How do I set the IFSshell timeout value?

How do I set the IFSshell timeout value?
I open an ifsshell and move to a directory.
Do something. Come back in 10 minites and the shell has timed
out. Have to logout and log back in and move to the directory
again.
Thanks
-Mitch

FYI,
IFS.PROTOCOLSERVER.SESSION.DEFAULT.Timeout
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
IFS.PROTOCOLSERVER.SessionStateTimeoutPeriod
in cup server configuration

Similar Messages

  • How can I set the blocking timeout on a workstation client?

    Hello.
    I want to shorten the time it takes for an invocation of tpcall() to fail with TPETIME.
    I've glimpsed how to do this when working within a transaction, but that is not my case, and I couldn't find how to set the blocking timeout. Can anyone help me with this? I'm working with Tuxedo 9.1.
    Thanks in advance.

    Cacho,
    Tuxedo 9.1 includes the tpsblktime() API as described at
    http://e-docs.bea.com/tuxedo/tux91/rf3c/rf3c67.htm#2180280 . This API
    allows a programmer to set the blocking time for either the next potential
    blocking API called by the program or for all subsequent potential blocking
    APIs called by the program.
    The Tuxedo administrator can set the global default blocking time by setting
    the BLOCKTIME parameter in the *RESOURCES section of the UBBCONFIG file and
    executing tmloadcf.
    Ed
    <Cacho Nakamura> wrote in message news:[email protected]..
    Hello.
    I want to shorten the time it takes for an invocation of tpcall() to fail
    with TPETIME.
    I've glimpsed how to do this when working within a transaction, but that is
    not my case, and I couldn't find how to set the blocking timeout. Can anyone
    help me with this? I'm working with Tuxedo 9.1.
    Thanks in advance.

  • How to set the EJB timeout value??

    I made a Swing application connecting with EJB to provide some service. If I set the correct J2EE server IP, everything works fine. However, it will throw an Exception after some time, if I set an incorrect IP. I would like to ask if there is any means to set a timeout value for the Swing application that it throws an exception while it cannot connect to the server after the timeout value.

    Hi,
    Amount of time required to call an EJB on a remote server depends on, I would guess, multiple factors, like server performance, network speed, link quality, etc. I'm not sure if there is a direct way of telling the client-side code to wait for results for a limited amount of time, but in general blocking on the client side until the server results are available is not a good idea (at least not from the GUI perspective, since you would be locking the display). Either way, you could make all your EJB calls from a separate thread, and timeout that. This way your client code would have complete control of responsiveness of the server side.
    Just a thought.
    Mark

  • Can we set the query timeout value in a global control place?

    hi everyone,
    We use the FullTextSqlQuery class to do query stuff, but we have the query timeout issue, the query sometimes timeout, sometimes is normal.  I know there is a property from Query class called Timeout, and the default
    time is 15 seconds, but we have lots of code involving FullTextSqlQuery.
    I want to know is there a gloabal place like the web.config or regedit or somewhere to set the timeout value?
    Thanks

    Did you ever get an answer?  I'm in the same boat...the only way I can seem to not charge tax to my wholesale clients is to set "tax never applies".  But I got over 300 products...how can I do it "en mass"???
    Anybody??
    I tried creating a special tax code at 0% but that didn't do it either.
    thanks in advance,
    Scot.

  • How do I set the Checkbox Export value to numeric?

    I am attemting to analyze the data in my forms.  In order to do so, I am exporting the data into a spreadsheet.  There are about 50 check boxes in the form that I am tabulating.  The default export values are "Yes" and "Off".  My preferred values are 1 and 0, which greatly simplify analysis of the data.  I can set the "Yes" value to "1", but I can't find a way to set the "Off" value to "0".  As it stands, I have to go through the list and delete all "Off" values to have them work in my spreadsheet.
    How do I create a numeric value on the check box?  Is there a more graceful way of analyzing data from forms?  Am I missing something.
    Here are some recommendations.  By default, make the checkbox export 1 and 0.  When the export value for  a checkbox is set to a numeric value, set the unchecked value to 0.  Provide a place to set the export value of an unchecked checkbox.

