Can we set a variable by assigning another variable to it

Hi,
Can we set a variable by assigning another variable to it. If not how can we implement this.
Thanks
Madhavi

Hi Sutirtha,
My requirement is
step1 set VARIABLE1
step2 set VARIABLE2 = #VARIABLE1
step3 using VARIABLE2 in Interface to filter data
Now the value of VARIABLE2 contains #VARIABLE1. its not fetching the value of #VARIABLE1 because of this it is giving an error in the interface like "Invalid character".
Please check the step2, is that syntax correct?
--thanxs
Madhavi

Similar Messages

How can I set a variable number of values in a SQL IN clause?

Hi,
How can I set a variable number of values in a SQL IN clause without having to change the text of the SQL statement each time?
I read the link http://radio.weblogs.com/0118231/2003/06/18.html. as steve wrote.
SELECT *
FROM EMP
WHERE ENAME IN (?)
But we need the steps not to create type in the system and would there be any other solution if we would like to use variable number of values in a SQL IN clause ?
We are using JDeveloper 10.1.3.2 with Oracle Database 10.1.3.2
Thanks
Raj

Hi,
can you please explain why the solution from steve is not the right solution for you.
regards
Peter

How can I set #HOST# variable referenced in the Chart template?

#HOST# and #HOST_PROTOCOL# are being set incorrectly by APEX from CGI variables when I create a chart. I am using APEX 4.1 and Oracle 11g. The get the continual "Loading data..." and then after it times out I get "Error loading file".
Before we changed to a secure http environment, our charts worked. After we changed to the new web layer, the charts do not work. The #HOST# substitution was set to http://correctservername/ and #HOST_PROTOCOL# was set to http. We set PlsqlCGIEnvironmentList REQUEST_PROTOCOL=https in the dads configuration file and now the #HOST# displays https but it also includes the default port number which we do not want (https://correctservername:port/) The charts work without the port. REQUEST_PROTOCOL is not in the cgi list and setting this variable set #HOST_PROTOCOL#. What variable can we set to make #HOST# correct. It seems like #HOST# is being set by #REQUEST_PROTOCOL#'://'||HTTP_HOST||':'||SERVER_PORT||SCRIPT_NAME||'/'. SERVER_NAME could also be used in of HTTP_HOST. I don't know how APEX is setting #HOST#. Does it come from a host alias somewhere in the environment?
I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.
I would rather not create a global variable (hard-coding) and create a new chart template using the global variable or create a before header application process to re-direct url without a port.
Edited by: Donna C-Houston on Oct 10, 2012 1:06 PM

Hi Donna,
changing the CGI environment variables HTTP_HOST, REQUEST_PROTOCOL and SERVER_PORT is the correct way how to resolve this, because it appears that your hiding the web server where you have installed mod_plsql or EPG by a different outside facing web server (also called reverse proxy). That's why APEX gets the host name, protocol and port of the internal web server, but should actually get the values of your reverse proxy web server. Can can fix that by changing the following CGI environment variables.
HTTP_HOST should just contain the domain name (no protocol or port). For example: www.oracle.com
REQUEST_PROTOCOL should contain http or https
SERVER_PORT should be the port for https
I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.The value of HTTP_HOST is wrong anyway and points to your internal web server, but I assume your developers actually want to get the host name of your external web server if they use it to generate absolute URLs. That's why I wouldn't bother and set it to the correct host name.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Can we set a variable used inside the template from the java code.

Hi everybody,
I am uploading template,sub template and data xml fle to generate the preview using XDO API's. My main template is calling a sub template so it needs to import the sub template in the main template.since i am uploading my files on a particular server,my subtemplates has been put on different path as specified in the main template.
so i need to change the subtemplate path dynamically at run time.
is there any way i can pass this information to my main template at run time.
one solution could be,my rtf template has a variable 'i' inside it,which is setting the file path to include my subtemplate like this :
<?xdoxslt:set_variable($_XDOCTX, i ,"import:file:///c:/Temp/htmlmarkup.xsl")?>
<?xdoxslt:get_variable($_XDOCTX, i )?>
now is there any way i can set this variable at run time from my external java code.?
Thanks,
Anuradha

