Choose an entry in Search help and not in its input field
Hi to all,
In my application I have a field with a search help.
I want that this field only can be modified using a search help and this field can't be modified directly writing in this field.
Is similar to transaction se63 - Translation - Abap objects - Short texts - OTR - Source language
I have created an example with the field SCARR-CARRID but this field can be modified with search help and directly, or this field can't be modified.
In my application I have done the following:
-> Screen painter (layout):
Name: SCARR-CARRID
Input Field: not marked
Output Field: marked
Possible entries: marked
Possible entries keys: 2
-> Flow logic:
PROCESS BEFORE OUTPUT.
MODULE IMPORT_DATA_0001.
PROCESS AFTER INPUT.
MODULE EXPORT_DATA_0001.
PROCESS ON VALUE-REQUEST.
FIELD SCARR-CARRID MODULE listbox.
PROCESS ON HELP-REQUEST.
MODULE listbox INPUT.
TYPES:
BEGIN OF VRM_VALUE,
KEY(40) TYPE C,
TEXT(80) TYPE C,
END OF VRM_VALUE,
VRM_VALUES TYPE VRM_VALUE OCCURS 0,
VRM_ID TYPE VRM_VALUE-TEXT,
VRM_IDS TYPE VRM_ID OCCURS 0.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
CHECK list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid CARRNAME FROM SCARR
INTO (value-key,value-text).
APPEND value TO list.
ENDSELECT.
SORT list BY text.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = name
values = list.
ENDMODULE. " LISTBOX INPUT
How can i solve this problem?
Thanks a lot.
Hi Jey:
I have tried this:
MODULE listbox INPUT.
TYPES: BEGIN OF vrm_value,
key(40) TYPE c,
text(80) TYPE c,
END OF vrm_value,
vrm_values TYPE TABLE OF vrm_value,
vrm_id TYPE vrm_value-text,
vrm_ids TYPE TABLE OF vrm_id.
DATA: name TYPE vrm_id,
list TYPE TABLE OF vrm_value WITH HEADER LINE,
poplist TYPE TABLE OF spopli WITH HEADER LINE,
popanswer TYPE c,
popindex TYPE i,
value TYPE vrm_value,
lt_dyntab TYPE TABLE OF dynpread WITH HEADER LINE,
dynpprog TYPE syrepid VALUE 'SAPMZxxxx', "Enter your dynpro here
dynpnr TYPE sydynnr VALUE '0100', "Enter your screen number here
dynpfield TYPE help_info-dynprofld VALUE 'SCARR-CARRID'.
IF list[] IS INITIAL.
name = 'SCARR-CARRID'.
SELECT carrid carrname FROM scarr
INTO (value-key,value-text).
APPEND value TO list.
poplist-varoption = value-text.
APPEND poplist.
ENDSELECT.
ENDIF.
Use some method to display a list for selection
Here is a simplified way of doing it but there are
much more sofisiticated methods.
CALL FUNCTION 'POPUP_TO_DECIDE_LIST'
EXPORTING
textline1 = 'Select an entry'
titel = 'Selection'
IMPORTING
answer = popanswer
TABLES
t_spopli = poplist
EXCEPTIONS
not_enough_answers = 1
too_much_answers = 2
too_much_marks = 3
OTHERS = 4.
CHECK sy-subrc = 0.
CHECK popanswer NE 'A'.
popindex = popanswer.
READ TABLE list INDEX popindex.
IF sy-subrc = 0.
lt_dyntab-fieldvalue = list-key.
ENDIF.
Update the screen field with the selected value
lt_dyntab-fieldname = dynpfield.
APPEND lt_dyntab.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = dynpprog
dynumb = dynpnr
TABLES
dynpfields = lt_dyntab
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDMODULE. " LISTBOX INPUT
I think that there is a error that I have not seen because I put a breakpoint at the beginning of your code and the execution doesn`t stop.
