems with is resolving my local names.
When connected via wifi, I can ping localhost just fine. However my computer's name is finney. And I cannot ping finney. However I can ping finney.local. Other machines on my network can also ping finney.local. I've always been able to live with this inconvenience 'till now. This macbook needs to run a local service that uses the value returned from hostname -s as the name of the machine and then tries to connect with that name.
In System Preferences -> Network -> wifi -> TCP/IP I've set my DHCP client ID to finney.local. So the hostname command returns finney.local and hostname -s returns finney. I can't believe I've spent so much time trying to figure a way around this.
My preferred options would be to figure out how to make it so I can ping this computer using its name finney. My DHCP server at home is a wifi router, through which I can find no option to specify a name for my macbook.
My second choice would be to figure out how to get hostname -s to return finney.local. At least if I could do that then my rabbitmq instance would be able to startup.
I'd be much appreciative if someone could help with some suggestions on how to get around these problems.
Thanks in advance,
Derek

Wow, that did the trick.
This has been a problem I never knew the solution to ever since I swithced to OSX 4 years ago.
Much thanks!
Derek

Can't start names server

When I tried to start the names server on my Linux Server,
it can't be started, just error messages shown:
NAMESCTL> start
Starting "/u03/app/oracle/product/8.1.7/bin/names"...server not started, errors
follow
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
Linux Error: 13: Permission denied
NAMESCTL>

Raymond, can you submit your TNSNAMES.ora entry for the database you are trying to connect to?

Can't start MAIL or STORE because of "too low screen resolution"

I can't start either mail app or store app because of "too low screen resolution".
My netbook (eMachines eM350) has maximum 1024x600, these app require at least 1024x768

I have developed a lot of code, and while more recent machines have higher resolutions, I find it prudent not to assume everyone has an 8K panel
No one cares much what you have or have not done, this thread is not about you. If you'd actually developed any Modern apps you'd know that the minimum resolution for them is, as has been stated numerous times here already. Stating that you develop for 640x480
displays clearly indicates that you've never developed a Modern app. Additionally, it should be obvious even to you that a minimum resolution of 1024x768 does not assume that everyone has "an 8K panel".
go write some shaders you clearly have no idea whatsoever about development
i can make programs rescale to fit any screen size, just because you are too stunned to figure that out
programmatically designed dialogs can adapt
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

I can't remember the name of the game where you have to throw a stickman off a ledge and cause as much damage as possible, can anyone help me please? i'm sure the start screen had the yellow hazard sign...

i can't remember the name of the game where you have to throw a stickman off a ledge and cause as much damage as possible, can anyone help me please? i'm sure the start screen had the yellow hazard sign...

Can't help you with that. But perhaps you can help me remember the name of my favorite book from when I was a child. The cover was blue.....
Seriously, try googling something like "iphone game stickman".

Can't start GTK apps on Kdemod

Hi,
I'm very new to Arch, but I've managed to install some things I need so far. I did a FTP install and then installed x and kdemod, fixed screen resolution, installed nvidia driver, configured alsa. I think I want to stay on Arch, I really like it's speed and the package manager pacman.
Anyway I can't start GTK apps, currently I've Firefox, Seamonkey and Gparted installed but when I click on their shortcuts in K menu nothing happens, when I try to start in terminal I get
gparted
No protocol specified
(gparted:7468): Gtk-WARNING **: cannot open display: :0.0
I have gtk2,glib2,gtkmm and kdemod-gtk-qt-engine installed.

lo enabled?
Don't know how to check.
hostname in /etc/hosts?
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost
# End of file
Last edited by Boreas (2007-11-02 05:55:59)

