Can the EXECUTE button on a selection screen suppressed?

Can we suppress the EXECUTE button on the selection screen?

Hi
The flowlogic Keyword at EXIT-COMMAND is a special addition to the MODULE statement in the Flow Logic .AT EXIT-COMMAND you can call a module before the system executes the automatic fields checks.
u2018SUPPRESS DIALOGu2019 command allows to perform screen processing u201Cin the backgroundu201D. Suppresing screens is useful when we are branching to list-mode from a transaction dialog step.

Similar Messages

How can i declare a single radio button field in selection-screen ?

How can i declare a single radio button field in selection-screen ?

>
Rob Burbank wrote:
> And how will you turn it off once it is turned on??
>
> Rob
Thats correct ;)...See ravi if users will ask so many things its our Job to convay the correct solution ....
Just post your org requirement..SOo some body guide you better//
Sas

While opening a screen none of the radio button should not selected

Hi,
i have three radio button on the screens.By default the first radio button is getting selected for each and every time when ever i'm opening the screen.i dont want the default select should happen and even i dont want any of the radio button should be selected.
how i can acheive through dialog programming.
kind regards,
Poornima.

Hi,
You can have radio buttons with any one field selected from a group .
ex:
selection-screen begin of block b2 with frame title text-042.
parameters:r_detail    radiobutton group g2 user-command cmd default
'X',
       r_sumry   radiobutton group g2,
       r_totals    radiobutton group g2.
selection-screen end of block b2.
or
selection-screen begin of block b2 with frame title text-042.
parameters:r_detail    radiobutton group g2 user-command cmd,
       r_sumry   radiobutton group g2 default 'X',
      r_totals    radiobutton group g2.
selection-screen end of block b2.
or
selection-screen begin of block b2 with frame title text-042.
parameters:r_detail    radiobutton group g2 user-command cmd,
       r_sumry   radiobutton group g2 ,
      r_totals    radiobutton group g2 default 'X'.
selection-screen end of block b2.
Else you can opt for checkbox and have all of them not checked.
Regards,
Dep

Can the HOME BUTTON(the circular button under the screen) or any other button on the front of the phone flash an LED light on notifications

pls reply and if it is 'no' then pls advice the apple company to do this in the next iPhone.

Please don't post the same question multiple times. Your question was answered here: Can the back button of an iPhone 5s flash an LED light on any notification
Not on the front, only the LED flash.

Determine the active tab in a selection screen

Hello,
is it possible to determine which tab is currently activated in a selection screen with several tabs?
I will include different code in different tabs. When pressing the "execute" button the program should return the active tab (as a value).
Thanks
Florian Schwaiger

Hi florain,
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
thanks
nagendra

Button on standard selection screen

HI experts , can any budy tell me , that, can we put a button on the standard selection screen , means on screen no 1000, PLease suggest ur ans, i have a requirement to create a button on the first selection screen by selection the check box on the standard selection screen , a button should be appear on the standard selection screen.
THanks in advance,
Rahul

Hello,
What do you mean by "but ur second concept is wrong we can set our own pf-status then how can u say that set the status".
Read again what I wrote! I said that the solution for your problem is to create a PF status of your own and that one will substitute the STANDARD one. This is the reason for having to insert the Execute (F8) button on it. Otherwise, if you don't insert it, you wont be able to execute your report.
Also, plz reply if u know the exect ans? this is not nice to say, specialy when the answer is correct. I've inserted buttons in standard selections screen lot's of times.
Regards.
Valter Oliveira.

Need to add buttons to a selection screen

hi i need to button on top of a selection screen next to the execute button, if any one guide me or send some sample code it would be gr8

Hi
It can create max 5 buttoms (see the structure SSCRFIELDS).
TABLES SSCRFIELDS.
SELECTION-SCREEN FUNCTION KEY 1.
SELECTION-SCREEN FUNCTION KEY N.
SELECTION-SCREEN FUNCTION KEY 5.
INITIALIZATION.
MOVE: 'My button 1' TO SSCRFIELDS-FUNCTXT_01,
      'My button 5' TO SSCRFIELDS-FUNCTXT_05.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
     WHEN 'FC01'.
     WHEN 'FC05'.
ENDCASE.
Max

Cannot find the execute button in an alv

hi to all experts,
im unable to find the execute button in alv grid im using reuse_alv_grid_display.........

Hi, Mozam Khan
I think you better to place two Radio Button on the Selection Screen
1. Display Output in ALV
2. Display Output in Smartform
in this way according to user selection you can Perform the Form of ALV or Smartform.
Hope will help you.
Kind Regards,
Faisal

Add a button in report selection screen

Hi Experts,
I want to add a userdefined button in report selection screen....so far i have written code like this,...
TABLES : sscrfields.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-010.
PARAMETERS: P_ID LIKE ZBAPITABLE-ID,
P_NM LIKE ZBAPITABLE-NAME.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-020.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (11) TEXT-001 FOR FIELD R1.
PARAMETERS: R1 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-002 FOR FIELD R1.
PARAMETERS: R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-003 FOR FIELD R1.
PARAMETERS: R3 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (10) TEXT-004 FOR FIELD R1.
PARAMETERS: R4 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN: FUNCTION KEY 1.
MOVE 'SAVE' TO sscrfields-functxt_01.
If i use code like this button was added in application tool bar
but in my selection screen i have two blocks ....in first block i have input fields, and in second there is set of radio buttons...Just below that i want to put one button ....how it is possible...
can anyone plz help me?
Regards,
veena.

