Can't start up enterprise manager console again
I don't know what cause it, I can't start up enterprise manager console again after installing Oracle DS9i and hasn't any error message. Who know how to troubleshoot it, please tell me know, thank.
bash-3.00$ export
ORACLE_HOME=external1/oracle/testdb/9.2.0/
bash-3.00$ export ORACLE_SID=TEST
bash-3.00$ emctl status dbconsole
bash: emctl: command not found
I seriously doubt you ever read my previous post.
You can try the commands a thousand times on your 9i installation, it's not going to work period.
Similar Messages
-
Can't start up enterprise manager console
I don't know what cause it, I can't start up enterprise manager console again after installing Oracle DS9i and hasn't any error message. Who know how to troubleshoot it, please tell me know, thank.
Show us the output of
emctl status dbconsoleMost of the times, EM stops with DGCP being enabled on the system after the db's creation. I faced alot of it just 2 days ago when 2 of my boxes stopped EM. So show us the output of the above command and to have an idea of basic EM troubleshooting, read this,
http://oracle-base.com/articles/misc/BasicEnterpriseManagerTroubleshooting.php
HTH
Aman.... -
Can't connect to Enterprise Manager Console.
Hi..
I started the enterprise manager console via the command " @emctl start dbconsole "
when i try to connect to the web browser based app running on port 1158
(according to contents of install/portlist.ini ) I get the error
You have chosen to open em which is a: application/octet-stream from http://localhost:1158/em.
This happens on firefox. On IE i just get garbage.
>>>>>
c:\app\Ryden\product\11.1.0\db_1\bin>@emctl start dbconsole
@emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.7.0
Copyright (c) 1996, 2008 Oracle Corporation. All rights reserved.
https://dell-laptop2:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The requested service has already been started.
>>>>>
any suggestions much appreciated.
thanks!
chris
Chris Bedford
Founder & Lead Lackey
Build Lackey Labs
http://buildlackey.comShow us the output of
emctl status dbconsoleMost of the times, EM stops with DGCP being enabled on the system after the db's creation. I faced alot of it just 2 days ago when 2 of my boxes stopped EM. So show us the output of the above command and to have an idea of basic EM troubleshooting, read this,
http://oracle-base.com/articles/misc/BasicEnterpriseManagerTroubleshooting.php
HTH
Aman.... -
Starting Oracle Enterprise Management Console
I have oracle11gR2 database instance up and running on RHEL and i am able to connect to this instance using sqldeveloper. I need to have access to enterprise manager console too.
I tried to start enterprise manager using following command
[ora112@localhost ~]$ emctl start dbconsole
Environment variable ORACLE_UNQNAME not defined. Please set ORACLE_UNQNAME to database unique name.
then it tells me that ORACLE_UNQNAME is not defined.
the i set ORACLE_UNQNAME=JIP (JIP=ORACLE_SID), even after doing this , i get the same message when i try to start enterprise manager console.
could anybody help me resolve this issue
thanks in advance for any helpUnset ORACLE_SID (i.e. only set ORACLE_UNQNAME instead of ORACLE_SID), then try again. Pl also post the output of command "env | sort" just before issuing the emctl command
HTH
Srini -
How to start the enterprise Manager console in GUI based.
I am totally confuse while using oracle10g Enterprise Manager Console based. I can't able to get the administrator privileges. Even though I had the administrator privileges and password I knew. But while administrating through Enterprise Manager in 10g little bit confuse for me.
Help me .. I am here to hear a quick response as soon as possibleDBA database privilege is different from EM Administrator privilege. Check to ensure you have the right one.
-
Can't start Oracle Enterprise Manager
Hi
We installed Oracle Database 10g on Sun Solaris SPARC 64 bit.
I am trying to access Oracle Enterprise manager but cannot.
I tried to start the dbconsole but got the following error:
/external1/oracle/testdb/9.2.0/bin
./emctl start dbconsole
result was :./emctl: No such file or directory
Can you please help me solve this problem?
