Can't write in input field in my webmail
I use webmail (Netfirms). Things were fine until Firefox wanted to use certain fonts, to which I declined. Now, when I need to email someome through this webmail account, I can't type in the input field. When I tab down through the CC BCc etc. it ends up going up to the address bar.
== After Firefox wanted to install fonts I don't have
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
Similar Messages
-
How can we change the input field on a view stop showing zeros
Hello,
To make screen look consistent with other character input field. How can we change the input field on the view stop displaying zeros even though the data type is NUMC and data type should not be change?
Edited by: sap_learner on Mar 25, 2010 5:44 PM
Edited by: sap_learner on Mar 25, 2010 5:49 PM
Edited by: sap_learner on Mar 25, 2010 5:55 PMhello Manas Dua,
Thanks for your help. I am able to resolve my problem.
My code will help the future comers to resolve this kind of issues.
*The code is applied to method WDDOINIT of the default view.
DATA lo_nd_terms_input TYPE REF TO if_wd_context_node.
DATA lo_nd_terms_input_i TYPE REF TO if_wd_context_node_info.
DATA lv_zeros TYPE wdy_attribute_format_prop.
lv_zeros-null_as_blank = 'X'.
lo_nd_terms_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
lo_nd_terms_input_i = lo_nd_terms_input->get_node_info( ).
lo_nd_terms_input_i->set_attribute_format_props(
EXPORTING
name = `ENTER THE ATTRIBUTE NAME`
format_properties = lv_zeros ).
Edited by: sap_learner on Mar 26, 2010 5:02 PM -
Can i write in to field of system matrix??
can i write in to field of system matrix??
Yes, that is possible, but only using the UI (not the datasource) and only if the field is visible and editable (if a user could write to it so could you)...
A small sample on how to do it (C#):
((EditText)oMatrix.Columns.Item("coluid").Cells.Item(<rowNumber>).Specific).Value = "my value"
Be aware though... Updating data this way can be quite slow... -
What is the idea of having STRING type when you can't write into that field
Hello friends
I am desperately trying to write to a field of a database table with DATA TYPE 'STRING'.
When I try to write it using a program from < SE38> or a function <SE37>, I get following error message, while activating the program.
============================================================
<DATABASE_TABLE> must be a flat structure. You cannot use internal tables,
strings, references, or structures as components.
============================================================
So, I have been going in circle to find out how to write a string into this field.
I can't use the CHAR or any such type with a limited field length, since the requirement from my customer is to use a variable length string.
Has anybody seen this problem before and if you have resolved this issue, I would appreciate if you can please let me know.
Thanks a lot in advance.
RamHi Harish
Thanks for your response.
I can create the table with the data type 'String'. However, the problem is when I try to update the table from a program in SE38 or a Function Module in SE37.
When I try to activate the PROGRAM or FUCNTION, I GET A MESSAGE THAT I MENTIONED EARLIER.
Here is the simple program that I have created that I am not able to activate
==========================================
REPORT ZTEST_STRING1.
tables: ztest.
ztest-zid = 2.
ztest-zstring1 = 'ABC'.
insert ztest.
===========================================
ztest has two fields
zid which is NUMC type
and zstring1 which is STRING type.
When I try to activate I get an error message as follows:
'ztest' must be a flat structure. You cannot use internal tables,
strings, references, or structures as components.
Edited by: Ram Prasad on Mar 20, 2008 6:08 PM -
I can't see the input field/tab
I'm learning to work with Java, and i've downloaded and installed JDeveloper 10.1.3.2
I'm trying to run a simple program that accepts user input using the java.util.Scanner class.
The program compiles without errors or warnings, but when run, it prompts the user for input but JDeveloper doesn't display the input field at the bottom of the messages window.
PS: The same program runs in Netbeans 5.0 without any errors, and displays the input field.
Please how do I fix this problem.Sorry.... typed too quickly...
Double-click project to bring up project properties
Click Run/Debug in the left pane, click "Edit" in the right pane to edit the config
Click on "tool settings" in the left pane, then select the "Allow Program Input" in the middle pane.
Hope this helps -
How can we make one view field value to be copied to other field of the the
Hi
I am new in CRM2007 I have enhanced sap component & enhanced SAP View but I wanted the field value of the enhanced view to be mapped to the field value of the same view which is added from EEWB
Pls tell me if the added new field can be made as Dropdown list box without fixed values & Design Layer customizing I mean to say through coding can we made the input field as Dropdown
Appreciate any help in advance
Thanks
NeelHi,
You can write your own ligic in GET_V_<FIELD> method. Select the values which needs to be displayed in the drop down list based on your own condition. Some sample code is given below:
METHOD get_v_zzverksomr.
