Can the service provider be able to see my videos used on facetime?, can the service provider be able to see my videos used on facetime?
can the service provider be able to see my videos used on facetime?,
Since it goes through their network, theoretically yes. But there is no reason they would.
Similar Messages
-
From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.
Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address. -
I have three separate email accounts showing up in my Mail program on my MacBook Pro. Two of them are my local email provider one showing up as SaskTel Email and the other showing up as sasktel.net. The third one is ICloud. Can I delete one of the SaskTel ones, as they seem to get the same mail.
What do you tell your friends to use to send you email?
Are they going to the same "Incoming Mail Server", logging in with the same "User Name" ? If so, they are two instances of the same account, and one can certainly be deleted with impunity.
This detailed information is in
Mail > Preferences > Accounts > ...
... click on the accountname and inspect those fields. -
I find the lightening cable that came with the iphone 5 showing peeling of rubber .
I had taken it to the local support (service point) who says it is not covered under warranty.
As an engineer I can vouch that this is a clear case of material defect.
What is my remedy
T.Srinivasan.
Chennai IndiaI had taken the Iphone 5 with lightening cable under warranty to the service supporter here in Chennai India and after logging in the complaint the support engineer had informed me that the same claim was rejected.
This happened a couple of months ago and now I find almost the entire cable has peeled off (Insulation).
Initially I thought there perhaps was a chance for handling (carrying etc in your laptop bag) that could have caused the same.Now I am convinced that the material defect is the problem.
Is there a way to bring this to the attention of Apple by email probably with a photo for them to appreciate my problem as the service support engineer authorised is unable to appreciate the problem.
Thanks for your reply
T.Srinivasan Chennai,India -
Hi,
Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
++++++++++++++++++++++++++++
Source: Desktop Window Manager
Event ID: 9003
Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: mmc.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: javaw.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: Explorer.exe.
++++++++++++++++++++++++++++
Source:Desktop Window Manager
Event ID:9009
Detail:The Desktop Window Manager has exited with code (0x40010004)
++++++++++++++++++++++++++++
Source:Microsoft-Windows-Winlogon
Event ID:6005
Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
++++++++++++++++++++++++++++
In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
by we do not reboot the server?Hi,
The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
If the issue can always be re-produced, then I would suggest you fully patch the system.
More information for you:
The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How can I find out the previous service provider my device is still registered with?
When trying to create a BIS account, I received the error message that my device was already registered with a different service provider and that I would have to reregister it. The problem is that I bought it new from cordlessphoneworld.co.uk and it was supposedly "completely refurbished".
My Pearl 8100 is a BT phone, however BT confirmed to me that it was not registered with their network. The seller, cordlessphoneworld.co.uk, told me to contact BlackBerry support, and BB support told me to talk to my service provider (O2 UK) who has already told me I would have to get in touch with the previous service provider.
How can I get my BB released from its current BIS registration, or at least find out who it is registered with, in order to finally enjoy its full functionality and not just the regular phone stuff?
My BB info:
PIN: *********
IMEI: #################
Happy for any help or ideas!!
Thanks.
EDIT: Removed personal information
Message Edited by Andy on 08-30-2009 02:33 PMTheres a high chance it was set up with the original carrier that is was sold with.
To find this out you need to get the vendor id of the device.
Do this by holding down (all at the same time ) the ALT+CAP+H button..
Or
Whilst pressing down ALT, select E Then S then C then R
You should see a little page pop up with random info.
What you are looking for is the vendor ID. a three digit number.
Then I will post a list of all the vendors IDS at the end of this message as i can't remember the link..
Anyhow, find the carrier from the list and call them asking them to release the PIN..
IF... the prev user didn't register it with that carrier (which would mean you phone has possibly been used twice before) then you can call your current Carrier and ask them to escalate the call to RIM who will be able to tell...
Hope this helps..