Regards
Quintusbash-3.00$ export
ORACLE_HOME=external1/oracle/testdb/9.2.0/
bash-3.00$ export ORACLE_SID=TEST
bash-3.00$ emctl status dbconsole
bash: emctl: command not found
I seriously doubt you ever read my previous post.
You can try the commands a thousand times on your 9i installation, it's not going to work period. -
Can't start Oracle Enterprise Manager Application Server Control:
I've install AS 10g 10.1.2 on x64 Win XP64 with the option of just Oracle J2EE and web services.
Everything installed fine but when I try to connect to the Enterprise manger server control I get :
IOException in sending Request :: Connection refused: connect
Reading the trouble shooting guide I see that maybe the Apache variable max connections needs upping. Mine was set to 150 and I upped it to 200 (and restarted)
still not joy.
can anyone help?According to metalink certification there is an issue with Win XP 64 bit for OAS 10.1.2.0.2 which is that
Only Installation Types Supported is J2EE OracleAS Developer Kit
Maybe you could consider OAS version 10.1.3.x ? -
I have recently installed the Oracle Enterprise Manager Console (Version 9.0.1.0.0) successfully, however when I click on the icon to start it, no dialog opens up!!! I have also tried manually starting the Enterprise Manager Console by typing C:\Oracle\OUIHome\bin\oemapp.bat console, but again no dialog opens up!!!
In investigating to why this is occurring I have reviewed the NT event logs where no relevant information was found, and also the directory C:\Oracle\OUIHome\sysman\log; but no files were found!
I have reviewed the Oracle Enterprise Manager Readme Release 9.0.1 Production for Win32, but this was of no use!
In the Oracle Enterprise Manager Configuration Guide Release 9.0.1 it discusses what to do if the Management Server does not start, however as said above no log files were found to exist! It also discusses changing a oemctl script, however I cannot find the oemctl script!!!
Any help to resolve this problem would be greatly appreciated. Note that I have tried un-installing and re-installing.
Thanks in advance.
David SelwoodHave un-installed and then installed again but the problem still exists!!! Can any one help?
-
Enterprise Manager Console does not start
Hi,
I'm running a Windows 2000 PC with Oracle 9i Server on it.
When I want to start the Enterprise Management Console
(Start => Program...) there is only a short reaction on
the Taskbar end when absolute nothing.
I know this problem was already mentioned once here (OEM Console does not start but
the answer there wasn't the right one for my problem.
I could not change the oracle home directory with the ORACLE-HOME-Selector, because I have only one home directory (D:\Programme\oracle\ora92)
My Path variable:
D:\Programme\oracle\ora92\bin;C:\Programme\Oracle\jre\1.3.1\bin;C:\Programme\Oracle\jre\1.1.8\bin;C:\WINNT\MS\SMS\CORE\BIN;D:\Programme\Clementine7.2\BIN;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;D:\PROGRA~1\IBM\SQLLIB\BIN;D:\PROGRA~1\IBM\SQLLIB\FUNCTION;D:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL;D:\Programme\IBM\DB2Extenders\bin;C:\Programme\Java\j2re1.4.2_02\bin
And here is my oemapp.bat(It is located in D:\Programme\oracle\ora92\bin. I have already startet it manually with "oemapp.bat console" but there was only the reply ""The input line is too long.
The syntax of the command is incorrect."
@echo off
REM #
REM # Copyright (c) 1998,1999,2000,2001, 2002 Oracle Corporation. All rights reserved.
REM #
REM # PRODUCT
REM # Oracle Enterprise Manager, Version 9.2.0.0.0 Production
REM #
REM # FILENAME
REM # oemapp.bat
REM #
REM # DESCRIPTION
REM # This script is used to launch Applications of Oracle
REM # Enterprise Manager, Version 9
REM #
REM #
if "%1%" == "recursive" goto startScript
if Windows_NT == %OS% goto :ntSetup
command.com /p /e:8196 /c oemapp recursive %1 %2 %3 %4 %5 %6 %7 %8 %9
goto :end
:ntSetup
setlocal
:startScript
IF "%1%" == "trace" GOTO trace
IF "%1%" == "TRACE" GOTO trace
IF "%1%" == "debug" GOTO trace
IF "%1%" == "DEBUG" GOTO trace
GOTO start2
:trace
SHIFT
SET ORACLE_OEM_CLIENTTRACE=TRUE
SET TRACE= -DTRACING.LEVEL=2 -DTRACING.ENABLED=true
:start2
REM Make sure that our JRE is used for this invocation.