Module Function Name Resolution - Issues with DefaultCommandPrefix

Just getting started on module development, running PS4, and I've run into an... inconsistency... that I'm trying to understand. I've got two test functions, Get-Something and Set-Something in a script module. In my manifest file I specify a DefaultCommandPrefix
of 'Test'.
My issue is the function name resolution doesn't result in an executable result if you leave PowerShell up to it's own process.
To begin with I closed all sessions and deleted all files in the CommandAnalysis directory. After starting a session I waited for the CommandAnalysis cache to populate. Then I ran a series of test commands to illustrate how, most of the time, the function
name PowerShell registers with tab completion can't be executed because it lacks the 'Test' prefix. Even worse, much of the time tab completion won't recognize the correct (i.e., with prefix) name of the function and honor tab completion for it.
Having just learned of the CommandAnalysis cache I assumed I would see it change as PowerShell 'learned' more about the module because the name resolves differently over time. I've included three files at the end of this post, the module code (ModuleTest.psm1),
the manifest (ModuleTest.psd1) and the capture of output to the PowerShell session (ModuleTest.txt). I've tried to include the times I used <tab> and <ret> for tab completion and execution as well as (comments in parenthesis for things I did like
starting a new session and checking the CommandAnalysis cache for changes).
An example is, when first starting a session typing 'get-som<tab>' will resolve to 'Get-Something' (prefix 'Test' missing) and typing 'get-test<tab>' won't resolve to 'Get-TestSomething'. Try to execute the 'Get-Something' from tab completion
and you'll get the 'name not recognized, blah, blah'.
Now if you type 'get-som<tab>' PowerShell will resolve to 'ModuleTest\Get-Something' - looks promising... but no. Try to execute the 'ModuleTest\Get-Something' from tab completion and you'll still get the 'name not recognized, blah, blah'.
Even though the same key strokes resolved differently there were no changes made to the CommandAnalysis cache so I'm lost on why it produces two different (though equally useless) results.
Manually importing the module and sometimes running Get-Command -Module ModuleTest will make tab completion of the function names behave correctly. Is this a known issue with using DefaultCommandPrefix in script modules or is there something I need to include
in the manifest to enforce strict name recognition (including the prefix)?
<ModuleTest.psm1>
function Get-Something
Write-Host "Get-Something Executed"
function Set-Something
Write-Host "Set-Something Executed"
<ModuleTest.psd1>
# Script module or binary module file associated with this manifest
ModuleToProcess = 'ModuleTest.psm1'
# Version number of this module.
ModuleVersion = '1.0.0.0'
# ID used to uniquely identify this module
GUID = '241877ff-64be-40c8-a603-8d5acf7a48d8'
# Author of this module
Author = 'wb3'
# Company or vendor of this module
CompanyName = ''
# Copyright statement for this module
Copyright = '(c) 2015. All rights reserved.'
# Description of the functionality provided by this module
Description = 'Module description'
# Minimum version of the Windows PowerShell engine required by this module
PowerShellVersion = '2.0'
# Name of the Windows PowerShell host required by this module
PowerShellHostName = ''
# Minimum version of the Windows PowerShell host required by this module
PowerShellHostVersion = ''
# Minimum version of the .NET Framework required by this module
DotNetFrameworkVersion = '2.0'
# Minimum version of the common language runtime (CLR) required by this module
CLRVersion = '2.0.50727'
# Processor architecture (None, X86, Amd64, IA64) required by this module
ProcessorArchitecture = 'None'
# Modules that must be imported into the global environment prior to importing
# this module
RequiredModules = @()
# Assemblies that must be loaded prior to importing this module
RequiredAssemblies = @()
# Script files (.ps1) that are run in the caller's environment prior to
# importing this module
ScriptsToProcess = @()
# Type files (.ps1xml) to be loaded when importing this module
TypesToProcess = @()
# Format files (.ps1xml) to be loaded when importing this module
FormatsToProcess = @()
# Modules to import as nested modules of the module specified in
# ModuleToProcess
NestedModules = @()
# Default command prefix
DefaultCommandPrefix = 'Test'
# Functions to export from this module
FunctionsToExport = '*'
# Cmdlets to export from this module
CmdletsToExport = '*'
# Variables to export from this module
VariablesToExport = '*'
# Aliases to export from this module
AliasesToExport = '*'
# List of all modules packaged with this module
ModuleList = @()
# List of all files packaged with this module
FileList = @()
# Private data to pass to the module specified in ModuleToProcess
PrivateData = ''
<ModuleTest.output>
PS C:\Scripts\PowerShell> Get-ChildItem -Path 'C:\Program Files\WindowsPowerShell\Modules' -Recurse<ret>
    Directory: C:\Program Files\WindowsPowerShell\Modules
Mode                LastWriteTime     Length Name
d----          3/5/2015   9:06 AM            ModuleTest
    Directory: C:\Program Files\WindowsPowerShell\Modules\ModuleTest
Mode                LastWriteTime     Length Name
-a---          3/5/2015   8:50 AM       2907 ModuleTest.psd1
-a---          3/5/2015   9:01 AM        140 ModuleTest.psm1
PS C:\Scripts\PowerShell> Get-Module -ListAvailable<ret>
    Directory: C:\Program Files\WindowsPowerShell\Modules
ModuleType Version    Name                                ExportedCommands
Script     1.0.0.0    ModuleTest                          {Get-Something, Set-Something}
PS C:\Scripts\PowerShell> get-som<tab>
PS C:\Scripts\PowerShell> Get-Something<ret>
Get-Something : The term 'Get-Something' is not recognized as the name of a cmdlet, function, script file, or operable
program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Get-Something
+ ~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Get-Something:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-som<tab>
PS C:\Scripts\PowerShell> ModuleTest\Get-Something<ret>
ModuleTest\Get-Something : The term 'ModuleTest\Get-Something' is not recognized as the name of a cmdlet, function,
script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is
correct and try again.
At line:1 char:1
+ ModuleTest\Get-Something
+ ~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (ModuleTest\Get-Something:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab>
PS C:\Scripts\PowerShell> Get-TestSomething<ret>
Get-Something Executed
(New Session)
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab><ret>
get-tes : The term 'get-tes' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ get-tes
+ ~~~~~~~
    + CategoryInfo          : ObjectNotFound: (get-tes:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
PS C:\Scripts\PowerShell> Import-Module ModuleTest<ret>
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab><ret>
PS C:\Scripts\PowerShell> Get-TestSomething
Get-Something Executed
(New Session)
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab><ret>
get-tes : The term 'get-tes' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ get-tes
+ ~~~~~~~
    + CategoryInfo          : ObjectNotFound: (get-tes:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException
PS C:\Scripts\PowerShell> Get-Command -Module ModuleTest<ret>
CommandType     Name
ModuleName
Function        Get-TestSomething
ModuleTest
Function        Set-TestSomething
ModuleTest
(No change in CommandAnalysis cache)
PS C:\Scripts\PowerShell> get-tes<tab>
PS C:\Scripts\PowerShell> Get-TestSomething<ret>
Get-Something Executed
PS C:\Scripts\PowerShell> moduletest\get<tab><ret>
PS C:\Scripts\PowerShell> Get-TestSomething<ret>
Get-Something Executed
William Busby, PMP