    You can't change the default "Off" value of a check-box. Just write a macro or script to replace all the instances of "Off" with "0". Shouldn't be too complicated... Another option is to use radio-buttons and set their values to 0 and 1. Set the "0" button as selected by default and you're guaranteed to get one of those values in your output (since it's not possible to "unselect" a radio-button group).
    Feature requests can be made here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • How can I set the lock timeout ???

    I got to a point where I needed to increase my initrans since I got an ITL lock ...
    I dont know why the database did not return an exception after many hours....
    is there any parameter I can set so in case of LOCK it will throw an exception ?
    I know I can use "select for update..nowait" or "select for update wait n"...
    but that does not help me with UPDATE statements or such ITL deadlocks...
    (using 9.2.0.4)
    Thanx

    Hello nirbasson,
    I got to a point where I needed to increase my initrans since I got an ITL lock ...How did you analyze the problem or how did you reproduce it.... because there must be many updates to the same block to get this problem (because of the ITL slots itself and the fill up of the block with the ITL slots if needed)
    but that does not help me with UPDATE statements or such ITL deadlocks...If you got an ITL deadlock ... oracle will determine this problem and write a trace file and put an ORA-error into the alert.log ... after that the "problem" will be eliminated by oracle.
    If you do an update statement... and another session wants to update the same block.. no.. there is no timeout... besides the 2 sessions are blocking them self. Then a deadlock is triggered and the issue is solved by oracle.
    lets say I am doing an update to same record from 2 different sqlplus sessions :
    update X set Y=5;Ok but this has nothing to do with an ITL Wait.
    Regards
    Stefan

  • How do i set the ConnectionFactory timeout

    Hello
    I hope someone can help me to answer my question. I actually need some help to set the timeout period to shorter time when i do lookup in connectionFactory.
    Currently It takes about 75 second if there is no connection between my server and client station. After 75 second i can get back the error message. Is there any configuration file to set the timeout period to 20 second? I called using the following code.
    try
    Context ictx = new InitialContext(t);
    String cfStr = System.getProperty("myserver.connectionfactory");
    ConnectionFactory cf = (ConnectionFactory)ictx.lookup(cfStr);
    catch(Exception e)
    Thanks

    Hi,
    I'm afraid there is no defined timeout to set as defined by JMS specification.
    If one exists with the provider you use, then probably you have to set a System property in your environment or in some file.
    The provider I've used so far, (MQ Series, Jonas, JBoss) responds synchronously with an exception when something is wrong.
    Hope this helps.
    Pierre-Yves
    http://pyfourmond.free.fr

  • Running T-code miro, how should i set the DRSEG-SGTXT value automatically

    Hi experts,
    When i run t-code miro, i want to fill into the text value(DRSEG-SGTXT) on the item line automatically.
        Its value is the PO description by default. I has tested the user exits (Related to T-Code MIRO,such as LMR1M001/002/003/004 etc) and badi(INVOICE_UPDATE). They can't work very well.
       I'd like to input Purchasing Document Number and enter, material items are display and its text value(DRSEG-SGTXT) is also filled in.  
    Any clue is appreciated.
    - Daniel

    Hello,
    start the report RSMODPRF and see the documentation.
    http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
    There are some threads in SDN for this topic, you can search in SDN
    Kind regards,
    JP

  • How can I set the value to a session bean from backing bean

    Hi Experts,
    How can I set the value to a session bean from backing bean where I have created getter and setter
    methods for that variable.
    Basically I am using ADFUtils class where I am able to get the value from session bean
    using following expression
    String claimType =
    (String)ADFUtil.invokeEL("#{ClaimValueObj.getClaimType}");
    Thanks
    Gayaz

    Gayaz,
    Wrong Post !!
    Post in JDeveloper and ADF
    Thanks
    --Anil                                                                                                                                                                                                                               

  • How to programmatically set the value to current Page layout property?

