Can we do a recording for ABZON transaction?

Hi,
We are using transaction ABZON for creating 'new asset' for uploading data using LSMW recording method.
We are getting an error "leave transaction not possible for batch input" when we are try to upload more than one record from the file.
The LSMW works fine for one record but goes in error for more than one record. If any one has come across this issue pls let me know asap. Also if there is any alternative way bapi/FM pls let us know.
Thanks in advance,
Simmi

Hi simmi,
Use BAPI for creation of Assets, pass the data to the structures of BAPI.
CALL FUNCTION 'BAPI_FIXEDASSET_CREATE'
     exporting
       COMPANYCODE = COMPANYCODE
       ASSET = ASSET
       SUBNUMBER = SUBNUMBER
       REFERENCE = REFERENCE
       CREATESUBNUMBER = CREATESUBNUMBER
       GENERALDATA = GENERALDATA
       GENERALDATAX = GENERALDATAX
       INVENTORY = INVENTORY
       INVENTORYX = INVENTORYX
       POSTINGINFORMATION = POSTINGINFORMATION
        POSTINGINFORMATIONX = POSTINGINFORMATIONX
       TIMEDEPENDENTDATA = TIMEDEPENDENTDATA
       TIMEDEPENDENTDATAX = TIMEDEPENDENTDATAX
       ALLOCATIONS = ALLOCATIONS
       ALLOCATIONSX = ALLOCATIONSX
       ORIGIN = ORIGIN
       ORIGINX = ORIGINX
     INVESTACCTASSIGNMNT = INVESTACCTASSIGNMNT
     INVESTACCTASSIGNMNTX = IVESTACCTASSIGNMNTX
         NETWORTHVALUATION = NETWORTHVALUATION
         NETWORTHVALUATIONX = NETWORTHVALUATIONX
         REALESTATE = REALESTATE
         REALESTATEX = REALESTATEX
         INSURANCE = INSURANCE
         INSURANCEX = INSURANCEX
         LEASING = LEASING
         LEASINGX = LEASINGX
       importing
         ASSETCREATED = ASSETCREATED
         RETURN = RETURN
       tables
         DEPRECIATIONAREAS = DEPRECIATIONAREAS
         DEPRECIATIONAREASX = DEPRECIATIONAREASX
         EXTENSIONIN = EXTENSIONIN
       exceptions
         OTHERS = 1

Similar Messages

BDC Recording for 3 transactions in SD

i need to cancel contracts using these transaction sequentialy i.e VF46 VF11and VF42 using bdc .how to go about it in recording for 3 transactions
regards
shankar

Hi try this,
Call one BDC after the another, Like if u want to create a sales order and then correspondingly display it as well, u can capture the sales order created afer ur first BDC theu the messages mostly in SYMSGV1 and using this u can do a call txn skip first screne of VA03.
If u are talking about session, get 2 session names and move them to different sessions or if both txn are dependant on each other, move it one after the other thru call txn. It is the same, howmany ever trx u wabnt to post thru BDC.
OR
After your call transaction stmnt, check for sy-subrc = 0 and refresh bdc internal table.
Populate the bdc internal table for the new trxn and then call the trxn using call transaction stmnt.

BDC Recording for cm07 Transaction

Hi Everyone,
I'm doing BDC recording for CM07 transaction. In Recording, i need to give a print command by specifying the spool title.
For this, after opening the print window, i need to click the 'properties' button, and then select the spool title and input the value.
But I'm unable to do the recording of this print dialog box. The recording ends as soon as I give the print command.
Can anyone please tell me the solution to it.
Thanks and Regards
Rishika bawa

Hi,
See via transaction SHDB:
SAPLCORU_S     0100     X
BDC_OKCODE     BU
                                                       AFRUD-RUECK     0000000000
                                                       AFRUD-AUFNR     100051152
                                                       AFRUD-VORNR     0010
                                                       AFRUD-LMNGA     100,000
                                                       AFRUD-MEINH     PC
                                                       AFRUD-XMNGA     2,000
                                                       AFRUD-ISM01     200
                                                       AFRUD-ILE01     PC
The table for confirmations is AFRU.
Best regards,
Leandro Mengue

How can i config Oracle Services for Microsoft Transaction Server in 9.2

how can i config Oracle Services for Microsoft Transaction Server in 9.2

There's nothing to configure on the client side. On the database side you just need to run a script once to setup an ORAMTS admin account and some other infrastructure.

Batch Input / Recording for EnjoySAP transaction

Hi Experts,
May I know any possibility for us to do recording/batch input processing for EnjoySAP transaction ??
Nowadays I need to do Recording for ME29N, as ME28 have some problem on release some of the PO document, so may I know any tool that I might can use?
Thanks
Cheers,
Isaac.

