Can the WLPI be used for a perl web site

We have a client, which has a perl(Apache/mod_perl) based web site. Cutomers submit orders on the web site and right now there is an order-processing system, but the client is looking for workflow/process product which will ease with all this order processing stuff like acknowledgement, approval, shipping, etc....So my question here is, can they use the WeBLogic Process Integrator for this purpose? The reason I am asking this is, looking at the WLPI docs, it looks like a Java/WebLogic only product and cannot be used for a perl web site.Thanks,Shireesh Thanneru

Yes.
However I would not recommend it, at least as your primary connection for the SmartTV. Relying primarily on VZW data plans is a bad way to view video services such as Netflix at the moment. It is very easy to chew through your plan with only a few videos depending on the resolution and a few other factors. Not only that but a smart TV may be periodically checking the internet from time to time to download firmware updates or provide reporting stats to the manufacturer.
VZW Jetpacks continue to be a poor choice for home primary internet replacement. The data plans that come from VZW and all other metered wireless providers are not friendly to this kind of internet traffic. Letting your guard down for a moment could result in costly overages and once you accumulate them you will be liable to pay them. A normal cable or DSL line with a high/unlimited cap would be more appropriate.
If the Jetpack is a backup or temporary internet connection then go for it. This is what a Jetpack is designed for, you can get by every now and then without too much risk. Just make sure you are powering your Jetpack down as soon as you are done streaming and keep a close eye on your data plan before and after any major viewing.

Similar Messages

How can I set Internet Explorer document mode to be used for Outlook folder web sites?

Hi,
I'm using an application that creates an overview of all our outlook calendars into a HTML web site which is displayed via a MS Exchange public folder - using the folder web site feature.
With a recent update of this application I'm getting scripting errors that are caused by the document mode which is active in Outlook (IE7 mode).
Even when using the following meta tag:
<meta http-equiv='X-UA-Compatible' content='IE=edge'>
to force IE into the most current rendering mode it still uses IE 7 mode.
Is there any way to fix this?
Thanks
Thomas

Do you mean MapiFolder WebView?
MapiFolder WebView is the folder property but there is no settings or relevancy properties to control it to open any of IE mode in Outlook client. Thus, I think we cannot use Meta tag to force the page to open with a specific IE mode.
Not sure which exact application you are using here, but it happens right after a recent update, you probably need to check with the support of the application for support.
Kapaal.

How get the user that use CRM in my web site

Hi all,
I have a web app that connect to my CRM. I use C#.
I connect to CRM with my credential because I'm admin in CRM.
But my app is used from others CRM user and I need to know who is systemuser CRM that use app.
I need the same of Xrm.Page.context used in js or the same context used in plugin, but I have the problem that I connect to CRM with my user. So If I use WhoAmIRequest class I have my userid and not the userid of the user that use my web app.
Is it possible know this? Do I change my login with user login in CRM?
Thanks

Hi,
As you use system admin to connect to CRM, WhoAmIRequest does not return the user from website. You are correct. Change that so that it uses logged in user however be aware that means each user needs to be a valid CRM user else they
will get not a valid user error.
Hope this helps.
Minal Dahiya
blog : http://minaldahiya.blogspot.com.au/
If this post answers your question, please click "Mark As Answer" on the post and "Vote as Helpful"

Can the sync server use for sync the custom database?

Hi,
I review some document from OCS. Sync server (mobile data sync) will connect to the calendar server to sync data. Anyway, if I would like to sync custom data, not with calendar server, is it possible? If so, how? (Can I connect mobile data sync server to the oracle database directly without calendar server?)
Further question, if the database contain binary large object (files), can I sync just only attribute of the file (for example if the name of the file is changed.)
Thanks,
Byrd

Sorry. No this is not something that is supported.

Can Cisco connect be used for small business web filtering?

I am searching for a web filtering solution for our small church. The core requirement is to use a hardware-based solution to filter all internet traffic. Our current wiring looks like this: [ISP router] --> [switch] --> [Open Mesh wireless access points]. Can I connect a Linksys EA2700/3500/4500/6500 between the [ISP router] and the [Switch], disable the Linksys wireless, and use Cisco Connect to filter all the internet traffic?
More info: We will only have a handful of wired/wireless devices which we have control over. We expect most of the rest of the traffic to be generally outside our control via personally owned devices connecting thru the public wifi. Therefore any solution which requires installation of software on individual devices will not work.
(If there are other threads on this topic I'd be more than happy to read them, I just couldn't find any.)
Thanks!!

Hey
check this article:
http://www.oracle.com/technology/pub/articles/cunningham-database-xe.html
Regards

The computer I use for Itunes only has XP so I can't use ICloud. My desktop has Vista so I can use it. But I don't want to lose all of what I have on my Iphone 4S and my two Ipads. How can I use the desktop and retain the apps, music, podcasts etc. I have

The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
I have a desktop that operates using with Vista.
I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
Isn't there a way to do this? Shift my library FROM my devices to the desktop?
Thanks

This is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

HT201250 I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

How can i write the below code using "For all entries"

Hi
How can we write the below code using "for all entries" and need to avoid joins...
Please help
SELECT aaufnr aobjnr aauart atxjcd a~pspel
agstrp awerks carbpl cwerks
INTO TABLE t_caufv
FROM caufv AS a
INNER JOIN afih AS b
ON aaufnr = baufnr
INNER JOIN crhd AS c
ON bgewrk = cobjid
AND c~objty = 'D'
WHERE ( a~pspel = space
OR a~txjcd = space
OR NOT a~objnr IN
( select OBJNR from COBRB AS e
WHERE objnr = a~objnr ) )
AND a~werks IN s_plant
AND a~auart IN s_wtype
AND NOT a~objnr IN
( select OBJNR from JEST AS d
WHERE objnr = a~objnr
AND ( dstat = 'A0081'OR dstat = 'A0018' )
AND d~inact 'X' ).
Reward points for all helpfull answers
Thanks
Ammi.