if Windows_NT == %OS% SET PATH=C:\Programme\Oracle\jre\1.1.8\bin;%PATH%
if not Windows_NT == %OS% SET PATH="C:\Programme\Oracle\jre\1.1.8\bin;%PATH%"
SET CLASSROOT=D:\Programme\oracle\ora92/classes
SET JLIBROOT=D:\Programme\oracle\ora92/jlib
SET NETJLIBROOT=D:\Programme\oracle\ora92/network/jlib
SET OEMCLASSES=%JLIBROOT%/oembase-9_2_0.jar;%JLIBROOT%/oemtools-9_2_0.jar
SET BALICLASSES=%JLIBROOT%/swingall-1_1_1.jar;%JLIBROOT%/ewtcompat-3_3_15.jar;%JLIBROOT%/ewt3.jar;%JLIBROOT%/ewt3-nls.jar;%JLIBROOT%/share.jar;D:\Programme\oracle\ora92\sysman\jlib\master.jar;D:\Programme\oracle\ora92\sysman\jlib\master_de.jar
SET AURORACLASSES=D:\Programme\oracle\ora92/lib/aurora_client.jar
SET HELPCLASSES=%JLIBROOT%/help3.jar;%JLIBROOT%/help3-nls.jar;%JLIBROOT%/oracle_ice5.jar
SET DBUICLASSES=%JLIBROOT%/dbui2.jar;%JLIBROOT%/dbui2-nls.jar
SET KODIAKCLASSES=%JLIBROOT%/kodiak.jar
SET JDBCCLASSES=D:\Programme\oracle\ora92/jdbc/lib/classes111.zip;D:\Programme\oracle\ora92/jdbc/lib/nls_charset11.zip
SET NETCHARTSCLASS=D:\Programme\oracle\ora92/sysman/jlib/netchart360.jar
SET ORBCLASSES=D:\Programme\oracle\ora92/lib/vbjorb.jar;D:\Programme\oracle\ora92/lib/vbjapp.jar
SET SECURITYCLASSES=%JLIBROOT%/javax-ssl-1_1.jar;%JLIBROOT%/jssl-1_1.jar
SET OSDNETCLASSES=%JLIBROOT%/netcfg.jar;%JLIBROOT%/o3logon.jar;%JLIBROOT%/verifier.jar
SET OSDPKICLASSES=%JLIBROOT%/ewm-1_1.jar;%JLIBROOT%/ojpse_2_1_5.jar
SET NETMGRCLASSES=%NETJLIBROOT%/netmgrm.jar;%NETJLIBROOT%/netmgr.jar;D:\Programme\oracle\ora92/network/tools
SET XMLCLASSES=D:\Programme\oracle\ora92/lib/xmlparserv2.jar
SET OLAPCLASSES=%JLIBROOT%/cvd.zip;%JLIBROOT%/jndi.jar;%JLIBROOT%/jewt4.jar;%JLIBROOT%/jewt4-nls.jar
SET MISCCLASSES=D:\Programme\oracle\ora92/assistants/jlib/assistantsCommon.jar;D:\Programme\oracle\ora92/jlib/jle2.jar;D:\Programme\oracle\ora92/jle2-nls.jar
SET QSMACLASSES=D:\Programme\oracle\ora92/rdbms/jlib/qsma.jar
SET CLASSPATHADD=%CLASSROOT%;%OEMCLASSES%;%ORBCLASSES%;%BALICLASSES%;%HELPCLASSES%;%DBUICLASSES%;%JDBCCLASSES%;%KODIAKCLASSES%;%NETCHARTSCLASS%;%SECURITYCLASSES%;%OSDNETCLASSES%;%OSDPKICLASSES%;%NETMGRCLASSES%;%XMLCLASSES%;%AURORACLASSES%;%OLAPCLASSES%;%MISCCLASSES%;%QSMACLASSES%
REM hook for classpath additions
if not "%ORACLE_OEM_CLASSPATH%" == "" SET CLASSPATHADD=%ORACLE_OEM_CLASSPATH%;%CLASSPATHADD%
REM # Oracle change manager requires the following for ocmtclsh.exe
set GBP=
if not exist %CLASSROOT%\oracle\sysman\vtt\vttz\VttzCmDragDropObject.class set GBP=true