Hi Issac,
Suggest you to<b> Search in SDN with key - eCATT</b>
Will get few more useful related Posts.
Check
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Part I - eCATT An Introduction
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
Part II - eCATT Scripts Creation - TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Part III - eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Part IV - eCATT Chaining, Parameterization, Creation Of Test Data,Test Configuration, System Data /people/sapna.modi/blog/2006/04/18/ecatt-chaining-parameterization-creation-of-test-datatest-configuration-system-data-part-iv
Part V - eCATT Scripts Management Via Test Workbench
/people/sapna.modi/blog/2006/04/13/ecatt-scripts-management-via-test-workbench-part-v
Part VI - eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
Reward points if this Helps.
Manish
Message was edited by:
Manish Kumar

ACH File addenda record for IAT transactions

Hello Experts,
While generatin the DME file for IAT payment method my addenda records are coming as 0000 while they should be either of 7,8 or 9. Not sure the cause of this. In this regard I seek your suggestion whether there are certain configurations I may be missing.
Thanks in advance for the help.
Anindya

Hi Fernando,
Thank you very much for your suggestion of not using the function module FI_PAYMEDIUM_ACH_DETAILS for the generation of the payment DME file. In this regard is it possible to kindly suggest why we should not use the function module for file generation although it is one of the configuration steps specifically mentioned in the SAP Note 1343600. I have given full points for your help in this thread.
May I ask a little more favor from your end. There are two small errors which is appearing in the DME file :
1. Record type 7 u2013 Addenda Type 17 (IAT Addenda record for Remittance Information) : There are two line items of record 717 which is appearing in the message. According to the IAT file format a maximum of two IAT adenda records is permissible to accompany an IAT entry. So I dont think this is an error. The bank has come back and said that they need only one line item. Is this change possible with the existing note or there needs to be a code change regarding this.
2. Record type 7 u2013 Addenda Type 18 (IAT Addenda Record for Foreign Correspondent Bank Information) : This line item should have all the information for the Foreign Corresponding Bank Information. This entire line item is not getting populated in my file as it is explicitly mentioned that the information applies only to Incoming / Received IAT entries only. As my file is a vendor payment it is an Outgoing file and thus rightly it is blank. But the bank has come back saying that these files should get populated. Is the Bank correct on this or is my understanding right.
It will be of great help if you can kindly throw some light on these two cases which will truly help me finalize the DME file.
Thanks a ton for all the help.
Have a nice day.
Thanks and regards
Anindya

Can i use java only for database transaction with vb as a front end

Hello All.
I am sorry,i don't know whether this location is the correct location to post my question or not
I have developed one application using complete vb only. That is completly desktop appliation and not suitable for centralized database. Is there any facility to keep my front end as same (vb application) and for the database transaction can i use jdbc? Is there any possibility to do that like View is vb based application and the database connectivity is only jdbc
If my thought is wrongplease execuse me.
thanks in advance
sowjanya

Sounds like a really bad choice even if it was possible.

In CATS Can We Change the Records For After Approval?

Hi To all,
Emp record his timings in CAT2 and the approval has given by related Mgr.After that he dont want that record .Can we make it empty that one.Is it possiable?

Hi Sekhar Uma,
Go to T-Code CAC1 and remove the check mark from No change after approval Tab.
This way your entered time will not become gray and you will be able to change.
I hope this helps.
Let me know.
Arti

How can I get delta records for Generic Delta

Hi BW Gurus,
I am using Generic Extractor using View from CATSDB and CATSCO talbes. At the time of modifying and changing records I am unable to get those records in BW despite enabling delta in RSO2 screen. I am able to view those modified and added records in R/3 in tables. Plz help me how I get those records to BW.

hi,
After we loaded all the historical data uing full upadate . Implemenattion process is over , But we will have the Transaction data that will raise daily , So we have to store that New / changed data in Delta q , And extract them each day by Delta Update
So we will create an Info packege with the update mode as Delta , And schedule them when to start extraction , So we create the process chain uisng RSPC by giving the Info packege name . And extract the Detla daily as per schedule .
award pts if helpful..

Multiple records for a single transaction - Issue in LSMW

Hi,
i'm facing a issue in LSMW
i have the data coming up in the flat file. the data which constitutes the single transaction consists of data from multiple records from the flat file..
suppose we have 10 records in the flat file... and all the 10 records related to ony 2 transactions i.e say 6 records to first transaction and next 4 records to next transaction.
we have a direct input method to handle this data like field1 for first record, field2 for 2nd record and so on...
while uploading, we will get all the records one by one into our source structure. My question is can we handle this scenario in lsmw? if yes, pls suggest
Thanks in advance
Shekhar

Hi Kris,
this is regarding the asset creation via AS01..
we are getting the flat file in that way. Lets assume like this:
suppose for one transaction we may need to fill 5 depreciation keys and for another option only 3 dep. keys we need to fill.
then in the flat file, we can get like 5 records for first transaction i.e asset and 3 records for 2nd transaction
Can we handle this via lsmw
Regards
shekhar

In call transaction how can we handle error records.

hai..tellme how can we handle error records in call transaction..we can get error records into one flatfile ok...then we have to execute the same bdc program with dat flat file (error records) once again...is it wright ..