Now I execute the dynpro and appears my field 'SCARR-CARRID' and I can't choose a value and I can write in input field.
Can you help me?
Thanks a lot.
Similar Messages
-
Search help unavailable in Read-only input field since EHP4
Dear Experts!
I have a problem with a Portal page since the deploy of the EHP4. The page has standard input fields with Search Helps. I needed to have the input field non-modifiable so the user would have to use the search help to get the proper information.
Prior to the EHP4 installation, I set the input field to Read Only in the WebDynpro explorer, this disabled the editing while permitting the user to use the Search Help.
Since the installation, the search help is no longer visible or accessible on a Read Only standard inputfield.
Do you know if there is a way to allow the search help on a read only field?
Thanks so much for your answer,
Brian Foster.>Since the installation, the search help is no longer visible or accessible on a Read Only standard inputfield.
This was a conscious design decision on SAP's part that disabled or read-only fields should no longer fire value help. I am aware that this situation was used in the past as you describe. It is even still used in SE80 for the Web Dynpro ABAP wizards. However usability studies showed that this often confused end users and therefore it is no longer allowed. The field must be input enabled to fire the attached serach help. -
The installed software is:
Mozilla Firefox 3.6.8
Firefox WEB.DE Edition
WEB.DE updateIf you download a version of Firefox from some site other than the official Mozilla site, then you accept their terms and conditions and you agree to use the product with any changes that they made to the product.
'''Official Firefox download sites''':
*https://www.mozilla.com/en-US/firefox/personal.html
*http://www.mozilla.com/en-US/firefox/all.html -
A question about search help and input help,PLZ take a look at it.
hi everyone,
i want to know the difference between search hlep and inpu help
can anyone tell me about that?
thanksHI
BOTH ARE SAME
you can define F4 help in 2 ways
in SE11 or in the report program
IN SE11
Attaching a search help to a table field
Choose the field name, click on search help tab and
provide the name of the search help.
A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
Attach the search help to the table field
The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
Attaching a search help to a data element
Provide the search help name and the parameter name
under the further characteristics tab of the data element.
If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
Also note that the input F4 help would be available wherever the data element is used.
Attaching a search help to a screen element
A search help can be directly assigned to a screen field in two ways.
The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
However, input help is only available for this particular screen.
in REPORT PROGRAM
in this way we declare in report program
TYPES : BEGIN OF ST_OBJID_SH,
OTYPE TYPE HRP1000-OTYPE,
OBJID TYPE HRP1000-OBJID,
END OF ST_OBJID_SH.
DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
*SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
IF S_OBJID IS NOT INITIAL.
SELECT OTYPE OBJID FROM HRP1000
INTO TABLE IT_OBJID_SH
WHERE OTYPE = 'D'.
IF SY-SUBRC EQ 0.
SEARCH HELP FOR QUALIFICATION.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'OBJID'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'S_OBJID'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_OBJID_SH
FIELD_TAB =
RETURN_TAB = RETURN_TAB
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
Check this out
http://www.sap-img.com/abap/value-request-for-parameter.htm
******************************8
sample program
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
one more program....
REPORT ZHELP .
TABLES : MARA.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_MATNR(10) TYPE C.
SELECTION-SCREEN END OF BLOCK B1.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR TYPE MATNR,
END OF ITAB.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_MATNR.
SELECT MATNR
FROM MARA
INTO TABLE ITAB
UP TO 10 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'MATERIAL NUMBER'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_MATNR'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = ITAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
Create it from SE11.
enter search help
and create elementary
enter description and below Table name
and the fields
see the doc
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm -
Search help and Match code oject
How to create the search help in version 5.0 and 6.0 ? what is elementary search help,collective search help? what is the use of these search helps? where we use elementary and collective searsc helps? what is the difference between searc help and match code object? how to use in reports?where we use search help and F4IF_INT_TABLE_VALUE_REQUEST function module? what is the diffference between them?
