Can we submit the module pool code in background as a job.

Hi All,
Is there any possiblity that, we can capture the module pool program screen element, and run the process in background as a job using the same logic as module pool program.
In other words, can we have any feasible solution to have push button on the transaction screen of a module pool  program, after clicking which, it will capture all the screen elements of module pool program and using the same logic of module pool program it will submit a job in background and process the data.
Any hep will be appreciated.
Thanks in adv.
Regard,
Vivek.

Hi Prasenjit,
Thanks for your reply.
My question is, can we use "SUBMIT" statement in module pool program so as it will submit job in backgroung.
The same logic of module pool we will write in executable statement and submit in background using SUBMIT. will this thing is feasible. I am trying the same. Anyways thanks.
Regards,
Vivek

Similar Messages

  • How can I run a Module pool program in Background

    Hi all,
           I have created report program and called a dialog screen e.g call screen 0100.
    this screen contains only one table control and a tabstrip control which allows user to select diffrent options.there is a push button on the application tool bar named as Background. once u click , the report has to run in background.
    if its a selection screen , i can easily create a variant n can run it in background.but here its a dialog screen, i m unable to create a variant for it. can anybody tell me how can i saves the user input values and run in background ..plz help me ....
    Bishnu Dash

    Hi ..
    Create a Transaction code for this Program.
    Then implement the BDC Code to Process the SCreens with the Required input Values.
    Schedule this BDC Session in Backgound using RSBDCSUB.
    reward if Helpful.

  • How to copy the module pool program ( Screens, codeing ) ?

    Hi guys,
           How can I copy the Module pool program to another program including screen and every thing?
          can anyone help me....

    1. GO TO SE80, and select program from drop down
    2. Enter Source Prog Name and press enter
    3. Below Object name, right click on the program
    4. Select COPY and enter the (New) Target Prog Name
    it ll ask for following check box options
    -Source
    -Text Element
    -Documentation
    -Variant...etc.
    5 Select all and press enter.
    Hope this ll be helpful.
    Thanks & Regards
    Vinsee

  • How to down load the Module pool program from sap

    hi friends,
    i am having the Module pool program in one server
    it consists of 1 screen.
    now i want to down load the Module pool program into another server.
    those two server are not linked.
    is there any way to copy from one server to another server.
    like what we do in smartfroms,that is downloading form and uploading the form.

    Hi,
    You can down load code from source system and u can upload those in your destination system. You can down load  Code as normally like    execute SE38 > enter ur program name> click on change button> Utilities(in menu bar)->more utilities>upload/down load>down load  in source system & Just use same path with upload instead of down load. So this will help u to transfer code from one system to other.
    Screens transfer: SE51> enter ur program name & screen no> click on change button> click on Layout button> Utilities(m)>upload/download>download for down loading a screen from source system.
             And follow the same procedure in destination system also just use up load instead of download. to upload a screen in destination system.
    Hope useful.
    Regards,
    BBR.

  • How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

    Please help!!
    How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

    Thank you for your answers, it helps me a lot.
    But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

  • How many times can you enter the wrong pin code on an iphone before it resets?

    How many times can you enter the wrong pin code on an iphone before it resets itself?

    Hey Robin.T,
    Thanks for the question. The following article provides the answer to your question:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
    iPhone is disabled
    iPad is disabled
    iPod touch is disabled
    You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
    Thanks,
    Matt M.

  • How can i find the value category code in CJVC

    Hi Gurus
    how can i find the value category code in CJVC and which tables its stored.can any one tell me.please please

    Read TPIK3 in an internal table, then search COEP-KSTAR in this table, with KSTAR between TPIK3-KSTRF and TPIK3-KSTRT, and other keys like Controlling Area and application/component (eg "PS" in project-system as in CJVC or "PM" in Maintenance as in IW33, multiple application use this table). You can also use a FM like PS_FIND_ACPOS_FOR_KSTAR.
    Regards,
    Raymond

  • How can I check to see if there is money left on an iTunes card if I can't read the scratch off code?

    How can I check to see if there is money left on an iTunes gift card if I can't read the scratch off code?

    Sorry, but other than trying to redeem the card there's no way to check whether it is still valid or was previously redeemed.
    Regards.

  • How to print the Module pool screen using a push button in the screen

    Hi Every one,
                         i have developed a module program , which have a selection screen and it display the output in a structured way.
    output includes boxes, texts etc...
    my problem is :---
    How to print the Module pool screen using a push button in the screen.

    When the "Print" button is pressed:
    leave to list-processing and return to screen 100.  "(current screen)
    Call a transaction that runs your print program.
    Rob

  • How can I save the modulation I apply to an instrument during recording such that it remains during playback?

    How can I save the modulation I apply to an instrument during recording such that it remains during playback? For example, I apply modulation #8 during recording, but when I play the track back the modulation is not incorporated.

    Hi Vlad,
    Unfortunately, I don't think there is a way to programmatically read the voltage output to the drive, as the voltage is all determined internally by the controller circuitry on the board. Depending on the controller though, you may be able to physically route the output terminal to a spare analog input channel and read in the voltage that way. This example Analog Input with 73xx Motion Card shows you how to program LabVIEW to do this. 

  • Regarding exit from the module pool screen

    h experts,
    i have developed a module pool report in which in the selection screen i have four fields which are mandatory ,when i execute the program without entering in the selection screen it do not allow to come out of the module pool screen ...what i want that without entering any input in the selection screen if i press exit button push button it will allow to come out of the screen for this what sud i do plz help me....

    Hi
    keep a button called <b>EXIT</b> on the screen
    Make the function type of that field as <b>E</b>
    in Flow logic write
    PROCESS AFTER INPUT.
    Forced Exit from the transaction from screen
      MODULE exit AT EXIT-COMMAND.
    double click on exit module and
    then in PAI write
    *&      Module  exit  INPUT
    Exit from the Transaction
    MODULE exit INPUT.
      CASE okcode.
        WHEN 'EXIT' OR 'CANCEL'.
          CLEAR okcode.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE.                 " exit  INPUT
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to degub the module pool program

    Hi friends,
    could anyone tell me "How to degub the module pool program"...!!
    Thanks in advance..!!

    Hi
    Debugging of module pool is same as reports, use /h or put breakpoint
    but u shud know what u want to check
    there are generally two event used in module pool
    PBO
    This event is used before displaying the screen,It is used to clear fields table, show table control, tabstrip and most important conditionally modify the scrren .
    PAI
    is used to validate the fields which are entered on the screen with database values and then fetch records from table.
    i mean all values to make available in internal table
    now u would be sure which part u want to debug.
    Rewards if helpful..............

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

  • How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) inpu

    HI Experts,
    Pls. clarify that, How can I pull the BUKRS (company code) value, for a X_USER (sy-uname) as input?
    ThanQ.

    Check with USRM1 Table
    give user name (Uname ) and you get company code (BUKRS)
    also check with other tables : USRM* in SE11
    Thanks
    Seshu

  • HT201304 I can't remember the four digit code to access the Restrictions settings.  Is there a way of resetting it?

    I can't remember the four digit code to access the Restrictions settings.  Is there a way of resetting it?
    I set restrictions on a child's iPod and can't remember the code to change them.

    Apple Unsavvy wrote:
    Thanks.  Do you know how many attempts I get before the iPod locks?
    No, but you will probably be warned.  Also if you happen to have a backup from before you set your Restrictions you can do a restore from that backup.  But if the latest backup was done after you set the restrictions, you are out of luck.

Maybe you are looking for