Hi William,
yes, that's something you'll either have to do the hard way or live with admin confusion.
If you're using Sapien's PowerShell Studio as an Editor (hint: Usually a great idea), you can very easily rename a function, even in a multi-file module project, by rightcklicking on the function-name and selecting "rename".
Alternatively you can do a bulk rename with Powershell:
Get all functions in your module (Load it and check exportedcommands)
loop over each function-name
calculate new name
search your entire project for all references and replace them.
Let me see ...
function Rename-ModulePrefix
[CmdletBinding()]
Param (
[Parameter(Position = 0, Mandatory = $true)]
[string]
$ModuleName,
[Parameter(Position = 1, Mandatory = $true)]
[string]
$OldPrefix,
[Parameter(Position = 2, Mandatory = $true)]
[string]
$NewPrefix,
[Parameter(Position = 3)]
[string]
$Path
# Catch all typos
Import-Module $ModuleName -ErrorAction 'Stop'
# Get root path if not manually passed
if (-not $PSBoundParameters["Path"])
$Path = (Get-Module $ModuleName).Path
# Get module files
$Files = Get-ChildItem -Path $path -Recurse -Include "*.ps1", "*.psm1", "*.psd1"
# Iterate over each file
foreach ($file in $Files)
# Null variable in case you get an empty file somewhere and run this from Win 7
$data = $null
# Get Content of file
$data = Get-Content $file
# Replace strings
foreach ($c in (Get-Module $ModuleName).ExportedCommands)
$newName = $c.Name -replace $OldPrefix, $NewPrefix
$data = $data | ForEach-Object { $_ -replace $c.Name, $newName }
# Write back to file
$data | Set-Content $file
While I didn't proof it, in theory this should do it (Make a backup before running it :) ).
Cheers,
Fred
There's no place like 127.0.0.1

