Can we pass delimeted file through PI without converting it to XML ?
Hi All,
I will be getting File from Sender in Inbound Payload as delimitted file and not in XML structure using XI adapter. So can you please suggest on how I need to do mapping as file will be passed as it is and which need to transfer from Sender to Target system.
Target side I will be using file adapter to put the file at desired location and as inbound file is not in XML and directly delimetted file there is no need of File Content Conversion too. Please suggest as I am unable to visualise How mapping needs to be done in case of direct passing of delimitted file from Sender to Targeget throgh PI i.e. inbound payload and outbound payload both contains delimitted file field separated by pipe "|".
Your valuable inputs will be highly appreciated.
Regards,
Nitin Patil
Hi Nitin Patil ,
No need to do mapping in ESR/IR . No FCC also
Do as follows
1. Create a namespace in ESR/IR only .
2. Directly go to ID - configuration
3. In interface determination give some dummy name for inbound interface .
Note : Use the propoer namespace which you have created in ESR/IR
4 Create sender and receiver FIle adapter - use the same dummy interface name
5. Create sender and receiver agreement
Your file will be picked and droped to desired folder as it is.
But you ignore the errors in SXMB_MONI .
Regards.,
V.Rangarajan
Similar Messages
-
How to send image file through mail without any attachment
Plz tell me how to send image file through mail without any attachment ( i mean not converting that image into pdf or any format ) i want to send that text or image through mail .
Hi Sandeep,
I think you can setup the type of email in Shared office Settings in transaction S016.
There is an option called <Preset document classes>
You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
Haven't tried it though.
Regards,
Siddhesh -
Dear ladies and gentlemen!
I recently received on my notebook, operating system 8.1, the message "Adobe Acrobat is no longer working properly". I also found myself that I can copy from einerPDF file excerpts not without problems in another document. My Adobe Acrobat 9 Pro has released version 9.0.0. Two updates this version is not listed. Please inform me how I can fix this problem.
Sincerely, Walter Hacksteiner
mailto: [email protected]The first thing I would try is to update Acrobat 9 to the latest version 9.5.5
The next thing would be to run Acrobat 9 in Windows 7 or Vista or XP Compatibility Mode. -
I can't see pdf files through safari
i can not see pdf files through safari
I had the same problem after making Adobe the reader for pdf. Fixed it by
1) removing the Adobe plug-in from the Internet Plug-Ins file in the Library.
2) restarting Safari.
Back to normal.
Bob -
I am trying to write external c++ code that will read a file already opened by Labview and therefore assigned a refnum. (Unfortunately, I definately can't use the standard Labview vis.) However I am not sure what c++ type to use in order to manage the refnum.
All help and thoughts appreciated. Thanks,
JoannaYou could do ALL your file handling in C or C++ (MFC CFile for
example) and pass Microsoft file handles into and out of LabVIEW
instead of LabVIEW file references into and out of C. This may be an
easier way to attack the problem.
You could create a DLL in MSVC that exports a FileOpen function, a
FileClose function and a FileRead and/or FileWrite Function and then
call that DLL from place to place as required in your code.
It would help us if you would explain what kind of data you are trying
to read or write and what the application is. Is it binary data?
text files? Do you need some special Win32 file system feature like
file mapped memory? I guess what I am asking is what is your
motivation for doing file handling in C or C++?
Douglas De Clue
LabVIEW developer
[email protected]
"Rolf" wrote in message news:...
> A LabVIEW file refnum is an internal Magic Cookie to LabVIEW and there is no
> way to directly extract the actual information assigned to that Magic
> Cookie.
> However the CIN Reference Manual describes one function which allows to
> retrieve a lower level "File" handle and at least on Windows 32 bit and
> LabVIEW
> from version 5 up to and including 6.1 this "File" LabVIEW datatype directly
> maps
> to the Win32 API "FILE" Handle.
>
> The function to use is
>
> MgErr FRefNumToFD(LVRefNum refNum, File *fdp);
>
> It is declared in extcode.h or one of its dependant headers and exported
> from "labview.lib"
> all located in the cintools directory and you can link this lib also to a
> normal DLL project.
> However calling this DLL then from any other process than LabVIEW or a
> LabVIEW
> executable will not initialize the DLL anymore correctly.
>
> Your best option if you need to write in C(++) should be to use the LabVIEW
> file manager
> functions described on the External Code Manual (manual/lvexcode.pdf) on
> this File handle.
> If you need to use directly some Win32 API functions with it please note
> that although currently
> the "File" in the LabVIEW file manager functions matches the FILE in Windows
> 32 bit API
> functions this is an undocumented and hence unsupported feature. The next
> LabVIEW version
> may actually use a different datatype for its "File" parameter to the
> LabVIEW file manager calls
> and your use of assuming File == FILE may simply crash.
>
> Also operating on a file refnum in LabVIEW which has been accessed directly
> with Win API
> functions may result in strange behaviour such as the file read/write mark
> not being updated as
> you would maybe expect it.
>
> "Jo" wrote in message
> news:50650000000800000016520000-1023576873000@exchange.ni.com...