Here's th docu link:
[Pushbuttons on the Selection Screen|http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba81635c111d1829f0000e829fbfe/frameset.htm]
Regards,
Clemens

Hide the Execute Button

Dear all,
Im writing a report for reading details from a barcode reader.
My requirement is in At seletion screen I do the necessary processing and want to hide the execute button.
Please could any one help me.
Thanks
ann

Hi Ann:
It's late for my answer, but I send this post. May be useful.
I faced the same problem for other reasons.
I solved the problem by doing:
AT SELECTION-SCREEN OUTPUT.
DATA gt_ucomm TYPE TABLE OF sy-ucomm.
APPEND: 'ONLI' TO gt_ucomm.
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
       EXPORTING
            p_status = sy-pfkey
       TABLES
            p_exclude = gt_ucomm.
This works well if your selection screen is number 1000 (default).
But if you define a selection selection screen with another number, like this:
SELECTION-SCREEN BEGIN OF SCREEN 100.
PARAMETERS:
    p_examle like sy-datum.
SELECTION-SCREEN BEGIN OF SCREEN 100.
And you don't define a Status GUI for screen 100, then the solution does not work because sy-pfkey is not informed.
Then I solved by changing the call to the Function Module in this way:
AT SELECTION-SCREEN OUTPUT.
DATA gt_ucomm TYPE TABLE OF sy-ucomm.
APPEND: 'ONLI' TO gt_ucomm.
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
       EXPORTING
            p_status = '%_00' "Status GUI for screen 1000
       TABLES
            p_exclude = gt_ucomm.

How to schedule the background job using current selection screen field val

Hello Friends,
How to schedule the background job using current selection screen field values.
after completion of the job the spool should be sent as a mail to SAP Inbox.
Is there any way to create the variant dynamically by reading the current selection screen values.
Thanks,
Ravi

Hi,
To get the variant details you can use teh following FM.
'RS_VARIANT_CONTENTS'.
Regards,
Ankur Parab

Ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

ipad 2 screen is black . when i press the power button it takes a screen shot but i have no functionality . tried holding the home and power button together but the screen just flicker and stay black . no apple icon shows up. help please

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

Toggle Button in a selection screen

Hey Folks,
I am pretty new to Screen/Selection Screen programming. I want to how does one go about adding a toggle button in a selection screen?
The toggling of a button should trigger
1) Toggling between visibility of blocks
2) Toggling the name of the button
3) Toggling the icon on the button
Lastly what is the icon for an expan/collapse operation?
Thanks,
Puja.
Edited by: Puja Malhotra on Oct 2, 2008 8:14 AM

Toggling was made possible with the loop at screen during selection screen output

Allowing a User to choose the ALV layout format on selection-screen

Hi all,
I would like to know how i can add a parameter to my selection-screen which would allow the User to choose a saved ALV layout format before pressing F8 rather than after. As used in CO15 or MB51.
Thanks femi.

yes , You can check the program BCALV_TEST_FULLSCREEN_LAYOUT to check how F4 help is to be used .
to check existene of variant is pretty simple.
Pass the variant name in the ALV display FM .

Can the submit button be deleted

For the convenience of our learners, my manager would like me
to delete the submit button from the multiple choice questions we
are using in our movie. He would Captivate to provide feedback
immediately after the learner clicks his/her answer in the radio
button. Is this possible?
Note that I have tried making the submit button transparent
and placing it behind the radio buttons for all answer options.
When this is done and an attempt is made to click a radio button,
the radio buttons are unavailable and a failure message appears.
Apparently, the submit button is over the radio buttons or at least
not transparent so that they can be affected.
JazzAl

Rick:
One more thought about eliminating the Submit button on
multiple-choice questions.
I now know that:
1. I cannot delete the Submit button from a
Captivate-generated multiple-choice question
2. The function that the Submit button performs must be
retained in multiple-choice questions to enable the scoring
function, which I want to retain.
3. Although I can make the Submit button transparent and put
it in the same location as the answer options' radio buttons to try
to make the learner's one click (that selects the answer option)
activate both the radio button and the Submit button, the result of
the click will be only clicking the Submit button. The radio button
does not get marked as being selected.
I would like to do some further work on trying to allow the
learner to select his/her answer and click the Submit button on one
click.
On the theory that the radio button and the Submit button
cannot be selected in one click because the is because the Submit
button is in front of the radio button, I wonder if it might be
worth it to try to go into the files that support the building of
multiple-choice questions and attempt to change the layering order
so that the radio buttons are in front of the Submit button? Do you
think can be done? Do you think it might work? Thanks for any
insights you might have on this idea.
JazzAl

Can the EXECUTE button on a selection screen suppressed?

Similar Messages

Maybe you are looking for