Can the Gigabit Ethernet LAN Port be used with a Thunderbolt to Gigabit Ethernet adaptor and then to a Thunderbolt Hard Drive as a back up drive?

If you use ethernet to connect the two AirPort Extremes together, you'll have Gigabit speeds available at all of the ethernet ports on both routers.
If you connect the second AirPort Extreme using wireless only and configure the Extreme to "extend a wireless network", then the maximum speeds that the second router can attain will be limited to the capability of the wireless connection. So, if you connect at normal "n" wireless speeds of say 130 Mbps, that will be the maximum speed available at the ethernet ports on the second AirPort Extreme.
I think you can easily see the difference between Gigabit ethernet, which is 1000 Mbps compared to "n" wireless at 130 Mbps. Even if you can manage to connect at 5 GHz speeds for wireless, the max speed will be in the 300 Mbps range, more than 3 times slower than Gigabit ethernet. Normal "n" speeds will be about 7 times slower than ethernet.
For streaming high definition video and other demanding sources, you'll need as much bandwidth (speed) as you can get. Ethernet is always the best choice if you can possibly use it. And...there's no wireless interference on an ethernet connection.
Message was edited by: Bob Timmons

Similar Messages

Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?

Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ? Thank you

Mail updates are usually part of OSX System Updates and no stand-alone updates.
Try downloading and installing the 10.6.8 Combo Updater from here http://support.apple.com/kb/DL1399
Stefan

Can the iSight built in camera be used with msn messenger?

if so. how can i make it work?!?!

Hello jellosaladE
can the iSight built in camera be used with msn messenger?
An iNtel Mac can use its built-in iSight "with" MSN Messenger.
For how, see this thread:
http://discussions.apple.com/thread.jspa?messageID=5087786&#5087786
(Also at your other post of this same question:
http://discussions.apple.com/thread.jspa?threadID=1134579)
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Can you configure a static port to use with certsrv.msc?

I am trying to use certsrv.msc to connect from my workstation to the CA for administration purposes. Workstation is Win7, CA is 2008 R2 Enterprise running Enterprise Subordinate on a dedicated box.
I configured a static DCOM port for certsvc by following this article, including bouncing the service and also rebooting the CA box:
http://social.technet.microsoft.com/wiki/contents/articles/1559.how-to-configure-a-static-dcom-port-for-ad-cs.aspx
The static port was opened in the firewall from my workstation to the CA. We also found that TCP 445 was required, so that has been opened as well, port 135 & other ports normally needed for autoenrollment should be open. Sniffing the firewall
showed that a random high numbered port that is not the static dcom port is being attempted - this is the only port showing dropped packets & no traffic on the static port.
I am wondering if there is a way to configure a static port for this high-level random port to use with certsrv.msc as I was able to do with the certsvc dcom port? I am trying to avoid having tens of thousands of network ports wide open going to my
CA... Thanks in advance!

Hi Steve,
I am sorry that I wasn’t able to find references about restricting certificate services only use one port in the random port range.
However, we can configure RPC dynamic ports allocation to restrict port range. In the meantime, we should keep at least 100 ports open to keep necessary system services running.
More information for you:
How to configure RPC dynamic port allocation to work with firewalls
http://support.microsoft.com/kb/154596/en-us
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017/en-au
Firewall Rules for Active Directory Certificate Services
http://blogs.technet.com/b/pki/archive/2010/06/25/firewall-roles-for-active-directory-certificate-services.aspx
Best Regards,
Amy Wang

Why do files (UPS labels) from the Internet not print properly (they used to), unless they're saved as PDFs and then printed?

Files from the Internet (for example a UPS label) no longer print properly (too light, faded out), whereas they used to print just fine directly from the Internet source. The only way they print properly now is to save the file as a PDF and print from that. So I'm think it's not the Canon printer. This hasn't happened before, and I'd like to know what I can do about it, what's going on. This is via Firefox and Safari on my Mac laptop, OS 10.6.8.
Thanks, David Smoak

2) Thanks for the tip. It isn't what I had in mind, but writing scripts to do the work (via tells to "System Events") and then invoking those scripts with osascript is indeed a reasonable solution.
3) You may not have understood me. The only peculiarity is that I sometimes see "Enable Folder Actions" in the menu even when Folder Actions are, in fact, globally enabled, so that I should instead be seeing "Disable Folder Actions" along with "Remove a Folder Action" and so forth. As you say, I always see "Configure Folder Actions...". Surely this is just a minor bug.
As far as the main issue, I don't believe I have any code that activates the Finder. My original message has a sample of one of my scripts, and you can see that it doesn't mention the Finder at all. As I said, I get the same behavior with the sample Folder Action scripts in /Library. As one more test, I tried a absolutely empty script---the Script Editor window contains not a single glyph when I save it. If I attach this completely empty script as a Folder Action to a folder, any addition or deletion from that folder activates the Finder, though nothing else happens. Still looking for help on this one!