if "%ORACLE_OEM_JAVAMX%" == "" set ORACLE_OEM_JAVAMX=-mx128m
REM if "%ORACLE_OEM_JAVAMS%" == "" set ORACLE_OEM_JAVAMS=-ms16m
SET JRE=jrew -nojit %ORACLE_OEM_JAVAMX%
SET NT_START=START
if "%ORACLE_OEM_CLIENTTRACE%x" == "x" goto setup_cp
SET JRE=jre -nojit %ORACLE_OEM_JAVAMX% %TRACE%
SET NT_START=
:setup_cp
SET CLASSPATH_QUAL=cp
if "%ORACLE_OEM_JAVARUNTIME%x" == "x" goto jreSetup
SET JRE=%ORACLE_OEM_JAVARUNTIME%\bin\java %ORACLE_OEM_JAVAMX% %TRACE%
SET CLASSPATH_QUAL=classpath
SET CLASSPATHADD=%CLASSPATHADD%;%ORACLE_OEM_JAVARUNTIME%\lib\classes.zip
:jreSetup
SET ME=oemapp
SET USAGE="Usage: %ME% <application_name>"
if Windows_NT == %OS% goto ntCheckAppName
if not "%2%" == "" goto start95
@echo %USAGE%
goto end
:start95
if "%GBP%" == "true" goto gbp
%JRE% -DORACLE_HOME=D:\Programme\oracle\ora92 -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %2 %3 %4 %5 %6 %7 %8 %9
goto end
:gbp
%JRE% -DORACLE_HOME=D:\Programme\oracle\ora92 -DGENERAL_BUS_PACK="" -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %2 %3 %4 %5 %6 %7 %8 %9
goto end
:ntCheckAppName
if not "%1%" == "" goto startNT
@echo %USAGE%
goto end
:startNT
set ADMIN_WRL=D:\Programme\oracle\ora92\sysman\admin
set GBP_PROP=
if "%GBP%" == "true" set GBP_PROP=-DGENERAL_BUS_PACK=""
%NT_START% %JRE% -DADMIN_WRL=%ADMIN_WRL% -DORACLE_HOME=D:\Programme\oracle\ora92 %GBP_PROP% -DORBdisableLocator=true -Djdbc.backward_compatible_to_816=true %JREOPTIONS_STRING% -%CLASSPATH_QUAL% "%CLASSPATHADD%" oracle.sysman.vtx.vtxOemApp.OemApp %1 %2 %3 %4 %5 %6 %7 %8 %9
endLocal
:end
Thnaks for any help.
Nice dayMarcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim -
Hello,
I'm reading documentation about Oracle10g, and I am a little bit confused. I have understood that it hasn't the Enterprise Manager Console and that the Administration task has to be executed from the OEM Grid Control (or OEM Database Control). But now, reading the "Advanced Replication 10g Release 2" (B14226-01) doc, in the 7th chapter it explains the Replication Management Tool in Oracle Enterprise Manager Console. So the question is: can I install the Enterprise Manager Console in the clients, if I have Oracle10g (10.2.0.1) in the server?
I would really appreciate any answer, because although I have tried using the Grid Control, I can't. I'm sorry but the Console GUI is much better for me.
Thanks in advance. Regards,
AranI take it you are looking for the old-style, java-based standalone EM Console. It is still around, but probably on it's way out.