Thanks for the response.
but i still am looking for the solution.
if both my template and subtemplate are in the same directory then atleast
<?import:file:../htmlmarkup.xsl?> should work.
but its not working...i m getting following error:
FOProcessor setData: C:\subtemplates\projects.xml
FOProcessor setLocale: en-us
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:514)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:192)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1535)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:925)
     at RTF2PDF.runRTFto(RTF2PDF.java:590)
     at RTF2PDF.runXDO(RTF2PDF.java:443)
     at RTF2PDF.main(RTF2PDF.java:237)
Caused by: java.io.FileNotFoundException: C:\Documents and Settings\fusion\htmlmarkup.xsl (The system cannot find the file specified)
     at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:782)
     at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:564)
     ... 15 more
please suggest me what to do..

Can I set session variables from inside my Javascript?

hi all,
i want to set a couple of session variable while i am inside my javascript.
can I do that?
m_asu

No. JavaScript runs on the client and the session is on the server. You can use JavaScript to set parameters that get passed back in the request and can then be put in the session.

How can I set 50 variables with the values that are inside an array?

Hello,
I have and array of numbers and an array of strings ( the name of the variables) These values are acquired every time from hardware.
Now I created a graphical interface with 53 of these variables, and I need to create a link to update them with the correct value.
Thanks
Dario
Attachments:
Example_insert_53_values_in_53_varialbes.vi ‏23 KB

Dario,
you have posted your question to the Profibus forum. As your question is not directly related to Profibus, but to LabVIEW programming, your better should post it to the LabVIEW forum.
Thanks
Jochen

RV016 - DHCP - Assign another Default Gateway IP

Maybe this is a simple issue for you but i couldnt solve it.
I am using a RV016 (192.168.1.2) as a router and DHCP. It automatically assigns its own IP which is 192.168.1.2 as a default gateway. And I can not set my RV016 to assign a static another Default Gateway IP of the server. The workstations will connect to internet via this server (192.168.1.1)
Any suggestions ?
Thanks, ....

Umut,
The RV016 does not give you the ability to assign a different gateway. If your users can get out via the 192.168.1.1 which means this servers must be doing routing as well. Which device in your network should be the default gateway ?
Thanks,
Jasbryan
Cisco Support Engineer

How to set #HOST# variable used in Chart template using Multiple Domains?

I have a extended question to How can I set #HOST# variable referenced in the Chart template?
In addition to the Proxy layer, we are looking to use multiple sub-domain names into the same Oracle APEX instance (through the one DAD) each mapped to a different application id. Therefore I don't think the solution in the link will work for me - as this embeds a single domain name in the DADS.CONF.
Two questions:
- Is it possible to set the "HTTP_HOST" in "dads.conf" using an existing HTTP Header value? - my proxy can pass on the original domain as "HTTP_X_FORWARDED_HOST". So if it was possible to use (say: using whatever form/syntax of parameterisation is available) ?
>
PlsqlCGIEnvironmentList HTTP_HOST=%{HTTP_X_FORWARDED_HOST}
>
If it can then that would work for me. It would be great if modl_plsql handled this out of the box as I understand the "X-FORWARDED" approach is pretty standard in the proxy world including passing on original IP addresses. Hitting an phpinfo() site shows headers
>
HTTP_X_FORWARDED_FOR     192.168.2.100
HTTP_X_FORWARDED_HOST     dev.mycompany.com:443
HTTP_X_FORWARDED_SERVER     mycompany.com
>
- Alternatively is it possible in APEX environment to set the #HOST# from the HTTP Header "HTTP_X_FORWARDED_HOST" if it exists for all requests?
Thanks

Hi Donna,
changing the CGI environment variables HTTP_HOST, REQUEST_PROTOCOL and SERVER_PORT is the correct way how to resolve this, because it appears that your hiding the web server where you have installed mod_plsql or EPG by a different outside facing web server (also called reverse proxy). That's why APEX gets the host name, protocol and port of the internal web server, but should actually get the values of your reverse proxy web server. Can can fix that by changing the following CGI environment variables.
HTTP_HOST should just contain the domain name (no protocol or port). For example: www.oracle.com
REQUEST_PROTOCOL should contain http or https
SERVER_PORT should be the port for https
I don't want to add a new cgi variable called HOST because HOST sounds so generic and it might interfere with something else running in our environment. Or, I don't want to change the plsql cgi environment variable (such as HTTP_HOST) because many developers may use owa_util.get_cgi_env('HTTP_HOST') to get the current server. If the SERVER_PORT is part of the #HOST# then what could I change it to if it needs to be null. If you leave it blank, then the default SERVER_PORT comes from the CGI variables.The value of HTTP_HOST is wrong anyway and points to your internal web server, but I assume your developers actually want to get the host name of your external web server if they use it to generate absolute URLs. That's why I wouldn't bother and set it to the correct host name.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

HT5114 Can I set up a student sub account under my iTunes id?