Hi Rk,
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Thanks,
Reward If Helpful. -
Difference between Search Helps and Match Codes?
Difference between Search Helps and Match Codes?
Serch help
Search Helps
The input help (F4 help) is a standard function of the R/3 System. The user can display the list of all possible input values for a screen field with the input help. The possible input values can be enhanced with further information. This is meaningful especially when the field requires the input of a formal key.
Standard Input Help Process
A user calls an input help with the following steps (some steps can be omitted, depending on the definition of the input help):
The user starts the input help to display the possible input values for a field (search field) in a screen template.
The system offers the user a number of possible search paths. The user selects one of these search paths. Each search path offers a number of restrictions to limit the number of possible input values. These values are offered in a Dialog box for value restriction when the search path is selected.
The user enters restrictions if required and then starts the search.
The system determines the values that satisfy the entered restrictions (hits) and displays them as a list (hit list).
The user selects the most suitable line from the hit list by double-clicking.
The value of the search field is returned to the screen template (possibly together with other values).
Steps 2 and 3 are omitted if there is only a single search path available. In this case the dialog box for the value selection is offered immediately. You can also output the hit list directly after starting the input help. Steps 2 to 4 are omitted in this case.
Function of a Search Help
This standard process can be completely defined by creating a search help in the ABAP Dictionary. This search help only has to be assigned to the screen fields in which they should be available (see Attaching Search Helps to Screen Fields).
There are two types of search help:
Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
See also:
Example for Search Helps
Creating Elementary Search Helps
Creating Collective Search Helps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Match code
Match code is nothing but the Search help in Higher versions
It is same way from SE11 you have to create.
so from SE11 create it and use it.
Matchcode objects are being replaced by search helps. This is good as search helps are easy to create. However, it has caused some confusion on how best to add search helps to a selection field.
The trick that I found is to keep your newly created search helps to a 4-character name. The Matchcode object name has this old 4-character limit. This trick is not documented anywhere in the system but it has been a great time saver for me. You can expand this concept by finding existing SAP search helps that are more than 4-characters, copy them to a 4-character name and presto, you have a new matchcode object available for use
Check this thread to get detailed info
Match Code Objects
Match code
match code
match code
Match code
http://help.sap.com/saphelp_40b/helpdata/en/cf/21ef46446011d189700000e8322d00/content.htm
Rewards if useful.................
Minal
http://web.mit.edu/sapr3/docs/webdocs/dontindex/pdf/mcqc.pdf -
Search help problem in ALV output for field TD24A-DISMM
Hi Abap-Experts,
I have one issue regarding simple ALV report.
I need to display search-help for field DISMM. I have used below code in ALV fieldcatalog.
ts_fieldcat - tabname = 'TD24A'.
ts_fieldcat - tabname = 'DISMM'.
I have attached search-help for fields such as MATNR and WERKS too.
The search-helps are getting displayed for MATNR as well as WERKS.
But, the search-help is not gettting displayed for field DISMM(RP-TYPE) .
The output displayed is done using Simple ALV.
Could anyone please help me and correct my code or logic i have used.Hi,
I have changed code a bit...and used T438A table.
CLEAR ts_fieldcat.
ts_fieldcat-col_pos = '5'.
ts_fieldcat-fieldname = 'DISMM'.
ts_fieldcat-seltext_l = text-014.
ts_fieldcat-outputlen = 2.
ts_fieldcat-reptext_ddic = ''.
ts_fieldcat-ref_tabname = 'T438A'.
ts_fieldcat-ref_fieldname = 'DISMM'.
ts_fieldcat-ddic_outputlen = '2'.
ts_fieldcat-input = 'X'.
APPEND ts_fieldcat TO gt_fieldcat.
still it is not showing me the F4 help in simplae ALV output..
kindly help me -
Note 1681589: Missing entry in search help of RPUTMSE0 report
Hola Buena tardes,
Estamos aplicando la Note 1681589: Missing entry in search help of RPUTMSE0 report; En la version 4.7 hace referencia a un valor que no existe.
