Can we access a webservice registered to OWSM gateway using java client

Hi all,
Can we access a webservice registered to owsm gateway using a java client.
Thank you.

Using com.oracle.bpel.client.Locator to obtain a connection to the BPEL PM.
how can we invoke a web service if it is registered with OWSM is there any java api
to do this.
What are the possible ways we can invoke a web service registered to OWSM?

Similar Messages

Hi, I have imac mac os 10.6.7, I can't access to internet with my ipod touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

Hi,
I have imac mac os 10.6.7, I can't access to internet with my ipod touch using my imac airport...what's wrong? my ipod tells me is connected and airport is active...so? what should I do?

right, figured it out. had to put it in disk mode, then reconnect, then it was recognized, then i restored and put everything back onto it. hope this helps anyone else who has a similar problem

Can someone access my email through iCloud if they used to have access to my email?

Can someone access my email through iCloud if they used to have access to my email?

Your question is not clear. If it is a Yahoo email account, then where does iCloud come into the picture? Or do you mean you are using the yahoo.com email address as your Apple ID? These are entirely different things. The Yahoo email account is not in any way related to the Apple ID that is using that email address as the Apple ID.
Cheers,
GB

Can i access my photos saved on time capsule using my pad via my home wifi?

Can i access my photos saved on time capsule using my pad via my home wifi? I would like to edit my pictures on my ipad instead of my mac mini and have them stored on my time capsule.

Sad that people steal stuff.. and..
Sorry but there is no way windows can recover a TM backup. You have to use another Mac.
TM is uniquely Mac.

Access to installed device drivers on windows using Java?

Is it possible to get access to installed device drivers on windows using java.

Java has APIs for accessing the OS, The OS has APIs for accessing devices.
Java does not have APIs for direct access to devices.
However, depending on the device, you get what you want most of the time. You would only access the device directly if the device isn't supported by the OS or Java directly.
Which device do you have in mind?

How can i access process webservice in enterprise

Hi,
I have a bpm process(webserviceBPM) which is exposed as webservice, deployed project in studio embeded engine. I can access the wsdl file at http://localhost:9000/albpmServices/webserviceBPM/ws.
Exported the same project and deployed the exp file in enterprise standalone with smart publish option. Now my bpm process is working fine but how can i access the wsdl file of the deployed process?
Please suggest me the way to access the wsdl.
Regards.

Hi,
This seems to be a recurring question across this forum. Please somebody from Oracle update the Doc team to include these details in the latest release.
You can find the solution at this forum .Check for the last but one post.
To launch Oracle BPM deployed Web Services [In BPM Enterprise]
Rudraksh
Edited by: rudraksh on Jul 30, 2009 10:46 AM

How can you access the printer settings in CS5 when using Epson 4900?

How can you access the printer settings when using Epson 4900 with CS5 12.1 x 64

Open the print dialog box, click "print settings".

Can we access the session scoped variable by simply using its name

The Java EE 6 Tutorial contains a "Duke's Bookstore Case Study Example”. I could not understand following statements of this case study:
*bookdetails.xhtml*
{code}
<h:outputText value="#{selected.title}"/>
{code}
*BookstoreBean.java*
{code}
public String details() {
context()
.getExternalContext()
.getSessionMap()
.put(
"selected",
getFeatured());
return ("bookdetails");
{code}
I want to know can we access the session scoped variable in bookdetails.xhtml by simply using its name as done above?

It is basic Expression Language (EL) functionality, it isn't even specific to JSF. And it isn't specific to the session scope either, you can put beans in any scope (page, request, session, application, flash, conversation, whatever custom scope you create) and reference it using EL by only its name. The thing that you have to take care of is that the bean lives in SOME scope, which can be achieved using JSF specific annotations or configuration files, through CDI or by manually putting the bean in a specific scope through Java code. It's flexible, which is the nature of the Java platform.