You install it from the 10.2 Client media, which you can download from here. -
Execute Enterprise Manager Console
I am running my Oracle 9.2 on Linux Red Hat 8.0. I would like to know how can I execute the Enterprise Manager Console without having to launch a terminal and type in "oemapp console"??
Is that anyway to launch the Enterprise Manager Console GUI??
Thanks!You can create a "shortcut", gnome calls them launchers, on the desktop.
Right click an empty space on the desktop, then select New Launcher from the context menu. Fill in the blanks. Now, all you need to do is click the launcer.
TTFN
John -
Ubable to start enterprise manager console via browser in Oracle 11gR2
Dear Friends
I have tried following. But i'm not able to get em console through my web browser.
here i'm posting what i have done.i have started my database listner and database ,it found working properly. So please let me know what am i missing here.
[oracle1@WBH-DB1 ~]$ echo $ORACLE_HOME
/ora11gsoft/odb/OH1
[oracle1@WBH-DB1 ~]$ echo $ORACLE_SID
wbdata
[oracle1@WBH-DB1 ~]$ echo $PATH
/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/ora11gsoft/odb/bin:/ora11gsoft/odb/OH1/jdk/bin:/ora11gsoft/odb/OH1/jdk/lib:/ora11gsoft/odb/OH1/bin
[oracle1@WBH-DB1 ~]$ hostname
WBH-DB1.wbtea.com
[oracle1@WBH-DB1 ~]$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://WBH-DB1.wbtea.com:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ..... started.
Logs are generated in directory /ora11gsoft/odb/OH1/WBH-DB1.wbtea.com_wbdata/sysman/log
i try following url in firefox web-browser
https://WBH-DB1.wbtea.com:1158/em
and i got the following error
Secure Connection Failed
xxx.xx.xx.xx:1158 uses an invalid security certificate.
The certificate is not trusted because the issuer certificate is not trusted.
The certificate is not valid for any server names.
(Error code: sec_error_untrusted_issuer)Hi,
you are not missing anything.
enterprise manager is working fine. Accept the certificate and press on continue button..
Can you try running the same in internet explorer also.
Regards
Rajesh -
Enterprise Manager Console does not start on Win 2000 Pro
I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
I have installed many times, but it is never successfull.
I was installing Enterprise Edition -> General Purpose database.
Tried the following from command prompt:
oemapp.bat I get this message : "Usage: oemapp <application_name>"
oemapp consoleI get : "bad command or file name"
oemapp console oem.loginmode=standaloneI get : "bad command or file name"
Is there any post installation configurations that need to be done?
When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
Could some one help me with this.
Thanks,
ArunaMarcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim -
Oracle Database 11gR1 Enterprise Manager Console Cannot Display in Browser
Folks,
Hello. I am running Oracle Database 11gR1 with Operaing System Oracle Linux 5. I have some issues regarding EM connects with the Database Server as below:
First, the default listener is LISTENER with standard port number 1521 and protocol TCP/IP.
Its corresponding service naming S1 is with port 1521 and protocol TCP/IP and hostname localhost.localdomain.
I run this listener in the following way:
Step 1: [user@localhost bin]./lsnrctl start LISTENER (This command runs sucessfully.)
Step 2: [user@localhost bin] ./sqlplus SYS/SYS as sysdba (This command starts sqlplus sucessfully.)
Step 3: [user@localhost sqldeveloper] ./sqldeveloper.sh (This command invokes SQL Developer sucessfully.)
But when start Enterprise Manager Console, it cannot connect with the Database. I do it in this way:
[user@localhost bin] ./emctl start dbconsole
The above command's output is:
https://localhost.localdomain:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ... ...
When open the link https://localhost.localdomain:1158/em/console/aboutApplication in browser, this message comes up:
The connection to localhost.localdomain: 1158 cannot be established.
Thus, I add Port Number 1158 into both LISTENER and Service Naming S1. I run ./emctl start dbconsole again and get this message:
The connection to localhost.localdomain:1158 was interrupted while the page was loading.