ALT+CAP+H
OR
ALT+ E,S,C,R
100 T-Mobile US
101 AWS
102 Cingular Wireless
103 Nextel
104 Sprint PCS
105 Verizon
106 Alltel
107 Rogers
109 BWA (Aliant/Sasktel)
111 MM02 DE
113 Telfort
114 T-Mobile DE/AU
115 TIM
116 Hutchison
117 Bouygues
118 SFR
119 Orange_France
120 VODAFONE (UK)
121 Telcel
122 Telstra
123 T-Mobile (UK)
124 Vodafone Germany
125 MM02 UK/IRL/NL
126 Telus
127 SMART
128 Starhub
129 Telefonica
130 Swisscom
131 Cable & Wireless
132 Vodafone (IT)
133 Vodafone (ES)
134 T-Mobile (NL)
135 Cincinnati Bell
136 Telefonica_LAM
137 Vodafone Austria
138 Vodafone Australia
139 Vodafone Ireland
140 Vodafone Sweden
141 CSL
142 Orange UK
143 Vodafone New Zealand
144 SingTel
145 Globe
146 Optus
147 Orange Mobistar
148 Vodafone_HU
149 Bharti
150 KPN
151 TIM_Greece
152 Proximus
153 Vodafone_Portugal
154 TIM_Brazil
155 BT_Mobile
156 Earthlink
158 E-Plus
159 BASE
160 Dobson
161 Vodafone_Egypt
162 Orange_Switzerland
164 Triton
165 Maxis
166 Vodafone_Denmark_(TDC)
167 MobileOne_(Voda_Singapore)
168 Vodacom
169 T-Mobile_PO
170 T-Mobile_CZ
171 T-Mobile_HU
173 MTN
174 Entel
175 Amena
176 SmarTone
177 TCS
178 Avea
179 F100
180 Turkcell
181 Partner
183 Orange_Global
186 Telkomsel
188 Vodafone_Greece
189 USCC
190 Mobilink
194 Voda_Luxembourg
195 Voda_Iceland
198 Vodafone_CZ
204 China_Mobile
205 Movilnet
209 Sympac
210 TIM_Argentina
212 Etisalat
214 AMX
215 Telefonica_Venezuela
217 Orange Romania
218 KTP
222 Mobitel Bulgaria
224 PCCW/Sunday
227 Mobily
229 Eurotel
230 Hutchison Essar
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~ -
"NOT solved" CO needs upgrading, can't provide the service I'm paying for.
For the record, I accepted the solution to my original post as advised by support, in an effort to be able to unlock the original post but it didn't work.
Please review the original post "CO needs upgrading, can't provide the service I'm paying for." for the beginning details of my issue.
Here's the update and final word from Verizon....
Worked on the issue in private support from 2/28/13 to 3/15/13. I was told my issue was submitted to the DSL escalation team & engineering group. I was told that it is a capacity issue at the CO, where upgrades are needed, so at the present time there is nothing more they can do until the upgrades are completed.
Needless to say, I'm not happy. Now I'm currently looking into compensation in the form of some type of reduction in my monthly fee until the issue is resolved at the CO and I'm able to get the speed I'm provisioned. Wish me luck this is my last option.
As I stated in my original post, I really have had a good relationship with Verizon up until now. Unfortunately, I'm not seeing a light at the end of the tunnel so I may have to make a change. I'll update this if anything changesThis is probably my final update...
I received a voice message in regards to my request for some compensation but there was nothing Verizon can do. The info given was that there was no estimated time for the upgrades to be completed. The offer was to down grade my plan to a lower provisioned speed & pay a lower rate. For both, it was not what I wanted to hear.
I wanted to keep my plan & provisioned speeds. I am & have been happy with my service & speed(when it's where it should be), it just that I'm not getting what I pay for at all times. Since there is no estimated time for upgrades (so that I get those provisioned speeds) I was inquiring about a possible adjustment in my monthly fees(maybe a few bucks off per month) until the upgrades are done. So now as I understand Verizons stance, I need to continue to pay the full price & Verizon won't be providing my provisioned speed. That just doesn't sound like a fair deal.
Unfortunately it appears that Verizon will now be loosing a long time customer, something I really wanted to avoid for the previously stated reasons. As I now look for an alternate ISP, I will continue to monitor my private support case in the hopes that something changes that will allow me to continue my relationship with Verizon as my ISP.
I want to thank everyone for their assistance in trying to resolve my issue, you have all been professional, courteous & helpful(as much as you could have been) in our communications, Kudos to all. -
I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all helpThe supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource. -
How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!
Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy -
Not able to see the Service Desk Message in "Solution_Manager"
Hi Gurus,
Can anyone help me solving my problem,
We are using Solution Manager 4.0, and want to implement service desk for our systems. I have configured the solution manager service desk and we are able to rise the message from satellite system to solution manager, but i am not able to see those messages in "solution_manager" transaction under service desk in solman, but those messages are reflecting in transaction code "dnotifwl" under "No Processer assigned" option of Personal selection>Notifications Tab.
Pease guide me to resolve the problem.
Thanks,
Krishna.JHi Nico Effenberger ,
Thanks for ur reply,
1.have not copied slfn to zslf but modified the entries of slf1 and using directly. When i try to copy either it is copying only the entries or saying Entry zslf does not exists in DNOC_TYPE_NOTIF.