Hi,
SELECT objnr objid aufnr
        from afih
        into table t_afih.
SELECT objnr
        from JEST
        into table t_JEST
        where stat = 'A0045'
           OR stat = 'A0046'
           AND inact 'X'.
SELECT objnr
        from COBRB
        into table t_cobrb.
SELECT arbpl werks objid objty
      from crhd
      INTO table it_crhd
      FOR ALL ENTRIES IN it_afih
      WHERE objty eq 'D'
      AND gewrk = it_afih-objid.
SELECT aufnr objnr auart txjcd pspel gstrp werks aufnr
        FROM caufv
        INTO table t_caufv
        FOR ALL ENTRIES IN it_afih
        WHERE aufnr = it_afih-aufnr
          And pspel = ' '
          AND txjcd = ' '
         ANd objnr ne it_crhd-objnr
          AND auart in s_wtype
          AND werks in s_plant.
         AND objnr ne it_jest-objnr.
dont use NE in the select statements, it may effect performance also. Instead use if statements inside
loops.
loop at t_caufv.
read table it_chrd............
if t_caufv-objnr ne it_chrd-objnr.
read table it_jest..........
   if   if t_caufv-objnr ne it_jest-objnr.
    (proceed further).
   endif.
endif.
endloop.
hope this helps.
Reward if useful.
Regards,
Anu

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is overheating. What would that be - so I can have repairs done? The

In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is
overheating. What would that be - so I can have repairs done? The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
<Edited By Host>

Hello USME,
'Tis a common problem on old Macs.
Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
Good luck!... Jon

Can the iMac be used as an external monitor for a MacBook?

Can the iMac be used as an external monitor for a MacBook?

What iMac is this ?
If it is a 2009 or 2010 27" iMac than this http://support.apple.com/kb/ht3924 could apply.
Stefan

Can Adobe Collage be used for images smaller than the standard 1200 by 789?

Can Adobe Collage be used for images smaller than the standard 1200 by 789?

Hi,
* Photoshop Touch does have very good text capabilites.
* For opening the Collage as an Artwork (Merged layer) in Photoshop Touch, you just need to upload the Collage file to Creative cloud and import it directly into Photoshop Touch.
But if you are looking to preserve all the layers of the Collage file, you should download the Collage file as PSD from Creative Clould and import it in Photoshop Touch as layers.
* Collage does have canvas scalability, you can extend up the canvas on all the four directions. But i think in you case you are looking for having specific custom sizes of the canvas, which is not currently available in Collage. Currently you cannot shrink the canvas below the default canvas size.
Hope this is helpful. Please do revert back if you have more queries.
-Subbi

Can we know buffers used for a particular program?(not for the instance)

Can we know buffers used for a particular program?(not for the instance)

You can do a runtime trace using ST01 but you won´t find out how much buffer a program "uses" since the buffer is shared for all workprocesses.
Markus

Can Audit Vault be used for getting detailed read type information from the siebel database?

Can Audit Vault be used for getting detailed read type information from the siebel database?

Kramer wrote:
saurabh wrote:
check below cmd to see where archive are generated.
SQL> archive log list
And also check the following
SQL> select flashback_on from v$database;
Hi
Here is the out put
SQL> select flashback_on from v$database;
FLASHBACK_ON
NO
SQL> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     11
Next log sequence to archive   12
Current log sequence           12
The flashback is not enabled. But archive log list shows archive destination is specified to use_db_recovery_file_dest. And I checked the log_archive_dest_10 still empty
Flashback off or on has nothing to do with it.

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

Can FW CS3 be used for graphic for printing?

I am very familiar with FW but I do not like Photoshop,
however I have both I preffer to use FW. As I have seen on one
presentation new FW CS3 has CMYK pallete so my question is: can FW
CS3 be used for preparation of graphic for printing or what are the
obstacles? After preparing images in FW I will use InDesign for
text or maybe the text in FW is wector and maybe I could use FW
including text and not to use INDEsign far small projects? Does
anyone has any experience with this subject?
Regards
Martin

qnnick wrote:
> I am very familiar with FW but I do not like Photoshop,
however I have both I
> preffer to use FW. As I have seen on one presentation
new FW CS3 has CMYK
> pallete so my question is: can FW CS3 be used for
preparation of graphic for
> printing or what are the obstacles?
Fireworks does not operate or export in CMYK color space. It
was
developed for screen images only, and operates and exports in
RGB color
space. It is not recommended that you use it in preparation
of images
for print. You mentioned that you don't like photoshop. You
might like
Illustrator better.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Can the WLPI be used for a perl web site

Similar Messages

Maybe you are looking for