Number of Ethernet Devices Supported on Ethernet/LAN port of Airport Express

I am using an Airport Express to extend my wireless network (Apple Time Capsule Base) and using the ethernet/LAN port to connect a wired device (a DirecTV DECA) so that my DirecTV HD DVR box can connect to the internet thru my home network. Works great. I have Whole Home DVR installed and so the other DirecTV receivers in the house are connecting to one another over the the coax and using the (DECA - Ethernet over Coax) to talk to one another and they each recieve an IP address via DHCP from the Apple Time Capsule Base - obviously thru the brdige created by the AirPort Express. Recently added an additional DirecTV reciever and for some reason this one will not get an address? Is as if the Aiport Express has "maxed out" the number of ethernet devices it will connect or bridge on the LAN side? I have tried shutting everything down and bringing DirecTV recievers on in different orders and it is alwasy the last one (the 5th one) that fails to get an address. Anyone have any knowledge if there is indeed a limit of the number of ethernet devices that are supported on the Ethernet/LAN port of the Airport Express? Thanks for any insight.

in theory, yes, but you work network admin may have locked the network preventing this from working

HT5622 We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids? Thank-you

We are a family of 4, each with their own apple device. Is it best for us to set up individual apple ID's for things like ITunes? If we do can the same e-mail address be used for all of them or do we need to create e-mails for the kids?
Thank-you

1. Yes, it is.
2. You may be able to use the same address by adding a plussed suffix to it, such as [email protected] If that doesn't work, create separate emails.
(103279)

How do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?

Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance

In which cases can the ABAP statement CALL TRANSFORMATION be used?

Hi friends,
here is my questions with options below.
In which cases can the ABAP statement CALL TRANSFORMATION be used? (T/F)
-To transform as iXML document object into and ABAP data structure using
XSLT.
- To transform an XML document contained in a string into another XML
document
using and XSLT program.
- To get canonic XML display of an ABAP data structure.
- To transform an XML document contained in an xstring into another XLM
document using an ST program (Simple Transformation).
- To transform and ABAP data structure into an SML document using ST.
Kindly give me the expalnation to each statement with either True or False.

CALL TRANSFORMATION is a new language element in ABAP that we can use to <b>call up the transformation</b>.
The type of transformation:
XML to XML
XML to ABAP
ABAP to XML or
ABAP to ABAP is already determined by the two additions SOURCE and RESULT in CALL TRANSFORMATION.
Check this link for more details.
http://help.sap.com/saphelp_nw04/helpdata/en/a8/824c3c66177414e10000000a114084/content.htm
Regards,
Maha

Can the 100% browser width function be used in non-master pages?

Can the 100% browser width function be used in non-master pages? I watched the video about pulling it to the red edges, and did that on some of my parent pages, but when I preview the page in browser, it doesn't work. I can still see my browser edges.
The idea for the website I am designing is to have different full browser width images for different pages, and I'm looking for a way to do that. I would create a different master for each page, but there are more than 20 pages...too many master pages! Thanks!

Hi Lindsey,
The 100% width feature works with rectangles and text frames on both master pages as well as regular pages. It doesn't work with images in either case. A possible workaround would be to use a rectangle with a background image, depending on the nature of your image.
Regards,
Nathan

Can the tilt shift blur filter be used in a smart object?

can the tilt shift blur filter be used in a smart object?

I could be wrong, because I don't have PS in front of my, but I'm pretty sure the capability to use those blurs in smart objects was added in CC.

Can the MacBook Pro 13inch mid 2008 use 1333Mhz RAM?

Can the MacBook Pro 13inch mid 2008 use 1333Mhz RAM? I just bought another 4 GB of ram, but it isn't 1066Mhz like the other stick. Everything works and passes a memory test but the MacBook does not wake from sleep. It only does this when the new RAM is inserted. I have tried it on its own and with the old memory and it only does it with this faster memory installed. It says its at the same speed as any slower RAM installed.

So 1066Mhz is the only ram that works.? As in there isn't anything I need to change or the ram just isn't working correctly? I was always under the impression that ram always clocked it self down to the slowest module installed, which this one does, it just does let the Mac come out of sleep..
There may be some 1333MHz RAM that would work in your machine, but it's not what you bought, and the only way to find it would be to keep buying more and more modules until you found one that worked. It is always safest to buy RAM with the right specs for your machine from a known-reliable, Mac-savvy vendor that offers a lifetime warranty and no "restocking fee" if you get a module that seems to be bad or go bad.
RAM that is faster than spec will often clock itself down, not to the speed of the slowest module installed, but to the speed the machine's architecture is designed to use. But it doesn't always work — not even when it appears at first to work. And there's never any benefit to installing faster-than-spec RAM, because it never speeds up the machine's operation at all.

Can the app for autistic children be used on an android

can the app for autistic children be used on an android?

Android and iOS are two different operating systems. So one app won't work on the other unless the app makers make a version for each operating system.

Can the built in isight camera be used on msn mesenger

can the built in isight camera be used on msn mesenger if yes then how?????

iChat/AIM is seldom used here in Europe. It's all MSN here i'm afraid. Is there software that we can use to videochat with MSN-users? What other videoconferencing software works with the build-in iSight?
Kind regards,
Dimitri
iMac G5 (iSight) 20" Mac OS X (10.4.2) 1,5 Gb RAM

I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

Hi Robert and welcome to Apple Discussions,
There are adapters available that convert micro cards into fullsize ones.
You will also need a USB card reader if you do not have one.
Good luck,
Alan

Can the Gigabit Ethernet LAN Port be used with a Thunderbolt to Gigabit Ethernet adaptor and then to a Thunderbolt Hard Drive as a back up drive?

Similar Messages

Maybe you are looking for