Can not Access disk drive attached to WRT350N via an FTP client

Background
I have a WRT350N v1 running the most current firmware. I have a static IP address for the WRT350N and I can ping it over the internet. I have a disk drive attached to the 350N with a FAT32 partition that has been set up for shared access for a selected group and user. I have worked with cicso/linksys support to verify the linksys350N is set up correctly (?).
Problem
I can not access the disk drive attached to the WRT350N via an FTP client. I have tried the following FTP Clients: Transmit and Filezilla. I get a "Connection established, waiting for welcome message...' message on the FTP client. Then it says Connect timeout, Can not connect to server. I CAN connect to other FTP sites so its not the FTP client software.
What I have done so far
1. deleted the old and added a new FTP group and user
2. unplugged and reconnected my WRT350N and my cable modem
3. Contacted Cisco/linksys support on-line and they verified my setup and can ping my 350N but thats as far as they are willing to help
I haven' a clue as to what to do next. Any and all help is greatly appreciated.

Access your router set-up and make sure you have :
1. Enabled FTP Server and Internet Access under the FTP Server subtab under Storage...
2. Reduced the MTU size to 1300 under SetUp...
3. Unchecked Filter Anonymous Internet Requests...
If you have done all this and nothing works, then, you need to upgrade your router's firmware and re-configure your router and then enter the settings...
Download Firmware 3.23 MB...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
1. Enable FTP Server and Internet Access under the FTP Server subtab under Storage...
2. Reduce the MTU size to 1300 under SetUp...3. Uncheck Filter Anonymous Internet Requests...See if this works for you...

I can't access time capsule HD after start to use osx mavericks!

hello,
I used to keep some files on my time capsule HD, as an external HD, since osx leopard. But now i'm using osx MAVERICKS I still use time machine back ups in my time capsule, but now I can't access my other files on time capsule HD.
Please Help me!

Try manually mounting the TC.. Mavericks has this thing where it hates TC.
In Finder.. Go, Connect to server.
Type in the TC network name or IP.
AFP://TCNetworkName or IP
You need to understand network name is different to if you used illegal characters or spaces when you named the TC.
So
Raphael's Apple Time Capsule becomes
Raphaels-Apple-Time-Capsule
Once you have the correct name the OS will ask for the password. by default it is public.. type in YOUR password.. or public and save it to your keychain.
The hard disk should then mount.
I strongly recommend using fully legal names for TC and wireless..
Short,, 2-20 characters
No spaces.
Pure alphanumeric.

How can I access to an EJB from a JSP, using a taglib?

I'm trying to access to an EJB from a JSP using a taglib,
          and I get the example in
          http://java.sun.com/j2ee/j2sdkee/techdocs/guides/ejb/html/Advanced5.html.
          But I colund't run this example because in the weblogic Log appears many
          errors when I run the JSP.
          Can you help me?


Backing files is an option. If you need to do it from the controller, you
could use the Forward object. The forward object constructor can take a URL
object as a parameter. This should do the trick.
Regards,
Kunal
"Panji Aryaputra" <[email protected]> wrote in message
news:[email protected]..
Hi, you have to use backing file to get what you want. In my case, I am
using a page backing file. Perhaps a portlet backing file can do thatalso.
Cmiiw, the redirect header makes the page redirected only if the httpheader
has not been sent to client. In your case, the header has been sent (i.e.
the portal header.jsp has been displayed, etc). So the header need to be
sent before anything else sent to client browser. This is where thebacking
file comes handy.
hth
panji.a
"A Hagen" <[email protected]> wrote in message
news:[email protected]..
I'm using Bea Workshop 8.1 and trying to perform a redirect from inside
a
portlet
using HTTPServletResponse.sendRedirect(String url)... but nothing
happens
I tryed the same trick with a simple JSP, and that's ok, but portal
pages
obviously
catch the redirect somehow.
Please could you tell the correct way of redirecting the whole browser
to
another
page from inside portlets?
Thanks!!!

Can't access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser no

When I try to access adobe from my smart phone to use my form created in formscentral I receive an error message that says "unsupported browser". There is a link to download a supported browser but the link directs me to another page that says "browser not supported at this time". This happened to me while using my IPhone 5, a friend that uses an IPhone 6, and another friend that uses a Samsung Galaxy S5. I just need for my employees to be able to access, complete and submit work orders created in formscentral from their phones. I would like to use the data collection feature in formscentral but at this point any suggestions on how to accomplish this are welcomed. Thank you

Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support.

