Can we set the query timeout value in a global control place?

hi everyone,
We use the FullTextSqlQuery class to do query stuff, but we have the query timeout issue, the query sometimes timeout, sometimes is normal. I know there is a property from Query class called Timeout, and the default
time is 15 seconds, but we have lots of code involving FullTextSqlQuery.
I want to know is there a gloabal place like the web.config or regedit or somewhere to set the timeout value?
Thanks

Did you ever get an answer? I'm in the same boat...the only way I can seem to not charge tax to my wholesale clients is to set "tax never applies". But I got over 300 products...how can I do it "en mass"???
Anybody??
I tried creating a special tax code at 0% but that didn't do it either.
thanks in advance,
Scot.

Similar Messages

How do I set the IFSshell timeout value?

How do I set the IFSshell timeout value?
I open an ifsshell and move to a directory.
Do something. Come back in 10 minites and the shell has timed
out. Have to logout and log back in and move to the directory
again.
Thanks
-Mitch

FYI,
IFS.PROTOCOLSERVER.SESSION.DEFAULT.Timeout
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
in cup server configuration

How can I set the blocking timeout on a workstation client?

Hello.
I want to shorten the time it takes for an invocation of tpcall() to fail with TPETIME.
I've glimpsed how to do this when working within a transaction, but that is not my case, and I couldn't find how to set the blocking timeout. Can anyone help me with this? I'm working with Tuxedo 9.1.
Thanks in advance.

Cacho,
Tuxedo 9.1 includes the tpsblktime() API as described at
http://e-docs.bea.com/tuxedo/tux91/rf3c/rf3c67.htm#2180280 . This API
allows a programmer to set the blocking time for either the next potential
blocking API called by the program or for all subsequent potential blocking
APIs called by the program.
The Tuxedo administrator can set the global default blocking time by setting
the BLOCKTIME parameter in the *RESOURCES section of the UBBCONFIG file and
executing tmloadcf.
Ed
<Cacho Nakamura> wrote in message news:[email protected]..
Hello.
I want to shorten the time it takes for an invocation of tpcall() to fail
with TPETIME.
I've glimpsed how to do this when working within a transaction, but that is
not my case, and I couldn't find how to set the blocking timeout. Can anyone
help me with this? I'm working with Tuxedo 9.1.
Thanks in advance.

How can I set the query time out for SQVI?

Hi,
I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
Thanks for reading

Hello Srikrishna,
The SQVI is a dialog transaction and henc its governed by your system's rdisp/max_wprun_time parameter.
A dialog work process has a run-time limit that prevents users from interactively running especially long reports. By default, the system terminates any dialog work process in a transaction that exceeds 300 seconds. Although the value of the limit can be changed (in the system profile parameter rdisp/max_wprun_time), that limit is always in effect for dialog work processes. No such limit applies to background work processes.
Regards,
Siddhesh

How to set the EJB timeout value??

I made a Swing application connecting with EJB to provide some service. If I set the correct J2EE server IP, everything works fine. However, it will throw an Exception after some time, if I set an incorrect IP. I would like to ask if there is any means to set a timeout value for the Swing application that it throws an exception while it cannot connect to the server after the timeout value.

Hi,
Amount of time required to call an EJB on a remote server depends on, I would guess, multiple factors, like server performance, network speed, link quality, etc. I'm not sure if there is a direct way of telling the client-side code to wait for results for a limited amount of time, but in general blocking on the client side until the server results are available is not a good idea (at least not from the GUI perspective, since you would be locking the display). Either way, you could make all your EJB calls from a separate thread, and timeout that. This way your client code would have complete control of responsiveness of the server side.
Just a thought.
Mark

How can I setup the query timeout for SQVI in basis?

Hi,
I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
Thanks for reading

The memory is limited by the parameters
abap/heap_area_dia
abap/heap_area_nondia
abap/heap_area_total
which are system wide.
If a user requests more memory than those, the program will dump.
Markus

How can I set the lock timeout ???

I got to a point where I needed to increase my initrans since I got an ITL lock ...
I dont know why the database did not return an exception after many hours....
is there any parameter I can set so in case of LOCK it will throw an exception ?
I know I can use "select for update..nowait" or "select for update wait n"...
but that does not help me with UPDATE statements or such ITL deadlocks...
(using 9.2.0.4)
Thanx

Hello nirbasson,
I got to a point where I needed to increase my initrans since I got an ITL lock ...How did you analyze the problem or how did you reproduce it.... because there must be many updates to the same block to get this problem (because of the ITL slots itself and the fill up of the block with the ITL slots if needed)
but that does not help me with UPDATE statements or such ITL deadlocks...If you got an ITL deadlock ... oracle will determine this problem and write a trace file and put an ORA-error into the alert.log ... after that the "problem" will be eliminated by oracle.
If you do an update statement... and another session wants to update the same block.. no.. there is no timeout... besides the 2 sessions are blocking them self. Then a deadlock is triggered and the issue is solved by oracle.
lets say I am doing an update to same record from 2 different sqlplus sessions :
update X set Y=5;Ok but this has nothing to do with an ITL Wait.
Regards
Stefan

Can you set the Tax Code value in the Product Import File to "Tax Never Applies"?