Can't Start WL 6.1sp1 on Win2000sp1

I can't start WL 6.1sp1 on my win2000 laptop, but WL6.0 works.
for some reason it can't find weblogic.server.
I tried several re-installs no luck.
Class path look good
my classpath is
weblogic\bea\wlserver6.1>set CLASSPATH=.;.c:\weblogic\bea\jdk131\lib\;c:\weblogic\bea\wlserver6.1\lib\weblogic_sp.jar;c:\weblogic\bea\wls
er6.1\lib\weblogic.jar;
error messages is
Loaded sun.net.www.protocol.file.Handler from c:\weblogic\bea\jdk131\jre\lib\rt.jar]
Loaded java.io.IOException from c:\weblogic\bea\jdk131\jre\lib\rt.jar]
sage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
here options include:
-hotspot to select the "hotspot" VM
-server to select the "server" VM
-classic to select the "classic" VM
If present, the option to select the VM must be first.
The default VM is -hotspot.
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Loaded java.lang.Shutdown$Lock from c:\weblogic\bea\jdk131\jre\lib\rt.jar]

Can you try this:
CLASSPATH=.;c:\weblogic\bea\jdk131\lib\;c:\weblogic\bea\wlserver6.1\lib\weblogic_sp.jar;
c:\weblogic\bea\wlser6.1\lib\weblogic.jar
"David L. Wasler" wrote:
I can't start WL 6.1sp1 on my win2000 laptop, but WL6.0 works.
for some reason it can't find weblogic.server.
I tried several re-installs no luck.
Class path look good
my classpath is
weblogic\bea\wlserver6.1>set CLASSPATH=.;.c:\weblogic\bea\jdk131\lib\;c:\weblogic\bea\wlserver6.1\lib\weblogic_sp.jar;c:\weblogic\bea\wls
er6.1\lib\weblogic.jar;
error messages is
Loaded sun.net.www.protocol.file.Handler from c:\weblogic\bea\jdk131\jre\lib\rt.jar]
Loaded java.io.IOException from c:\weblogic\bea\jdk131\jre\lib\rt.jar]
sage: java [-options] class [args...]
(to execute a class)
or java -jar [-options] jarfile [args...]
(to execute a jar file)
here options include:
-hotspot to select the "hotspot" VM
-server to select the "server" VM
-classic to select the "classic" VM
If present, the option to select the VM must be first.
The default VM is -hotspot.
-cp -classpath <directories and zip/jar files separated by ;>
set search path for application classes and resources
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-showversion print product version and continue
-? -help print this help message
-X print help on non-standard options
Loaded java.lang.Shutdown$Lock from c:\weblogic\bea\jdk131\jre\lib\rt.jar]