DATA: lt_ddlb TYPE bsp_wd_dropdown_table,
ls_ddlb TYPE bsp_wd_dropdown_line,
lv_display_only TYPE string,
gr_ddlb_verksomr type ref to CL_CRM_UIU_DDLB,
ls_verksomr_values TYPE LINE OF vrm_values.
SELECT verksomr verksomrtxt FROM zkb_verks
INTO TABLE lt_ddlb.
IF sy-subrc EQ 0.
INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
ENDIF.
IF gr_ddlb_verksomr IS NOT BOUND.
FREE gr_ddlb_verksomr.
CREATE OBJECT gr_ddlb_verksomr
EXPORTING
iv_source_type = 'T'.
LOOP AT gt_verksomr_values INTO ls_verksomr_values.
ls_ddlb-key = ls_verksomr_values-key.
ls_ddlb-value = ls_verksomr_values-text.
APPEND ls_ddlb TO lt_ddlb.
ENDLOOP.
gr_ddlb_verksomr->set_selection_table( it_selection_table = lt_ddlb ).
ENDIF.
rv_valuehelp_descriptor = gr_ddlb_verksomr.
ENDMETHOD.
Thanks
Swagatika -
Choose an entry in Search help and not in its input field
Hi to all,
In my application I have a field with a search help.
I want that this field only can be modified using a search help and this field can't be modified directly writing in this field.
Is similar to transaction se63 - Translation - Abap objects - Short texts - OTR - Source language
I have created an example with the field SCARR-CARRID but this field can be modified with search help and directly, or this field can't be modified.
In my application I have done the following:
-> Screen painter (layout):
Name: SCARR-CARRID
Input Field: not marked
Output Field: marked
Possible entries: marked
Possible entries keys: 2
-> Flow logic:
PROCESS BEFORE OUTPUT.
MODULE IMPORT_DATA_0001.
PROCESS AFTER INPUT.
MODULE EXPORT_DATA_0001.
PROCESS ON VALUE-REQUEST.
FIELD SCARR-CARRID MODULE listbox.
PROCESS ON HELP-REQUEST.
MODULE listbox INPUT.
TYPES:
BEGIN OF VRM_VALUE,
KEY(40) TYPE C,
TEXT(80) TYPE C,
END OF VRM_VALUE,
VRM_VALUES TYPE VRM_VALUE OCCURS 0,
VRM_ID TYPE VRM_VALUE-TEXT,
VRM_IDS TYPE VRM_ID OCCURS 0.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
CHECK list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid CARRNAME FROM SCARR
INTO (value-key,value-text).
APPEND value TO list.
ENDSELECT.
SORT list BY text.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
ENDMODULE. " LISTBOX INPUT
How can i solve this problem?
Thanks a lot.Hi Jey:
I have tried this:
MODULE listbox INPUT.
TYPES: BEGIN OF vrm_value,
key(40) TYPE c,
text(80) TYPE c,
END OF vrm_value,
vrm_values TYPE TABLE OF vrm_value,
vrm_id TYPE vrm_value-text,
vrm_ids TYPE TABLE OF vrm_id.
DATA: name TYPE vrm_id,
list TYPE TABLE OF vrm_value WITH HEADER LINE,
poplist TYPE TABLE OF spopli WITH HEADER LINE,
popanswer TYPE c,
popindex TYPE i,
value TYPE vrm_value,
lt_dyntab TYPE TABLE OF dynpread WITH HEADER LINE,
dynpprog TYPE syrepid VALUE 'SAPMZxxxx', "Enter your dynpro here
dynpnr TYPE sydynnr VALUE '0100', "Enter your screen number here
dynpfield TYPE help_info-dynprofld VALUE 'SCARR-CARRID'.
IF list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid carrname FROM scarr
INTO (value-key,value-text).
APPEND value TO list.
poplist-varoption = value-text.
APPEND poplist.
ENDSELECT.
ENDIF.
Use some method to display a list for selection
Here is a simplified way of doing it but there are
much more sofisiticated methods.
CALL FUNCTION 'POPUP_TO_DECIDE_LIST'
EXPORTING
textline1 = 'Select an entry'
titel = 'Selection'
IMPORTING
answer = popanswer
TABLES
t_spopli = poplist
EXCEPTIONS
not_enough_answers = 1
too_much_answers = 2
too_much_marks = 3
OTHERS = 4.
CHECK sy-subrc = 0.
CHECK popanswer NE 'A'.
popindex = popanswer.
READ TABLE list INDEX popindex.
IF sy-subrc = 0.
lt_dyntab-fieldvalue = list-key.
ENDIF.
Update the screen field with the selected value
lt_dyntab-fieldname = dynpfield.