Can I set up a student sub account under my iTunes id?

You can't set up sub-accounts under another account

How to re-set session variables in OCI when a TAF callback is invoked ?

Can you show me an example of how to re-set NLS_DATE_FORMAT when the Failover ends ( that is, in OCI_FO_END )? All I see is the template code provided by Oracle to handle TAF event.
How to register TAF callback function

You can re-set the variable just like you set it at the beginning of the connection in the switch branch you mentioned.
Doesn't it work?

How can I set one loop's frequency as a slave of another loop ?

I have 2 loops in parallel. The first runs at 500Hz. The AIread controls the frequency. How can I set the second one at 100Hz ? It is very easy to set it with local variable, but really not clean. The second loop must not use the CPU while waiting the next 100Hz tick. Is it possible ? I am trying to use occurrence, but the second loop will always (I think) use CPU while waiting next tick !
Is it possible to set one loop in one thread and the other one in another thread ? Then set each thread to a CPU (I use a bi-xeon PC)
Thanks

cariboo wrote in news:5065000000080000001EBE0000-
[email protected]:
> I have 2 loops in parallel. The first runs at 500Hz. The AIread
> controls the frequency. How can I set the second one at 100Hz ? It is
> very easy to set it with local variable, but really not clean. The
> second loop must not use the CPU while waiting the next 100Hz tick. Is
> it possible ? I am trying to use occurrence, but the second loop will
> always (I think) use CPU while waiting next tick !
> Is it possible to set one loop in one thread and the other one in
> another thread ? Then set each thread to a CPU (I use a bi-xeon PC)
> Thanks
One solution is to place a case inside the loop which run at 500 Hz. Put
your 100Hz code inside the True case. Use the "Quot
ient & Remainder"
funtion and the iteration counter to execute the true case every fift
execution of the 500Hz loop.
This may not work if the 100Hz code use to much time, it will then delay
the 500Hz loop.
I would go for the occurences solution. The wait will use some CPU
resources while waiting but i don't think that should be any problem (when
done correctly).
Rolf

What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?

Hi All,
I am new to TestStand. Still in the process of learning it.
What are Parameters? How are they differenet from Variables? Why can't we use variables for passing data from one sequnece to another? What is the advantage of using Parameters instead of Variables?
Thanks in advance,
LaVIEWan
Solved!
Go to Solution.

Hi,
Using the Parameters is the correct method to pass data into and out of a sub sequence. You assign your data to be passed into or out of a Sequence when you are in the Edit Sequence Call dialog and in the Sequence Parameter list.
Regards
Ray Farmer

Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

How can i reuse same variables that i create using c:set var="index" /

hi all,
please some one helpme!!!!!!
how can i reuse same variable that i create using
<c:set var="index" value="${0}"/>
cause later in the program i use index to do some condition and based on that i increment ...
so for example if i say...
<c:if test="${index==0}">
<c:set var="index" value="${index+1}"/>
</c:if>
will it be like
if(index==0)
index++;
can i do like i did be4. if not what do i need to do to reuse. cause i use the variable atleast 5 time and its keep changing on diff condition level.

Have you tried it?
It should work, provided you are on the same page.
The c:set tag creates the variable in pageScope by default.
If you forward to another JSP you need to set the scope to be "request" so that it is still available.

I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier

I have 4 computers running Adobe CC under two different accounts (as 1 account can only be installed on two computers) i need it on a 5th computer now, do i need another account or can i set up something so all 5 run from the same account making it easier?

Check into a Team account
-http://www.adobe.com/products/creativecloud/teams/benefits.html
-assign a new team member http://forums.adobe.com/thread/1460939?tstart=0 may help
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0

Can we set a variable by assigning another variable to it

Similar Messages

Maybe you are looking for