Can't Start Pulseaudio

Hi,
I don't know why but I can't start pulseaudio or alsamixer. I used to be able to start them, but I forgot what I had to do to get them running. I was just using it as a simple volume control when I had it working.
I've tried:
[gulliver@myhost ~]$ pulseaudio --start
E: [pulseaudio] main.c: Daemon startup failed.
[gulliver@myhost ~]$ start-pulseaudio-x11
E: [pulseaudio] main.c: Daemon startup failed.
[gulliver@myhost ~]$ alsamixer
ALSA lib pulse.c:229:(pulse_connect) PulseAudio: Unable to connect: Connection refused
cannot open mixer: Connection refused
[gulliver@myhost ~]$ pulseaudio
E: [pulseaudio] main.c: Unknown command: (eg. when X is not active)
E: [pulseaudio] main.c: Failed to initialize daemon.
[gulliver@myhost ~]$
Verbose isn't any different.
In another thread I read somebody trying. I got a pretty large output.
[gulliver@myhost ~]$ pulseaudio --log-level=4 --log-target=stderr
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 1.1
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.1.5-1-ARCH #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
D: [pulseaudio] main.c: Found 2 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: All asserts enabled.
I: [pulseaudio] main.c: Machine ID is c1b3c15dc26d22642398743300001ac8.
I: [pulseaudio] main.c: Session ID is c1b3c15dc26d22642398743300001ac8-1326592649.892198-2012670361.
I: [pulseaudio] main.c: Using runtime directory /home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-runtime.
I: [pulseaudio] main.c: Using state directory /home/gulliver/.pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-1.1/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/gulliver/.pulse/c1b3c15dc26d22642398743300001ac8-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-jackdbus-detect.so': success
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-bluetooth-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 7660e9b219ab55868191f04200000028 as :1.18609
D: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
D: [pulseaudio] bluetooth-util.c: Bluetooth daemon is apparently not available.
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #5; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #6; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #7; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #8; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-stereo' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'alsa_input.pci-0000_00_1b.0.analog-stereo' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #10; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null (probably pre-v1.0 data)
D: [pulseaudio] module-device-restore.c: Attempting to load legacy (pre-v1.0) data for key: sink:auto_null
D: [pulseaudio] module-device-restore.c: Size does not match.
D: [pulseaudio] module-device-restore.c: Unable to load legacy (pre-v1.0) data for key: sink:auto_null. Ignoring.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null:null
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:auto_null.monitor (probably pre-v1.0 data)
D: [pulseaudio] module-device-restore.c: Attempting to load legacy (pre-v1.0) data for key: source:auto_null.monitor
D: [pulseaudio] module-device-restore.c: Size does not match.
D: [pulseaudio] module-device-restore.c: Unable to load legacy (pre-v1.0) data for key: source:auto_null.monitor. Ignoring.
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:auto_null.monitor:null
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: sink:auto_null:null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #11; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-console-kit.so': success
I: [pulseaudio] client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] module-console-kit.c: Added new session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-cork-music-on-phone" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #19; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-1.1/modules/module-dbus-protocol.so': success
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-x11-bell" (index: #21; argument: "sample=bell-windowing-system").
E: [pulseaudio] main.c: Unknown command: (eg. when X is not active)
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 removed from object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry removed from object /org/pulseaudio/stream_restore1/entry1
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #4).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-bluetooth-discover" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-bluetooth-discover" (index: #5).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #6).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #6).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #7).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #7).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-gconf" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-gconf" (index: #8).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #9).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #10).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-null-sink" (index: #11).
D: [pulseaudio] module-always-sink.c: Autoloaded null-sink removed
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device removed from object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink removed from object /org/pulseaudio/core1/sink0
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device removed from object /org/pulseaudio/core1/source0
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: pulsecore/hashmap.c: entries flist is full (don't worry)
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source removed from object /org/pulseaudio/core1/source0
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
D: [null-sink] module-null-sink.c: Thread shutting down
I: [pulseaudio] module.c: Unloaded "module-null-sink" (index: #11).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
D: [pulseaudio] module-console-kit.c: Removing session /org/freedesktop/ConsoleKit/Session1
I: [pulseaudio] client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #16).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #16).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-cork-music-on-phone" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-cork-music-on-phone" (index: #17).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #18).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #19).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-dbus-protocol" (index: #20).
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 removed from object /org/pulseaudio/core1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module removed from object /org/pulseaudio/core1/module19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats removed from object /org/pulseaudio/core1/memstats
I: [pulseaudio] sink.c: Freeing sink 0 "auto_null"
I: [pulseaudio] source.c: Freeing source 0 "auto_null.monitor"
I: [pulseaudio] module.c: Unloaded "module-dbus-protocol" (index: #20).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] module.c: Unloading "module-x11-bell" (index: #21).
I: [pulseaudio] module.c: Unloaded "module-x11-bell" (index: #21).
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to remove event.
I: [pulseaudio] main.c: Daemon terminated.
I don't know how to decipher what it's telling me or how to fix it.

The lines starting with E are your errors, which tell you what the (perceived from pulse) problem is.

*** WARNING: Could not start service 80 for protocol HTTP on host MyFQDN

Hi,
I m configuring an external Sap webdispatcher to point to an ICF service
I need to install it on Windows Web server where others web sites are running.
I configured a specific ip for that on the Web servers and enter the DNS name in our domain.
On the the pfl file I define :
SAPLOCALHOSTFULL=<MyFQDN>
icm/host_name_full =<MyFQDN>
and specify icm/server_port_0 = PROT=HTTP,PORT=80
Each time I m starting it I received *** WARNING: Could not start service 80 for protocol HTTP on host <MyFQDN> .........
If I m using another port (Ex:86)no problem with my FQDN.But if I m doing servername:86 it s working also.
It s seems that the webdispatcher don t care about my FQDN.
How can I have the WEBDISPATCHER pointing to this specific FQDN and not all ?
Thanks,