Table: T52B5
TMS1 RPUTMSE004 TOA C111E0
Puede ser que el valor correcto es: sobra un número "1"
Table: T52B5
TMS1 RPUTMSE004 TOA C11E0
Saludos,
JorogapeHola,
En la vista V_T52B4 la encuentro como:
TOA C111E0 Modelo 111 - Impuesto sobre la renta PF
Saludos,
Carlos. -
With input disabled field search help is not working.
Hi Web dynpro abap Gurus
Please help me on below requirement.
If i make a input field disable then the attach search help is not working. Is there is any way by which
I can make input field disabled and search help will also work for this field.
I really need help on this, Please help me.
Many thanks in advance.
Sandeep Sharma
09971995045Hi
I dont think that a field can be disabled and allows to choose data using f4 simultaneously. you can enable the field and allow the user to select whatever he/she wants.
Then in any action like on press of save or submit button which the user will trigger after entering the values, get the value entered by the user in that perticular field and fire a query on the table/view, which you have used as selection method of your search help, it help is coming from data element then look for check table in domain. if sy-subrc comes 0 than go ahead else give error that value selected is modified.
Thanks
Vishal -
Search help does not work when view context is mapped to comp context
Hello,
I am trying to display search help for an input field of a view. The context to which the input field is bound is a node with an attribute. I have specified Dictionary Search help for the attribute. Now when I execute the application, I am able to get the search help in the screen.
But, I need to map this view context node to its comp controller context. When I do the mapping, the search help does not appear when executed.
It would be a great help if someone can point out an answer to this.
Thanks,
MayaHi Maya
Follow these steps:
1.Delete the context node/attribute which is bound to search help from the View.
2.Now Save metadata.
3.Perform Context mapping again .In the Edit Context Mapping window drag the node/attribute FROM RIGHT PANE TO LEFT PANE and select the entry.
4.Delete the Input Field from the view.
5.Save again
6.Close NWDS and reopen it.
7.Create input field again and bind it to the context element.
Hope this solves the problem.
Regards
Ananda -
Search help is not triggering second time in interactive form
Hi,
I have online interactive form in WDABAP. And I have few search helps in the form, If i click on any search help it is opening and I can select the value and the same is populated to the field. But if i click it again search help is not opening.
Only one time it is triggering and also after I clicked one serach help, other search helps also dont work.
Can some one guide me? Is it something to do with scripting or any other configuration?
Now Im using ALD7.1 and Reader version is 8.1.0.
did any one faced this problem? Really appreciate if some one can help me on this.
Regards,
Ravihi,
The following code is generated in the preopen event of the valuehelp.
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 710.20061129084151.349066.349066 - ValueHelpDropDown.xfo
var processingValueHelp = ContainerFoundation_JS.getGlobalValue(event.target, "processingValueHelp");
if(processingValueHelp == false) {
ContainerFoundation_JS.setGlobalValue(event.target, "processingValueHelp", true);
this.rawValue = "";
this.clearItems();
ContainerFoundation_JS.SendMessageToContainer(event.target,
"valueHelp",
this.dataNode.somExpression.replace(/(xfa.?\.)(datasets.?\.)(data.*?\.)/, ""),
this.rawValue,
event.target.mouseX,
event.target.mouseY);
// END OF DO NOT MODIFY
I have tried placing this code in click event instead of preopen.But still no use. Can we make changes to this code? Can some one give me some idea what changes need to be done..
Regards,
Ravi -
1. How can we search the Forum to see if a question has already been asked? Search goes back to Help and out of the Forum.
2. Can I send a Web Page and not just its Link? Explorer allows it.1. How can we search the Forum to see if a question has already been asked? Search goes back to Help and out of the Forum.