> > How can I pass a file refnum into and out of external c++ code? What
> > type does it convert to in c++?
> >
> > I am trying to write external c++ code that will read a file already
> > opened by Labview and therefore assigned a refnum. (Unfortunately, I
> > definately can't use the standard Labview vis.) However I am not sure
> > what c++ type to use in order to manage the refnum.
> > All help and thoughts appreciated. Thanks,
> > Joanna -
Can we share music files through airdrop feature
Can we share music files through airdrop feature in upcoming ios 7 software
Unlikely, since this would be a violaton of copywright law.
-
I can't share any file through bluetooth other android device
sir, i can't share any file through bluthoot other android device?
no nor to other iphones it's not a bluetooth profile supported by ios bluetooth is a pretty broad std.
http://en.wikipedia.org/wiki/Bluetooth_profile -
Can you pass multiple files to Business Catalyst at the same time?
I need to pass information from a client. The infromation is split into several files. I can not access the files to combine them to send as one document to BC. Can I send the two files over even though they do not full fill the necessity of all the user information. File 1 is the personal information and has no other details. When this fill crosses over BC accepts with no trouble. When the second file goes across the personal information is not there but the form details are and this file wipesout the DB. Going through debug when the first file executes I see the data on the BC side. When the second file executes the data is all gone. I cannot combine both files to create one document. Files do not have the same number of users so import of file with file helper would not work since it needs to meet certain requirements to process correctly everytime. By combining the two files would give a different number of tabs than what file helper is looking for and by that matter the data may not be in the correct order. Retrieving the data from the file also would not work since I would have to retrieve from both files at the same time and there would be issues if the user does not occur on both files.
Please help.
Thank you,
CarlosWilderness08 wrote:
To save time with videos that are not critical, can you capture one video to Premiere Pro at the same time you are authoring to Encore a previously captured video?
The short answer is yes.
I have just done that and I am happy to report that it worked like a charm.
I captured from a DVCAM tape via firewire using PPro CS6 while authoring a Blu-ray disk in Encore CS6.
No frames were lost during capture and my test blu-ray project was completed without a hitch. -
Can we create .CSV files through documaker
Hi,
Is it possible to create .csv files through documaker apart from pdf's
ThanksWith apologies, it is still unclear (to me) what you are asking.
It is possible to create files using DAL, but to offer more specific guidance requires a better understanding of what it is that you want.
A CSV is a Comma-Separate Value file. A PDF file is a printed document file containing formatted text content, graphics, lines, boxes, etc - in other words a fully-composed document. I'm not exactly sure how a PDF and a CSV file could contain the same data.
Are you perhaps asking to get an index of the created PDF files written as a CSV file? Something that contains a row of key transaction data along with the file name of the generated PDF? Perhaps something akin to the batch (BCH) files that can be produced per transaction recipient?
Are you asking for an export file of all the field data that went into the creation of the document and included in the PDF? Normally a CSV has a header that describes the columns and then each row of data would be consistent with that header. Without knowing that every PDF file you create will have exactly the same number of fields defined, it is difficult to imagine that a single CSV file would be sufficient. And depending upon the number of fields and the size of the data assigned to each, this could be quite a long record per PDF in the resulting CSV file.
Or perhaps you had in mind to get a name / value pair written for each field with data written on separate lines? This would not a be a true CSV file, but could have the name and values separated by commas if that is what you require.
You have something specific in mind and yet, we are not in your mind. We need more specific information on exactly what you are trying to accomplish. -
Sockets: can only send once file through
Hi,
I am using sockets to send text and files to a client on a Clio. I want to send multiple files through. However, only the first file goes through. The rest are never received (although they are uploaded). My question is:
Why can not send anything through the socket (text or files) after the first file is sent?
The fileSend() is on the server side, fileReceive is on the client side.
public static void fileSend (Socket uploadSocket, String source) {
try {
InputStream inFile = new FileInputStream(source);
InputStream in = new BufferedInputStream(inFile);
OutputStream out = new BufferedOutputStream(uploadSocket.getOutputStream());
System.out.println("Sending " + source + ".");
int data;
int bytes = 0;
while ((data = in.read()) != -1) {
bytes++;
out.write(data);
bytes++;
out.write(data);
if (in != null) in.close();
if (out != null) out.flush();
System.out.println("Upload complete: " + bytes + " Bytes!");
catch (Exception e) {
System.err.println("Couldn't upload " + source + ": " + e.getMessage());
public static void fileReceive (Socket downloadSocket, String destination) {
try {
InputStream in = new BufferedInputStream(downloadSocket.getInputStream());
OutputStream outFile = new FileOutputStream(destination);
OutputStream out = new BufferedOutputStream(outFile);
System.out.println("Downloading data to " + destination + ".");
int data = in.read();
int bytes = 0;
while (data != -1) {
bytes++;
out.write(data);
data = in.read();
bytes++;
if (out != null) {
out.flush();
out.close();
outFile.close();
System.out.println("Download complete: " + bytes + " Bytes!");
in.skip(in.available());
catch (Exception e) {
System.err.println("Couldn't download " + destination + ": " + e.getMessage());
}Thanks,
NeetinI think its better to pass the outputstream to the filesend() method and inputstream to fileReceive() method
something like this:
OutputStream out = new BufferedOutputStream(uploadSocket.getOutputStream());
public static void fileSend (OutputStream os, String source) {
//write your file onto the output stream
InputStream in = new BufferedInputStream(downloadSocket.getInputStream());
public static void fileReceive (InputStream is) {
//Read from the input stream
}This should work.. Good luck -
How can I copy a file through a logon script with UAC enabled ?