Hi Damien,
You problem is perfectly logical : It's not possible to have 2 programs (IIS and web dispatcher) listening together on the same 80 HTTP port.
There is no configuration that I know on the web dispatcher to tell him to listen only on one IP address.
Summary : what you want to do is not possible.
I had a similar request and I did the following.
I use a Linux box with an Apache reverse proxy to select to distribute the HTTP requests on different web dispatchers. The rules depends from the called URLs.
Regards,
Olivier

I can't start listener in the Control Painel/Admin Tools/ Services

Windows XP - Home Edition (I know it´s not the better but came with my laptop)
I installed the Oracle 10g and I don't know why I have 3 listener as services. Its services showed me different messages when I tried start it:
1. OracleOraDb10g_home1TNSListener: Could not start the 2. OracleOraDb10g_home1TNSListener service on Local Computer
2. OracleOraDb10g_home1TNSListenerORCL: The OracleOraDb10g_home1TNSListenerORCL service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
3. OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER: The OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
====PATH======
Path=C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\oracle 8i\bin;C:\oracle\
product\10.1.0\Db_3\jdk\jre\bin;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classi
c;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classic;C:\oracle\product\10.1.0\Db_
3\jlib;C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C
:\oracle\product\10.1.0\Db_3\jre\1.4.2\bin\client;C:\oracle\product\10.1.0\Db_3\
jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\ATI Technologies\ATI Control Panel;%java_home%\bin;C:\Program Files\Commo
n Files\Ulead Systems\MPEG;C:\WINDOWS\system32\gs\gs8.13\bin
====REGISTRY======
TNS_ADMIN I set as Binary Data in the HKEY_CURRENT_USER\Environment with the path C:\oracle\product\10.1.0\Db_3\NETWORK\ADMIN
====LISTENER.ORA======
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
====TNSNAMES.ORA========
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====SQL.ORA========
NAMES.DEFAULT_DOMAIN = 192.168.0.17
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
=======OS CONFIGURATION================
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 23-MAR-2006 08:23
:44
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.17)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Ethernet adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . : myhome.westell.com
IP Address. . . . . . . . . . . . : 192.168.0.17
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
C:\>
Please, if somebody knows this problem I need a very urgent help. Thank you very much.

Thanks ALL, I GOT IT, but I used other solution.
Since I installed and uninstalled the Oracle several times, it keeps also many different Services for the listener. I don't know why, it didn't create a Service for my actual instalation with its path. In other words, all the services remained in the services.msc panel, had the path that was already removed from the Windows folder.
Then what I did, was that I picked one service, took its name (OracleOraDb10g_home1TNSListener), went to regedit to [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\OracleOraDb10g_home1TNSListener] and simply changed the image path that was setted for the one that was removed (C:\oracle\product\10.1.0\Db_2\BIN\TNSLSNR ) for mine that is installed right now
(C:\oracle\product\10.1.0\Db_1\BIN\TNSLSNR). Nothing more and finally works.
I have tried something in the services.msc panel before, as you can see in this forum at the thread "I can't start listener in the Control Painel/Admin Tools/ Services", but I never got
success.
Appreciate your time!!

LMs 3.2 name resolution preference

we currently using host file for name resolution for LMS server and we will going to DNS, and I am curious if DNS fast enough to do for LMS to amange 4k devices, specially on device discovery, or CM. also on DNS search prifx our sub domain is the 3rd prefered not the first one. with all these i have some doubt. please if you have experiance moving from host to DNS please share your experiance or suggestion. thanks