2. Can I send a Web Page and not just its Link? Explorer allows it. -
Ship to party search help address not display
Hi,
Using 'Edit internal address' We added one plant address, and the address no also generated. plant having several address.
But when we creating shopping cart, trying to select the ship to address from the search help, address not displaying in the list.
even we tried adding this address in the attributes as delivary address also .but the address not displaying in ship to party search help.
If any one faced this problem let us know how to proceed.
Thanks in advance,
prasad.sit is strange .
whatever you have defaulted ship to adress has to come.
did you maintain at position level and make ensure that you have really inherited.
FM bbp_read_attributes
for your user execute and make ensure that you have inheited ship to address
when you create ship to address . did you check this box Ship-to Address in Use Address as:
muthu -
Search Help and Multiple Value Selection?
Hello
Is it possible to select more than one entry in a search help popup? If so, what do I have to do in the context attribute to be able to handle multiple return values from the search help popup?
Regards,
Mathiashi matthias.....
you cannot select multiple lines in a search help. because... you are going to return to only one field... else what you can do is. have a small button which acts as a search help and pop up a window which has a table in it. so you can select multiple values.
---regards,
alex b justin -
FM : to call collective Search help and update two fields in SSCR
Hi Experts,
I have problem while using collective serach help.
My scenario is using Collective Search help thru that i want to update 2 fields in my selection screen.
Thru this function module F4IF_INT_TABLE_VALUE_REQUEST i can mapping and update two fields using DYNP_VALUE_UPDATE but using this function module i can't able to call my Collective Search help
in other way
Thru F4IF_FIELD_VALUE_REQUEST i can able to call the collective search help but _i can't mapping field and can't updated the
selection screen field_
Is any otherway to do it, Please help me ASAP.
Regards,
Florian.Hi Friends,
I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
The search help is working fine and i am getting the entries with the following code.
The problem is i am finding extra popup on screen.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname = space
fieldname = space
SEARCHHELP = 'MAT1'
MULTIPLE_CHOICE = 'X'
STEPL = 0
value = 'MATNR'
*dynpprog = progname
*dynpnr = dynnum
*dynprofield = 'CARRIER'
CALLBACK_PROGRAM = 'ZTEST_1_PRA'
CALLBACK_FORM = 'F4CALLBACK'
TABLES
RETURN_TAB = RETURN_TAB
EXCEPTIONS
FIELD_NOT_FOUND = 1
NO_HELP_FOR_FIELD = 2
INCONSISTENT_HELP = 3
NO_VALUES_FOUND = 4
OTHERS = 5.
Maybe you are looking for
-
Printing in ECC5 on a external ITS
Hi, We are upgrading from 46C to ECC5. We still want to use the external ITS. Everything works fine except that the printing in the iTS does not work anymore. We are on ITS 620 and everything worked fine before. We use the new LPD1 device that ECC5 n
-
PO creation with respect to PR in SRM
Hi All, Greetings!!! I am new to SRM. My requirement is to create a PO with reference to PR that is crteated in SRM. Some custom fields are added in shopping cart and same are updated in PR. Now, I need to update the same custom fields in PO creation
-
Encore CS4 I received this error message: PrimoBurnerSDK -unkown error.
Under the Windows 7 Ultra OS, when I loaded Premiere Pro CS4, I received the following error message and thereafter when I tried to write a DVD with Encore CS4 I received this error message: PrimoBurnerSDK -unkown error. I know the Burner is working
-
Solution Manager Workflow problem
Hi, I am triggerring a workflow for support message creation in transaction crmd_bus2000116 in solution manager. It been assigned to a particular agents by using a customized workflow . I am facing two problems... 1. The person to whom I am assigning
-
HT5622 Apple ID locked. How to unlock
My apple account has been locked due to multiple attempts of incorrect answer to security question. Who can unlock my account? Contacted apple, but it takes up to 48 hours to get answer from them. I need to make a purchase now . Can anyone help?