In order to solve the above issue, I create another listener LISTENER2 and another Service Naming S2 with Port Number 1158 and protocol TCP/IP because
in my point of view, each listener only can have one Port Number(1521 or 1158) and its corresponding Service Naming (S1 or S2) need to have the same Port Number and Protocol (TCP/IP).
But when I run [user@localhost bin]./lsnrctl start LISTENER2, this message comes up: the listener supports no service.
From the message, it seems that LISTENER2 cannot work with its corresponding Service Naming S2 with Port 1158.
EM with Port 1158 cannot display in Browser.
My questions are :
First, Is there any relationship needed to be established between listener(LISTENER2) and Service Naming(S2) in order to display EM in Browser ?
Second, how do folks display EM in browser ?
Thanks.Folks,
Hello. Thanks a lot for replying. I do the following command: [user@localhost bin]$ wget http://localhost.localdomain:1158/em
The command returns the message:
--11:36:33-- http://localhost.localdomain:1158/em
Resolving localhost.localdomain... 127.0.0.1
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em'
[ <=> ] 7 --.-K/s in 0.002s
11:36:33 (4.15 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
--11:36:34-- (try: 2) http://localhost.localdomain:1158/em
Connecting to localhost.localdomain|127.0.0.1|:1158... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `em.1'
100%[=================================================================================================================>] 7 --.-K/s in 0s
11:36:34 (16.8 KB/s) - Read error at byte 7 (Connection reset by peer).Retrying.
The above message repeats again and again until finally returns the following message:
11:39:02 (40.2 KB/s) - Read error at byte 7 (Connection reset by peer).Giving up.
In browser, http://localhost.localdomain:1158/em cannot display and pop up a Windows with the message: You have chosen to open whicn is BIN file from http://localhost.localdomain:1158 What sholud FireFox do with this file ? Save to Disk ?
My question is:
I don't know how to display http://localhost.localdomain:1158/em in Browser. How to solve the issue ?
Thanks. -
Stopping the Enterprise Manager Console (Oracle 10g on SuSE 9.1)
I'm trying to stop the Enterprise Manager Console by issuing the command:
${ORACLE_HOME}/bin/emctl stop dbconsole
Unfortunately, the command fails to stop the EM Console. Here's the output I get:
TZ set to US/Pacific
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://<hostname>:5505/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
The only way I can stop the EM Console (and related services--i.e., emagent) is to kill its process.
Everything (Listener, DB Instance, EM Console) starts fine. I can stop the Listener and DB Instance without any problems. It's just the EM Console shutdown that doesn't happen cleanly.
Has anyone else encountered the same condition? If so, what was the solution?
Here's my operating environment:
SuSE 9.1 (Kernel 2.6.5-7.108-default)
Oracle 10g
Thanks in advance for any help/insight.Has anyone else encountered the same condition? If so, what was the solution?Yes. Shutdown/reboot of the system made the error go away.
Sorry, no better clues,
Toni
Maybe you are looking for
-
Asking for help with purchase of Macbook Pro
Hi all, I am looking to buy a 15" Macbook Pro for my 15-year old daughter. The configuration I have found is: 2.4GHz Intel Core i7 Quad-Core 4GB of DDR3 RAM 750GB 5400rpm Hard Drive AMD Radeon HD 6770M 1GB Graphics 15.4" LED-Backlit Glossy Display 1
-
3d Surface plot in 2013 - Z axis range input or property node doesn't get updated on the graph
I point the problem to the ( 3D_Plot.lvclass.graph Update.vi). Can someone confirm this?
-
iTunes won't open because iTunes library.itl was created by a newer version of iTunes. How can I convert my library to an older version?
-
Read and write(control should act as indicator and viceversa)
control(input) should act as indicator(output) and viceversa for a string transmission.is it possible kudos welcome Solved! Go to Solution.
-
Recreate or Rebuild a new iTunes database
I have found several people need help recreating or rebuilding their databases. This is NOT the same thing as recreating a music library, this is a deeper issue. I discovered that by tricking iTunes into thinking you are starting it for the first tim