Hello,
I have a batch that is copying a file to "%public%\desktop\" (windows 7) folder through a logon GPO (GPO from user configuration).
Everytime I try, I have an "access denied". I know it is because UAC and I don't want to disable it.
Through explorer.exe, I can copy this file with no problem with this same account.
How can I copy a file to such folder through group policy please ?
I dont want to use GPP as the script is used on WinXP too and I dont have the hotfix to support GPP on this operating systems.
Thank you> I have a batch that is copying a file to "%public%\desktop\" (windows 7)
> folder through a logon GPO (GPO from user configuration).
> Everytime I try, I have an "access denied". I know it is because UAC and
> I don't want to disable it.
Since you are copying to a non-user specific-directory, I'd recommend
using a startup script instead...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Can't play mp3 file through RTP
I created an server/client application to play remote file through RTP using JMF. However, it works with *.wav and video track of mpg file only, can't work when playing *.mp3 and audio track of mpg file. Do anyone know the reason?
No any errors.
I just follow the code sample "AVTransmit2" & "AVReceive2" and change the format.
I change the format of mpg file audio stream to G723, it works now! So I think I used wrong format, but I found there is only two supported RTP format for mp3 file and it doesn't work for both of them. -
I have a downloaded movie in .mp4 format an i success fully added it to itunes.
But before adding it to my ipad i have an .srt file subtitles which i would like to add it to the movie.
I want to add it to movie without converting the movie.
Can i copy the content of the subtitle file to the lyrics tab in get info option to make it work?Nevermind. In the iTunes Area I can drag and drop tunes onto the iTunes playlist I made, but NO I can't drag and drop to a synced list in the iPhone area of iTunes. Reason is that it only represents the list I sync to in iTunes.
I did download a Doug Script where I can add files from one play list to another which is neat. Donated some cash for it. -
Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
LeonardoNow I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format : AVI
Format/Info : Audio Video Interleave
File size : 63.5 MiB
Duration : 2mn 1s
Overall bit rate : 4 388 Kbps
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=3, N=15
Codec ID : H264
Duration : 2mn 1s
Bit rate mode : Variable
Bit rate : 4 248 Kbps
Maximum bit rate : 4 001 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.154
Stream size : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : FF
Duration : 2mn 1s
Bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Stream size : 1.85 MiB (3%)
Alignment : Aligned on interleaves
Interleave, duration : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format : AVI
Format/Info : Audio Video Interleave
File size : 69.3 MiB
Duration : 2mn 11s
Overall bit rate : 4 407 Kbps
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Format settings, GOP : M=3, N=15
Codec ID : H264
Duration : 2mn 11s
Bit rate mode : Variable
Bit rate : 4 267 Kbps
Maximum bit rate : 4 001 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.154
Stream size : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format version : Version 4
Format profile : LC
Format settings, SBR : No
Codec ID : FF
Duration : 2mn 11s
Bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Stream size : 2.01 MiB (3%)
Alignment : Split accross interleaves
Interleave, duration : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work. -
I click on the tool to convert my pdf file to a .doc file. When the program writes it is finished and I can down load the document, I do so. Even though the converted file is listed as a .doc or docx, neither Microsoft Word nor OpenOffice can open it. What is going wrong?
I also click to be able to edit my pdf document, but no commands to edit it come up. Am I doing something wrong?Hi ktewksbu,
I don't think you're doing anything wrong. What is the file size of the converted document (and the filename extension)? Do you have the same issue with any file that you try to convert? Or is the problem specific to one file?
As for editing a PDF file, that requires Acrobat. (Adobe Reader lets you comment on a PDF, but not alter its content).
Best,
Sara
Maybe you are looking for
-
Terminal command for tabs to open in same window
anyone know the terminal command to have all links open in tabs instead of a new window - why does mac call it tabs when it does not even actually work - any help would be great - i had the command and i deleted it......driving me nuts
-
Installation error message: TARGETDIR is undefined
I built the distribution package and it installs software fine on XP and W7 based systems. But under one PC with Windows Vista I got the next error message (pic 1) instead of offering to choose the installation directories (pic 2). Do you have any
-
Please provide the link to download WINDOWS 9 ISO
Hi All, Please provide the correct URL to download Windows 9 ISO?? Thanks, Prabha G
-
Is there a way to view the EXIF data of photos.. I'd like to be able to click on a photo and place it's location on a map as well.
-
My ipad was restored and i lock me out of it i dont know my email address and password
i lost my icloud infor to sign in but it wont tell me cuz it say that that email or the password wrong