APPEND lt_dyntab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = dynpprog
dynumb = dynpnr
TABLES
dynpfields = lt_dyntab
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDMODULE. " LISTBOX INPUT
I think that there is a error that I have not seen because I put a breakpoint at the beginning of your code and the execution doesn`t stop.
Now I execute the dynpro and appears my field 'SCARR-CARRID' and I can't choose a value and I can write in input field.
Can you help me?
Thanks a lot. -
Make Input field readonly at run time.
Hi,
I have a input field on a view , i want to make it <b>readonly</b> during run time depending on some value.
plz help. reward point is sure.Hello Manoj
You can also make the input field readOnly dynamically during run time. For this you need to write a simple code in wdDoModifyView of your view controller. Code is as follows
IWDInputField inputField = (IWDInputField)view.getElement("<id of inputfield>");
if(<reqd condition>)
inputField.setEnabled(false);
else
inputField.setEnabled(false);
Try this, if things donot get much complicated on doing this. I hope it helps u and makes thing simple.
Regards
Kapil -
Hiding a input field in the F4 help...?
hi,
How can we hide a input field(selection criteria) in the F4 help.
Eg- if we use standard serch help KRED_C for the field lifnr. i want to hide 'Name' from the filter criteria??
ThanksHi Pavan,
It's a reccurring question in BSP forum that cannot be solved that easily...
You will find some examples of how it can be handled in demo BSP :
<b>bsp_valuehelp</b>
<b>bsp_vhelp</b> (this one is MVC-oriented)
To go further, you should have a look at the following blog :
/people/thomas.jung3/blog/2004/09/17/bsp-150-a-developer146s-journal-part-xii-150-value-input-help-popups
/people/thomas.jung3/blog/2004/11/01/bsp-value-input-help-popups-version-20-part-1
Hope it helps.
Best regards,
Guillaume -
Dynamic enabling of input fields via radio btn in report selection screen?
Hi there!
I was wondering whether one can dynamically enable/disable input fields on a selection screen of a report-program.
Or is this only possible for selection screens in dynpro-programs?
If possible for reports - could you give an example?
Thanx a lot.
AndreasHi,
yes..You can dynamically disable and enable inputs fields in the selection screen..
Check this ex..If you press the first radio button..The second input will be disabled...And vice versa..
PARAMETERS: p_r1 RADIOBUTTON GROUP g1 USER-COMMAND usr DEFAULT 'X',
p_r2 RADIOBUTTON GROUP g1.
PARAMETERS: p_input1 TYPE matnr MODIF ID m1,
p_input2 TYPE matnr MODIF ID m2.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_r1 = 'X'.
IF screen-group1 = 'M2'.
screen-input = '0'.
ENDIF.
ELSE.
IF screen-group1 = 'M1'.
screen-input = '0'.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Thanks,
Naren -
How to display zero in the screen's input field using numc type
Hi,
I want to display the zero value in the input field , when I using the NUMC input field on the screen .
The zero will be changed to blank ,when I click the Enter key.
What I should do for it?
Any help is appreciated.
Regards,
TrevorHi ,
Thanks for your quickly answer!
I use the numc input field in the dialog's screen.
I am not sure how to do the realize the function like 'UNPACK'?
In fact, I can't changed my input field's data type.
When the status of my input field is display, I can display the zero on the screen. But when the input field is input status , there is blank!
Regards
Trevor -
Input field validation using JSP in HTMLB
Hi All,
How can we validate an input field in a form in BSP page.
Like: There are two input fields in my form.I want the user to enter value in any one and only one of the fields.If the value is entered in both fields or none of the fields the user should get a popup and form must not be submited.
Shall i use the onClientClick attribute of Button element or doValidate attribute of Inputfield element or validationScript attribute of From element?
Please help.
Thanks a lot,
Anubhav.Here you go:
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title=" " >
<htmlb:form id="form1" >
< script t-ype = "text/javascript" > "Remove "-" between t & ype in type
function checkInput()
var field1 = document.form1.field1.value;
var field2 = document.form1.field2.value;
var error = "";
if(field1 != "" && field2 != "")
{ error = "X";
javascript error message here }
if(field1 == "" && field2 == "")
{ error = "X";
javascript error message here
if(error == "")
htmlbSL(this,2,'mybutton:Submit');
< / script >
<htmlb:textView text = "Hello World!"
textColor = "RED"
design = "HEADER1"
align = "CENTER" />
<htmlb:inputField id = "field1"
value = "<%= var1 %>"
type = "integer"
alignment = "CENTER" />
<htmlb:inputField id = "field2"
value = "<%= var2 %>"
type = "integer"
alignment = "CENTER" />
<htmlb:button id = "mybutton"
text = "Press Me"
onClientClick = "javascript:checkInput();" />
</htmlb:form>
</htmlb:page>
</htmlb:content>
Raja T
Message was edited by:
Raja Thangamani -
How i can show the selection screen input field in the top of page in alv
hi ,
how i can show the selection screen input field in the top of page in alv grid output.
tell me the processHi,
excample from my program:
FORM topof_page.