We have taxable and non-taxable items in our store and I need to be able to set all non-taxable food items to "Tax Never Applies" in the Product Import document. Does anyone know a work around for this? Applying this setting to hundreds of items is not ideal at all.
Many thanks in advance!
-Eric

Did you ever get an answer? I'm in the same boat...the only way I can seem to not charge tax to my wholesale clients is to set "tax never applies". But I got over 300 products...how can I do it "en mass"???
Anybody??
I tried creating a special tax code at 0% but that didn't do it either.
thanks in advance,
Scot.

Can I set the values number of the parameter LOV?

Hi.
Can I set a number of values in a report prompt LOV? Now is 5 values (All + 4 values of the query). I would like to have 4 o 3 values...
Thank you, bye.
R.

Can you please restate your question? It is not clear you would like to get
regards
Jorge

How can I set the value to a session bean from backing bean

Hi Experts,
How can I set the value to a session bean from backing bean where I have created getter and setter
methods for that variable.
Basically I am using ADFUtils class where I am able to get the value from session bean
using following expression
String claimType =
(String)ADFUtil.invokeEL("#{ClaimValueObj.getClaimType}");
Thanks
Gayaz

Gayaz,
Wrong Post !!
Post in JDeveloper and ADF
Thanks
--Anil

Can I set the value of kernel paramaters less than default in Solaris 10?

Can I set the value of kernel paramaters less than default in Solaris 10? If specified less than default values for kernel parameters in /etc/system, system is getting default values for such as SHMMAX, SEMMSL, SEMOPM. Is the default kernel parameter values the minimum values in Solaris 10?
-Yong

Yes, but not through /etc/system.
/etc/system is the old way to do it. As a backward compatibility, it will allow lines there to increase parameters but not decrease them. This is on the theory that many memory defaults were significantly increased, and older /etc/system setups were trying to increase small defaults, not decrease large ones).
Use prctl and set up a project.
Darren

What is the default timeout value for the SPQuery object?

What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

Hi,
Do you want to avoid timeout when you query list items?
If so, we can use the following C# code to set timeout.
HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
More information is here:
http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Can we set the dynamic data source when using getReportParameters() ?

Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephanie

report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem

Set the default field value to transaction code field, when calling from WD

Hi all,
Can we pass the value in a input field of a standard transaction calling from WD application. Suppose we are calling a transaction VA03 in an external window, then how will be pass the value in the VBAK_VBELN screen field.
Is there any way to pass the value to this transaction field. I have also tried out to set the parameter ID 'AUN' for VA03 transaction VBELN field. But it did not work for me.
Is there any way to set the default field value to transaction code field, when calling from WD?
Please suggest, if anyone have any idea.
Thanks
Sanket

Hi,
I am using the below code to open a standard transaction. It will help you to explain my point more easily.
DATA: url TYPE string,
          host TYPE string,
          port TYPE string.
*Call below method to get host and port
cl_http_server=>if_http_server~get_location(
     IMPORTING host = host
            port = port ).
*create URL
CONCATENATE 'http'
'://' host ':' port
'/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'VA03'
   INTO url.
*get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
lo_window->open( ).
Note*
One more query I want to add to this thread, that is there any possibility to call a custom transaction as well?

Create Report Layout (Apex 3.2) - How can I set the substitution variables?

Hi,
I created a "Report Query" under "Shared Components". I now want to work on the corresponding "report layout". I created a "Generic Columns (XSL-FO)". I read the following in the documentation:
The following are valid substitution strings:
#PAGE_HEADER#
#PAGE_HEADERFONT_COLOR#
#PAGE_HEADER_FONT_FAMILY#
#PAGE_HEADER_FONT_SIZE#
#PAGE_HEADER_FONT_WEIGHT#
#PAGE_FOOTER#
#PAGE_FOOTER_FONT_COLOR#
#PAGE_FOOTER_FONT_FAMILY#
#PAGE_FOOTER_FONT_SIZE#
#PAGE_FOOTER_FONT_WEIGHT#
#PAGE_WIDTH#
#PAGE_HEIGHT#
#HEADER_BG_COLOR#
#HEADER_FONT_COLOR#
#HEADER_FONT_FAMILY#
#HEADER_FONT_SIZE#
#HEADER_FONT_WEIGHT#
#BODY_BG_COLOR#
#BODY_FONT_COLOR#
#BODY_FONT_FAMILY#
#BODY_FONT_SIZE#
#BODY_FONT_WEIGHT#
#BORDER_WIDTH#
Where can I set the values for these substitution variables in my "Report Layout"? Could someone give an example? I can't seem to find documentation on this.
Thanks!
Francois

Thanks for the tip however I'm not trying to do this through the print tab, I'm calling the report using the following get_print_document in pl/sql code:
l_report_blob := apex_util.get_print_document(
p_application_id => l_application_id,
p_report_layout_name => l_report,
p_report_query_name => l_report,
p_report_layout_type => l_output_format,
p_document_format => l_output_format,
p_print_server => null);
Where could I set these substitution variables ? I'm simply calling a report query and layout created under Shared Components.
Thanks
Francois

Can we set the query timeout value in a global control place?

Similar Messages

Maybe you are looking for