Hi,
check this program u will get idea
seee this prog. its will help u .
copy and run this prog.
TYPES : BEGIN OF t_disp ,
vendorno(9),
compcc(13),
purchorg(14),
accgroup(15),
title(7),
name(5),
country(8),
ordcurr(14),
END OF t_disp.
TYPES : BEGIN OF t_err,
msgtyp LIKE bdcmsgcoll-msgtyp,
l_mstring(250),
END OF t_err.
DATA: i_disp TYPE STANDARD TABLE OF t_disp,
wa_disp TYPE t_disp,
i_err TYPE STANDARD TABLE OF t_err,
wa_err TYPE t_err.
data definition
Batchinputdata of single transaction
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
messages of call transaction
DATA: messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
error session opened (' ' or 'X')
DATA: e_group_opened.
message texts
TABLES: t100.
PARAMETER : p_file1 LIKE ibipparms-path,
p_cmode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
*selction screen.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file1.
AT SELECTION-SCREEN ON p_file1.
IF p_file1 IS INITIAL.
MESSAGE 'FILE IS NOT FOUND' TYPE 'E'.
ENDIF.
START-OF-SELECTION.
PERFORM f_disp_file1.
END-OF-SELECTION.
PERFORM f_disp_errs.
*& Form F_DISP_FILE1
text
--> p1 text
<-- p2 text
FORM f_disp_file1 .
DATA: l_filename1 TYPE string.
MOVE p_file1 TO l_filename1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = l_filename1
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_disp
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*? prepare BDC data
DELETE i_disp INDEX 1.
LOOP AT i_disp INTO wa_disp .
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_disp-vendorno.
'ztest_1'.
PERFORM bdc_field USING 'RF02K-BUKRS'
wa_disp-compcc.
'0001'.
PERFORM bdc_field USING 'RF02K-EKORG'
wa_disp-purchorg.
'0001'.
PERFORM bdc_field USING 'RF02K-KTOKK'
wa_disp-accgroup.
'0001'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-SPRAS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_field USING 'LFA1-ANRED'
wa_disp-title.
'Mr.'.
PERFORM bdc_field USING 'LFA1-NAME1'
wa_disp-name.
'test name'.
PERFORM bdc_field USING 'LFA1-SORTL'
'TEST NAME'.
PERFORM bdc_field USING 'LFA1-LAND1'
wa_disp-country.
'in'.
PERFORM bdc_field USING 'LFA1-SPRAS'
'en'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-AKONT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=VW'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'LFM1-WAERS'
wa_disp-ordcurr.
'inr'.
PERFORM bdc_transaction USING 'XK01'.
WRITE:/ WA_DISP-VendorNo,
WA_DISP-COMPCC,
WA_DISP-PURCHORG,
WA_DISP-ACCGROUP,
WA_DISP-title,
WA_DISP-name,
WA_DISP-country,
WA_DISP-ORDCURR.
CLEAR: wa_disp.
REFRESH bdcdata.
ENDLOOP.
ENDFORM. " F_DISP_FILE1
Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF FVAL NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form bdc_transaction
text
-->P_0322 text
FORM bdc_transaction USING tcode.
DATA: l_mstring(480),
l_subrc LIKE sy-subrc.
REFRESH messtab.
CALL TRANSACTION tcode USING bdcdata
MODE p_cmode
UPDATE 'L'
MESSAGES INTO messtab.
l_subrc = sy-subrc.
IF SMALLLOG 'X'.
WRITE: / 'CALL_TRANSACTION',
TCODE,
'returncode:'(I05),
L_SUBRC,
'RECORD:',
SY-INDEX.
LOOP AT messtab.
SELECT SINGLE * FROM t100 WHERE sprsl = messtab-msgspra
AND arbgb = messtab-msgid
AND msgnr = messtab-msgnr.
IF sy-subrc = 0.
l_mstring = t100-text.
IF l_mstring CS '&1'.
REPLACE '&1' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&2' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&3' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&4' WITH messtab-msgv4 INTO l_mstring.
ELSE.
REPLACE '&' WITH messtab-msgv1 INTO l_mstring.
REPLACE '&' WITH messtab-msgv2 INTO l_mstring.
REPLACE '&' WITH messtab-msgv3 INTO l_mstring.
REPLACE '&' WITH messtab-msgv4 INTO l_mstring.
ENDIF.
CONDENSE l_mstring.
WRITE: / messtab-msgtyp, l_mstring(250).
*? Send this errors to err internal table
wa_err-msgtyp = messtab-msgtyp.
wa_err-l_mstring = l_mstring.
APPEND wa_err TO i_err.
ELSE.
WRITE: / messtab.
ENDIF.
CLEAR: messtab, wa_err.
ENDLOOP.
SKIP.
ENDIF.
ENDFORM. " bdc_transaction
*& Form f_disp_errs
text
--> p1 text
<-- p2 text
FORM f_disp_errs .
SORT i_err BY msgtyp.
LOOP AT i_err INTO wa_err.
AT FIRST.
WRITE : / text-002.
ULINE.
ENDAT.
AT NEW msgtyp.
IF wa_err-msgtyp = 'S'.
WRITE : / text-003.
ULINE.
ELSEIF wa_err-msgtyp = 'E'.
WRITE : / text-001.
ULINE.
ENDIF.
ENDAT.
WRITE : / wa_err-msgtyp, wa_err-l_mstring.
CLEAR wa_err.
ENDLOOP.
ENDFORM. " f_disp_errs
Regards