Hi,
"Our Device Discovery 3500 Devices -> 4hrs ------------ Cisco white paper data -> 15 minute for 5K
Our Device Data Collection 3500 Devices ->11 hrs ------------Cisco white paper data -> 4 hrs for 5k
Oour User Tracking Discovering 3550 devices and 30k Devices-> 23hrs ------------Cisco white paper data -> 1.26 hrs for 100k "
Well, this all depends how we have configured community strings on the CiscoWorks and how is the network response when query will send to the devices.
The performance depicted in the White papers are more like examples and it may vary from network to network. But another fact is how we have configured the CiscoWorks to collect the data from devices like for example while doing Device Discovery if you have 300 devices in DCR already and select the option "Use DCR list for Device Discovery" then obviously it will start the 300 discovery thread from these devices and it will take lot more time to discover the devices in network. Similarly if you have configured, multiple community string for different types of devices and in the discovery setting you provide the target *.*.*.* for 1st community and *.*.*.* for two more community string, then it will again take considerable time to discover the devices since each community string will be reffered for all the devices again and again.
Bottom line is , the time varies from network to network and also how you can fine tune your configureation setting in CiscoWorks.
Here is the good doc link to get the better understanding of "Device Discovery"
https://supportforums.cisco.com/docs/DOC-9005
Hope it helps too.
Thanks,
Gaganjeet

Can't start two listeners at the same time

Hello -
I am running Oracle 10g R2 on Solaris 10. I am getting the following error when I try to start my second listener "TNS-01106: Listener using listener name ccn_listener has already been started". There are multiple VIPA's assigned to the server, so I am trying to start two listeners at the same time (I can start each one separately). The different IP's are referenced in the listeners (even though they use port 1521), so there should not be a conflict. I also gave the two listeners distinct non-default names. The listeners are running under two differenct Oracle homes.
Here is the code of the listeners:
listener 1:
PHD_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.49.236.119)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_PHD_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u02/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME=phdv410g)
(ORACLE_HOME = /u02/app/oracle/product/10.2.0/db_1)
(SID_NAME = phdv410g)
listener 2:
CCN_LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.49.236.131)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
SID_LIST_CCN_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME=ccn10gt1)
(ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1)
(SID_NAME = ccn10gt1)
If anyone has any ideas about why I can't start these two listeners togethers, I would really appreciate it.
Thanks!

Hi,
Look at the error: "Listener already started"...
Can you check if that is right ?
ps -ef | egrep lsnrWaiting for feedback.
Regards,
Yoann.

In OWA, name resolution does not use Contacts

We migrated from Exchange 2003 to Exchange 2010.
When I go into OWA, and starting a new email, I can type part of a contact name. I use Alt K and the name won't look in my Contacts to resolve the name.
I can type part of a name that exists in our global address list and use Alt K and the name gets auto populated.
Why isn't OWA looking at my contacts first to resolve names? In OWA settings, I have Contacts selected under E-Mail Name Resolution...When resolving names, check first in:

Hi AdminSteve,
According to your description, I understand that cannot use Alt+K to resolve name of contacts in OWA when migrate from Exchange 2003 to 2010.
I find an article about this, please refer to Email name resolution section in below links:
http://office.microsoft.com/en-001/office-online-help/options-messaging-HA102846737.aspx#_Toc375227061
When resolving names, check first in this option if you want to first use your personal contacts to resolve a recipient name. If Outlook Web App can't resolve the name in your contacts, it will look in the global address list.
For your question, I want to double confirm whether personal contact configure abnormal or be damaged.
Best regards,
Allen Wang

HELP. Capture the Hdv with the Apple prores422 Capturing, but i can't chande the name of the file

Hello there,
i'm conforming an hdv shot while i capture it into FCP whit the setting of Apple pro res422.
So the point is that when i start to capture the only thing that i can controle is to give the name of the file that i'm going to capture..
everything is ok, but whet i have to chage the tape and so..the name of the file it does not work, even if i write the new name he keep the last name that i use...
i don't know what to do, i can't change the name after i capture because he capture the tape creating different file at all the stop of the shooting, so that i have alot of file for one tape..
it looks like he keep in memory some protocols with the first name i give..but how i can change it when i change the tape??
thnak u
fede

When you are logging your tape prior to capture you can do this. For example, tape one contains scenes 1,2 and three, multiple takes of each. Go to the beginning of scene one take 1. Mark an in point. Go to the end of all the takes of scene 1 and mark an out point. Log the clip as scene one. Do the same for scenes 2 and three. Hit the batch capture button.
Then as it captures it creates scene 1, scene1-1, scene 1-2, scene 1-3, et cetera.
I HATE HDV.

Can't start Peer Name Resolution Protocol

Similar Messages

Maybe you are looking for