DATA: l_it_header TYPE TABLE OF slis_listheader WITH HEADER LINE,
l_info LIKE l_it_header-info.
DATA: l_it_textpool TYPE TABLE OF textpool WITH HEADER LINE.
DATA: l_key LIKE l_it_textpool-key.
READ TEXTPOOL c_repid INTO l_it_textpool LANGUAGE sy-langu.
DEFINE m_selinfo.
if not &1 is initial.
clear l_it_header.
l_it_header-typ = 'S'.
l_key = '&1'.
translate l_key to upper case.
read table l_it_textpool with key key = l_key.
if sy-subrc = 0.
shift l_it_textpool-entry left deleting leading space.
l_it_header-key = l_it_textpool-entry .
endif.
loop at &1.
case &1-option.
when 'EQ'
or 'BT'
or 'CP'.
write &1-low to l_it_header-info.
when others.
write &1-low to l_it_header-info.
concatenate &1-option
l_it_header-info
into l_it_header-info
separated by space.
endcase.
if not &1-high is initial.
write &1-high to l_info left-justified.
concatenate l_it_header-info
l_info
into l_it_header-info
separated by space.
endif.
if &1-sign = 'E'.
concatenate ']'
l_it_header-info
into l_it_header-info.
endif.
append l_it_header.
clear: l_it_header-key,
l_it_header-info.
endloop.
endif.
END-OF-DEFINITION.
m_selinfo: s_trmdat,
s_trmext,
s_trmint,
s_fkdat,
s_delno,
s_vbeln,
s_deact,
s_kdmat.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = l_it_header[].
ENDFORM.
I hope, this will help you.
Regards
Nicole -
How can I create a Text-Input Field in BexAnalyzer for a Planning Function
Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advanceHi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor -
Can we Change the backround color of an Input field in Webdynpro for ABAP.
Hi Experts ?
Can we change the background color of an Input field in WebDynpro for ABAP based on results we receive from any function module or BAPI?? .
Thanks in advance .
Regards ,
LASYes. We can change the background of an input field. The way you do this is by editing the theme that webdynpro application uses. To edit the theme, you will need to install NWDS PLUS the theme edit plugin (Available for download from SAP).
Once you have edited the theme, you will need to upload your theme back to application server. You can use the program : BSP_UPDATE_MIMEREPOS to do this.
Bydefault, the theme used by webdynpro applications is :
/SAP/PUBLIC/BC/UR/nw5/themes/sap_tradeshow
You can apply another theme by calling the webdynpro application with a theme parameter. For example, if my webdynpro application name is "zgopaltest", then
<i><b>http://<server>:port/sap/bc/webdynpro/sap/zgopaltest?SAP-EP-THEMEROOT=/SAP/PUBLIC/BC/UR/nw5/themes/sap_tradeshow</b></i>
will apply the sap_tradeshow theme.
Likewise, you can apply diffrent theme. There is another theme that SAP provides. Its called : sap_hcb. Hence, you can apply the theme to the above application by:
<i><b>http://<server>:port/sap/bc/webdynpro/sap/zgopaltest?SAP-EP-THEMEROOT=/SAP/PUBLIC/BC/UR/nw5/themes/sap_hcb</b></i>
Maybe you are looking for
-
Hi All, I am considering a change of job. Here is a brief of my experience. I am an engineering graduate with 5 years of experience in LabView, Data aquasition and control systems, automated test equipment. I have also executed few testing projects a
-
HOW TO KNOW THE TCODE FOR CREATING A NEW ENTRY IN A PARTICULAR TABLE
HI, CAN YOU PLEASE LET ME KNOW THE PROCEDURE TO GET THE TCODE FOR CREATING A NEW ENTITY IN A TABLE . EG: IS THERE ANY PROCEDURE TO KNOW THAT IF I CREATE A NEW ENTITY IN MM01 IT WILL BE STORED IN TABLE MARA. THANKING YOU.
-
When I download a file, I used to get an option to "save as", instead of just save. If I download a file I like to immediately download it into the appropriate folder on my desktop (not just one folder.) Instead I have to download it, go into the dow
-
Can'tInstall tiger on G4 quick silver
When I put the Tiger full version in cs/dvd drive to install 10.4 over 10.3.9, the drive spits out the disc without out ever mounting it., When I try a work around, it says can't install on this Mac but I have enough memory, 533 speed on G4 quick Sil
-
My tool bar disappeared and I can't get it back!
I followed the instructions to go to customize and click on tool bar at the bottom of the page, but there IS NO toolbar at the bottom of the page. What now?