How to call webservice using java client

Hi,
I am new to webservice related stuff.Can any body help me.
How can i call the webservice using simple java programing using jdeveloper tool is very useful for me.
Thanks
venuj

user10394151 wrote:
Hi,
I am new to webservice related stuff.Can any body help me.
How can i call the webservice using simple java programing using jdeveloper tool is very useful for me.
Thanks
venujTry this simple webservice client.
You will need apache-axis.jar in your classpath. The following client is apache axis based. A similiar client can be built also using the JAX-WS only[without apache-axis.jar].
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class WEBSERVICE_CLIENT{
public static void main(String [] args) {
try {
String endpoint ="<YOUR WS ENDPOINT>";
        Service service = new Service();
        Call     call    = (Call) service.createCall();
        // YOU CAN SET VARIOUS PROPERTIES IN THE "CALL" OBJECT...LIKE
        // USERNAME,PASSWORD,PROPERTIES OF HTTP HEADER. SEE "CALL" OBJECT'S API FOR MORE PROPERTIES.
        call.setTargetEndpointAddress( new java.net.URL(endpoint) );
        call.setOperationName(new QName("<YOUR WS SERVICE NAMESPACE>", "<WS SERVICE TO BE INVOKED>"));
        String msg = (String) call.invoke( new Object[] { "data" } );
        System.out.println("RETURNED MESSAGE : "+msg);
      } catch (Exception e) {
        System.err.println(e.toString());
}

How can I access my movies from my iTunes account using my iPad.

I thought that when you accessed iTunes from your iPad, using iOS5 you could access all of your iTunes like you did on your PC. However I can get my music but not movies. Please can someone help me. I am new to the apple game.
Thank you
Apple grove

Not sure if there is a way to "un-sync" per-say... But you can factory reset your device, and then set it up with your new MB Air.
DOING A FACTORY RESET WILL WIPE ALL DATA ON YOUR PHONE!!! So make sure you have it backed up to your old computer first!
But before you do this, when you plug your Phone into your computer, I think iTunes should give you a choice to sync with your new computer. If this "dialog box" or "choice" doesn't pop up when you plug your Phone in, THEN do the factory reset.

How can I access the Oracle CEP from the a simple java code

I want to access the current values in coherence cache and show those in a screen. So for that I want to create a java class which can access the Coherence cache of the CEP application and get the current values in the Cache.
Do anyone had any sample code for this, or any idea how to do this.

As mentioned, you can use Spring to pass a reference to your cache to an event bean as shown below.
Once you have a reference to the cache you can use whatever Coherence APIs you need.
For example: get an object based on the key, perform an invoke, or a query to get the values that you want to display.
Here's some sample code:
IN EPN
<wlevs:caching-system id="CoherenceCachingSystem" provider="coherence" />
<wlevs:cache id="TransactionCache" caching-system="CoherenceCachingSystem"
          value-type="TransactionAmount" key-class="com.oracle.poc.event.TransactionAmountKey">
</wlevs:cache>
<wlevs:event-bean id="TransactionCacheQuery" class="com.oracle.cep.eventbeans.TransactionCacheQuery">
     <wlevs:listener ref="P1TotalChannel" />
     <wlevs:instance-property name="transactionCache" ref="TransactionCache" />
</wlevs:event-bean>
EVENT BEAN:
import com.tangosol.net.NamedCache;
import com.tangosol.util.aggregator.DoubleSum;
import com.tangosol.util.filter.EqualsFilter;
public class TransactionCacheQuery implements StreamSource, StreamSink {
     private StreamSender streamSender_;
     @SuppressWarnings("unchecked")
     private Map transactionCache;
     @SuppressWarnings("unchecked")
     public void setTransactionCache(Map transactionCache) {
          this.transactionCache = transactionCache;
     public void setEventSender(StreamSender sender) {
          streamSender_ = sender;
     public void onInsertEvent(Object event) throws EventRejectedException {
          if (event != null){
               if (event instanceof MyEvent){
                    MyEvent my = (MyEvent)event ;
                    NamedCache cache = (NamedCache)transactionCache ;
                    Object totalAmount = cache.aggregate(
                              new EqualsFilter("getACCT_NUMBER", my.getACCT_NUMBER()),
                              new DoubleSum("getAmount"));
                    double transactionsTotal = 0.00 ;
                    if (totalAmount instanceof Double){
                         transactionsTotal = ((Double)totalAmount).doubleValue();
                    my.setTransactionsTotal(transactionsTotal);
                    // send new event to the processor
                    streamSender_.sendInsertEvent(my);
}

Can we access a webservice registered to OWSM gateway using java client

Similar Messages

Maybe you are looking for