    Hi,
    How do I set any text value to the current page layout [comment] property and save it.....here my current page is using a custom page layout called spPageLayout1
    To be very much generalized how I can set and save any value to current page property programmatically....on load event I need to set the value.
    It is a publishing page layout.

    Hi,
    According to your post, my understanding is that you want to set the value to current Page layout property.
    To get current page property, you can refer to:
    How to get current Pages details in SharePoint2010 publishing site
    Get Content Field Value in Article Page
    To get current page layout property, you can refer to:
    PublishingPage.Layout Property (Microsoft.SharePoint.Publishing)
    PageLayout.Title Property (Microsoft.SharePoint.Publishing)
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • What is the default timeout value for the SPQuery object?

    What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
    Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

    Hi,
    Do you want to avoid timeout when you query list items?
    If so, we can use the following C# code to set timeout.
    HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
    More information is here:
    http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
    The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • How i can set the selected item of a dropDown component from java code

    Hi
    Thank you for reading my post
    How i can set the slected item of a DropDown component from backing beans java code ?
    it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
    In back code i have both value and display values to use them .
    can some one give me some help ?
    Thanks ,

    See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
    See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
    It says
    One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

  • How can i set the alternating colors for a table rows

    Dear All,
    Please any one help me how can i set the Alternating colors for Table Rows.
    i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

    Hi,
    The design property in Table properties should work for your requirement. Select "alternating" value for design.
    Please see the API below:
    design
    Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
    alternating - The table rows are displayed alternately in a different color.
    standard - The table background has one color. The individual table rows are displayed with grid net lines.
    transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
    Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
    Regards,
    Jaya.
    Edited by: VJR on Jun 17, 2009 6:43 PM

  • How can i restrict the Expenditure Type values at a specific OU ?

    Dear Guys,
    I would like to ask about the Expenditure Types,
    I have implemented two projects for different Operating Units ,
    when navigating to any Projects responsibilty,and navigating the Expenditure Type field
    the values exist are all the values implemented across the OU not the values entered at this OU
    How can i restrict the Expenditure Type values at a specific OU
    Regards
    Amr Hussien

    Hello
    When you set up a project there is an option called Transaction Control.
    This option allow you to list the allowed or restricted elements of costs for the project.
    You may enter the transaction control on a project template and that will be copied to any new project.
    The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
    In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
    Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
    Dina

  • How do I set the default text in a bound textbox?

    How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
     I have the following code (see below), but for some reason it does work when I put the code in the
    AddNewItem_Click event; however, it does work if I put it in the
    Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
    What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
    event?
       Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
    Me.txtBusUsagePct.Text = "100"
       End Sub
    BobV365

    Hello,
    Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
    Public Class Form1
    WithEvents bsData As New BindingSource
    Private Sub Form1_Load(
    ByVal sender As System.Object,
    ByVal e As System.EventArgs) Handles MyBase.Load
    Using MockedData As New DataTable()
    MockedData.Columns.AddRange(New DataColumn() _
    New DataColumn("PartName", GetType(String)),
    New DataColumn("partqty", GetType(Int32))
    MockedData.Rows.Add(New Object() {"Part A", 100})
    MockedData.Rows.Add(New Object() {"Part 99", 34})
    MockedData.Rows.Add(New Object() {"Part B", 4})
    bsData.DataSource = MockedData
    End Using
    CType(bsData.DataSource, DataTable).AcceptChanges()
    BindingNavigator1.BindingSource = bsData
    TextBox1.DataBindings.Add("Text", bsData, "Partname")
    TextBox2.DataBindings.Add("Text", bsData, "partqty")
    End Sub
    Private Sub bsData_AddingNew(
    ByVal sender As Object,
    ByVal e As System.ComponentModel.AddingNewEventArgs) _
    Handles bsData.AddingNew
    Dim dv As DataView = TryCast(bsData.List, DataView)
    Dim rv As DataRowView = dv.AddNew()
    rv("PartName") = "(new)"
    rv("partqty") = 0
    e.NewObject = rv
    bsData.MoveLast()
    End Sub
    End Class
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
    but do not reply to forum questions.

Maybe you are looking for