2. I am having full authorisation sap_all, and sap_new for my system
3. yes i have created a slfn based on this slf1 messages.
It will be very helpfull if you could send me any doc related to solman service desk configuration you have done.
thanks & regards
Krishna Joish -
I have entered the information from GoDaddy under manual setup and the mail app tells me it cannot connect to the server. It does connect to a gmail account, but that is not helpful. I was wondering if anyone has tried linking to GoDaddy or other account manually and what additional steps it takes.
Actually, I was able to connect to an IMAP account from (German mail provider) posteo.de without problems. Not so with FastMail.fm, which is a much bigger service provider than posteo.de, and also pretty much IMAP standard compliant.
Are there different IMAP configurations (all folders on the same level vs. all folders as subfolders of INBOX) that can influence this? And what can be done to connect FastMail to Firefox OS? -
I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
I connected the Airport Extreme wireless to the existing network of my router. At the Airport there is connected via USB a Printer and three hard discs. All works well on my MacBook Pro - I can print and use the hard discs. On my notebook and my desktop, both with XP-SP3 I can use the printer only. In the Airport service program - manual set up - hard discs I can see the drives with the correct names but I cannot work with it. I don't find neithe the Airport Extreme nor the drives in the Windows Explorer. Of course I've set 'filesharing' etc. What do I do wrong? Where is the mistake in the set up?
apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together. -
Can't see Document service in the WebCenter Spaces
Hi,
I have a problem with the document service in the WebCenter Spaces. I've followed the installation and configuration procedure from the documentation including the setting up the Content repository to UCM in Fusion Middleware control console, but I still can't see the Docuemnt link under the Content and Services tab in my spaces. However, if I go to the Documents page under the Pages tab, it will show me some folder content from the content server. Do I need to anything else to the document service available in WebCenter Spaces?
Thanks,
StevenBy connecting to the Oracle Content server, you will be able to get all out of the box Document Service Task Flows in the Resource Catalog. You will NOT see the Document service under the Content and Services tab however.
-
Are you aware that probably Google mail, has interfered in Lightbeam's page size ?
I am no longer able to see all the Graph Sign's in the centre of the page because they are now in majority, so almost completely, vertical down the horizontal line. ( although, Reset Zoom level is adjusted to 100% )
Can you reset the page size for me, and also the Graph Logo's back to the centre of the page again. Please.
At the same time:
My touch screen now, from my laptop, is extremely more Sensitive for Static load of my hands, resulting in trouble during the writing process, ... because, now the writing cursor, jumps away unexpected if my hand comes near to the Touch Screen.
It triggers my temper, ... Please, can You help me out here ???
Small history:
After I used the possibilities of blocking several Direct and In-directs followers of my personal Internet activities, it is Google Mail, who is in War with me now, and inside Gmail I am no longer able to sign out.
Because Gmail lay out is partly out of service.
Thank You all for your cooperation.
Jan MinkIt is possible to reset the zoom size.Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
* To make things bigger, press '''Ctrl''' and '''+''' at the same time.
* To make things smaller, press '''Ctrl''' and '''-''' at the same time.
* To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
'''Using NoSquint:'''
#After installing NoSquint, make sure you have the Add-on Bar displayed:
#*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
#Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
#*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
Please let us know if this helped you!
Thank you.
Maybe you are looking for
-
How do you share a photo album?
OK I have a photo album in iPhoto. How do you share that now that mobileMe is gone? I want to be able to send a link to someone whether or not they have iCloud. I tried making a shared photoStream album, and it sort of works. I can't re-order the
-
Hi al I got an iphone5 as a gift from my brother from canada. Now its sleep/wake button is not working..i am in India..what should i do now..its 6 months older hanset..is its waaranty valid here in India
-
"Some of the object names cannot be shown in their user-friendly form"
Error states: "Some of the object names cannot be shown in their user-friendly form. This can happen if the object is from an external domain and that domain is not available to translate the object's name" We are receiving this error when we click o
-
Configure Target - connection failed
Hello, I have installed 11g Enterprise Manager Grid Control and deployed an agent using the silent install option on a second machine. Once the agent installation completed, it's Oracle 11g Database instances got picked up by EM. The problem is that
-
PC went to sleep 3 hours into a migration assistant transfer to MBA.
Is there any way to recover? The situation was complicated by the fact that while the screen was dark on the PC, I must have inadvertently hit the close box. I turned off the sleep function on the PC (too bad the migration assistant didn't remind m