The condition record for use B can not be displayed

Hi gururs,
What does this message (number : VE896 ) mean ?
How to make it desapear ?
P.S : it's about output type for purchase orders.
This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
Regards,
Bahia.

Hi
It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
Thanks

0 records for particular business transaction type in 0CRM_SALES_ACT_1 extr

Hi experts,
I have 2 custom defined Business transaction types in CRM called ZPFS & ZFSR, transactions for these types comes under sales activity module of CRM. Data is available for both the trans types but when I try to extract data for them using 0CRM_SALES_ACT_1, always 0 record comes.
I have checked other business trans types from the same data source and data is coming for all of them. I tried to execute extractor in debug mode but NOT ABLE TO UNDERSTAND the code. Please help me in this regard.
Regards,
Priyanka Joshi

Hi,
I am having the same problem for 0CRM_SALES_ACT_1 datasource. Not able to get records for certain transaction type corresponding to interaction records. Can you please let me know if this has been resolved and how?
Thanks
Pooja

Can't enable recording for Audio tracks with H2 Zoom

I'm running Logic Express 7 on a Macbook Pro Intel.
I used to record vocals with the H2 Zoom as an external mic. But since I ran an update on Logic, I can no longer enable recording for Audio tracks for recording as soon as I connect the H2.
Interestingly, it let's me only choose an H2 output driver.
Connecting the same device to Garageband I can choose both, H2 output driver and H2 input driver.
Anyone else facing this problem? Advice is greatly appreciated.

You have to set it up using the aggregate device editor (utilities folder). In the utilities folder open AUDIO MIDI setup. From the menu select Audio>Open Aggregate device editor. Add a new aggregate device and name it zoom. Selelct H2 auidio in and H2 Audio out. Check the clock next to H2 Audio out only. Make the Zoom aggregate device you just created your default input in the systems setting area of the audio midi setup form. Close Audio Midi Setup and return to Logic. You may need to restart logic. You should now see "Zoom" in Preferences>Audio> Core audio> Device and you should be able to record using the H2.
Hope this helps

Current day EBS - memo record for status BAI codes

Hello all,
My client has a requirement of uploading current day EBS statement (only 1 file at the start of the day). I believe that FF.5 will allow the upload of this statement and then we can use transaction FPS3 to select the particular records so as to create Memo records in Cash Management. Can anyone guide me if we can also create memo records for the 'status' BAI codes from this statement. Example- creating memo records for BAI code '040' - Opening available, '060' Closing available, etc. These status BAI codes are part of '03' record type in the current day bank statement. Any help or sharing of your experience on this will be very helpful.

Satyen,
For creating Memo records for the status BAI codes like 040-Opening available, 100-Total Credits, 400-Total Debits, etc., you will have to create a pre-processor program. This will rewrite the original bank statement received from the bank and create 16 records for these status BAI codes.
For e.g. the 03 record in one account looks as follows in the file received from the bank.
03,99999538,USD,010,82499230,,,015,82499230,,,030,82499230,,,/
The preprocessor program will rewrite this as follows:
03,99999538,USD,,,,/
16,010,82499230,,,/
16,015,82499230,,,/
16,030,82499230,,,/
and so on.
Then this rewritten BAI file is uploaded into SAP using FF_5. Then you can go into FPS3 and create memo records for these status codes.
I have been using this method with lot of success.
If anyone has different suggestion that would help me too.
Kalyan

Can we do a recording for ABZON transaction?

Similar Messages

Maybe you are looking for